QF - Defects Recording
The following messages are stored in message class QF: Defects Recording.
It is part of development package QF in software component QM-QN-DEF. This development package consists of objects that can be grouped under "QM defects recording".
It is part of development package QF in software component QM-QN-DEF. This development package consists of objects that can be grouped under "QM defects recording".
Message Nr ▲ | Message Text |
|---|---|
| 000 | *** Messages for defects recording |
| 001 | Insp.lot & already blocked by &- serial number maintenance not possible |
| 002 | Enter the number of items |
| 003 | Select entries first |
| 004 | Internal error during item number assignment |
| 005 | Report category & not available |
| 006 | Confirmation profile & does not exist |
| 007 | No quality notification type maintained for inspection lot type & |
| 008 | Defects can only be recorded at the lot level for the current insp.lot |
| 009 | Defects cannot be recorded for the characteristic |
| 010 | No item data is available for the header data |
| 011 | The cursor is not on a valid line |
| 012 | Internal error reading detail data |
| 013 | Default values were copied |
| 014 | Save not necessary |
| 015 | No catalog profile maintained for report type & |
| 016 | Defects for inspection lot & are blocked by & |
| 017 | System block could not be set- internal error |
| 018 | Operation & for inspection lot & is blocked by & |
| 019 | No report category could be determined automatically |
| 020 | Internal error determining the report category |
| 021 | Required entry not made |
| 022 | Defects already recorded for the selected object- only update possible |
| 023 | No defects have been recorded yet for the selected object |
| 024 | Error in internal table processing- table & |
| 025 | Clipboard is empty- internal error |
| 026 | The transfer parameters are inconsistent- internal error |
| 027 | Internal error with action & in table & |
| 028 | Function is not possible for completed item(s) |
| 029 | Updating selections |
| 030 | Text for operation not available |
| 031 | Status object & blocked by user & |
| 032 | Function is not possible for item(s) that have not yet been activated |
| 033 | Serial number profiles & not available |
| 034 | Serial number & cannot be used in inspection lot & |
| 035 | Serial number & for material & is already blocked by & |
| 036 | Serial numbers for inspection lot &, material & not available |
| 037 | No selection was made |
| 038 | No serial numbers have been created for inspection lot &, material & |
| 039 | Enter code group and code or use selection |
| 040 | New item has been inserted |
| 041 | You cannot delete closed items |
| 042 | Deleting entries |
| 043 | Function is not possible for item(s) that have already been activated |
| 044 | The notificiation types for the marked items are not identical |
| 045 | Creating serial numbers for inspection lot & is blocked |
| 046 | No further entries selected |
| 047 | Internal serial number management error |
| 048 | No quality notification type has been defined for inspection type & |
| 049 | Defect data for inspection lot & is being saved |
| 050 | This line cannot be selected |
| 051 | List contains defect records that are not yet saved |
| 052 | Automatic assignment of report category to work center is not possible |
| 053 | Masked plant '*' only permissible for masked work center '*' |
| 054 | Masking with '*' only possible as last character |
| 055 | Plant & cannot be found |
| 056 | Work center & is not available |
| 057 | No notifications have been created for the selected defect records |
| 058 | Only notifications for posted defect records can be displayed |
| 059 | Entries generated by valuation cannot be deleted manually |
| 060 | Code group &, code & not available- use possible entries help |
| 061 | Function group & was called with impermissible activity & |
| 062 | No report category was entered |
| 063 | No inspection lot was entered |
| 064 | New defect item(s) activated automatically |
| 065 | Marked defect item(s) activated |
| 066 | Internal error determining work center &, plant & |
| 067 | Report category & for operation &, work center &, plant & not allowed |
| 068 | Defect items were automatically activated |
| 069 | Subsystem indicator can only be set once for plant &, work center & |
| 070 | Inspection lot & is already blocked by &- only display is possible |
| 071 | Quality notification was activated automatically using defect class |
| 072 | Function is not possible for item(s) that have already been activated |
| 073 | Defect item & is already completed- only display is possible |
| 074 | You have not entered a report type |
| 075 | Only the codes of the selected set & for plant & are displayed |
| 076 | Cannot draw a new number from number range object QDEFECTID |
| 078 | Cannot transfer defect with internal ID &1 |
| 079 | Error occurred while fetching notification data |
| 080 | Defects recording w/o reference to an insp. point |
| 081 | You cannot delete the defects assigned to an insp. point or sample |
| 082 | You can only display the defects assigned to an insp. point |
| 083 | Defect & & could not be generated |
| 084 | Item '&' cannot be deleted, tasks were created |
| 085 | Inspection lot & could not be found |
| 086 | Defect &2 locked by &1 |
| 087 | You are not authorized to change a defect in plant &1 |
| 088 | You are not authorized to delete a defect in plant &1 |
| 089 | You are not authorized to create a defect in plant &1 |
| 090 | You cannot record any additional defects for the inspection lot |
| 091 | A quality notification is created for the inspection lot |
| 092 | No defect was supplied for the action |
| 093 | This action is only possible for one defect |
| 094 | Save the defect before you assign it to a notification |
| 095 | 'Continue in Notification' is not possible for this defect category |
| 096 | Defect &1 cannot be assigned to a notification because tasks exist for it |
| 097 | Defect &1 was deleted |
| 098 | Defect &1 is already part of problem-solving process &2 |
| 099 | Cannot determine defect &1 |
| 100 | Update termination - table & SUBRC = & |
| 101 | Insp. lot & is currently being processed by & |
| 102 | Code group & code & not in selected set &; Use possible entries help |
| 103 | You require additional authorizations to create defects |
| 104 | You require additional authorizations to change defects |
| 105 | You require additional authorizations to delete defects |
| 106 | You require additional authorizations to display defects |
| 107 | Cannot determine defect because of task &1 |
| 108 | Cannot retrieve defect data |
| 109 | Error while syncing notification data |
| 110 | Confirmation no. & for characteristic does not belong to insp. lot & |
| 111 | Display only, since the notif. is being processed for the insp. lot |
| 112 | Cannot transfer defect with internal ID &1 |
| 113 | Status &2 of notification &1 does not allow transfer of defects |
| 114 | Plant must be entered together with the storage location |
| 115 | Storage location &1 cannot be found in plant &2 |
| 116 | Plant must be entered together with the production supply area |
| 117 | Production supply area &1 cannot be found in plant &2 |
| 118 | Warehouse must be entered together with the source storage type |
| 119 | Source storage type &1 cannot be found in warehouse &2 |
| 120 | Warehouse must be entered together with the source storage bin |
| 121 | Source storage bin &1 cannot be found in warehouse &2 |
| 122 | The current defect was recorded using report type & |
| 123 | Completed notification set in process due to new item(s) |
| 124 | Defects cannot be deleted |
| 125 | Defect &1 is already deleted or transferred |
| 126 | Defect transfer stopped, solve validation error |
| 127 | You cannot enter both a source storage bin and a production supply area |
| 128 | Product &1 is serialized but this defect category does not support this |
| 130 | You cannot enter a text without confirming the catalog |
| 131 | You cannot enter a text without confirming the short text |
| 132 | You can only enter a text after you have created the item |
| 133 | An internal error occurred while saving long text for defect &1 |
| 134 | No description was entered |
| 135 | Defect &1 is not in the database |
| 136 | The function is not supported |
| 137 | Code and code group required for defect category &1 |
| 138 | Provide a value for both code and code group or for neither of them |
| 139 | No long text added because no original language found |
| 140 | Enter value greater than zero as quantity |
| 141 | Enter unit of measure as quantity |
| 142 | Unit of measure has been adjusted to base uom of material &1 |
| 143 | Production order must be entered together with operation and sequence |
| 144 | Operation '&1' does not exist in sequence '&2' for production order '&3' |
| 145 | Node number '&1' does not exist for production order '&2' |
| 146 | Defect category &1 does not exist; you will not be able to save. |
| 147 | Multiple long texts with text ID '&1' for one defect are not supported |
| 149 | Serial no. &3 already exists for confirmation no. &1, item no. &2 |
| 150 | You cannot change the serial number since long texts were entered |
| 151 | You can only use the function for newly created serial nos. after saving |
| 153 | Changing the object list for the insp. lot can affect defects recording |
| 154 | You can no longer change the object list for the serial number |
| 155 | Serial number &1 can no longer be changed |
| 160 | Value & does not exist or is not allowed for field & |
| 161 | Warehouse of storage location &1 not found or is not managed with EWM |
| 162 | Warehouse &1 of storage location &2 is not managed with embedded EWM |
| 170 | Value & in field & is not allowed for notification type & |
| 171 | Catalog entry & for object & is incomplete |
| 172 | Assembly & does not exist |
| 173 | Value & of item number & is not unique |
| 175 | You cannot record serial numbers for inspection lot & |
| 176 | Catalog profile & does not allow a unit for the defect valuation |
| 177 | Unit & is not allowed for the defect valuation |
| 178 | You must enter a serial number to confirm inspection lot & |
| 179 | Operation incomplete: You must always have entries in 'PLNFL' and 'VORNR' |
| 180 | No inspection lot exists |
| 181 | More than one inspection lot exists |
| 184 | Please provide routing number for operations and operation internal ID |
| 185 | Routing number for operations &1 is not valid for production order &2 |
| 186 | No defect code group was entered |
| 187 | No defect code was entered |
| 188 | Defect code group &1 and code &2 are not valid |
| 189 | No defect cause code group was entered |
| 190 | No defect cause code was entered |
| 191 | Defect cause code group &1 and code &2 are not valid |
| 192 | No defect location code group was entered |
| 193 | No defect location code was entered |
| 194 | Defect location code group &1 and code &2 are not valid |
| 195 | Order &1 is not a production order |
| 196 | Defect &1 set to in process |
| 197 | Defect &1 completed |
| 198 | Defect &1 set to not relevant |
| 199 | Defect &1 cannot be completed, it still has outstanding quality tasks |
| 200 | Defect &1 cannot be set to not relevant, it still has outstanding tasks |
| 201 | You cannot record results for insp. lot & |
| 202 | Reference data for inspection lot was added to newly created item(s) |
| 203 | Not all items for inspection lot & can be processed |
| 207 | Select an assignable code; code &1 is inactive |
| 208 | Select an assignable code; code group &1 of code &2 is not released |
| 209 | Select a code that is assignable |
| 210 | Specify type of affected object to be created |
| 211 | Defects of this category do not support the adding of affected objects |
| 212 | Specify code group and code, and select at least one affected object |
| 213 | &1, &2 is not a valid code group and code combination for quality task |
| 214 | Quality task cannot be created |
| 215 | &1 cannot be interpreted as list of affected object IDs |
| 216 | Action cannot be executed; data is incorrect or missing |
| 217 | A follow-up action is still open for affected object #&1 |
| 218 | Affected object #&1 has quantity 0 |
| 219 | Affected object #&1 has no quantity unit |
| 220 | You cannot generate defect records automatically for notification type & |
| 221 | Creation of defects is not supported for category '&1' |
| 222 | Update of defects is not supported for category '&1' |
| 223 | Defect category must not be changed for defect |
| 224 | Defect created |
| 225 | Multiple requests with identical keys are not allowed |
| 226 | &1, &2 has no follow-up action assigned |
| 227 | &1 (#&2) |
| 228 | Affected object (#&1) added |
| 229 | &1 (&2) |
| 230 | Notification with immediate task(s) will not be deleted |
| 231 | Notification with immediate task(s) will be deleted |
| 232 | Specify code group and code |
| 240 | Cannot remove affected object &1: Defect &2 in final status |
| 241 | Cannot remove affected object &1 of defect &2: Quality task(s) assigned |
| 242 | Object removed |
| 243 | &1 objects removed |
| 244 | Affected object with material &1 already exists |
| 245 | Affected object with material &1 and batch &2 already exists |
| 246 | Affected object with material &1 and no batch already exists |
| 247 | Follow-up action for aff. obj. &1 not possible due to latest EWM posting |
| 248 | Cannot add affected object to defect with ID &1 |
| 249 | Cannot add long text to defect with ID &1 |
| 250 | Cannot change status to '&2': Warehouse stock is assigned to defect &1 |
| 251 | Cannot add long text without text ID |
| 252 | Text ID &1 is not defined for application object &2 |
| 253 | The text ID '&1' can only be used once per defect |
| 260 | Custom defect category ID must start with a letter from A to K or Z |
| 261 | You cannot delete defect category &1 because it may still be in use |
| 262 | Data was not saved |
| 300 | &1 |
| 301 | Enter a valid value |
| 302 | Error raised in implementation of BAdI &1 |
| 321 | Cost center &1 is invalid |
| 800 | Internal error- inconsistency between fields & <> & |
| 870 | Notification & : table 'QMIH' could not be updated |
| 871 | No equipment could be found for serial no. & and material & |