QV - QM usage decisions
The following messages are stored in message class QV: QM usage decisions.
It is part of development package QV in software component QM-IM-UD. This development package consists of objects that can be grouped under "QM usage decision".
It is part of development package QV in software component QM-IM-UD. This development package consists of objects that can be grouped under "QM usage decision".
Message Nr ▲ | Message Text |
|---|---|
| 001 | *-------------------- Usage Decision Messages --------------------------* |
| 002 | No jobs for task & available |
| 003 | Batch is identical to batch from inspection lot |
| 004 | Usage decision data is outdated. (Lot &) |
| 005 | You cannot make a usage decision for this inspection lot at the moment. |
| 006 | First article inspection for material &1, supplier &2 not yet valuated |
| 010 | The client-specific basic options need to be maintained for QM |
| 011 | The basic settings need to be maintained for QM in plant & |
| 012 | Error in status management: & |
| 013 | Missing object number: problem for status updating |
| 014 | Inspection lot was not cancelled |
| 015 | No stock proposal available |
| 016 | & short-term characteristics are still outstanding |
| 017 | & long-term characteristics are still outstanding |
| 018 | Serial number management not supported |
| 019 | Call up the 'Change with history' transaction |
| 020 | Create batch & first |
| 021 | Error & has occurred sending a mail (-> long text) |
| 022 | Follow-up actions are not supported for the required level |
| 023 | Use the function 'Orders for production lots' |
| 024 | Batch & & & could not be saved |
| 025 | Assigned order & is neither completed nor confirmed |
| 026 | The run schedule header has not yet reached the end of its runtime |
| 027 | Select a usage decision code (cancellation not allowed) |
| 028 | Defective quantity greater than inspected quantity. Correct your entry. |
| 029 | Inspected quantity greater than actual lot quantity. Check your entry. |
| 030 | You have to enter a batch for material & |
| 031 | Data transfer was canceled |
| 032 | Confirm the new batch status |
| 033 | Batch & has "unrestricted use" status |
| 034 | Batch & has "blocked" status |
| 035 | Batch & is being created with "restricted" status |
| 036 | Purchase order & & cannot be used |
| 037 | There are no results available for the characteristic you selected |
| 038 | The usage decision was reset |
| 039 | This inventory posting is not supported for the material |
| 040 | Storage location change not supported for this material |
| 041 | Changes were reset |
| 042 | Error in the quantity fields for the insp. lots |
| 043 | Batch assignment is required |
| 044 | Assignment of a batch is required |
| 045 | You cannot make the UD because of & non-valuated & |
| 046 | The UD valuation and the batch status deviate from one another |
| 047 | Change batch status to -unrestricted- based on the usage decision |
| 048 | Change batch status to -restricted- based on the usage decision |
| 049 | No electronic signatures were found for the inspection lot |
| 050 | Usage decision for inspection lot & was successfully made |
| 051 | Customer enhancement QEVA0006 prevents access to inspection lot & |
| 052 | Making the usage decision for inspection lot & requires digital signature |
| 053 | Making the UD for insp. lot & requires manual serial number assignment |
| 054 | Error during quantity posting for inspection lot &, manual proc. required |
| 055 | Batch status cannot be changed for inspection lot & |
| 056 | Data for return delivery was canceled |
| 057 | The validity period end date for prod. version &1 has not been reached |
| 058 | An error occured. Please make the usage decision manually. |
| 059 | Usage decisions made successfully -> See details |
| 060 | No UD-relevant inspection lots found |
| 061 | No entry for plant &1 and inspection type &2 in table TQSS1_AVE |
| 062 | There are still required characteristics open for inspection lot &1 |
| 063 | Inspection lot &1: Origin &2 not relevant for usage decision |
| 064 | Inspection lot &1: Automatic usage decision not planned |
| 065 | Inspection lot &1: Usage decision was already made |
| 066 | Inspection lot &1: Usage decision cannot be made |
| 067 | Inspection lot &1: UD not possible as open required characteristics exist |
| 068 | Inspection lot &1: UD not possible as open long-term chars. exist |
| 069 | Inspection lot &1: UD not possible as non-valuated insp. points exist |
| 070 | Inspection lot &1: UD not possible owing to rejected inspection char. |
| 071 | Inspection lot &1: Usage decision was not made (return code &2) |
| 072 | Inspection type &1 for plant &2 was already entered (check the entry) |
| 073 | Inspection type is not specified |
| 074 | Selected set is not specified |
| 075 | Plant is not specified |
| 076 | Code group is not specified |
| 077 | Code is not specified |
| 078 | Inspection lot &1: Undefined error in usage decision (return code &2) |
| 079 | Inspection lot &1 could not be locked |
| 080 | Inspection lot &1: No authorization for usage decision |
| 081 | No entry for plant &1 in table TQSS1 |
| 082 | Usage decision with follow-up action &2 not supported with this app. |
| 100 | Usage decision data for inspection lot cannot be displayed |
| 101 | Correcting characteristic counters |
| 102 | The usage decision for inspection lot & has not been made yet |
| 103 | Basic settings for the transaction need to be maintained in Customizing |
| 104 | No log is available |
| 105 | You must enter a material for the origin specified |
| 106 | Specify an inspection lot number or use the selection function |
| 107 | Enter both a quality score procedure as well as a module |
| 108 | The quality score procedure you entered is already maintained |
| 109 | The function module has not been created yet |
| 110 | Object type not permitted for follow-up action with function modules |
| 111 | Enter the stock transfer material for the transfer posting |
| 112 | First maintain the plant segment for material & & |
| 113 | Material & for transfer posting is copied from transfer posting batch |
| 114 | Stock transfer to EWM-managed storage location is not possible |
| 115 | Plant & has not been assigned to a controlling area |
| 116 | Usage decision for lot & & is saved |
| 117 | Stock posting for the inspection lot is not finished |
| 118 | The sum of the quantities that still must be posted is & |
| 119 | Maintain the cost center & and controlling area & completely |
| 120 | First create the cost center & and the controlling area & |
| 121 | Selected set code &2 does not exist, or data entered is incomplete |
| 122 | Use the function "Usage decision selection" |
| 123 | You do not have the authorization for usage decision & & & & |
| 124 | Short-term inspections are still outstanding |
| 125 | Material & is marked for deletion |
| 126 | Inspections are still outstanding |
| 127 | The next inspection for a usage decision is & |
| 128 | Internal error - Authorization for usage decision & & & & |
| 129 | Internal error - Authorization for stock postings |
| 130 | No usage decision was selected |
| 131 | Batch & & created |
| 132 | You do not have authorization for inspection type & |
| 133 | All processed characteristics are displayed (characteristic filter &) |
| 134 | Characteristics were selected according to characteristic filter & |
| 135 | You are not authorized to close inspections with open required characs. |
| 136 | Internal error during authorization check |
| 137 | Inspection closure not meaningful due to delivery certificate status |
| 138 | Goods have not been delivered yet; UD prevents delivery note changes |
| 139 | Inspection type & is not supported |
| 140 | Inspection lot origin & needs to be maintained |
| 141 | Inspection lot origin & is not defined |
| 142 | Select the function "Usage decision selection" |
| 143 | Posting >> & << was copied |
| 144 | No stock proposal available |
| 145 | No changes were carried out |
| 146 | Rejected partial lots exist; delivery is not possible |
| 147 | The current status of partial lot &1 does not allow the desired activity |
| 148 | Sample and reserve quantity exceeds the MM sample stock |
| 149 | Position the cursor on a characteristic |
| 150 | Follow-up action &1 is executed by BAdI FOA_EXECUTION_FOR_TASK |
| 151 | Logistical follow-up action was not specified for all partial lots |
| 152 | Implementation &1 of BAdI &2 has no filter value |
| 161 | No inspection lot was selected |
| 164 | Inspection lot & was not created yet |
| 179 | Internal error in form &- incorrect transmission data |
| 180 | Maintain inspection lot status (requirements) for & & |
| 181 | Access to inspection lot & is not allowed |
| 182 | Maintain inspection lot status (setting status) for & & |
| 183 | Use existing batch; batch &1 does not exist for material &2 |
| 184 | Batch skipped; no batch is required for material &1 |
| 200 | Error during stock postings: see log |
| 201 | Internal error: Table TQ07M is not maintained for field & |
| 202 | Maintain quality score procedure & |
| 203 | Error during quality score calculation (-> PF1) |
| 204 | No characteristic results are available for inspection lot & |
| 205 | Share of scrap has changed; Recalculate the quality score, if necessary |
| 206 | Follow-up action & cannot be used |
| 207 | Choose a higher quality score: Lower limit: & |
| 208 | Choose a lower quality score: Upper limit: & |
| 209 | Make a usage decision before you enter the quality score |
| 210 | Internal error: ASSIGN field & contains errors with return code & |
| 211 | Follow-up action & not allowed for usage & |
| 212 | Posting to sample allowed only up to a lot size of & |
| 213 | Internal error - entry & missing from table IMSEG |
| 214 | Inspection is still active. Remaining sample quantity is equal to &1 &2 |
| 215 | Internal error - remaining quantity & to be posted was corrected to 0 |
| 216 | No operations could be found |
| 217 | There are no characteristics for this inspection lot |
| 218 | Material & not maintained for plant & |
| 219 | Material & does not exist (check your entry) |
| 220 | No material documents available |
| 221 | Status change in Q-info record was carried out |
| 222 | Status in Q-info record is not changed |
| 223 | Confirmation number missing. Data cannot be displayed |
| 224 | Operation & not available for this lot |
| 225 | Enter a reason for the return delivery |
| 226 | A minimum of one defect item must be selected for this function |
| 227 | Internal error: Entry parameter QSS1_PARTIAL_LOT_FEATURE_SHOW initial |
| 228 | Selected set &1 copied from inspection type &3 and/or plant &2 derived |
| 250 | Number of valid partial samples is too large and is displayed as 9999 |
| 300 | Enter a movement type |
| 496 | Material & & is not inspection-relevant (QMAT) |
| 507 | Log 'Recurring inspection' & &, & |
| 508 | No entries found |
| 509 | No batches have been found for processing |
| 510 | Recurring inspection required |
| 511 | Date for recurring inspection reached |
| 512 | Batch expiration date reached |
| 513 | Inspection lot creation was not possible |
| 514 | Inspection lot & could not be blocked. Quantity posting not possible. |
| 516 | Transfer posting doc. item & |
| 517 | Trans. posting doc & created |
| 518 | Inspection lot & created |
| 519 | Inspection lot & changed |
| 520 | Batch status changed to 'Restricted' |
| 521 | Batch status already changed (see above) |
| 522 | Inspection lot & incomplete |
| 523 | Outstanding inspection lot & to & & & exists |
| 525 | Complete the automatic usage decision settings for results recording |
| 526 | Complete the automatic usage decision settings for skip lots |
| 527 | Plant &1 was set |
| 528 | No automatic UD made: inspection lot &1 is not a skip lot |
| 529 | No automatic UD made: waiting time since skip lot creation not passed |
| 530 | Selected set &1 not valid for usage decision plant &2 |
| 531 | EWM Inspection needs inspection origin '17'. But inspection lot has &1 |
| 532 | You are not authorized to change the QM view in the material master |
| 600 | You are not authorized to use transaction &1 |
| 801 | No change documents exist |
| 802 | No entries found for &1 &2 |
| 803 | Please use the new digital signature method to make the usage decision. |
| 804 | Quick usage decision not possible. &1 requires a digital signature. |