R7 - BW: Data basis
The following messages are stored in message class R7: BW: Data basis.
It is part of development package RSD in software component BW-WHM-MTD. This development package consists of objects that can be grouped under "BW: Data Basis InfoObjects and Core Services".
It is part of development package RSD in software component BW-WHM-MTD. This development package consists of objects that can be grouped under "BW: Data Basis InfoObjects and Core Services".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1 &2 &3 &4 |
| 001 | The length of generation namespace &1 must not be longer than &2 |
| 002 | RFC error: &1 |
| 003 | Invalid BW namespace definition -> See long text |
| 004 | Catalog must be of type 'CHA' (characteristic) or 'KYF' (key figure) |
| 005 | InfoProvider &1 is inconsistent; reactivate |
| 006 | InfoObject &1 is inconsistent; repair |
| 007 | Cannot repair InfoObject &1 (SIDs already exist) |
| 008 | InfoObject &1 not converted correctly |
| 009 | Conversion block (master data) on characteristic &1 was deleted manually |
| 010 | Object namespace & is already used as a generation namespace |
| 011 | Name &1 is not in the namespace for BW meta objects |
| 012 | Namespace funtion group RSDN is not initialized |
| 013 | Error while linking together fields &1 &2 &3 &4 (too long) |
| 014 | &1 is not a name for a navigation attribute (string '__' is missing) |
| 015 | InfoObject &1: The output length has been set to &2 |
| 016 | Name &1 in the partner namespace is invalid; correct form: /ABC/DEF |
| 017 | Namespace '&1' is not a valid BW namespace |
| 018 | Object name after prefix must not be empty |
| 019 | Name &1 is not in the namespace for generated BW meta objects |
| 020 | Char.&1 has vers.&2 hierarchy; hierarchies must remain version-dependent |
| 021 | Table ID &1 is not permitted for table types |
| 022 | Name &1 is not a valid BW generation namespace |
| 023 | Name &1 after prefix &2 has to have spaces between &3 and &4 |
| 024 | Object name &1 after the prefix has to start with ABC...XYZ |
| 025 | Object &1 is not a C-ODS Cube |
| 026 | &1: Number range object &2 does not exist |
| 027 | Error when deleting the export DataSource &1 from characteristic &2 |
| 028 | Export DataSource &1 of characteristic &2 was deleted |
| 029 | Characteristic &1 cannot be a master data InfoSource |
| 030 | InfoObject &1: &2 &3 is not active. Activate the InfoObject. |
| 031 | Characteristic &1 is a geocharacteristic. Coordinate attribute added. |
| 032 | Characteristic &1. Enter GIS attribute. |
| 033 | Char. &1 is of geographical type &2: Changed to 'with master table'. |
| 034 | Geo-characteristic &1 is not activated or has the wrong geographical type |
| 035 | Characteristic &1: only &2 InfoObjects are allowed in the compounding |
| 036 | Error in renaming table &1 to &2 in the database |
| 037 | Error (&1) in enforced activating of table &2 |
| 038 | Table &1: error creating index &2 (&3) |
| 039 | Characteristic &1: Navigation attribute &2 deleted (possibly converted) |
| 040 | Field name &1 is longer than &2 (&3 cannot be used for authorizations) |
| 041 | Characteristic &1 has conversion routine; extension not allowed |
| 042 | Characteristic &1: Extension can be problematic |
| 043 | Key fig. &1, version &2: Compounding type set from key figure &3 to &4 |
| 044 | InfoObject &1 is inconsistent (it is new and still flagged as active) |
| 045 | Characteristic &1: The &2 is new and must be filled with data |
| 046 | Characteristic &1: The coordinate attributes were deleted |
| 047 | Characteristic &1: Time-dependent &2 '&3' not buffered |
| 048 | &1 can only be manually activated in client &2 |
| 049 | Characteristic &1 is a BOR object: Attribute 0SOURSYSTEM added |
| 050 | Generation namespace & is already used as an object namespace |
| 051 | Incoming / outgoing / or changed stock of key figure &1 not found |
| 052 | InfoObject &1 (version &2) does not have any attributes |
| 053 | InfoObject &1 does not exist in InfoCube &2 (version &3) |
| 054 | Domain &1 or fixed value '&2' of this domain not found |
| 055 | Invalid dictionary version '&1'; only 'M', 'A' or 'N' permitted |
| 056 | Data element &1 is not available in version &2 |
| 057 | InfoObject &1 (version &2) is not compounded |
| 058 | Invalid entry &1 &2 &3 &4 |
| 059 | InfoObject &1 is new - please activate first |
| 060 | InfoObject &1 is not active |
| 061 | InfoObject &1 deactivated |
| 062 | Could not find an InfoProvider for the specified selection conditions |
| 063 | Namespace '&1' must be set to 'changeable' (transaction SE06) |
| 064 | Characteristic &1: Reference characteristic has been changed to &2 |
| 065 | Characteristic &2: Cannot edit attribute &1 in master data maintenance |
| 066 | Characteristic &2:Dependent characteristic &1 missing from the attributes |
| 067 | Characteristic &1: Master data has to be activated before conversion |
| 068 | Error creating the export DataSource(s) of characteristic &1 |
| 069 | Export DataSource(s) of characteristic &1 created |
| 070 | A BW application must be chosen |
| 071 | Characteristic &1 has no master data but is an export DataSource |
| 072 | Characteristic &1: Assigned InfoArea &2 does not exist->NODESNOTCONNECTED |
| 073 | Characteristic &1: Error creating the organization criteria &2 |
| 074 | Characteristic &1: Error deleting the organization criterium &2 |
| 075 | Characteristic &1: Organization criterium &2 was deleted |
| 076 | Characteristic &1: Organization criterium &2 was created |
| 077 | Hierarchy characteristic &1 of characteristic &2 is not active |
| 078 | Characteristic &1: Navigation attribute &2 does not exist for char. &3 |
| 079 | Characteristic &1 is not an InfoProvider; InfoArea / nav. attr. deleted |
| 080 | Source system &2 already marked as default for ID &1 |
| 081 | Source system ID &1 used in source system &2 |
| 082 | Please only use characters from &1 |
| 083 | Please enter a text for logical system &1 |
| 084 | Source system ID &1 not found |
| 085 | Source system ID &1 of logical system &2 was deleted |
| 086 | Error when deleting source system ID &1 of logical system &2 |
| 087 | No source system ID exists for source system (logical system) &1 |
| 088 | Source system &1 already exists in the list |
| 089 | Empty source system IDs are not saved |
| 090 | Request &1 does not contain any InfoObjects |
| 091 | InfoObject &1 was inserted into object list of request &2 |
| 092 | Request &1 is complete with respect to InfoObjects |
| 093 | InfoObject &1 already saved in task &2 |
| 094 | You do not have authorization to display source systems |
| 095 | You do not have authorization to maintain source systems |
| 096 | InfoObject &1: DDIC Object &2 &3 is unnecessary and will be deleted |
| 097 | Characteristic &1 has no more master data. The attributes are deleted. |
| 098 | InfoObject &1 has no master data tables or texts -> F4 Help via dimension |
| 099 | Error when saving InfoObjects |
| 100 | ----------- Generation of InfoObjects: Dialog -------------------------- |
| 101 | The attributes from characteristic &1 also used for characteristic &2 |
| 102 | Editing type &1 is not allowed |
| 103 | You do not have authorization to display the selected InfoObjects |
| 104 | Error while reading InfoObjects from the database |
| 105 | The object name is not allowed to be empty |
| 106 | Enter valid characteristic ( &1 not available) |
| 107 | Enter valid key figure (&1 not available) |
| 108 | Operation cancelled at user's request |
| 109 | Field &1 is reserved (please select other names) |
| 110 | Object name &1 must be alphanumeric |
| 111 | Object name &1 must be exactly &2 characters long |
| 112 | Object name &1 must be between &2 and &3 characters long |
| 113 | Only InfoObjects from system type &1 can be edited |
| 114 | InfoObject &1 has already been defined as &2 (please rename the Object) |
| 115 | Onbject name & used twice (please rename) |
| 116 | InfoObject &1 already exists as &2 (please rename) |
| 117 | Please either choose a reference characteristic or key figure or template |
| 118 | InfoCube &1 is not available in version &2 |
| 119 | Please enter an InfoCube or DataStore Object |
| 120 | No entries selected -> Operation not executed |
| 121 | Select one or more rows |
| 122 | The constant is not numerical |
| 123 | InfoObject &1: Enter type and length |
| 124 | InfoObject &1: Enter valid data type ( CHAR,NUMC,DATS,TIMS) |
| 125 | InfoObject &1 may be a maximum of &2 digits |
| 126 | Enter an InfoObject of type &1 |
| 127 | Note: A constant is assigned to characteristic &1 |
| 128 | You can only maintain display attributes with referenced chararact. &2 |
| 129 | No suitable standard domain found (type &1, length &2) |
| 130 | Enter description |
| 131 | Default value &1 set for the reference field |
| 132 | Reference characteristic is deleted (both aggregations agree) |
| 133 | InfoObject &1 is not available in InfoProvider &2 |
| 134 | InfoObject &1 has the same description as InfoObject &2 |
| 135 | Navigational attribute &1 has the same description as characteristic &3 |
| 136 | Navigational attribute &1 has same description as nav. attribute &3 |
| 137 | Activation was terminated |
| 138 | Characteristic &1: Compound is incompletely defined |
| 139 | Characteristic &1 (in compound from char. &2) is not available |
| 140 | Compound of characteristic & produces recursion |
| 141 | Characteristic &1 only allowed to appear once in the compound |
| 142 | Current InfoObjects were deleted or removed |
| 143 | Compound with char. &1 produces a total length of &2 (maximum is &3) |
| 144 | &1 o.k. |
| 145 | InfoObject &1 is not yet in the InfoObject catalog |
| 146 | Select a valid row |
| 147 | InfoObject &1 is deliverd by SAP as &2 (please rename) |
| 148 | Characteristic &1 requires &2 (is transferred to the compund) |
| 149 | Characteristic &1 not allowed to occur in its own compound |
| 150 | Characteristic &1 not allowed in the compund of &2 (system type) |
| 151 | Last object reached |
| 152 | First object reached |
| 153 | Place the cursor on a valid field |
| 154 | InfoObject &1 still used in &2 &3 |
| 155 | InfoObject &1 used in compounding of or as in/out flow of &2 |
| 156 | InfoObject &1 used as attribute with characteristic &2 |
| 157 | Data element &1 still used in table/view &2 |
| 158 | Name of the characteristic itself (&1) is reserved |
| 159 | Error/warning in dict. activator, detailed log --> Detail |
| 160 | InfoObject &1 deleted |
| 161 | Specify a name |
| 162 | InfoObject &1 used as navigation attribute with characteristic &2 |
| 163 | First change attribute &1 with characteristic &2 to navigation attribute |
| 164 | The name &1 is already used for a characteristic |
| 165 | Attribute &1 is used twice in characteristic &2 |
| 166 | Object type &1 is not allowed |
| 167 | Object selection &1 is not allowed |
| 168 | InfoObject(s) saved |
| 169 | All InfoObject(s) activated |
| 170 | Navigation attribute &1 is still used in InfoCube &2 |
| 171 | You have no authorization for displaying this log |
| 172 | Attribute &1 was made into navigation attribute |
| 173 | Enter characteristic &1 or one of the referencing characteristics |
| 174 | InfoObject &1 is referenced by InfoObject &2 |
| 175 | Attribute &1 already exists for characteristic &2 |
| 176 | Characteristic &1 is already contained in the compound characteristic |
| 177 | Attribute &1 produces recursion for characteristic &2 |
| 178 | InfoObject &1 cannot be edited (system type &2) |
| 179 | InfoObject &1 must also be transferred as an attribute of char. &3 |
| 180 | Navigation attribute &1 is still used in InfoCube &2 |
| 181 | Attribute &1 is still used in characteristic &2 |
| 182 | The clipboard is empty |
| 183 | The attributes were transferred to the clipboard |
| 184 | Attribute &1 is already defined and will not be transferred |
| 185 | InfoObject &1 is aggregation ref. characteristic of key figure &2 |
| 186 | Enter either unit InfoObject or fixed currency/unit |
| 187 | First character must be a 0 |
| 188 | First character of the field name &1 must be a letter or '/' |
| 189 | Characteristic &1 does not have any master data (or any texts) |
| 190 | There are no tables to be converted |
| 191 | The master data table of char. &1 is not generated, operation terminated |
| 192 | &1 &2 does not ewxist and will be created |
| 193 | Characteristic &1, attribute &2: The order must be numeric in the F4 help |
| 194 | Characteristic &1: Reversed sign for hierarchies no longer activated |
| 195 | Error &2 with function module &1 (&3) |
| 196 | Database table &1 deleted and recreated |
| 197 | Master data tables must be converted - activate characteristics |
| 198 | All saved InfoObjects already active (or locked) |
| 199 | Text from attribute &1 occurs twice |
| 200 | Please put the cursor on an attribute that is a characteristic |
| 201 | InfoObject &1: Unit InfoOject &2 is not (actively) available |
| 202 | Character string &1 is not allowed in the name |
| 203 | Character string &1 is not allowed at the end of name |
| 204 | Character string &1 is is not allowed at start of field name &2 |
| 205 | Name must start with a character from '&1' |
| 206 | Unit InfoObject &1 has incorrect type &2 |
| 207 | All InfoObjects deleted, error whilst deleting environment: See log |
| 208 | Transfer routine can only be maintained with the referencing char. &2 |
| 209 | All InfoObjects deleted without errors |
| 210 | Not all InfoObjects could be deleted: See log. |
| 211 | The dimension must consist of at least one InfoObject |
| 212 | InfoCube does not contain any key figures |
| 213 | InfoObject &1 is not allowed in dimension (incorrect type) |
| 214 | InfoObject catalog &1 is not available in version &2 |
| 215 | InfoObject catalog &1 is of type (&2) |
| 216 | The selected InfoObjects are either locked or of the wrong system type |
| 217 | Be careful! You are editing objects delivered by SAP. |
| 218 | InfoObject &1 is of incorrect system type &2 |
| 219 | Save InfoObjects first |
| 220 | Characteristic &1 is not actively available |
| 221 | Name must begin with a '&1' |
| 222 | Field name &1 must have between &2 and &3 digits |
| 223 | Switched to display mode |
| 224 | Switched to editing mode |
| 225 | All InfoObjects already saved (or locked) |
| 226 | You do not have authorization to change the selected InfoObjects |
| 227 | You do not have authorization to delete the selected InfoObjects |
| 228 | Enter a length between 1 and &1 |
| 229 | No (further) objects found |
| 230 | Error/warning in Dictionary deleter; detailed log --> detail |
| 231 | Please enter a valid unit (&1 not available) |
| 232 | Characteristic &1 already present and will not be transferred |
| 233 | InfoObject &1 could not be saved in one request |
| 234 | Attribute &1 was made into a pure display attribute |
| 235 | No tables were generated for characteristic &1 |
| 236 | Schedule the table to be converted as background processing (->long text) |
| 237 | InfoSource &1 already exists. Rename it. |
| 238 | Characteristic &1: Hierarchy structure has become time dependant |
| 239 | Characteristic &1 bearing hierarchies: Max. length with compounding: &2 |
| 240 | Characteristic &1 must equally be a navigation attribute of char. &3 |
| 241 | Characteristic &1: Small case letters were set to 'not allowed' |
| 242 | Char. &1, version &2: set to 'with master data table'. |
| 243 | Characteristic &1, version &2: Attributes deleted (no master data table) |
| 244 | Object version &1 is not allowed |
| 245 | InfoObject &1 does not exist in version &2 |
| 246 | Warning!! Deleting the block can lead to inconsistencies!! |
| 247 | Characteristic &1, version &2: Nav. attrib. &3 deleted (no attribute) |
| 248 | InfoObject &1 is a protected system field |
| 249 | InfoObject &1 is locked, protected or cannot be edited |
| 250 | InfoObject &1 was reset to the active version |
| 251 | A query element with technical name &1 already exists |
| 252 | InfoObject &1 is still being used in DataStore object &2 |
| 253 | The transfer routine for characteristic &1 is o.k. |
| 254 | No transfer routines have been maintained yet for characteristic &1 |
| 255 | The function is not permitted |
| 256 | InfoObject &1 is used in transfer rules (&3) of characteristic &2 |
| 257 | Error when reading InfoObject &1 from source system &2 |
| 258 | Error in the RFC communication to source system &1 |
| 259 | InfoObject &1 was updated from the source system &2 |
| 260 | InfoObject name &1 is reserved (please select another) |
| 261 | Enter a valid time characteristic (&1 not available) |
| 262 | InfoObject &1 is locked and cannot be edited |
| 263 | System type &1 is not permitted |
| 264 | The DataSources of char. &1 do not have attributes (or do not exist) |
| 265 | No attributes deleted |
| 266 | No characteristics deleted from the compounding |
| 267 | The characteristics were transferred to the clipboard |
| 268 | InfoObject &1 already exists and was transferred as an attribute |
| 269 | Enter the field name in the text view |
| 270 | InfoObject &1 is of type &2 |
| 271 | The transfer routine of active version of InfoObject &1 was transferred |
| 272 | The transfer routine of InfoObject &1 is locked by the CTO |
| 273 | Transfer routine of InfoObject &1 could not be saved in the order |
| 274 | Transfer routine of InfoObject &1 succesfully saved |
| 275 | Error while saving transfer routine of InfoObject &1 |
| 276 | InfoObject &1 already exists |
| 277 | Object status of the selected InfoObjects was set to inactive |
| 278 | The (default) values for the aggregation have been reset |
| 279 | InfoObject &1 is locked by the Change and Transport Organizer |
| 280 | You do not have authorization to read Program Builder |
| 281 | You must not delete any rows from the pairing of InfoObject &1 |
| 282 | InfoObject &1 is already active |
| 283 | Foreign key of the InfoObject &1 tables successfully deleted |
| 284 | InfoObject &1 is referenced - cannot change data type to DATS or TIMS |
| 285 | Characteristic &1: Attribute &3 compounded to &2 has a diff. time-dpdncy |
| 286 | Error in activating the InfoObjects |
| 287 | InfoObject &1 is copied from the revised version |
| 288 | The properties of InfoObject &1 were copied |
| 289 | Caution ! The saved version of InfoObject &1 is being compared |
| 290 | InfoObject &1: Transfer routine copied from version &2 into version &3 |
| 291 | Warning! The saved version of InfoObject &1 is being merged |
| 292 | InfoObject &1 still being used in DataSore object &2 (contains data) |
| 293 | Characteristic &1 has no navigation attributes - action terminated |
| 294 | Attribute SID table for characteristic &1 successfully filled |
| 295 | Error when filling attribute SID table for characteristic &1 |
| 296 | Characteristic &1: Cannot add attribute &2 directly into compounding |
| 297 | InfoObject &1 has dependent InfoObject &3 for invalid component &4 |
| 298 | Transfer rule for characteristic &1 already exists |
| 299 | Characteristic &1 does not bear hierarchies (in the active version) |
| 300 | ----------- Generation of InfoObjects: Save/Activate ---------------- |
| 301 | Foreign key from master data table &1 deleted |
| 302 | &1 &2 is no longer active |
| 303 | Characteristic &1: Key figure &2 and unit &3 - inconsist. time-dependency |
| 304 | Attributes for characteristic &1 could not be updated |
| 305 | Navigation attributes for characteristic &1 could not be updated |
| 306 | Error when writing object &1 &2 in the ObjectCatalog (TADIR) |
| 307 | View &1 not saved because of errors |
| 308 | Note &1 &2 not saved because of errors |
| 309 | &1 &2 saved |
| 310 | Error while saving domain of characteristic & |
| 311 | Domain & saved |
| 312 | Error while saving domain & |
| 313 | Characteristic &1 has been used twice. Rename the characteristic. |
| 314 | Domain &1 is not available in versio &2 |
| 315 | Error when saving data element of InfoObject &1 |
| 316 | Characteristic &1: new SIDs for attributes successfully determined |
| 317 | Data element &1 saved |
| 318 | Error when saving data element &1 |
| 319 | MD table &1 for basic characteristic &2 already exists (no new def.) |
| 320 | Error whilst reading model table, - view, or table type &1 |
| 321 | InfoObject &1 (in compound of characteristic &2) not (act.) available |
| 322 | Attribute &1 from characteristic &2 not (actively) available |
| 323 | Master data table (&1) &2 saved |
| 324 | Table (type/view) &1 not saved due to errors |
| 325 | Text table &1 for basic characteristic &2 already exists (no new def.) |
| 326 | Check of InfoObject &1: &2 |
| 327 | &1 &2 not saved because of errors |
| 328 | Error while reading data element &1 |
| 329 | Note: Key figure &1 not saved due to errors |
| 330 | &1 &2 save: |
| 331 | Key figure &1 saved |
| 332 | Error while updating basic characteristic &1 in the database |
| 333 | Error while updating characteristic &1 in the database |
| 334 | Error while inserting basic characteristic &1 in the database |
| 335 | Error while inserting &1 &2 in the database |
| 336 | Error while inserting characteristic &1 into compound of &2 |
| 337 | Error while updating key figure &1 in the database |
| 338 | Error while inserting key figure &1 in the database |
| 339 | Delete &1 &2: |
| 340 | Domain &1 deleted |
| 341 | Data element &1 deleted |
| 342 | Table &1 deleted |
| 343 | Error when deleting object &1 &2 from TADIR |
| 344 | Char. &1 may not appear in compounding and attributes simultaneously |
| 345 | Some InfoObjects cannot be edited |
| 346 | InfoObject &1 is blocked by user &2 |
| 347 | Characteristic &1 is not allowed to reference itself |
| 348 | No current log available (yet) |
| 349 | InfoSource &1 is temporarily locked by user &2 |
| 350 | Characteristic &1, version &2: Routine &3 not available (will be removed) |
| 351 | Characteristic &1: Error when setting the hier. structure to time-depndnt |
| 352 | &1 &2 could not be activated |
| 353 | Note !!! &1 &2 not saved due to errors |
| 354 | &1 &2 activated |
| 355 | Object &1 &2 written to the ObjectCatalog (TADIR) |
| 356 | Function is not allowed for InfoObjects of type &1 |
| 357 | &1 &2 deleted |
| 358 | Error when deleting object &1 &2 |
| 359 | &1 &2 still used in InfoCube &2 |
| 360 | &1 &2 does not exist |
| 361 | InfoObject &1 appears twice in the InfoProvider |
| 362 | InfoCube contains more than &1 dimensions |
| 363 | InfoCube contains more than one dimension of type &1 |
| 364 | InfoCube does not contain any dimensions |
| 365 | Error whilst modifying the InfoCube - InfoObject assignment |
| 366 | Error whilst modifying the InfoCube - dimension assignment |
| 367 | Error whilst modifying the InfoCube &1 on the database |
| 368 | Unit dimension required for key figure &1 |
| 369 | Key figure &1: Unit &2 is not in the unit dimension &3 |
| 370 | Table &1: Index &2 for field &3 saved |
| 371 | Table &1: Index &2 not saved due to errors (field &3) |
| 372 | Error when generating master data routines |
| 373 | Characteristic &1: Error when generating master data routines |
| 374 | Error when deleting master data routines from characteristic &1 |
| 375 | Key figure &1 does not posses currency/unit |
| 376 | Master data routines generated for characteristic &1 |
| 377 | Characteristic &1: Name of reference characteristic &2 differs |
| 378 | Characteristic &1: Tables not active; master data routines not generated |
| 379 | InfoObject &1: &2 &3 collected for activation |
| 380 | Attribute &1: &2 &3 collected for activation |
| 381 | Error when deleting update rules of InfoCube &1 |
| 382 | All update rules of InfoCube &1 deleted |
| 383 | Dimension &1 for InfoObject &2 not found |
| 384 | Error when dragging master data routines ID to characteristic &1 |
| 385 | Data element &1 is not generated |
| 386 | Additional texts for data element &1 saved |
| 387 | Error when saving additonal texts of data element &1 |
| 388 | Dimension &1 already used in InfoCube &2 |
| 389 | InfoCube &1: &2 &3 collected for activation |
| 390 | Master data routines from characteristic &1 deleted |
| 391 | Saving was canceled |
| 392 | Table &1: Index &2 deleted |
| 393 | Table &1: Error when deleting from index &2 |
| 394 | InfoObject &1: Enter the description |
| 395 | InfoObject &1 is incorrect and will not be activated |
| 396 | Characteristic &1: Referenced characteristic &2 not (actively) available |
| 397 | Objects depending on InfoObject &1 being checked |
| 398 | Units InfoObject &1 used with key figure &2 verwendet |
| 399 | External check of InfoObject &1: |
| 400 | Database table &1 was deleted |
| 401 | Database table &1 could not be deleted |
| 402 | Database table &1 was created anew |
| 403 | Database table &1 could not be created again |
| 404 | Key figure &1: Aggregation reference char.&1 is not (actively) available |
| 405 | Inconsistent compounding with characteristic &1 and referenced char. &2 |
| 406 | InfoObject &1 saved |
| 407 | InfoObject &1 is not activated (DDIC Obj. could not be saved) |
| 408 | Error when writing the &1 version from InfoObject &2 |
| 409 | Error when saving InfoObject &1 |
| 410 | InfoObject &1 cannot be deleted because of references |
| 411 | InfoObject &1 will be flagged for deletion |
| 412 | InfoObject &1 is incorrect because of dependencies |
| 413 | InfoObject &1 (compounding of IO) from &2 cannot be deleted |
| 414 | InfoObject &1 from attributes of characteristic &2 cannot be deleted |
| 415 | InfoObject &1 is referenced by IO. &2 and cannot be deleted |
| 416 | Unit IO &1 is referenced by IO. &2 and cannot be deleted |
| 417 | Characteristic &1: The &2 and all data being deleted |
| 418 | &1 &2 collected for deletion |
| 419 | InfoObject &1: Error when reading the DICC objects |
| 420 | &1 &2 were not deleted |
| 421 | Object &1 &2 deleted from TADIR |
| 422 | Ref. characteristic &1 is not allowed for exception aggregation &2 |
| 423 | Key figure &1 is of invalid type &2 |
| 424 | Characteristic &1: Lower case makes selection of char. values difficult |
| 425 | Characteristic &1: More than &2 fields in table &4 (&3 fields) |
| 426 | Characteristic &1: The text table must have at least one text field |
| 427 | Navigation attribute &1 is missing in characteristic &2 |
| 428 | Characteristic &1: Enter description of navigation attribute &2 |
| 429 | Characteristic &1 from nav. attributes from char. &2 cannot be deleted |
| 430 | Characteristic &3: Attribute &1 is a true display attribute of char. &2 |
| 431 | Characteristic &1: Conversion exit &2 does not exist and will be deleted |
| 432 | Error when saving the &1 version of InfoObject &2 |
| 433 | InfoObject &1 was corrected: The &2 version will be saved again |
| 434 | Key figure &1, type '&2': invalid data type '&3' will be replaced by '&4' |
| 435 | Error when dragging the number range number to object &1 &2 |
| 436 | Number range RS_OBJNUMG is in a critical area |
| 437 | &1: Error when creating number range object &2 |
| 438 | &1: Number range object &2 was created |
| 439 | &1 &2: Number range object &3 was deleted |
| 440 | &1 &2: Error when deleting number range object &3 |
| 441 | Default currency translation/GIS attribute &2 is missing for IOBJ &1 |
| 442 | Characteristic &1: The currency/unit &2 is of incorrect type &3 |
| 443 | Following tables must be converted |
| 444 | InfoObject &1 was delivered by SAP (D (German) version exists) |
| 445 | &1 is just an attribute and is not allowed in the compounding |
| 446 | Transfer routine from characteristic &1 was activated |
| 447 | Characteristic &1: Error when activating or checking the transfer routine |
| 448 | Error when deleting the transfer routine from characteristic &1 (&2) |
| 449 | The transfer routine from characteristic &1 was deleted |
| 450 | Table type &1 saved |
| 451 | Characteristic &1: The &2 will be deleted, text table must be converted |
| 452 | Characteristic &1 just an attribute and cannot be used for authoriaztion |
| 453 | Interval &1 of number range &2 is missing --> Long text |
| 454 | Characteristic &1: Aggregates could not be used (master data maintenance) |
| 455 | Aggregate &1 deactivated (uses deleted or time-dependent attribute) |
| 456 | Error when dragging the number range number to dimension &1 |
| 457 | Error when creating the authorization field of InfoObject &1 |
| 458 | Authorization field of InfoObject &1 was successfully created |
| 459 | Characteristic &1: The text table is no longer language-dependent |
| 460 | Characteristic &1 texts are no longer time-dependent |
| 461 | Characteristic &1: The data type has changed from &2 to &3 |
| 462 | Characteristic &1: The length has changed from &2 to &3 |
| 463 | Characteristic &1: Lower case is no longer permitted |
| 464 | Char. &1: InfoObject &2 was deleted from the compounding -> long text |
| 465 | Characteristic &2 was included in the compounding for &1 (-> Long Text) |
| 466 | Char. &1: Changes to the time dependency of the hier. were incompatible |
| 467 | &1 &2 contains data: Characteristic &3 cannot be activated |
| 468 | Characteristic &1: Attribute &2 deleted (possibly converted) |
| 469 | Characteristic &1: &2 &3 contains data and must be converted |
| 470 | Characteristic &1 assigned to conversion routine 'ALPHA' |
| 471 | InfoObject &1 cannot be deleted (type &2) |
| 472 | InfoObject &1 already exists and will not be transferred from D version |
| 473 | Char. &1 is exclusively an attribute (cannot be a navigation attribute) |
| 474 | Characteristic &1: The constant was changed from &2 to &3 |
| 475 | Characteristic &1 is exclusively an attribute: Hierarchies are not poss. |
| 476 | Characteristic &1 is blocked by conversion |
| 477 | Characteristic &1: The method for SID entry has changed |
| 478 | InfoObject catalogs were reorganized (version &1) |
| 479 | Error when reorganizing the InfoObject catalog (version &1) |
| 480 | Reset incorrect objects to active version |
| 481 | Deactivation of InfoObjects that could not be activated |
| 482 | InfoObject &1 deactivated (status set to 'inactive') |
| 483 | InfoObject &1: Dependent InfoObjects being edited |
| 484 | InfoObject &1: End of the editing of dependent InfoObjects |
| 485 | Authorization field of InfoObject &1 was successfully deleted |
| 486 | Characteristic &1: GIS attribute &2 was deleted (GIS type &3) |
| 487 | Characteristic &1: GIS attribute &2 has the wrong GIS type &3 |
| 488 | InfoObject &1 deleted from InfoObject catalog &2 |
| 489 | Error when deleting InfoObject &1 from InfoObject catalog &2 |
| 490 | InfoObject &1 was inserted into InfoObject catalog &2 |
| 491 | Error when inserting InfoObject &1 into InfoObject catalog &2 |
| 492 | Cannot delete authorization field of InfoObject &1 |
| 493 | InfoObject &1 is in version A, but the object status is inactive |
| 494 | InfoObject &1 is new (there is no A version) |
| 495 | InfoObject &1 is only present in the SAP delivery version |
| 496 | InfoObject &1: Local table entry (RSDCHABASLOC) was deleted |
| 497 | InfoObject &1: Local table entry (RSDCHABASLOC) was created |
| 498 | Error when deleting hierarchies from characteristic &1 |
| 499 | All hierarchies from characteristic &1 were deleted |
| 500 | No hierarchies exist for characteristic &1, they have all been deleted! |
| 501 | Start of the after-import method &3 for object type(s) &1 (&2) |
| 502 | Char.&1 has lower-case letters -> Neither texts or master data possible |
| 503 | InfoObject &1 being used and also transferred from the SAP version |
| 504 | InfoObject &1: Error when copying the transfer routine from version &2 |
| 505 | Key figure &1 is of type &2: Standard aggregation was set to &3 |
| 506 | InfoObject &1, version &2 being deleted, (basic char. &3 not found) |
| 507 | InfoObject &1, of type &2 changed to &3, deleting old active version |
| 508 | Ref. characteristic &1 is not allowed for exception aggregation &2 |
| 509 | Characteristic &1: Attribute &2 cannot be used w. time-dependent attribte |
| 510 | The entry is missing in table &4 for InfoObject &1 type &2 version &3 |
| 511 | An active version but not a revised one exists for InfoObject &1 |
| 512 | InfoObject &1, version &2, type &3: Compounding status &4 is inconsistent |
| 513 | InfoObject &1, version &2: Attribute flag &3 is inconsistent |
| 514 | InfoOb. &1, vers. &2: Type &3: RefFlag. &4 and name basisChar. inconsstnt |
| 515 | InfoOb. &1, vers. &2: typ &3: RefFlag. &4 and exist. basisChar inconsitnt |
| 516 | InfoObject &1, version &2, type &3: Compounding status set to &4 |
| 517 | InfoObject &1, version &2: Attribute flag set to &3 |
| 518 | Table &1 is currently locked by user &2 |
| 519 | InfoObject &1 was copied from version &2 to version &3 |
| 520 | InfoObject &1, version '&2' was deleted |
| 521 | InfoObject &1, version &2: The InfoObject type was changed to &3 |
| 522 | InfoObject &1, typ &2, version &3: Entry deleted from table &4 |
| 523 | InfoObject &1: The presentation was changed to 'Key' |
| 524 | InfoObject &1 still used in InfoCube &2 |
| 525 | Aggregation of non-cumulative value key figure &1 was adjusted |
| 526 | Only time chars are allowed as reference chars for non-cumulative values |
| 527 | Key figure &1 still being used as I/O or change of &2 |
| 528 | InfoObject &1: &2 was changed from &3 to &4 |
| 529 | Non-cumulative value &1: &2 &3 is not (actively) available |
| 530 | Key figure &1: Rows were deleted from compounding (type &2) |
| 531 | Non-cumulative value &1: Aggregation reference char. &2 is not time char. |
| 532 | Non-cumulative value &1: Inflow &2 and outflow &3 are inconsistent |
| 533 | Non-cumulative value &1: Aggregation of &2 &3 must sum |
| 534 | Non-cumulative value &1: Outflow and inflow must differ |
| 535 | Non-cumulative value &1 and NC value change &2 are inconsistent |
| 536 | Non-cumulative value &1: &2 &3 must be a cumulative value |
| 537 | Compounding of characteristic &1 was changed although still being used |
| 538 | Key fig. &1, version &2 has NC value type '&3': Compding will be adjusted |
| 539 | Key fig.&1, version &2: Invalid NC value type '&3' will be reset |
| 540 | Key fig.&1, version &2 has NCum value type '&3': Compounding incomplete |
| 541 | Navigation attribute &1 for characteristic &2 not found (version &3) |
| 542 | Error while writing to database table &1 |
| 543 | Key figure &1 has obsolete type &2: Type set to &3, data type to &4 |
| 544 | Characteristic &1 has no conversion routine, ouput length set to &2 |
| 545 | Dependent InfoObject &1 was not found |
| 546 | Char. &1 is a navigation attr. of &2: Exclusively attribute not possible |
| 547 | InfoO. &1 is used in compounding of &2: Data type cannot be changed |
| 548 | Key figure &1 is used in non-cum value &2, type cannot be changed |
| 549 | InfoObject &1 is referenced by &2, therefore it cannot reference further |
| 550 | Deactivation of InfoObjects that use deleted InfoObjects |
| 551 | Charateristic &1: Navigation attribute &2 switched on (-> N.B long text) |
| 552 | Job &1 (number &2) started (&3) |
| 553 | Error when scheduling batch job &1 (number &2) (&3) |
| 554 | Navigation attribute &1 deleted from characteristic &2 |
| 555 | Navigation attr. &1 cannot be deleted - used in productive InfoCube &2 |
| 556 | Reference field &1 does not exist |
| 557 | InfoObject &1 is referenced from &2, compounding cannot be changed |
| 558 | Characteristic &1 is used in compounding of &2, but &3 is not |
| 559 | Characteristic &1 is used as &4 of &2, but characteristic &3 is not |
| 560 | Characteristic &1 is used in &4 &2, but characteristic &3 is not |
| 561 | Characteristic &1: SIF table was changed - SIF buffer being deleted |
| 562 | InfoObject &1, version &2: Attribute &3, attribute type set to &4 |
| 563 | Unit &1 is used in key figure &2, unit type cannot be changed |
| 564 | Non-cumulative value &1: &2 &3 already used in non-cumulative value &4 |
| 565 | Key fig.&1: The data type was changed from &2 to &3 |
| 566 | InfoObject &1: Hierarchy name and structure cannot be time-dependent |
| 567 | Customer Infobject &1 is not created in the content system |
| 568 | InfoObject &1 is used in InfoCubes: Not all properties are changeable |
| 569 | InfoObject &1 used in InfoCube: Exclusive of attribute not possible |
| 570 | Characteristic &1: Please delete the foreign key --> see long text |
| 571 | Key figure &1: Unit &2 is exclusively an attribute |
| 572 | Unit &1 used in key figure &2, exclusive of attribute not possible |
| 573 | Characteristic &1: Attribute &2 must not reference the char. itself |
| 574 | Characteristic &1, version &2: convers. routine set to &3 -> activate |
| 575 | Characteristic &1: Compound or reference was changed |
| 576 | InfoObject &1 being used in InfoCubes or DataStore objects --> error: |
| 577 | InfoObject &1 (or ref.) used in InfoProvider containing data-> Error: |
| 578 | InfoObject &1 being used in InfoCube &2 (contains data) |
| 579 | Changing InfoObject &1 results in deactivation of InfoProviders |
| 580 | Key figure &1: Aggr. ref. char. changed --> Please adjust aggregates |
| 581 | InfoObject &1 is not an InfoProvider |
| 582 | Characteristic &1: Time dependency entered in the master data table |
| 583 | Char. &1: Attribute &2 is time-dependent (cannot become time-independent) |
| 584 | Characteristic &1: Time-dependency of attribute &2 was changed -> conver. |
| 585 | InfoObject &1 is not activated (attribute could not be converted) |
| 586 | Characteristic &1: The attibutes SID table(s) could not be filled |
| 587 | InfoObject &1: Dependent Objects are deleted |
| 588 | Field name &1 is not for the update - Operation allowed |
| 589 | Char. &1: Assigned app. component &2 does not exist-> NODESNOTCONNECTED |
| 590 | Char.&1 is longer than &2 (authorizations only in internal presentation) |
| 591 | InfoObject &1, version &2: Missing entries in tables were added |
| 592 | Key figure &1: Fixed key figure &2 does not (actively) exist |
| 593 | Key figure &1: Fixed key figure &2 cannot be used |
| 594 | Key figure &1 is a non-cum. value: Fixed key figure is not allowed |
| 595 | Key figure &1 must not be connected to itself |
| 596 | Characteristic &1: InfoObject &2 is not allowed in the compound |
| 597 | Characteristic &1: Constant value &2 is not valid |
| 598 | Characteristic &1: Navigation attribute &2 is used in ref. to char. &3 |
| 599 | InfoObject &1: Attribute tables were successfully converted |
| 600 | ------------- Report messages ------------------------------------------- |
| 601 | Enter a valid InfoCube type selection |
| 602 | Enter an InfoArea |
| 603 | Enter valid selection of objects |
| 604 | All InfoCubes activated |
| 605 | Error during activation. See log for details. |
| 606 | All InfoCubes deleted |
| 607 | Error during deletion. See log for details. |
| 608 | All InfoObject catalogs deleted |
| 609 | Please enter a valid InfoObject catalog selection |
| 610 | Parameter combination is invalid |
| 611 | Error when deleting transfer rules for characteristic &1 |
| 612 | InfoObject &1: Type changed even though InfoObject still in use |
| 613 | Attribute &1 is a key figure with reference (not allowed) |
| 614 | You cannot use system InfoObjects (&1) |
| 615 | &1 is not a name for an InfoObject of an InfoSet (not found) |
| 616 | No association |
| 617 | Fixed unit &1 does not exist in the system |
| 618 | Fixed currency &1 does not exist in the system |
| 619 | No documentation available |
| 620 | ------------- DataStore BAPIs ------------------------------------------ |
| 621 | The time dependency of a Nav. attr. of Characteristic &1 has been changed |
| 622 | Value of field &1 must not differ in parameters &2 and &3 |
| 623 | InfoObject with name &1 exists already |
| 624 | ------------- InfoObject Continuation ---------------------------------- |
| 625 | Conversion routine &2 deleted -- > Check long text |
| 626 | Characteristic &1 Conversion routine change to &2 |
| 627 | Programs for data transfer were regenerated where necessary |
| 628 | &1 does not exist as a master data read class for characteristic &2 |
| 629 | Error in class &1 for characteristic &2 |
| 630 | DDIC object &1 does not exist or is not a structure |
| 631 | Authorization field &1 exists already. Choose a different name |
| 632 | InfoObject &1 does not exist in version &2 |
| 633 | No InfoObjects were found for the selection criteria entered |
| 634 | InfoObject &1 is not available |
| 635 | Column view of InfoProvider &1 will be generated again during activation |
| 636 | Column view of char. &1 will be generated again during activation |
| 637 | &1 is not allowed as an InfoObject (SIDless InfoObject) |
| 638 | InfoObject &1 properties changed; triggered reactivation of HANA models |
| 639 | Error while generating column view. InfoProv. &1 will be deactivated |
| 640 | Error while generating column view. Char. &1 will be deactivated |
| 641 | HANA model of InfoProvider &1 will be generated again during activation |
| 642 | Error while creating Hana Model. InfoProv. &1 will be deactivated |
| 643 | Audit setting cannot be changed. Maximum of 13 dimensions reached. |
| 644 | Selected SAP HANA views cannot be generated for characteristic &1 |
| 645 | Assignments for InfoObject &1 have not yet been maintained -> Long text |
| 646 | Active and saved versions are different. Function not possible. |
| 647 | Maintain the characteristic equivalents for the MultiProvider |
| 648 | Select a maximum of one equivalent for InfoObject &1 in InfoProvider &2 |
| 649 | At least one equivalent must be marked for InfoObject &1 of MultiProvider |
| 650 | ------------------ InfoCubes / InfoObject catalogs ---------------------- |
| 651 | InfoProvider &1 is not of type "multi" or "hybrid" |
| 652 | No InfoProviders involved in MultiProvider &1 were found |
| 653 | Select at least one (involved) InfoProvider |
| 654 | InfoObject &1 is not in any of the affected InfoProviders -> deleted |
| 655 | Rel.: InfoObj. in MultiProvider<-> InfoObj. not found in InfoProvider |
| 656 | Select one equivalent for InfoObject &1 in InfoProvider &2 |
| 657 | Select key figure &1 in at least one InfoProvider |
| 658 | InfoObject &1 does not exist in InfoProvider &2; Assignment was deleted |
| 659 | InfoProvider &1 involved does not exist; Assignment is deleted |
| 660 | InfoCube &1 already exists; please select another name |
| 661 | InfoCube &1 was delivered by SAP ('D' version) |
| 662 | InfoObject catalog &1 already exists; please choose another name |
| 663 | InfoObject catalog &1 was delivered by SAP ('D' version) |
| 664 | MultiProvider &1 uses InfoProvider &3 for invalid component &4 |
| 665 | InfoProvider &1 uses InfoObject &3 for invalid component &4 |
| 666 | InfoObject catalog &1 uses InfoObject &3 for invalid component &4 |
| 667 | MultiProvider with non-cum. values must have unique time-dimensnsion |
| 668 | InfoCube &1 is still in use in MultiProvider &2 |
| 669 | InfoProvider &1 is being used externally |
| 670 | Select partitioning characteristic |
| 671 | Partitioning time characteristic is not contained in the Cube |
| 672 | Define value range for partition. characteristic |
| 673 | Please specify lower and upper limit of partitioning area |
| 674 | Fiscal year variants have to be attached to a fixed value |
| 675 | The line item dimension &1 is already assigned to characteristic &2 |
| 676 | The line item dimension &1 contains more than one characteristic |
| 677 | Error when creating the SID table name for InfoObject &1 |
| 678 | Partitioning error. Use repartitioning tool |
| 679 | Attribute &1 with high card. must not be used as navigation attr. in &2 |
| 680 | Warning: saved version of object &1 is being compared |
| 681 | Warning: saved version of InfoObject catalog &1 is being compared |
| 682 | InfoCube &1 locked by Change and Transport Organizer |
| 683 | InfoObject catalog &1 locked by Change and Transport Organizer |
| 684 | Content version (D) from InfoCube &1 installed |
| 685 | Content version (D) from InfoObjCat &1 installed |
| 686 | Data state variables for InfoProvider &1 installed |
| 687 | InfoArea &1 is not available; changed to NODESNOTCONNECTED |
| 688 | Index &1 for table &2 was created on the database |
| 689 | Database view &1 created |
| 690 | Activity terminated |
| 691 | Secondary index for table &1 has been deleted; not required for high card |
| 692 | Cannot move/delete locked InfoObjects |
| 693 | Database table &1 deleted |
| 694 | Database table &1 could not be deleted |
| 695 | InfoProvider &1 is locked by Change and Transport Organizer |
| 696 | Content version (D) from InfoProvider &1 copied |
| 697 | Cannot remove characteristic/key figure, as InfoCube &1 contains data |
| 698 | Error with transport of InfoCube &1; see log for more details |
| 699 | Compoundings cannot be deleted in InfoObject maintenance (trans. RSD1) |
| 700 | Compoundings cannot be deleted if high cardinality is activated |
| 701 | List contains more than 5000 entries |
| 702 | New InfoArea selected |
| 703 | New InfoCube selected as template |
| 704 | New InfoObject catalog selected as template |
| 705 | New application selected |
| 706 | New InfoSource selected as template |
| 707 | All InfoObjects selected as template |
| 708 | New InfoProvider selected as template |
| 709 | No active version of InfoProvider &1, type &2 |
| 710 | Selections in the template were deleted |
| 711 | No new objects transferred |
| 712 | No further objects could be transferred |
| 713 | Only & further objects could be transferred |
| 714 | Position cursor on data structure or template |
| 715 | Dependent InfoObjects copied (compounding or unit) |
| 716 | No objects reset |
| 717 | Function is only possible if a valid template object is selected |
| 718 | Compounding requires selecting additional navigation attributes |
| 719 | &1: Non-cumulatives and key figures with aggregation <> SUM not allowed |
| 720 | Characteristics w/o assignment can be graphically assigned to dimensions |
| 721 | Warning; update rules exist for the InfoCube/DataStore Object |
| 722 | Select the characteristics to which you want to assign a dimension |
| 723 | InfoObject &1: Enter type |
| 724 | Definition OK |
| 725 | Define at least one characteristic |
| 726 | Define at least one key figure |
| 727 | Transfer superior InfoObject &1 to InfoObject &2 |
| 728 | Transfer characteristic &1 (required for key figure &2) |
| 729 | Assign a dimension to characteristic &1 |
| 730 | Dimension name &1 is not allowed |
| 731 | Dimension &1 not used; delete |
| 732 | Enter texts for all dimensions |
| 733 | Define unit dimension with text |
| 734 | Select at least one time characteristic |
| 735 | Define time dimension with text |
| 736 | Open maintenance screen for dimensions; (definition incomplete) |
| 737 | Dimension name &1 already used in InfoCube &2; rename |
| 738 | Use different dimension names |
| 739 | Define the data package dimension with text |
| 740 | No more dimensions possible; maximum of 13 reached |
| 741 | Dimension &1 contains InfoObjects; cannot delete |
| 742 | Position cursor on a characteristic dimension |
| 743 | Key figure &1: Unit &2 is not contained in the structure |
| 744 | Position cursor on a dimension |
| 745 | Error when saving the active version of the dimension for cube &1 |
| 746 | Error when saving the active version of InfoCube &1 |
| 747 | Error when checking InfoCube &1 |
| 748 | No active version of navigation attribute &1 exists |
| 749 | Dimension &1 saved |
| 750 | Error when saving dimension &1 |
| 751 | Error when saving InfoCube &1 |
| 752 | InfoCube &1 saved |
| 753 | Error when deleting dimension &1 |
| 754 | Error when deleting InfoCube &1 |
| 755 | InfoCube &1 saved and activated |
| 756 | InfoCube &1 activated |
| 757 | Not all objects for InfoCube &1 activated |
| 758 | InfoCube &1 deleted |
| 759 | Dimension &1 (InfoCube &2) deleted |
| 760 | All database tables for InfoCube &1 deleted |
| 761 | Not all database tables could be deleted |
| 762 | All database tables for InfoCube &1 have been created again |
| 763 | Not all database tables could be created again |
| 764 | InfoCube contains more than &1 characteristics, incl. TIM, UNI, CHAR, KYF |
| 765 | InfoCube &1 was reset to the active version |
| 766 | InfoObject catalog &1 was reset to the active version |
| 767 | InfoObject catalog &1 deleted |
| 768 | InfoCube &1 was saved in delivery (SAP) version |
| 769 | InfoObject catalog &1 was saved in delivery (SAP) version |
| 770 | Too many characteristics (&2) are assigned to dimension &1 |
| 771 | A maximum of &1 key figures can be defined |
| 772 | Error when reading the delivery (SAP) version for InfoCube &1 |
| 773 | Error when reading the delivery (SAP) version for InfoObject catalog &1 |
| 774 | Error when reading InfoCube &1 |
| 775 | InfoProvider &1 was copied from version &2 to version &3 |
| 776 | InfoObject catalog &1 was copied from version &2 version &3 |
| 777 | Maximum of &1 InfoObjects allowed in non-cumulative value validity tab |
| 778 | InfoObject catalog &1 could not be copied to version &2 |
| 779 | Error when activating the InfoObject catalog &1 |
| 780 | Error when saving the InfoObject catalog &1 |
| 781 | Error when saving the active version of the InfoObject catalog &1 |
| 782 | InfoObject catalog &1 saved |
| 783 | InfoObject catalog &1 activated |
| 784 | InfoObject catalog &1 deleted |
| 785 | Error when deleting InfoCube &1 |
| 786 | Error when deleting dimension &1 (InfoCube &2) |
| 787 | Error when deleting InfoObject catalog &1 |
| 788 | Object &1 not generated; cannot be deleted |
| 789 | InfoObject/navigation attribute &1 does not exist |
| 790 | Object &1 does not exist |
| 791 | InfoCube/InfoProvider &1 does not exist |
| 792 | Dimension &1 (InfoCube &2) does not exist |
| 793 | Dimension &1 also used in InfoCube &2 |
| 794 | InfoObject catalog &1 does not exist |
| 795 | Table &1 does not exist |
| 796 | View &1 deleted |
| 797 | Relation: InfoCube &1 <-> InfoObjects do not exist |
| 798 | No active version of table &1 available |
| 799 | Internal error occurred when saving the log |
| 800 | Function not yet implemented |
| 801 | InfoProvider &1 is locked by user &2 |
| 802 | System error when locking the InfoCube/MultiProvider |
| 803 | InfoObject catalog &1 is locked by user &2 |
| 804 | System error when locking the InfoObject catalog |
| 805 | Action was terminated (no request) |
| 806 | Delete operation canceled |
| 807 | Displayed queries being deleted |
| 808 | Update rules from InfoSource &2 for InfoProvider &1 are set to "inactive" |
| 809 | Update rules from InfoProvider &2 for InfoProvider &1 set to "inactive" |
| 810 | No authorization for displaying the InfoCube |
| 811 | No authorization for maintaining the InfoCube |
| 812 | No authorization for deleting the InfoCube |
| 813 | No authorization for displaying the InfoObject catalog |
| 814 | No authorization for maintaining the InfoObject catalog |
| 815 | No authorization for deleting the InfoObject catalog |
| 816 | InfoCube &1 could not be saved in an order |
| 817 | InfoCube &1 could not be assigned to an order |
| 818 | InfoObject catalog &1 could not be saved to an order |
| 819 | InfoObject catalog &1 could not be assigned to an order |
| 820 | Version was set to "active/revised" (normal editing) |
| 821 | Warning: Version was set to "SAP delivery" |
| 822 | It was switched to SAP name range |
| 823 | It was switched to customer name range |
| 824 | Invalid object version &1; only 'M', 'A' or 'D' are permitted |
| 825 | InfoObject &1 is not available in active version |
| 826 | Caution! Inactive/ invalid InfoObjects are contained here |
| 827 | Dialog call-up for the InfoObject maintenance |
| 828 | Deletion of 'D' version (SAP delivery) is not permitted |
| 829 | Caution: There are InfoObjects with selection conditions not = "unique" |
| 830 | InfoArea &1 does not exist; please assign a valid InfoArea |
| 831 | Please enter the InfoArea |
| 832 | System type was changed |
| 833 | Please enter InfoObj. type (CHA or KYF) |
| 834 | Please assign valid InfoArea (&1 not available) |
| 835 | Only editing types DISP, INSE, MODI, and DELE are allowed |
| 836 | Only system types SAP (delivery) and CUS (customer) are allowed |
| 837 | Entry value &1 is not permitted (please use F4 help) |
| 838 | Source system &1 does not exist (please use F4 help) |
| 839 | Assign a 3.x InfoSource |
| 840 | No InfoObject catalog found for the selected InfoArea |
| 841 | No InfoCube found for the selected InfoArea |
| 842 | No InfoSource (comm.structure) found for selected application |
| 843 | Object &1 is not (yet) available in the ABAP Dictionary |
| 844 | InfoObjectTyp of catalog has been changed |
| 845 | Choose a reference characteristic for InfoCube non-cumulative values |
| 846 | Define characteristics of the validity table for non-cumulatives (Max 6) |
| 847 | Time reference characteristic cannot be determined -> long text |
| 848 | Transfer &1 as time-ref.characteristic for InfoProvider non-cumul. values |
| 849 | InfoCube contains no non-cumulative values (function not possible) |
| 850 | Dimension &1: Local table entry (RSDDIMELOC) was deleted |
| 851 | Dimension &1: Local table entry (RSDDIMELOC) was created |
| 852 | Dimension &1: Error when writing the initial record to the DB table |
| 853 | Dimension &1: Initial record was successfully written in the DB |
| 854 | All DDIC objects have been activated / deleted |
| 855 | Following tables must be converted: |
| 856 | No time characteristic is suitable as reference characteristic->long text |
| 857 | Non-cumulative value table was deleted |
| 858 | Non-cumulative value validity table could not be deleted |
| 859 | First maintain the non-cumulative parameters ("Menu Extras") |
| 860 | Database table &1 was deleted and recreated |
| 861 | Database table &1 could not be deleted or recreated |
| 862 | Error when reading the DDIC objects for InfoCube &1 |
| 863 | Initial entry written on the status of data of the InfoProvider |
| 864 | InfoCube &1 was set to "inactive" |
| 865 | Stored Procedures for summarization on the DB deleted |
| 866 | InfoCube &1 ist inactive |
| 867 | Enter valid name <> enter SPACE |
| 868 | Please enter valid dimension <> SPACE |
| 869 | Please enter valid InfoObject catalog |
| 870 | Please only enter InfoArea (not InfoObject catalog) |
| 871 | Dimension &1 does not exist |
| 872 | No InfoObjects found for dimension &1 |
| 873 | How are characteristics assigned to dimensions? |
| 874 | InfoObjects/ navigation attributes deleted from the object |
| 875 | Check the InfoCube online |
| 876 | Error when writing the storage parameters for BitMap indices |
| 877 | Error when writing the storage parameters for detached indices |
| 878 | When checking the InfoCube, warnings arose |
| 879 | The option "Optimized for SAP HANA" is obsolete |
| 880 | Only 'M' is allowed as target version |
| 881 | Aggregates for InfoCube &1 were deleted |
| 882 | Errors occurred when deleting the aggregates for InfoCube &1 |
| 883 | &1 is not allowed as an InfoObject (SIDless InfoObject) |
| 884 | InfoObject catalogs of type "not assigned" can only be displayed |
| 885 | Error when checking the InfoObjectCatalog &1 |
| 886 | Check the InfoObject Catalog in the dialog |
| 887 | Time characteristic &1 must be in the validity table |
| 888 | Key figure &1 requires char. &2 for elimination of internal bus. volume |
| 889 | InfoObject &1 not permitted for TLOGO object &2 |
| 890 | InfoObject &1 occurs twice |
| 891 | InfoObject &1 is only allowed as an attribute (not in InfoCubes) |
| 892 | InfoObject &1 may only occur in aggregates |
| 893 | No dimension is assigned to InfoObject &1 |
| 894 | Higher-level InfoObject &1 for InfoObject &2 is not contained |
| 895 | Characteristic &1 (required for key figure &2) does not exist |
| 896 | No messages exist |
| 897 | InfoObject &1 was added |
| 898 | Error when activating the InfoCube & |
| 899 | InfoCube & is already available in version & |
| 900 | Change related to database - a conversion may be required |