R7B - BW Metadata (InfoCube, InfoObject, InfoObject catalog)
The following messages are stored in message class R7B: BW Metadata (InfoCube, InfoObject, InfoObject catalog).
It is part of development package RSD in software component BW-WHM-MTD. This development package consists of objects that can be grouped under "BW: Data Basis InfoObjects and Core Services".
It is part of development package RSD in software component BW-WHM-MTD. This development package consists of objects that can be grouped under "BW: Data Basis InfoObjects and Core Services".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1 &2 &3 &4 |
| 001 | Time granularity char. &1 is missing for stock coverage key figure &2 |
| 002 | Changes to key figure &1 make reactivation of dependent kyfs necessary |
| 003 | Referencing key figure &1 will be reactivated during activation of &2 |
| 004 | InfoObject catalog &1 deleted |
| 005 | InfoProvider &1 is inconsistent. InfoObject &2 does not exist. |
| 006 | TLOGO type &1 not (yet) supported for this operation |
| 007 | InfoProvider &1 deleted |
| 008 | Error while deleting InfoProvider &1 |
| 009 | InfoCube subtype &1 is not valid |
| 010 | Parameter error: InfoProvider names &1 &2 are inconsistent |
| 011 | BW application &1 does not exist |
| 012 | InfoCube type &1 is invalid |
| 013 | Data type &1 does not exist |
| 014 | Size category &1 does not exist |
| 015 | Parameter error: Incorrect InfoProvider name &1 in the dimensions |
| 016 | Dimension &1: Incorrect line item flag (only ' ' and 'X' permitted) |
| 017 | You entered more than one dimension of type &1 (&2) |
| 018 | Dimension &1: InfoObject type &2 is invalid |
| 019 | Dimension name &1 does not comply with InfoProvider &2 |
| 020 | Indicator &1 in dimension name &2 is not permitted |
| 021 | Indicator &1 in dimension name &2 does not comply with type &3 |
| 022 | You must define exactly one time dimension |
| 023 | You must define between 1 and 13 characteristic dimensions |
| 024 | Incorrect InfoProvider name &1 in relation: Dim. InfoObject |
| 025 | Incorrect InfoCube name &1 in relation: InfoProvider- InfoObject |
| 026 | Partitioning characteristic can only be OCALMONTH or OFISCPER |
| 027 | Bearing characteristic &1 for nav. attr. &2 is not contained in InfoProv. |
| 028 | You are not authorized to display all InfoProviders |
| 029 | Time-referenced characteristic &1 for non-cumul. values cannot be changed |
| 030 | Type of InfoCube (&1) cannot be changed |
| 031 | Partitioning time characteristcic &1 cannot be changed |
| 032 | Partitioning time interval cannot be changed |
| 033 | You cannot change the maximum number of partitions &1 |
| 034 | You may not delete dimension &1 |
| 035 | You may not change the property "line item" of dimension &1 |
| 036 | InfoObject &1 must be contained in dimension &2 |
| 037 | InfoObject &1 must be contained in InfoCube |
| 038 | Dimension &1: Incorrect high card flag (only ' ' and 'X' allowed) |
| 039 | Line item dimension &1 contains more than one InfoObject |
| 040 | InfoCube &1 can only be completed "additively" -> long text |
| 041 | Select an InfoCube for proposing the dimensions |
| 042 | InfoObject &1 used in compounding of &2 |
| 043 | InfoProvider &1 (&2) is not connected to HANA fields |
| 044 | Hierarchies and high cardinality cannot be used in InfoObject &1 |
| 045 | Dimension table exit successfully executed for dimension &1 |
| 046 | Error when executing exit for dimension &1 |
| 047 | InfoObject &1 (in compound of characteristic &2) cannot be used |
| 048 | Attribute &1 already exists |
| 049 | HANA-View: Mapping for text field &1 (&2) has been removed |
| 050 | Define at least 2 partitions |
| 051 | Specify a value between 01 and 12 for the month |
| 052 | InfoProvider &1 is not partitioned -> Function not possible |
| 053 | SAP HANA-View: Mapping for InfoObject &1 has been removed |
| 054 | SAP HANA Catalog must not be empty |
| 055 | SAP HANA Attribute View must not be empty |
| 056 | Proposal for SAP HANA Mapping is not possible |
| 057 | Short text was selected |
| 058 | Medium short text was selected |
| 059 | Long text was selected |
| 060 | A proposal for ALL InfoObjects has been created |
| 061 | A proposal has been created for the current InfoObject |
| 062 | No characteristics have been defined |
| 063 | No key figures have been defined |
| 064 | Line item flag reset for dimension &1 |
| 065 | Action canceled; InfoProvider &1 could not be unlocked |
| 066 | Error while merging InfoProvider &1 with source object &2 |
| 067 | No corresponding provider found in the source for provider &1 |
| 068 | Attribute &1 has been added |
| 069 | Key date (1KEYDATE) is not mapped even though view contains inp. param. |
| 070 | Error during activation of content. See application log for details. |
| 071 | Check InfoProvider &1 (type &2) |
| 072 | Mapped input parameter &1 does not exist for key date (1KEYDATE) |
| 073 | Master data access type &1 and high card. cannot be used in InfoObject &2 |
| 074 | Master data read access has been reset |
| 075 | High Cardinality option set for InfoObject |
| 076 | InfoObject &1 (version &2) does not have any XXL attributes |
| 077 | Characteristic &1 has no XXL attributes. XXL attributes are deleted. |
| 078 | XXL attribute &1 is used twice in characteristic &2 |
| 079 | Stock coverage key figures must be of type Quantity, Number or Integer |
| 080 | HANA model: Field &2 does not exist in object &3 (&4) (InfoObject &1) |
| 081 | View field for attribute &1 must not be empty |
| 082 | Ref. charact. for except. aggr. has to be defined for stock Cov. key fig. |
| 083 | Ref. charact. for except. aggr. has to be a total time characteristic |
| 084 | XXL attributes copied to the clipboard |
| 085 | Referenced stock key figure is missing |
| 086 | Referenced demand key figure is missing |
| 087 | Type of stock coverage calculation has been changed to 'Derived' |
| 088 | Number of stock coverage periods is &1 |
| 089 | InfoObject &1 is used in SAP HAP(s) - 'High Cardinality' is not allowed |
| 090 | A referenced demand key figure must be a cumulative key figure |
| 091 | The Fixed Unit of Measure field is empty |
| 092 | Stock coverage key fig. &1 is not allowed as NCUM value change key figure |
| 093 | Stock coverage key figure &1 is not allowed as inflow key figure |
| 094 | Stock coverage key figure &1 is not allowed as outflow key figure |
| 095 | Key figure &1 will be reactivated during activation of &2 |
| 096 | Audit InfoObject &1 does not exist in version &2 |
| 097 | Aggregation of referenced key figure &1 changed. Aggregation adjusted. |
| 098 | Not all required audit characteristics are active |
| 099 | Type of ref. Stock KYF &1 is not same as type of ref. Demand KYF &2 |
| 100 | Fixed unit of measure &1 removed since it was not a TIME unit |
| 101 | Stock coverage key figure &1 not allowed as attribute for characteristics |
| 102 | Time Granularity char. &1 not contained in MultiProvider &2 |
| 103 | Attribute &1 is not of type XXL, not allowed as XXL attribute in char. &2 |
| 104 | The system does not support copying of type &1 InfoObjects |
| 105 | InfoObject &1 is compounded to &2 but not contained in version A of &3 |
| 106 | Provider &1 is still in use in CompositeProvider &2 |
| 107 | Provider &1 is still in use in provider &2 |
| 108 | Provider &1 is still in use in MultiProvider &2 |
| 109 | Length changed, but InfoObject &1 is used as a key field in DSO &2 |
| 110 | Parameter error: InfoObjCat names &1 &2 are inconsistent |
| 111 | InfoObject &1 is of type &2 -> deleted from catalog (type &3) |
| 112 | Catalog type &1 is not permitted (only CHA and KYF) |
| 113 | Catalog set to type &1 (type of template &2) |
| 114 | ------------------------------------------------------------------------- |
| 115 | Parameter error: Incorrect catalog name &1 in relation: Cat. InfoObjects |
| 116 | InfoObject &1 is used in HCPR &2 |
| 117 | InfoObject &1 is used in HCPR &2 (contains data) |
| 118 | InfoObject &1 is used in Advanced DataStore object &2 |
| 119 | InfoObject &1 is used in Advanced DataStore object &2 (contains data) |
| 120 | First select the nodes to be sorted |
| 121 | No input available |
| 122 | Navigation attribute &1 of characteristic &2 is correct in version &3 |
| 123 | Navigation attribute &1 of characteristic &2 is wrong in version &3 |
| 124 | Navigation attribute name is &1, should be &2 |
| 125 | Checking navigation attributes of characteristic &1 |
| 126 | Action canceled |
| 127 | All checked characteristics are consistent |
| 128 | One entry adjusted |
| 129 | &1 entries adjusted |
| 130 | All entries are consistent |
| 131 | Inconsistent entries are displayed on next screen |
| 132 | The following settings have been automatically adjusted: |
| 133 | Setting '&1' adjusted from incorrect value '&2' to '&3' |
| 134 | Nav. attribute &1 for characteristic &2 as InfoProvider cannot be used |
| 135 | Local characteristics are impacted by changes made to InfoObject &1 |
| 136 | Rounding inaccuracies occur with data type FLOAT for AMOUNT and QUANTITY |
| 137 | InfoObject &1 is locked by user &2 |
| 138 | Attribute &1 not allowed |
| 139 | Type &1 of attribute &2 not allowed |
| 140 | Error during runtime InfoObject access |
| 141 | InfoObject &1 exists in version &2, but has unexpected type &3 |
| 142 | InfoObject name is initial |
| 143 | InfoObject ID is initial |
| 144 | Advanced DataStore Object &1 set to "inactive" |
| 145 | SAP HANA CompositeProvider &1 set to "inactive" |
| 146 | Constant missing for attribute &1 |
| 147 | Attribute &1 cannot be time-dependent |
| 148 | Input help only available in active version |
| 149 | Key figure &1: Aggregation changed from SUM to &2 |
| 150 | Copying aggregates (&1) is not supported |
| 151 | Conversion exit &1 used: Length reduction not allowed |
| 152 | Conversion exit &1 used: Length does not match length of domain MATNR |
| 153 | Characteristic &2: Cannot edit compound &1 in master data maintenance |
| 154 | Action is not supported by InfoObject &1 |
| 155 | InfoObject &1 is not a geo-characteristic |
| 156 | No actions allowed for geo-characteristics with values from attribute |
| 157 | No entries exist |
| 158 | InfoObject &1 is not allowed to be used as an attribute |
| 159 | Changes saved |
| 160 | Copy process terminated for InfoProvider &1 |
| 161 | Copy process terminated for MultiProvider &1 |
| 162 | Copy process terminated for InfoObject Catalog &1 |
| 163 | Copy process terminated for HybridProvider &1 |
| 164 | SAP HANA analysis process &1 re-activated |
| 165 | SAP HANA analysis process &1 could not be re-activated |
| 166 | SAP HANA analysis process &1 will be reactivated during activation |
| 167 | No entries modified |
| 168 | Report is only supported on SAP HANA systems |
| 169 | Settings for exception aggregation have automatically been adjusted |
| 170 | InfoCube &1 is part of a semantically. part. InfoCube. Cannot delete |
| 171 | DataStore &1 is part of a semantically part. DataStore. Cannot delete |
| 172 | Active version of DataStore object &1 exists. Cannot delete. |
| 173 | Modified version of DataStore object &1 does not exist |
| 174 | Action canceled |
| 175 | Entries successfully removed |
| 176 | Entries could not be removed |
| 177 | Key figure &1 has data type INT8 and is not supported |
| 178 | Enhanced master data update cannot be disabled for characteristic &1 |
| 179 | Error while setting table structure in table service |
| 180 | Error while putting DDIC information in database using table service |
| 181 | Error while cleaning up DDIC information using table service |
| 182 | Key figure &1 cannot be used as a navigation attribute |
| 183 | SAP HANA analysis process &1 will be regenerated upon next execution |
| 184 | Master data settings cannot be changed due to enhanced master data update |
| 185 | Master data settings cannot be changed due to enhanced master data update |
| 186 | Master data settings cannot be changed due to enhanced master data update |
| 187 | Master data settings cannot be changed due to enhanced master data update |
| 188 | Non-cumulative key figure &1 cannot be used in this InfoProvider |
| 189 | Non-cumulative key figure &1 should not be used in this InfoProvider |
| 190 | Attribute &1 cannot be enabled as navigation attribute |
| 191 | &1 InfoObjects selected for migration |
| 192 | The following InfoObjects are migrated to the displayed InfoAreas |
| 193 | Please confirm |
| 194 | Do you wish to proceed? |
| 195 | InfoObjects already migrated |
| 196 | System is migrated |
| 197 | System is not migrated |
| 198 | &1 / &2 InfoObjects (&3%) |
| 199 | Migration is running in simulation mode first |
| 200 | ------------- InfoObjects Continuing from R7 ---------------------------- |
| 201 | Characteristic &1: Too many attributes selected for input help |
| 202 | Characteristic &1: BOR object type &2 has been copied in version &3 |
| 203 | Characteristic &1 is a BOR object: OLOGSYS must be an attribute |
| 204 | Key figure &1: Elimination is incomplete (row &2) |
| 205 | Key figure &1: Char. &2 from elimination is not actively available |
| 206 | Characteristic &1 and &2 from elimination must have the same reference |
| 207 | Characteristic &2 is an attribute and not allowed in elimination |
| 208 | InfoObject &2 cannot be used in elimination |
| 209 | Characteristic &2 is used twice in row &3 of the elimination |
| 210 | Navigation attribute &1 is still used in elimination of key figure &2 |
| 211 | Authorization field &1 has to be in generation namespace &2 |
| 212 | InfoObject &1: Name of authorization field &2 cannot be changed |
| 213 | Transfer routine deleted in copy &1 |
| 214 | Characteristic &1: Sequence changed in compounding (Char. &2)(->longtext) |
| 215 | Authorization field name &1 for InfoObject &2 already allocated |
| 216 | Characteristic &1 has more than &2 navigation attributes -> Performance |
| 217 | Characteristic &1: Conversion routine &2 was deleted |
| 218 | &1: The interval for number range object &2 does not exist |
| 219 | &1: Interval for number range object &2 was created &3 |
| 220 | &1: Error when creating interval for number range object &2 &3 |
| 221 | &1: Status of number range &2 is too small by &3 |
| 222 | &1: Status of number range &2 was corrected |
| 223 | &1: Error when correcting number range status for &2 |
| 224 | Characteristic &1: More than &2 fields are selected for the input help |
| 225 | Table &1 is locked by DDIC conversion - cannot be activated |
| 226 | Characteristic &1: InfoArea &2 deleted, although update rules exist |
| 227 | Reference changed for characteristic &1 - Attribute SID tables built |
| 228 | Attribute SID tables for the following characteristics have to be rebuilt |
| 229 | Characteristic &1: Error when specifying new SIDS for attributes |
| 230 | &1: Maximum ID has exceeded the upper limit of number range &2 |
| 231 | Attributes SID table &1 was deleted and refilled |
| 232 | InfoObject &2 was inserted from compounding of reference char. &3 |
| 233 | Error in class &1 (reset generation status) |
| 234 | "Attribute Exclusively" property was changed by characteristic &1 |
| 235 | Check of compounded characteristic values for InfoObjects involved |
| 236 | Characteristic &1 has hierarchies that include concatenated values |
| 237 | Char. &1 has hierarchies that can include concatenated values from &2 |
| 238 | Characteristic &1: Concatenated values used in documents for master data |
| 239 | Characteristic &1: Concatenated values used in docs for InfoProvider data |
| 240 | Navigation attribute number &1 from characteristic &2 is inconsistent |
| 241 | InfoObject &1 cannot be saved due to inconsistencies |
| 242 | InfoObject &1: Application component &2 transferred from Content version |
| 243 | InfoObject &1: InfoArea &2 transferred from the Content version |
| 244 | Key figure &1 is an attribute of characteristic &2, but unit &3 is not |
| 245 | Communication structure &1 is inconsistent and has to be reactivated |
| 246 | An internal error has occurred when generating the quantity DS |
| 247 | Char. &1 still being used as reference by &2 -reference cannot be changed |
| 248 | An internal error occurred during navigation to DataStore object |
| 249 | DataStore object could not be found |
| 250 | The output length &1 is not allowed |
| 251 | InfoObject &1: Text type &2 inconsistent for properties of text table &3 |
| 252 | Characteristic &1: Constant value not permitted |
| 253 | Char.&1: Units of measure for char.were not generated |
| 254 | Char.&1: Qty DataStore obj.&2 not avail.in active version |
| 255 | You must enter the name of the quantity DataStore object |
| 256 | Char.&1: Base unit of measure has been changed (-> long text) |
| 257 | Char.&1: Qty DataStore &2: Compounding has been changed (-> long text) |
| 258 | Objects for Temporal Hierarchy Join have been activated |
| 259 | Objects for Temporal Hierarchy Join could not be generated |
| 260 | Property "Exclusive Attribute" of characteristic &1 was deactivated |
| 261 | You must generate new SIDs for the characteristic values in DS object &1 |
| 262 | Error while generating SIDs for the characteristic values in DS object &1 |
| 263 | SIDs created for the characteristic values in DataStore object &1 |
| 264 | An InfoObject-related error has occured |
| 265 | Characteristic values of &1 cannot be checked |
| 266 | Characteristic &1 is locked due to master data deletion |
| 267 | Objects for Temporal Hierarchy Join have been deleted |
| 268 | Objects for Temporal Hierarchy Join could not be deleted |
| 269 | The ABAP class name for characteristics with remote master data set |
| 270 | &2 entries in table &1 changed |
| 271 | Characteristic type set |
| 272 | Characteristic &1: Class name and characteristic type set |
| 273 | Writing to table &1 not successful |
| 274 | Characteristic &1 with temporal hier. join can have maximum &2 characters |
| 275 | SAP HANA/BWA index for &1 must be adjusted |
| 276 | SAP HANA/BW Accelerator indexes deleted |
| 277 | Error while deleting the SAP HANA/BW Accelerator indexes |
| 278 | Has to be flagged as InfoProvider for remote master data access |
| 279 | Has to be flagged as InfoSource for remote master data access |
| 280 | Navigation attributes are not permitted for this master data access |
| 281 | Characteristic &1: Name of master data access class not specified |
| 282 | Characteristic &1: Invalid master data access class &2 |
| 283 | InfoObject &1 is not assigned to an InfoObject catalog |
| 284 | Not All InfoObjects Can Be Read (See Long Text) |
| 285 | Reference Object for InfoObject &1 |
| 286 | Path for field of node structure |
| 287 | Characteristic &1 has appends. Cannot delete master data |
| 288 | Characteristic &1 has appends. Cannot delete |
| 289 | Length of InfoObject &1 is invalid; InfoObject is selected as UUID |
| 290 | Output length of InfoObject &1 is invalid |
| 291 | InfoObject &1 is compounded and selected as UUID |
| 292 | Characteristic &1: No determination of new SIDs for attributes |
| 293 | InfoObject &1: Name of ESR reference is incomplete |
| 294 | External key of characteristic &1 must be an attribute |
| 295 | InfoObject &1: You are not authorized to change authorization relevance |
| 296 | Characteristic &1 is being used as navigation attribute; see long text |
| 297 | Cannot use characteristic &1 in this system for RDA |
| 298 | Characteristic &1 does not have master data or texts; see long text |
| 299 | External key of characteristic &1 is a navigation attribute |
| 300 | Warning: Comparing saved version of object |
| 301 | Object is not available in version &1 ( &2 ) |
| 302 | HybridProvider &1 not available in version &2 |
| 303 | HybridProvider &1 does not exist |
| 304 | Checking HybridProvider &1 |
| 305 | HybridProvider &1 is consistent |
| 306 | Inconsistencies found while checking HybridProvider &1 |
| 307 | HybridProvider &1 has not been locked yet |
| 308 | Error while determining the InfoObject name |
| 309 | Postprocessing for (not activated) HybridProvider &1: |
| 310 | Caution: HybridProvider &1 is still being used |
| 311 | HybridProvider &1 (temporarily) set to inactive |
| 312 | HybridProvider &1 saved |
| 313 | Error while saving HybridProvider &1 |
| 314 | HybridProvider &1 activated |
| 315 | Error while activating HybridProvider &1 |
| 316 | Error while deleting HybridProvider &1 |
| 317 | Caution: DataStore/VirtualProvider is part of a HybridProvider |
| 318 | Do not select template and "based on ..." at the same time |
| 319 | HybridProvider &1 locked by Change and Transport Organizer |
| 320 | Resetting HybridProvider &1 to active version |
| 321 | HybridProvider &1 reset to active version |
| 322 | Error while resetting HybridProvider &1 to active version |
| 323 | Object &1 belongs to higher-level InfoProvider &2; Display only |
| 324 | Object changed (InfoObjects added) |
| 325 | Check again before activating the HybridProvider |
| 326 | Characteristic &1: Name of remote hierarchy class not specified |
| 327 | Characteristic &1: Invalid remote hierarchy access class &2 |
| 328 | Interface method &1 of class &2 not implemented |
| 329 | Attribute &2 of characteristic &1 is used in aggregates |
| 330 | You are not authorized to use HybridProvider &1 |
| 331 | Error while initializing HybridProvider &1 |
| 332 | Regenerating data flow environment for HybridProvider |
| 333 | Remote hierarchy class does not support version-dependent hierarchies |
| 334 | Remote hierarchy class does not support time-dependent total hierarchy |
| 335 | Remote hierarchy class does not support time-dependent hierarchy struct. |
| 336 | Remote hierarchy class does not support any intervals |
| 337 | Data saved |
| 338 | Could not save data |
| 339 | Select a row |
| 340 | No note exists for this parameter |
| 341 | Note opened in new window |
| 342 | Characteristic &1: Error while scanning SIDs for attribute &2 |
| 343 | Call hierarchy: (Include line block type block name) |
| 344 | Navigation attributes cannot be used in all InfoProvider types |
| 345 | Characteristic &1 (length &2) cannot be used as a document property |
| 346 | SAP HANA CompositeProvider &1 deactivated |
| 347 | Characteristic &1: base unit of measure &2 must also be an attribute |
| 348 | Characteristic &1: InfoArea &2 removed, but Comp.Provider (HCPR) exists |
| 349 | SAP HANA analysis process &1 reactivated |
| 350 | Characteristic &1 is disabled as InfoProvider but update rules exist |
| 351 | Characteristic &1 is disabled as an InfoProvider, but HCPR exists |
| 352 | Characteristic &1 not InfoProvider; InfoArea/navig. attributes deleted |
| 353 | Characteristic &1: enabled as InfoProvider for basic characteristic only |
| 354 | Characteristic &1, version &2: Cannot disable InfoProvider setting |
| 355 | Master data read class &1 not actively available |
| 356 | No active version exists for &1. Master data read class cannot be checked |
| 357 | No name maintained for Units of Measure DataStore object |
| 358 | Attribute &1 is not an XXL InfoObject; cannot be used as an XXL attribute |
| 359 | Do you want to run the migration process? |
| 360 | Simulation failed |
| 361 | Migration successful |
| 362 | Migration failed. See application log for details |
| 363 | Switched back to InfoObject catalogs |
| 364 | Migration is running... |
| 365 | InfoObject &1 assigned to InfoArea &2 |
| 366 | Reading data... |
| 367 | Simulation finished |
| 368 | InfoObjects not migrated yet |
| 369 | Reversion is running... |
| 370 | Reversion successful |
| 371 | Reversion failed. See application log for details. |
| 372 | Do you want to run the reversion process? |
| 373 | Transitive attribute &1 removed since not allowed |
| 374 | Adjusting BW Search... |
| 375 | Action canceled. Use BW Modeling Tools InfoObject Maintenance instead. |
| 376 | Invalid name: '__' is reserved for navigation attribute |
| 377 | Navigation attributes cannot be used in InfoProviders |
| 378 | Defined length must be between 2 and 32 for conversion exit SNUMC |
| 379 | Output length should be greater than or equal to the length |
| 380 | Recommended output length for length &1 is &2 |
| 381 | Important information before you run migration |
| 382 | Have you read the information on migration and do you want to continue? |
| 383 | Selected values for lower and/or upper limit are not valid |
| 384 | Enhanced master data update is not allowed |
| 385 | Class &1 must not be used |
| 386 | All objects are correct |
| 387 | The OLAP cache mode for the following objects will be changed as shown |
| 388 | Do you want to change the objects as shown in the previous dialog? |
| 389 | Characteristic &1: OLAP cache mode set to &2 (was &3) |
| 390 | Could not complete processing |
| 391 | Processing successful |
| 392 | Automatic table conversion is enabled |
| 393 | Table &1 is being automatically converted... |
| 394 | The affected InfoObjects are being reactivated... |
| 395 | InfoObject &1 |
| 396 | Generating column view for characteristic &1 and dependent objects... |
| 397 | Object &1 is not a generated quantity DataStore object and cannot be used |
| 398 | DataStore object created for another characteristic and cannot be used |
| 399 | Either object &1 does not exist or you are not authorized to display it |
| 400 | Enter the namespace, generation namespace, and active flag |
| 401 | Clarification of BW default namespaces |
| 402 | Clarification of BW partner namespaces |
| 403 | The generation namespace &1 is not allowed here |
| 404 | The namespace &1 does not exist or is invalid |
| 405 | Entries have been saved in the BW partner namespace |
| 406 | Entries saved in the BW default namespaces (local system) |
| 407 | Multiple usage of generated namespace &1 is not allowed |
| 408 | Multiple use of object namespace & not allowed |
| 409 | Deactivating an active BW partner namespace can cause problems |
| 419 | InfoObject &1 cannot be saved or activated without master data or text |
| 420 | Attribute &1 must be a pure display attribute. |
| 421 | Attribute &1 must be time-independent. |
| 422 | MIME type must not be initial |
| 423 | MIME type should be selected |
| 426 | Either object &1 does not exist or you are not authorized to display it |
| 490 | Invalid calendar week &1 |
| 500 | ------------- Reorg Program --------------------------------------------- |
| 501 | Checking all tables for currency/quantity key figures... |
| 502 | Error while reading key figures |
| 503 | Error in where-used list of key figure &1 |
| 504 | Error while reading data element of &1 |
| 505 | Checking InfoCube... |
| 506 | Error while reading table names of &1 &2 |
| 507 | Error while reading table fields of &1 |
| 508 | Error while reading view fields of &1 |
| 509 | Checking DataStore object... |
| 510 | Error while reading view name of &1 &2 |
| 511 | Checking InfoSource... |
| 512 | Checking characteristic... |
| 513 | Check custom table |
| 514 | InfoCubes |
| 515 | InfoSources |
| 516 | DataStore Objects |
| 517 | Custom tables (created yourself) |
| 518 | Characteristics |
| 519 | Checking tables (object type: &1)... |
| 520 | All tables are consistent |
| 521 | Specify reference table and reference field |
| 522 | Activate the table(s) |
| 523 | Inconsistent table(s) (object type: &1) |
| 524 | Error while writing application log |
| 525 | Characteristic &1 version &2: Correcting 'sort by external format' |
| 526 | InfoObject &1 has empty ESR reference. Deleting entry... |
| 527 | InfoObject &1 has correct ESR reference but no further entries |
| 528 | ESR reference for InfoObject &1 is not the same in all versions |
| 529 | No entry for InfoObject &1 in object catalog in version &2 |
| 530 | Migrated DPA InfoObject &1: Copied entry from RSDDPA to RSDCHABAS/-LOC |
| 580 | Data type QUAN is not allowed for stock coverage key figures |
| 600 | ------------- InfoObject Messages Continued ----------------------------- |
| 601 | Characteristic &1: UUID characteristic changed and used in data target |
| 602 | Characteristic &1: External key is time-dependent attribute |
| 603 | Characteristic &1: Index deleted using external UUID key |
| 604 | Characteristic &1: Index not deleted using external UUID key |
| 605 | Cannot use characteristic &1 for OBN. See long text. |
| 606 | Error while creating temporal hierarchy join characteristic |
| 607 | Characteristic &1 is in compound and in attributes. See long text. |
| 608 | Own master data read class and InfoProvider property not possible |
| 609 | Characteristic &1, version &2: Cannot remove InfoArea |
| 610 | Characteristic &1; master data access class does not deliver short text |
| 611 | Characteristic &1; master data access class does not deliver medium text |
| 612 | Characteristic &1; master data access class does not deliver long text |
| 613 | Char. &1: master data access class does not offer language dependency |
| 614 | Char. &1: master data access class does not offer time dependency |
| 615 | Char. &1: master data access class does not offer any master data |
| 616 | Char. &1: master data access class does not deliver any texts |
| 618 | Characteristic &1 cannot be selected as UUID in this system |
| 619 | Characteristic &1 selected as UUID; compounding deleted |
| 620 | Characteristic &1 selected as UUID and used in compound |
| 621 | Characteristic &1: You can only change the InfoArea of basic characters |
| 622 | InfoObject &1: Master data maintenance not available |
| 623 | Characteristic &1: No interval allowed in hierarchy because UUID charact. |
| 624 | InfoObject &1: No temporal hierarchy join characteristic assigned |
| 625 | InfoObject &1: Temporal hierarchy join characteristic &2 does not exist |
| 626 | InfoObject &1: Temporal hierarchy join char. &2 attribute incorrect |
| 627 | Characteristic &1: Cannot set characteristic constant; see long text |
| 628 | Characteristic &1: Cannot delete characteristic constant; see long text |
| 629 | Characteristic &1: Constant set in InfoProvider &2; see long text |
| 630 | Key figure &1: Exception aggregation 'Sum' selected |
| 631 | Key figure &1: Aggregation 'Total' selected |
| 632 | InfoObject &1: DDIC object &2 (type &3) is not active |
| 633 | You are not authorized to delete authorization-relevant InfoObject &1 |
| 634 | Key figure &1: (Exception) aggreg. 'Total' not allowed for data type &2 |
| 635 | Processing characteristic &1 in version &2... |
| 636 | Error while writing changes to time characteristics |
| 637 | Changes to time characteristics successfully saved |
| 638 | Time char. &1 version &2: &3 saved as external hierarchy characteristic |
| 639 | Time characteristic &1 does not exist in version &2 |
| 640 | Characteristic &1: Number range object &2 also used by characteristic &3 |
| 641 | Characteristic &1: Unit &2 not allowed in compounding |
| 642 | Characteristic &1 still used in data archiving process &2 |
| 643 | External UUID key deleted |
| 644 | Conversion routine for UUID characteristic deleted |
| 645 | Ext. UUID key and conversion routine may not be selected at same time |
| 646 | Conversion exit ALPHA removed |
| 647 | InfoObject &1: BusinessObject &2 (namespace &3) does not exist |
| 648 | InfoObject &1: BusinessObject node &2 (namespace &3) does not exist |
| 649 | InfoObject &1: BusinessObject attribute &2 (namespace &3) does not exist |
| 650 | BWA indexes are not allowed for time-dependent hierarchies |
| 651 | BWA indexes available for characteristic &1 |
| 652 | Characteristic &1: Base unit of measure &2 is not allowed |
| 653 | BWA index not allowed for hierarchies of time characteristics |
| 654 | No attributes found for the specified search criteria |
| 655 | No more attributes found for the specified search criteria |
| 656 | Error while building the selection screen |
| 657 | Report for finding InfoObjects is already running |
| 658 | Indicator for high precision has been reset |
| 659 | Invalid transfer: I_READ_ALL or I_T_INFOCUBES or I_IOBJNM |
| 660 | InfoObject &1 is used as an attribute in InfoProvider &2 (IOBJ) |
| 661 | Key figure &1 cannot be used in &2 (InfoObject) |
| 662 | Characteristic &1 with high cardinality must not be used in &2 (&3) |
| 663 | High cardinality cannot be activated for characteristic &1 |
| 664 | Characteristic &1 used in DSO with data. High card. change not possible |
| 665 | Characteristic &1 contains data. High cardinality change not possible |
| 666 | Char. &1 used in DSO with data. Master Data property cannot be changed. |
| 667 | Characteristic &1 with high card. should be at least &2 characters long |
| 668 | XXL attribute &1 is not allowed as a regular attribute |
| 669 | InfoCube &1 is SAP HANA-optimized, so should only have an F-fact table |
| 670 | InfoCube &1 is not SAP HANA-optimized, but only has an F-fact table |
| 671 | InfoCube &1 is flat, so should only have an F-fact table |
| 672 | InfoCube &1 is not flat, but only has an F-fact table |
| 673 | Enhanced master data update is already active and cannot be switched off |
| 674 | Attribute &1 cannot be used as a transitive attribute &2 in InfoObject &3 |
| 675 | Attribute &1 is not maintained for characteristic &2 |
| 676 | Attribute &1 cannot be used as transitive attribute &2 in characteristic |
| 677 | Transitive attribute &1 cannot be enabled as a navigation attribute |
| 678 | Transitive attribute &1 cannot be enabled as a time-dependent attribute |
| 679 | Transitive attribute &1 is used as a navigation attribute in &2 |
| 680 | Not visible attribute &1 is used as a transitive attribute in &2 |
| 681 | Types of attribute &1 and attribute &2 of characteristic &3 are not equal |
| 682 | Basic characteristics of attribute &1 and &2 are not equal |
| 683 | Data types of attribute &1 and &2 are different |
| 684 | 0RECORDMODE is not allowed as attribute for characteristic &1 |
| 685 | Transitive attribute &1 not allowed for non-default master data access |
| 686 | Attribute &1 not general. Cannot be used as nav. attrib. InfoProv. in &2. |
| 687 | You're not authorized to display or change InfoObjects. |
| 688 | You're not authorized to run this report. |
| 689 | |
| 690 | Dependent on Nav. Attr &1 and Nav. Attr &2 cannot be the same |
| 691 | Dependent on Nav. Attr &1 and Nav. Attr &2 have cyclic dependencies. |