REAJME - Nachrichten Anpassungsverfahren
The following messages are stored in message class REAJME: Nachrichten Anpassungsverfahren.
It is part of development package RE_AJ_ME in software component RE-FX-AJ. This development package consists of objects that can be grouped under "RE: Adjustment Methods".
It is part of development package RE_AJ_ME in software component RE-FX-AJ. This development package consists of objects that can be grouped under "RE: Adjustment Methods".
Message Nr ▲ | Message Text |
|---|---|
| 000 | &1 &2 &3 &4 |
| 001 | &1: entry is required for base year |
| 002 | &1: base year &2 does not exist |
| 003 | &1: an entry is required for the index series |
| 004 | &1: index series &2 does not exist |
| 005 | &1: the minimum change fields are not filled |
| 006 | &1: enter either first index level or start of index |
| 007 | &1: there is no index level on &2 for index series &3 |
| 008 | &1: index level (&2) not the same as 1st index level at index start |
| 009 | &1: the minimum change rate has to be between 0 and 100 |
| 010 | &1: make an entry for the adjustment frequency |
| 011 | &1: first adjustment from-date must be before condition start date &2 |
| 012 | &1: contract type &2 does not exist |
| 013 | &1: usage type &2 does not exist |
| 014 | &1: adjustment condition type &2 does not exist |
| 015 | &1: this method requires parameters |
| 016 | &1: enter either the contract type or only the usage type |
| 017 | &1: enter either increase or an absolute amount |
| 018 | &1: enter only one amount - absolute increase, abs. unit, or & increase |
| 019 | &1: condition type &2 is not allowed for contract type &3 |
| 020 | &1: condition type &2 is not allowed for usage type &3 |
| 021 | &1: enter at least one settlement ID |
| 022 | &1: enter the currency |
| 023 | &1: enter the frequency |
| 024 | &1: enter the calculation formula |
| 025 | &1: enter parameter 1 for the calculation formula |
| 026 | &1: enter parameter 2 for the calculation formula |
| 027 | &1: carryover condition type &2 does not exist |
| 028 | &1: for carryover you need to enter the adjustment condition type |
| 029 | Adjustment method is not yet implemented |
| 030 | &1: no adjustment since validity of condition unsuitable |
| 031 | &1: no adjustment, since appropriate parameter not found |
| 032 | &1: no adjustment due to different calculation formula |
| 033 | Correction: System considers pass-on percentage of &1 of rental object |
| 034 | Correction: System considers pass-on percentage of &1 of adjustment rule |
| 035 | Correction: No adjustment on &1, since only increases are allowed |
| 036 | Correction: No adjustment on &1, since only reductions are allowed |
| 037 | Correction: Unit price rounded from &1 to &2 |
| 038 | &1: no adjustment since the condition is locked |
| 039 | Adjustment date: Calculated valid-from date &1 replaced by modified &2 |
| 040 | Adjustment date: Valid-from date &1 since before condition start |
| 041 | &1: no adjustment since different condition amount reference |
| 042 | &1: no adjustment since different currency |
| 043 | &1: no adjustment since different frequency |
| 044 | Parameter conversion - formula from &1 to &2 |
| 045 | Parameter conversion - currency from &1 to &2 |
| 046 | Parameter conversion - frequency from &1 to &2 |
| 047 | Parameter conversion - condition amount reference from &1 to &2 |
| 048 | &1: no adjustment due to advance payment/flat rate |
| 049 | Adjustment date: base date is valid-from &1 of condition |
| 050 | Adjustment date: no frequency delay since frequency not defined |
| 051 | Adjustment date: delayed until start of frequency &1 |
| 052 | Adjustment date: Delayed by &1 frequency months until &2 |
| 053 | Adjustment date: Delayed by &1 frequency quarters until &2 |
| 054 | Adjustment date: Delayed by &1 frequency years until &2 |
| 055 | Corection: New unit price calculated is initial |
| 056 | Adjustment date: delayed until next possible notice date &1 |
| 057 | Adjustment date: delayed until start of next period &1 of condition |
| 058 | Adjustment date: Calculated valid-from date &1 replaced by modified &2 |
| 059 | Adjustment date: set to entered date &1 |
| 060 | Adjustment date: Calculated valid-from date &1 delayed until &2 |
| 061 | Adjustment date: Calculated valid-from date &1 reduced to &2 |
| 062 | No condition found for date &1 of last adjustment |
| 063 | No condition found for date &1 of first adjustment |
| 064 | Adjustment date: delayed until &1 due to exceeded change in points |
| 065 | Adjustment date: delayed until &1 due to achieved change in points |
| 066 | Adjustment date: delayed until &1 due to exceeded percentage change |
| 067 | Adjustment date: delayed until &1 due to percentage change reached |
| 068 | Adjustment date: cannot determine delay based on minimum change |
| 069 | No index points &1/&2 found on &3 |
| 070 | No index points found on the date of the last adjustment &1 |
| 071 | No index points found on the date of the first adjustment &1 |
| 072 | No index points found for today's date &1 |
| 073 | Adjustment date: not possible to determine reduction by minimum date |
| 074 | Adjustment date: reduced to &1 due to exceeded percentage change |
| 075 | Adjustment date: reduced to &1 due to percentage change being reached |
| 076 | Adjustment date: reduced to &1 due to exceeded change in points |
| 077 | Adjustment date: reduced to &1 due to change in points being reached |
| 078 | Adjustment date: base date replaced by &1 (first adjustment from-date) |
| 079 | No condition amount found for date &1 of last adjustment |
| 080 | No condition amount found for date &1 of first adjustment |
| 081 | No condition found for date &1 |
| 082 | No condition amount found for date &1 |
| 083 | Adjustment date: earliest with threshold &1 |
| 084 | Adjustment date: latest with threshold &1 |
| 085 | Adjustment date: rebasing from &1/&2 to &3/&4 is being performed |
| 086 | Adjustment date: minimum point change from &1 to &2 rebased |
| 087 | &1: no adjustment due to error in calculation of adjustment date |
| 088 | Adjustment date: adjustment limits due to points &1 &2 or &3 &4 |
| 089 | &1: no adjustment since adjustment date cannot be determined |
| 090 | Adjustment date: chaining of index series performed |
| 091 | Adjustment date: adjustment limits due to percentages &1 &2 or &3 &4 |
| 092 | Index: Index points not found for chaining date &1 |
| 093 | Adjustment date: use of &1 percent until chaining &2 |
| 094 | Adjustment date: use of &1 points until chaining &2 |
| 095 | Condition already exists on calculated from-date &1 |
| 096 | Adjustment date: set to valid-from date &1 of adjustment run |
| 097 | Adjustment date: fixed with threshold &1 |
| 098 | Calculated from-date &1 is before previous from-date &2 |
| 099 | Adjustment date: calculated date &1 is after end date of object &2 |
| 100 | There is no rebasing entry &1/&2 after &3/&4 |
| 101 | Enter a valid-from date when subsequent conditions are considered |
| 102 | Subsequent condition: adjusted on &2 with &1 increase |
| 103 | Index: end of index for calculation &1 on &2 |
| 104 | Index: start of index for calculation &1 on &2 |
| 105 | Adjustment date: base date corrected to date of last index level &1 |
| 106 | Index: new unit price calculated until &1 |
| 107 | Enter a value |
| 108 | Enter only one value |
| 109 | &1: no adjustment, due to an error in calculation of control variables |
| 110 | Language-dependent variable name is the same for variables &1 and &2 |
| 111 | Variable &1 not found in control table (block:&2/row:&3) for rule &4 |
| 112 | Value transfer not possible due to difference in calculation formula |
| 113 | &1: enter comparative group of apartments |
| 114 | &1: comparative group of apartments &2/&3 does not exist |
| 115 | &1: assigned conditions do not reference rental objects |
| 116 | Minimum number (&1) of apartments in comparative group (&2) not met |
| 117 | Minimum number of apartments is not met |
| 118 | No value transfer since condition object is not a rental object |
| 119 | Value transfer to rental object &1 |
| 120 | Rounding: unit price of &1 rounded to &2 |
| 121 | Rounding: unit price difference of &1 rounded to &2 |
| 122 | Rounding: not able to determine condition amount for rounding |
| 123 | Rounding: condition amount of &1 rounded to &2 |
| 124 | Rounding: condition amount difference of &1 rounded to &2 |
| 125 | Rounding: condition amount converted to unit price &1 |
| 126 | No transfer since calculation formulas are different |
| 127 | &1: carryover condition type must differ from adjustment condition type |
| 128 | Carryover only possible if calculation formulas identical |
| 129 | &1: entering absolute price not allowed with carryover |
| 130 | Assign characteristic '&1' of '&2' only to a class ('&3' or '&4') |
| 131 | Assign characteristic '&1' of '&2' to class '&3' due to surcharge/reduct. |
| 132 | Surcharge/reduction &1 of &2 of class &3 without characteristic |
| 133 | Building age category &1 of &2 does not have successor |
| 134 | Building age category &1 of &2 does not have predecessor |
| 135 | Carryover only possible if frequency terms identical |
| 136 | Newly calculated unit price not allowed to be negative |
| 137 | Enter the complete comparative group of apartments |
| 138 | Correction: the calculated new unit price is the same as the old one |
| 139 | &1: adjustment condition type &2 not allowed to appear twice |
| 140 | &1: carryover condition type &2 not allowed to appear twice |
| 141 | &1: &2 use either as carryover condition type or adjustment cond. type |
| 142 | Unit price carried over from &1 to &2 |
| 143 | &1: no adjustment, since no BadI implementation executed |
| 144 | No suitable condition (&1) found for transfer |
| 145 | &1: &2 is not type &3 |
| 146 | Adjustment date: set to activation date &1 of measure |
| 147 | &1: &2 is not assigned to adjustment measure &3 |
| 148 | Adjustment could not be run without errors |
| 150 | Capping: not performed, since rental object adjustment |
| 151 | Capping: relative increase is maximum of &1% in &2 months |
| 152 | Capping: unit price of &1 capped at &2 |
| 153 | Capping: chargeable unit price &1, &2 months ago |
| 154 | Capping: chargeable unit price &1 on adjustment date &2 |
| 155 | Capping: &2 of possible spread &1 already used |
| 156 | Capping: relative increase is minimum of &1% in &2 months |
| 157 | Capping: unit price set to previous value &1 |
| 158 | Capping: unit price set to value &1 (minimum increase added) |
| 159 | Capping: &1% of this amount results in minimum increase of &2 |
| 160 | Capping: absolute condition amount increase is maximum of &1 in &2 months |
| 161 | Capping: chargeable condition amount &1, &2 months ago |
| 162 | Capping: chargeable condition amount &1 on adjustment date &2 |
| 163 | Capping: condition amount of &1 capped to &2 |
| 164 | Capping: unit price &1 was calculated on &2 (before capping) |
| 165 | Capping: not performed, since smaller capping already took place |
| 166 | Capping: absolute condition amount increase is minimum of &1 in &2 months |
| 167 | Capping: maximum increase using measurement type &1 not possible |
| 168 | Capping: absolute increase per measurement - maximum of &1 in &2 months |
| 169 | Capping: absolute increase per measurement - minimum of &1 in &2 months |
| 170 | Capping: unit price reduced by amount computed &1 to &2 |
| 171 | Capping: condition amount reduced by amount computed &1 to &2 |
| 172 | Capping: unit price before capping reduced by &1 to &2 |
| 173 | Capping: reduction not possible due to statistical computability |
| 174 | Capping: unit price after capping increased by &1 to &2 |
| 175 | Capping: unit price set to absolute upper limit &1 |
| 176 | Capping: unit price set to absolute lower limit &1 |
| 177 | Capping: amount of the resulting increase is &1 (= &2 - &3) |
| 178 | Capping: the resulting remaining margin is &1 |
| 179 | Capping: this exceeds the value &1 calculated using the method by &2 |
| 180 | Cancellation: unit price is increased by &1 from &2 to &3 |
| 181 | Cancellation: condition was canceled and replaced with &1 - &2 on &3 |
| 182 | Capping: the value &1 calculated using the method is thereby not reached |
| 183 | Capping: unit price for margin already used &3 (= &1 - &2) &4 months ago |
| 184 | Capping: calculation base for maximum margin is &1 (= &2 + &3) |
| 185 | Capping: &2 (= &3 - &4) of possible margin &1 was already used |
| 186 | Capping: maximum margin of increase for &2 months is &1 % |
| 187 | Capping: unit price for margin already used &1 (= &2 - &3) on &4 |
| 188 | Capping: unit price for margin already used &1 on &2 |
| 189 | Capping: result for current total rent including remaining margin is &1 |
| 190 | &1: no adjustment, since adjustment is locked (&2) |
| 191 | Capping: unit price is increased from &1 by &2 to &3 (capped) |
| 192 | Capping: unit price is increased from &1 by &2 to &3 |
| 193 | Capping: calculation base for maximum margin is &1 |
| 194 | Capping: unit price for margin already used &1, &2 months ago |
| 195 | Cancellation: condition was generated for &1 |
| 196 | Capping: At most one main condition type is allowed |
| 197 | &1: No adjustment since index is decreasing and only increases allowed |
| 198 | &1: No adjustment since index is increasing and only reductions allowed |
| 199 | Capping could not be performed |
| 200 | Rep.List of Rents: &2 not entered in basic data of rep.list of rents &1 |
| 201 | Rep.List of Rents: representative list of rents &1 still being used |
| 202 | Rep.List of Rents: from-value &1 has to be less than to-value &2 |
| 203 | Rep.List of Rents: mean value has to be between from and to value |
| 204 | Rep.List of Rents: from-value &1 has to be less than to-value &2 |
| 205 | Rep.List of Rents: &1 not entered |
| 206 | Rep.List of Rents: not possible to determine RO for condition &1 after &2 |
| 207 | Rep.List of Rents: not possible to determine building for &1 |
| 208 | Rep.List of Rents: not possible to determine rep. list of rents for &1 |
| 209 | Rep.List of Rents: not possible to determine fixt./fittings cat. for &1 |
| 210 | Rep.List of Rents: cannot determine location class for &1 |
| 211 | Rep.List of Rents: cannot determine building age category for &1 |
| 212 | Rep.List of Rents: cannot determine construction year for &1 |
| 213 | Rep.List of Rents: cannot determine the area for &1 |
| 214 | Rep.List of Rents: cannot determine the size class for &1 |
| 215 | Rep.List of Rents: cannot determine unique values for &1 |
| 216 | Rep.List of Rents: condition currency of &1 is not rep.rents list crcy |
| 217 | RLR: unit price calculated as &1 (area &2 * price/area &3) |
| 218 | Rep.List of Rents: unit price converts to &1 |
| 219 | Rep.List of Rents: no fixed amount rule found for conversion |
| 220 | Rep.List of Rents: increase per area of fixt/fitt.char. calculated for &1 |
| 221 | Rep.List of Rents: relative basis calculated for &1 |
| 222 | Rep.List of Rents: absolute increase calculated for &1 |
| 223 | Rep.List of Rents: total increase calculated for &1 |
| 224 | Rep.Rents List: new area rent calculated for &1 based on amenities value |
| 225 | Rep.List of Rents: new area rent calculated for &1 |
| 226 | Rep.List of Rents: point result for char.categ. &1 calculated for &2 |
| 227 | Rep.List of Rents: point result of table &1 calculated for &2 |
| 228 | Rep.List of Rents: absolute increase of fix/fitt.char. calculated for &1 |
| 229 | Rep.List of Rents: unit price increased by absolute increase &1 to &2 |
| 230 | Rep: List of Rents: value spread for interpolation of &1 is incorrect |
| 231 | Rep. List of Rents: point spread for interpolation of &1 is incorrect |
| 232 | Rep. List of Rents: value for interpolation of &1 is not in interval |
| 233 | Rep. List of Rents: base rent determined for &1 using method &2 |
| 234 | Have to assign basic rep. rents list &2 rather than rep. rents list &1 |
| 235 | Rep. List of Rents: dimension not entered, so values cannot be entered |
| 236 | Rep. List of Rents: incorrect fixtures/fittings on rental object |
| 237 | Rep. List of Rents: incorrect fixtures/fittings on building are ignored |
| 238 | RLR: fixture/fitting &1 capped at maximum value |
| 240 | Target for carryforward (&1) has inactive adjustment |
| 250 | Rep. List of Rents: there is more than one condition row in block &1 |
| 251 | Rep. List of Rents: the condition row is missing in block &1 |
| 252 | Rep. List of Rents: action row missing in block &1 |
| 253 | Rep. List of Rents: block &1 contains an incorrect formula |
| 254 | RLR: unkown results variable &2 used in block &1 |
| 255 | Rep. List of Rents: &1 - [&3] condition |
| 256 | Rep. List of Rents: &1 - [&3] condition (&4) |
| 257 | Rep. List of Rents: &1 - &2 = &3 |
| 258 | Rep. List of Rents: &1 - &2 = &3 (&4) |
| 259 | Rep. List of Rents: [&3] condition |
| 260 | Rep. List of Rents: [&3] condition (&4) |
| 261 | Rep. List of Rents: &2 = &3 |
| 262 | Rep. List of Rents: &2 = &3 (&4) |
| 280 | Size classes '&2' and '&3' of '&1' overlap |
| 297 | No price change for &1, since index decreasing and only increases allowed |
| 298 | No price change for &1 since index increasing and only reduction allowed |
| 300 | Control: variable with name &1 was not found |
| 301 | Control: variable with name &1 not allowed to be changed |
| 340 | Adjustment term with number &1 (&2 of &3 to &4) does not exist |
| 350 | Comparison: cannot determine rental object for condition &1 starting &2 |
| 351 | Comparison: new unit price calculated for &1 |
| 352 | Comparison: minimum number (&1) of comparative rents not met |
| 398 | Adjustment &2 exists for measure &1 |
| 400 | &1: no adjustment because no measure found |
| 401 | &1 of &2 determined from adjustment measure &3 |
| 402 | &1 per month &2 determined |
| 403 | &1 converted to &2 as specified in condition definition |
| 404 | New unit price set to &1 |
| 405 | New unit price of &1 is limited to &2 |
| 406 | Unit price is unchanged due to full waiver |
| 407 | Waiver condition generated with price &1 |
| 408 | Subsequent condition: adjusted on &2 with absolute increase &1 |
| 409 | The following cost efficiency analyses were considered |
| 410 | Enter at least one partial or additional cost efficiency analysis |
| 411 | &1 for period &2 with amount &3 |
| 412 | Adjustment date: base date is initial |
| 413 | System could not determine the adjustment method |
| 414 | Activation date of measure &1 before next possible adjustment date &2 |
| 415 | &1: using contract type &2 more than once is not allowed |
| 416 | &1: using usage type &2 more than once is not allowed |
| 417 | &1: when there is no limitation, only one parameter line required |
| 418 | Could not find a condition that can be adjusted |
| 419 | Transfer not possible because there are future conditions |
| 420 | Transfer possible only with same flow category (debit/credit) |
| 421 | Transfer of a gross condition |
| 422 | Capping condition was created with price &1 |
| 423 | Adjustment date: delayed until &1 due to adjustment direction entered |
| 424 | Capping: no valid condition found for &1 |
| 425 | Adjustment for &1 |
| 426 | Capping: condition type &1 is not assigned to adjustment reason &2 |
| 427 | Capping: before standard |
| 428 | Capping: after standard |
| 430 | Activities after adjustment activation for &1 |
| 431 | Activities after adjustment reversal for &1 |
| 432 | Adjustment activation failed for &1 due to follow-on activities |
| 433 | Adjustment reversal failed for &1 due to follow-on activities |
| 435 | Adjustment date: earliest corresponding adjustment direction (&1) |
| 436 | Adjustment date: calculated date not usable due to subsequent condition |
| 437 | Relative unit price change performed from &1% to &2 |
| 438 | No adjustment, due to error during calculation of index change |
| 439 | Adjustment date: modified valid-from &1 is not considered |
| 440 | Existing capping condition increased by &1 |
| 441 | Adjustment date: Calculated valid-from date &1 delayed to current date |
| 442 | Adjustment date: Calculated valid-from date &1 is in the past |
| 443 | Rent capping: condition amount will be increased by &2 from &1 to &3 |
| 444 | Capping: Ignored adjustments to amount of &1 through other procedures |
| 445 | Cap: Basis for margin consumption is unit price &1 &2 months ago |
| 446 | Cap: Basis for margin consumption is unit price &1 for &2 |
| 447 | Cap: Margin consumption &1 through adjustments to the main condition |
| 448 | Cap: Margin consumption &1 through countable adjustments |
| 449 | Cap: &2 of possible margin &1 has already been consumed |