RSDD - Nachrichtenklasse f�r Data Manager
The following messages are stored in message class RSDD: Nachrichtenklasse f�r Data Manager.
It is part of development package RSDD in software component BW-BEX-OT. This development package consists of objects that can be grouped under "BW: Data basis data manager".
It is part of development package RSDD in software component BW-BEX-OT. This development package consists of objects that can be grouped under "BW: Data basis data manager".
Message Nr ▲ | Message Text |
|---|---|
| 000 | <<<<<<<< Messages 000-099 reserved for maintenance of aggregates >>>>>>> |
| 001 | Activation of aggregate & was canceled (saving table) |
| 002 | Activation of aggregate & was canceled (activating table) |
| 003 | Activation of aggregate & was canceled (next table name) |
| 004 | Activation of aggregate & was canceled (too many tables) |
| 005 | No aggregate selected to be activated |
| 006 | Deactivation of the aggregates was terminated (not permitted) |
| 007 | Deactivation of the aggregate was terminated (unknown error) |
| 008 | Error when filling aggregate & |
| 009 | Aggregate & to be filled is not empty |
| 010 | Change run is running or has been terminated. No roll-up possible |
| 011 | Roll-up running for InfoCube & |
| 012 | Error during activation of the aggregate "&1" (InfoCube &2) |
| 013 | Change run is running or has been terminated. Activation not possible. |
| 014 | Roll-up is running or has been terminated. It is not possible to fill. |
| 015 | Deactivation of the aggregates was successful |
| 016 | Aggregate & is not active |
| 017 | Aggregate & does not contain any data |
| 018 | Request ID must equal & |
| 019 | Select at least one suitable aggregate |
| 020 | No aggregates could be summarized for optimization |
| 021 | No aggregates are available for optimization |
| 022 | No aggregates that can be displayed are available |
| 023 | The display of aggregates cannot be started |
| 024 | As master data is loaded for &, no change run is possible |
| 025 | Aggregate contains an unknown hierarchy for & |
| 026 | Characteristic & is inconsistent |
| 027 | Roll-up not necessary. InfoCube data is already rolled up completely |
| 028 | Editing of aggregate &1; background job &2; start time &3 |
| 029 | Error when structuring the index of aggregate & for InfoCube & |
| 030 | Error when saving aggregate &1 (&2) in table RSDDAGGRDIR |
| 031 | Error when saving component &3 of aggregate &1, version &2 |
| 032 | Error when saving texts, aggregate &1, language &2, version &3 |
| 033 | Definition of aggregate &1 is invalid and will not be saved |
| 034 | Aggregate &1 could not be saved on a transport order |
| 035 | InfoCube &1 not available in version &2 |
| 036 | Not all InfoCube &1 aggregates can be edited |
| 037 | Editing InfoCube &1 aggregate was interrupted |
| 038 | Aggregate &1 could not be copied in the delivery version |
| 039 | Aggregate &1 is not available in the database in version &2 |
| 040 | InfoCube for aggregate '&1' in version &2 could not be found |
| 041 | You are not authorized to maintain InfoCube &1 aggregate |
| 042 | No aggregates can be created for InfoCube &1 |
| 043 | Aggregate &1 from InfoCube &2 replaced during installation |
| 044 | Agregate &1 locked by Change and Transport Organizer |
| 045 | Aggregate &1 could not be saved in an order |
| 046 | Copying aggregates from version &1 to &2 is not supported |
| 047 | Aggregate &1 (&2): Entry could not be read in table &3 |
| 048 | Aggregate &1 (&2): Entry could not be written to table &3 |
| 049 | You are not authorized to activate the aggregates |
| 050 | Content Version (D) of aggregate &1 was sucessfully transferred |
| 051 | No aggregates for Infocube &1 activated and filled |
| 052 | No aggregates for InfoCube &1 can be proposed |
| 053 | Aggregate &1 is not filled and cannot therefore be switched off |
| 054 | Error in aggregate &1: the hierarchy &2 is not complete |
| 055 | Change run is not possible, because aggregates are being filled |
| 056 | Object version &2 for aggregate &1 invalid |
| 057 | Specify a name for the aggregate |
| 058 | Transport connection for aggregate &1 terminated. No change possiblie |
| 059 | Cannot create aggregates for InfoCube &1 type &2 |
| 060 | Activate the aggregates that you want to transport |
| 061 | The aggregate tablespace &1 (InfoCube &2) could not be saved |
| 062 | There is no active version of aggregate '&' |
| 063 | There is no SAP version of aggregate '&' |
| 064 | Number range of dimension & in aggregate & cannot be buffered |
| 065 | Cannot create an interval for number range & |
| 066 | Neither hierarchies nor master data are to be activated in the change run |
| 067 | The requests from &1 to &2 of InfoCube &3 do not contain data |
| 068 | Starting process type &1 with &2 objects... |
| 069 | Request SID must be smaller than or equal to & |
| 070 | The date &1 is invalid. Enter a valid date. |
| 071 | The date format of &1 is invalid. Use a valid date. |
| 072 | The time &1 is invalid. Enter a valid time |
| 073 | The time format of &1 is invalid. Use a valid one. |
| 074 | No aggregate can be adapted |
| 075 | Master data of characteristic &1 activated in &2 seconds |
| 076 | Hierarchy &1 of characteristic &2 activated in &3 seconds |
| 077 | Activation of the hierarchy &1 in main process |
| 078 | Activation of master data for &1 |
| 079 | Editing of aggregate &1 in main process |
| 080 | Restarting change run. Original entries are used. |
| 081 | Master data extractor running. Change run not possible |
| 082 | Rollup for InfoCube & terminated |
| 083 | Direct activation not possible. Use change run |
| 084 | Restart not possible because there is more than one change run |
| 085 | Some characteristics/hierarchies already locked in other change runs |
| 086 | The InfoCube &1 is already locked in other change runs |
| 087 | Activation of the hierarchy &1 |
| 088 | Characteristic &1 in change run &2 (Start time: &3; User: &4) |
| 089 | Hierarchy &1 in change run &2 (Start time: &3; User: &4) |
| 090 | Characteristic &1 is not active. Activate char. before alignment run |
| 091 | The indices from aggregate &1 must be checked |
| 092 | Aggregate &1 must be deactivated prior to activation |
| 093 | Time-dependent components are evaluated for the current key date |
| 094 | Variable &1 must return a unique value |
| 095 | Activate variable &1 from the content |
| 096 | Variable &1 for the key date of aggregate &2 does not exist |
| 097 | Variable &1 is not allowed as key date for aggregate &2 |
| 098 | Time change run terminated -> see application log |
| 099 | Invalid program status with maintenance of the aggregates |
| 100 | <<<<<<<<< Messages 100-199 reserved for formation of aggregates >>>>>>>> |
| 101 | Error when deleting the data from aggregate & |
| 102 | Aggregate &1 / &2 is not available |
| 103 | Interval for number range RSDDAGCUBE does not exist |
| 104 | Error "&1" in row &2 of the generated program |
| 105 | Only select one aggregate |
| 106 | Aggregate &1 not partitioned because it does not contain charac. &2 |
| 107 | Statistic UID of the aggregate process: '&1' (RSDDSTATAGGR) |
| 108 | Request &1 does not exist in InfoCube &2 |
| 110 | Breakpoint for debugging was activated |
| 111 | Aggregate &1 is condensed to 0REQUID <= &2 and 0CNSID <= &3 |
| 112 | Aggregate &1(&2) is being filled |
| 113 | Aggregate &1(&2) is rolled up to &3 |
| 114 | Aggregate &1(&2) is being adapted / rebuilt |
| 115 | &1 aggregates are condensed |
| 116 | Hierarchy &1 is not included in change run |
| 117 | Characteristic &1 is not included in change run |
| 118 | Restarting canceled change run with ID &1... |
| 120 | Aggregate &1 rebuilt in &2 seconds |
| 121 | Aggregate &1 rolled up in &2 seconds |
| 122 | Aggregate &1 adjusted in &2 seconds in the Change Run |
| 123 | Aggregate &1 adjusted in &2 seconds when deleting data |
| 124 | Attribute &1 for basic characteristic &2: &3 changes |
| 125 | Hierarchy &1 for characteristic &2: &3 changes in level &4 |
| 126 | Error in aggregate table for InfoCube &1 |
| 127 | Error with truncate from table &1 |
| 128 | Rollup for InfoCube &1 not possible. There are no aggregates |
| 130 | The &3 table from the source was divided into &2 blocks with char. &1 |
| 131 | Characteristics and hierarchies affected by change run |
| 132 | &1 aggregates will be adjusted |
| 133 | BWA indexes will be adjusted |
| 134 | Master data of &1 characteristics and &2 hierarchies will be activated |
| 135 | Aggregates will be checked |
| 136 | ID for change run: &1 |
| 140 | Aggregate &1: Preperations for filling |
| 141 | &1 minutes waiting time was required for locks |
| 142 | Aggregate &1: Read: Block characteristic &2 range: &3 - &4 |
| 143 | Aggregate &1: Read (&2) from table &3 (max &4 records) |
| 144 | Aggregate &1: Write (&2) (&3 records) |
| 145 | Aggregate &1: Read from &2 and write directly to the database |
| 146 | Aggregate &1: Repair indexes |
| 147 | Aggregate &1: Analyze database tables |
| 148 | Error while writing to the fact table. Data save in &1 |
| 199 | Invalid program status with the update of the aggregates |
| 200 | <<<<< Messages 200-299 reserved for data manager read interfaces >>>> |
| 201 | InfoProvider contains too many characteristics; make a preselection |
| 202 | Specify a report name |
| 203 | Select at least one characteristic or one key figure |
| 299 | Invalid program status in data manager - read interface |
| 300 | <<<< Messages 300-399 reserved for aggregates, general messages >>> |
| 301 | Reading from aggregate &3 not possible due to block by user &1 |
| 302 | Writing to aggregate &3 not possible due to block by user &1 |
| 303 | Maintenance of aggregate &3 not possible due to block by user &1 |
| 304 | Creation of aggregates for InfoCube & not possible. |
| 305 | The RFC group &1 can have a maximum of &2 work processes |
| 306 | Replacing variable &1 with value &2 (InfoCube = &3) |
| 310 | Aggregate &1, version &2 could not be deleted (error &3) |
| 311 | No SID for fixed value '&3', InfoObject '&2' for aggregate '&1' (&4) |
| 312 | No SID for hierarchy '&3', InfoObject '&2' of aggregate '&1' (&4) |
| 313 | Hierarchy &1 of InfoObject &2 (aggregate &3) does not exist |
| 314 | Aggregation level "*" has been set for char. '&1' (aggregate '&3') |
| 315 | Hierarchy '&1' (characteristic &2; aggr. '&3') is not stored generically |
| 316 | Error while indexing hierarchy &1 |
| 350 | Activation of hierarchy &1; background job &2; start time &3 |
| 351 | Activation of master data of &1; background job &2; start time &3 |
| 352 | Activation of master data of &1 in main process |
| 353 | Error while processing aggregate &1 |
| 354 | Error while activating characteristic &1 |
| 355 | Error while activating hierarchy &1 (&2) |
| 400 | '&2': No hierarchy, level or value may be entered for &1 |
| 401 | '&2': You have to specify a hierarchy and a level for characteristic &1 |
| 402 | '&2': No value may be specified for characteristic &1 |
| 403 | '&2': You have to specify a value for characteristic &1 |
| 404 | '&2': Do not specify a hierarchy or a level for characteristic &1 |
| 405 | Aggregate ID & has already been entered for this InfoCube. |
| 406 | Active version maintenance not allowed. Display only |
| 407 | Aggregate &1 was successfully created as AggregateCube &2 |
| 408 | Save your entries before activation |
| 409 | Maintenance not possible as SE16 maintenance is allowed |
| 410 | '&2': Characteristic &1 must have aggregation level '*' or 'F' |
| 411 | No hierarchy found for the InfoObject |
| 412 | '&3': Compound characteristic &1 must also have aggregation level &2 |
| 413 | '&2': Characteristic &1 contains fixed values that are not allowed |
| 414 | '&2': No hierarchy allowed for InfoObject &1 |
| 415 | Aggregation using time-dependent hierarchy &3 is not allowed (&1, &2) |
| 416 | Have to summarize using time-dependent attribute '&1' in '&2' |
| 417 | Hierarchy name is incorrect. |
| 418 | Error when compiling the hierarchy ID. |
| 419 | Error When Checking Aggregate & |
| 420 | '&3': Key figure &1 requires '*' for characteristic &2 |
| 421 | '&3': Aggregation level '%' is not allowed for characteristic &1 |
| 422 | '&3':Aggregation level '&1' for characteristic '&2', aggregate is invalid |
| 423 | '&3': Specify aggregation level '*' for characteristic &1 or attribute &2 |
| 424 | Check of aggregate & without errors and warnings |
| 425 | Aggregates successfully saved. |
| 426 | '&3': '&2' cannot be in aggregate because of characteristic '&1' |
| 427 | Aggregate name & already exists. Please select another. |
| 428 | No F4 help available |
| 429 | '&2': InfoCube '&1' contains non-cumulatives: Time char &3 not summarized |
| 430 | '&2': InfoCube '&1 contains non-cumulatives: Ref. char. &3 not summarized |
| 431 | '&2': Line item '&1' is used in aggregate |
| 432 | '&2': Hierarchy level '&3' for characteristic '&1' is greater than '&4' |
| 433 | '&3': Characteristic '&2' also transferred as compounded with '&1' |
| 434 | '&3': Chara. '&2' transferred because of exception aggregation for '&1' |
| 435 | '&1': Aggregate is defined correctly |
| 436 | '&3': InfoCube &1 contains non-cumulatives: Time characteristic &2 added |
| 437 | '&3': InfoCube &1 contains non-cumulatives: Time characteristic &2 added |
| 438 | '&1': Aggregate has a variable key date. Schedule process "&2" |
| 439 | '&1': Aggregate has a variable key date. Activate process chain '&2'. |
| 440 | '&1': The variable for the filled aggregate cannot be changed |
| 441 | '&2': Aggregation level for '&1' set as '*', as specified in InfoCube |
| 442 | '&2': Characteristic &1 already specified in InfoCube |
| 443 | Compounded characteristic &1 set to fixed value &2 |
| 444 | '&1': Definition for aggregate is empty. It cannot be activated |
| 445 | '&2': InfoCube '&1' contains non-cumulatives: Time char. '&3' is finest |
| 446 | '&1': Rough time characteristics included in aggregate definition |
| 447 | '&1': Set to inactive for technical reasons. Changes are not possible |
| 448 | Update for buffer invalidation failed for InfoCube &1 |
| 449 | Error occurred checking characteristic '&1' in aggregate '&2' |
| 450 | '&2': Characteristic '&1' deleted as it no longer exists in InfoCube |
| 451 | Definitions of aggregate &1 and aggregate &2 are identical |
| 452 | '&2':InfoCube '&1' contains non-cumulatives: Char.'&3' is not in the Cube |
| 453 | '&2': Characteristic '&1' automatically included in definition |
| 454 | Attribute &1 is not permitted in aggregate because char. supports RDA |
| 455 | '&1': Index missing. 'Set Active' is only possible with transaction RSRV |
| 500 | Settings for BW statistics saved successfully |
| 501 | No data from the BW statistics could be read |
| 502 | Cannot determine new proposals for aggregates |
| 503 | First activate the recording of BW statistics for InfoCube &1 |
| 504 | Use the InfoSources for BW statisitcs 2.0 |
| 505 | For user '&1', logging of the query statistics is to be activated |
| 506 | Data deleted successfully from tables |
| 550 | <<<< Messages 550-599 reserved for CUBE-WRITER >>> |
| 551 | Time of provider &1 is inconsistent. Loading not possible. |
| 552 | Error &1 while reading data-state information for provider &2 |
| 600 | <<<< Messages 600-699 reserved for general error messages >>> |
| 601 | Function module & no longer exists, please use & |
| 602 | Number range &1 for InfoCube &2 was increased to &3 |
| 603 | Number range of P dimension for aggregate &2 was set to &1 |
| 604 | Number range object &1 was deleted |
| 612 | Successfully finished converting InfoCube &1 |
| 614 | New SID entry for InfoObject &1 with value &2 created |
| 619 | Error when writing to the application log |
| 620 | &1 &2 &3 &4 |
| 623 | Starting to convert ODS &1 |
| 624 | Successfully finished converting ODS &1 |
| 628 | ----------------- &1 &2 &3 -------------- |
| 629 | Key figure &1 does not have the aggregation 'SUM' |
| 700 | <<<< Messages 700-799 reserved for aggregate construction msgs (KN) >>> |
| 701 | Log for selecting source aggregate for aggregate &1 or query: |
| 702 | __Aggregate &1 can be used as a source aggregate |
| 703 | __Aggregate &1 cannot be used as a source aggregate |
| 704 | __Aggregate &1 is better/smaller than the previous "best" |
| 705 | __Aggregate &1 is not better than the previous "best" |
| 706 | __No suitable aggregate found. Use InfoCube |
| 707 | ____The subnodes cannot be used |
| 708 | ====> Source aggregate is &1 |
| 709 | End of source aggregate selection |
| 710 | ____More characteristics compressed than the aggregate/query |
| 711 | ____Characteristic &3 is compressed but is not in the aggregate/query |
| 712 | ____Key date for time-dependent attribute &3 is incorrect |
| 713 | ____Characteristic/attribute &3 does not have aggregation level */% |
| 714 | ____Characteristic/attribute &3 has incorrect fixed value / hier. nodes |
| 715 | ____Characteristic/attribute &3 has a fixed value |
| 716 | ____Characteristic/attribute &3 has an incorrect hierarchy or level |
| 717 | ____Characteristic/attribute &3 has a fixed value, no compression |
| 718 | ____Characteristic/attribute &3 has a node level, no compression |
| 719 | For aggregate &1: |
| 720 | &2 table: block characteristic &3, number of blocks: &4 |
| 721 | Block &1: From SID &2 to SID &3 (with ChangeID = &4) |
| 722 | Delta attribute changes for &2 (source &1), read &3, wrote &4 |
| 723 | Delta hierarchy changes for &2 (source &1), read &3, wrote &4 |
| 724 | Block &1: Same SID &2 (with ChangeID = &4) |
| 725 | Condensing of aggregate &1 is terminated |
| 726 | Condensation of aggregate &1 (process &2, time stamp &3) |
| 727 | Checking of aggregate &1 (process &2, time stamp &3) |
| 728 | Changes run for InfoCube &1 (process &2, time stamp &3) |
| 729 | Aggregate &1 is not active and filled |
| 730 | Aggregate &1: No records for DIMID &2 in P dim. -> DIMID was deleted |
| 731 | Aggregate &1: Partition &2 is empty --> partition deleted |
| 732 | Fragmentation expression for table &1 cannot be interpreted |
| 733 | Notification from form routine &1 in &2 |
| 734 | Dbspace: &1 expr: &2 |
| 735 | Parameter &1 is set: Fragmented aggregate structure deactivated |
| 736 | Table &1 is not in the database system catalog |
| 737 | Aggregate is structured by fragment |
| 740 | Roll up to/ compress to/ automatic compression: &1/ &2/ &3 |
| 741 | Read table '&4' (size: '&3'), BLOCKSIZE=&1 ===> block characteristic '&2' |
| 742 | Block '&3': '&1' (block size '&2') |
| 743 | Source for the aggregate structure: InfoCube/aggregate '&1' |
| 744 | The aggregate is 'flat', that is, it has less than 14 characteristics |
| 745 | Log for analyzing aggregate '&2 (technical name '&1')' |
| 746 | The block characteristic is NOT in the aggregate. Performance warning |
| 747 | Options "Display SQL Statement" and "Display Execution Plan" not possible |
| 748 | Choose only one aggregate |
| 749 | Entry for parameter not valid. Default value will be used |
| 750 | Temporary realignment run table '&1' was deleted |
| 751 | A cancelled or active realignment run is blocking this action |
| 752 | You can delete temporary realignment table '&1' |
| 799 | <<<< Messages 800-899 reserved for aggregate error messages >>> |
| 800 | Aggregate &1 successfully checked |
| 801 | Aggregate &1 not found |
| 802 | Aggregate &1 is empty |
| 803 | Check mode '&2' not possible for aggregate '&1' (reason: '&3') |
| 804 | Check for aggregate &1 terminated unexpectedly |
| 805 | Enter an InfoCube name |
| 806 | The check with the ID '&1' does not exist |
| 807 | No checks created for InfoCube '&1' |
| 808 | InfoCube '&1' does not exist |
| 809 | No checks with check time 'S' available for CheckID '&1('&2')' |
| 810 | Aggregate &1: Char &2 has type 'DPA' |
| 811 | Aggregate &1: Char &2 has type 'UNI' |
| 812 | Aggregate &1: Char./nav. attribute &2 has an incorrect aggregation status |
| 813 | Aggregate &1: Characteristic/navigation attr. &2 no longer in InfoCube |
| 814 | Unneeded check aggregates will be deleted |
| 815 | Check of aggregate &1 in mode '&2' started |
| 816 | Aggregates are only in display mode. Maintenance not possible |
| 817 | Hierarchy not unique. Check aggregate not possible |
| 818 | Only choose one aggregate |
| 819 | Check aggregate does not exist. Needs to be created |
| 820 | There is already a check with ID '&2' for InfoCube '&1' |
| 821 | No authorization to perform this action |
| 822 | Interruption: Log contains the more detailed error description |
| 823 | Starting to convert ODS &1 |
| 824 | Successfully finished converting PSA &1 |
| 825 | Scheduling cancelled by user |
| 826 | Error when processing in the background with order: &1 |
| 827 | Job &1 scheduled successfully |
| 828 | ------------------ &1 &2 &3 ------------------ |
| 829 | Key figure &1 does not have the aggregation 'SUM' |
| 830 | Start: Convert key figures with fixed currency |
| 831 | End: Convert key figures with fixed currency |
| 832 | Error occurred when converting cube &1 (SQL error: &2) |
| 833 | Error occurred when changing the fixed currency for object &1 |
| 834 | Start: Convert normal key figures |
| 835 | End: Convert normal key figures |
| 836 | Table &1 contains several entries with an identical key |
| 837 | Successfully finished converting ODS &1 (&2) |
| 880 | Errors while reading InfoProvider data |
| 881 | &1 &2 &3 &4 |
| 882 | Repartitioning request for InfoCube &1 was reset |
| 883 | A repartitioning request already created for InfoCube &1 |
| 884 | A new repartitioning request created for InfoCube &1 |
| 885 | Repartitioning request for InfoCube &1 was started in the batch |
| 886 | New value for the upper partition is less than or equal to current value |
| 887 | New value for the lower partition is less than or equal to current value |
| 888 | No repartitioning request was created for InfoCube &1 |
| 889 | A repartitioning request is already being processed for InfoCube &1 |
| 890 | No MERGE repartitioning request was created for InfoCube &1 |
| 891 | No EXTEND repartitioning request was created for InfoCube &1 |
| 892 | A MERGE repartitioning request was created for InfoCube &1 |
| 893 | An EXTEND repartitioning request was created for InfoCube &1 |
| 894 | The input parameter do not match the expected values |
| 895 | No metadata could be found for InfoCube &1 |