RSDMD -
The following messages are stored in message class RSDMD: .
It is part of development package RSDMD in software component BW-WHM-DBA. This development package consists of objects that can be grouped under "Master Data Update".
It is part of development package RSDMD in software component BW-WHM-DBA. This development package consists of objects that can be grouped under "Master Data Update".
Message Nr ▲ | Message Text |
|---|---|
| 000 | System has internally recognized an inconsistant status |
| 001 | & & & & |
| 002 | ************************************************************************* |
| 003 | The master data for characteristic & is already active |
| 004 | There is no competing fixed value for characteristic &1 |
| 005 | Characteristic &1: NAV attribute &2 cannot be activated due to key change |
| 006 | Enter the object and subobject for the log |
| 010 | Cannot delete old master data for HANADB |
| 011 | Deletion of old master data is not necessary in this release |
| 012 | Cannot enable array insert; DB views missing for InfoObject &1 |
| 029 | Only basic characteristics are allowed for transformation sources |
| 030 | Only basic characteristics are allowed for transformation targets |
| 031 | Only basic characteristics are allowed as DTP targets |
| 032 | Transformation for InfoObject source without MD not allowed |
| 033 | InfoObject &1 uses enhanced MD update for attribute and text update |
| 034 | Usage of I_WRITE_A_RECORDS_ONLY = X not allowed if modified MD exists |
| 035 | Modified MD is not allowed if InfoObject is RSPM migrated |
| 036 | Inconsistent time intervals for attributes detected |
| 037 | Inconsistent time intervals for texts detected |
| 038 | Characteristic &1 is only partially RSPM migrated |
| 050 | No time overlaps at request &1 in &2 |
| 051 | Time overlap with request &1 (start &2, end &3) |
| 052 | No time overlaps in &1 |
| 053 | Check request &1 (start &2, end &3) |
| 054 | Error while getting navigation attributes of characteristic &1 |
| 055 | Error while getting usage of characteristic &1 |
| 056 | No time overlap with request &1 (start &2, end &3) |
| 057 | Check &1 |
| 058 | No requests available |
| 059 | Check time overlaps in master data requests |
| 060 | No objects available |
| 061 | Characteristic &1 not found |
| 062 | &1 is not a basic characteristic (use &2 instead) |
| 070 | Master data table for XXL attributes for IOBJ &1 has not been generated |
| 071 | XXL attributes updated |
| 072 | Error detected in substep &1 |
| 073 | Maintain semantic grouping in the DTP to enable correct extraction |
| 074 | InfoObject &1 does not contain any XXL attributes |
| 075 | &1 duplicate XXL attributes deleted |
| 076 | InfoObject &1 does not contain XXL attribute &2 |
| 094 | Attributes updated |
| 095 | Master data will be deleted after SID table entries have been received |
| 096 | Saving texts for characteristic & prevents the deletion of master data |
| 097 | Saving master data for charact. & prevents the deletion of master data |
| 098 | Changing char. values for char. & prevents the deletion of master data |
| 099 | Loading texts for characteristic & prevents the deletion of master data |
| 100 | An import parameter was not transferred |
| 101 | Error while calling RSD_IOBJ_GET for InfoObject & |
| 102 | Error while accessing lock table RSDMDENQ |
| 103 | Error while determining the master data routines for characteristic & |
| 104 | Unprocessed new records in table & |
| 105 | You cannot delete master data |
| 106 | No master data for characteristic & |
| 107 | You can delete 1 of & entries |
| 108 | & entries deleted from the database |
| 109 | Master data cannot be defined for & |
| 110 | Could not perform SID pull for existing attribute values |
| 111 | Display mode; master data table or text table is already locked |
| 112 | Not all master data can be deleted |
| 113 | Master data cannot be deleted during a change run |
| 114 | Master data is deleted in the background |
| 115 | Master data with SID & deleted |
| 116 | Master data with SID & not deleted |
| 117 | Error in the where-used list |
| 118 | Error when deleting master data |
| 119 | Master data table, or text table, is already locked. |
| 120 | Incorrect call up of the module |
| 121 | Error in InfoObject & |
| 122 | Error when converting the SID |
| 123 | Error when generating a program |
| 124 | &2 entries out of &1 can be deleted |
| 125 | There is no SID for characteristic value &. |
| 126 | Master data &1 (SID &2) is used in &3 and, therefore, not deleted. |
| 127 | All entered data deleted |
| 128 | Not all master data could be deleted |
| 129 | No master data deleted |
| 130 | Inconsistent status of InfoObject &. |
| 131 | This characteristic does not have a master data table |
| 132 | Master data table for this characteristic has not been generated |
| 133 | None of the characteristic values are available in the master data table |
| 134 | Not all characteristic values are available in the master data table |
| 135 | Text with char. value & deleted |
| 136 | Master data cannot be deleted since master/trans. data is being loaded. |
| 137 | Master data extract. for chara. & does not allow deletion of master data |
| 138 | Master data/text of characteristic & already deleted |
| 139 | Loading data target & prohibits deletion of master data |
| 140 | *** 140 - 199 reserved for master data update (attributes and texts) *** |
| 141 | & & & & |
| 142 | Data to be updated is & & |
| 143 | The following InfoObjects are checked for permitted characters |
| 144 | The data to be updated is check for duplicate data records |
| 145 | The data to be updated is checked for overlapping time intervals |
| 146 | Time overlap of data record &1&2 DATETO=&3 DATEFROM=&4 |
| 147 | with data record &1&2 DATETO=&3 DATEFROM=&4 |
| 148 | Duplicate data record with key &1&2 found |
| 149 | Data record &: Invalid character(s) in '&' (InfoObject &) |
| 150 | Data record &1&2 has an invalid time interval DATETO=&3 DATEFROM=&4 |
| 151 | Data record &: Language key is blank. |
| 152 | Updating data packet & |
| 153 | Error log was written - log can be displayed in the monitor |
| 154 | => Start of the subsequent processing for master data update |
| 155 | <= End of the subsequent processing for master data update |
| 156 | No master data update possible during a change run |
| 157 | & data records deleted in table & |
| 158 | & data records in table & marked for deletion |
| 159 | & data records changed in table & |
| 160 | & data records inserted in table & |
| 161 | No database operations necessary, data unchanged |
| 162 | Different database operations were executed |
| 163 | Characteristic & does not have the required master data tables |
| 164 | Master data for charcteristic & can not be repaired |
| 165 | Action took & microseconds |
| 166 | The repair for characteristic &1 could not be carried out |
| 167 | Checking master data values for the following InfoObjects |
| 168 | Following error occurred in data record no. & |
| 169 | This data cannot be analyzed |
| 170 | No duplicated data records or time overlappings found |
| 171 | Characteristic & is not active. You must activate the characteristic. |
| 172 | No master data maintenance possible for characteristic & |
| 173 | No master data update possible for object & |
| 174 | User &2 locked the load of master datas for characteristic &1 |
| 175 | User &2 locked the load of master datas for characteristic &1 |
| 176 | User &2 locked the load of texts for characteristic &1 |
| 177 | User &2 locked the load of texts for characteristic &1 |
| 178 | Master data version &3 of characteristic &1 locked by user &2 |
| 179 | &1% sorted out when handing duplicate data records |
| 180 | The display attributes for object & cannot be activated |
| 181 | & is not a time-independent display attribute of characteristic & |
| 182 | The master data of characteristic & was activated |
| 183 | A Master Data Delete process has not yet ended. Lock could not be set. |
| 184 | &1: Data record &2 ('&3'): Version '&4' does not exist |
| 185 | &1 : Data record &2 ('&3') : Version '&4' contains invalid characters |
| 186 | &1 : Data record &2 ('&3') : Language key is initial |
| 187 | &1 : Data record &2 ('&3') : Invalid "from" date '&4' |
| 188 | &1 : Data record &2 ('&3') : Invalid "to" date '&4' |
| 189 | &1 : Data record &2 ('&3') : Invalid time interval '&4'[from/to] |
| 190 | &1 : Time overlapping of data record &2 with &3 : '&4'[to/from] |
| 191 | &1 : Data record &2 ('&3') : Duplicate data record |
| 192 | &1 : Data record &2 ('&3') : '&4' [from/to] not in selection interval |
| 193 | &1 :Data record &2 ('&3'):Does not correspond to selection '&4' [from/to] |
| 194 | &1: Data record &2 ('&3'): Version '&4' is not valid |
| 195 | &1 of &2 data records inserted into table &3 (single record insert) |
| 196 | Table &1: Data record already exists for specification/SID '&2' |
| 197 | Test for characteristic &1 does not make sense (see long text) |
| 198 | Error when specifying basic characteristic for characteristic &1 |
| 199 | &1 duplicate records found, &2 records inserted in table &3 |
| 200 | Messages for the master data tables check (200-299) |
| 201 | The following checks are carried out |
| 202 | Check initial entries |
| 203 | Check consistency using SID(&1), P(&2) and Q table (&3) |
| 204 | Check for duplicated entries in P table &1 |
| 205 | Check for dupicated entries in X table &1 |
| 206 | Check for overlapping time intervals in Q table &1 |
| 207 | Check for overlapping time intervals in Y table &1 |
| 208 | Check consistency from X(&1) to P(&2) and Y(&3) to Q(&4) |
| 209 | Check for invalid subversion combinations |
| 210 | Check for invalid versions |
| 211 | Check for existence of navigation attribute values |
| 212 | No master data XXL attribute update possible for object & |
| 213 | Master data table for XXL attributes is already locked |
| 214 | Number of deleted XXL records: &1 |
| 215 | Number of modified XXL records: &1 |
| 216 | XXL record &1 has illegal assignment of values |
| 217 | Record '&1' written to &2 at second attempt |
| 218 | Unable to write record '&1' to &2 at second attempt |
| 220 | Missing initial entry in table &1 |
| 221 | &1 characteristic values exist in SID, P and Q tables |
| 222 | &1 different characteristic values exist in table &2 |
| 223 | Feature '&1' does not exist in all tables (SID,P,Q) |
| 224 | Feature '&1' is present more than once in table &2 |
| 225 | Feature '&1' exists in table &2 with temporal overlap |
| 226 | In table &2, feature '&1' is not consistent with table &3 |
| 227 | Invalid version OBJVERS = '&1' and CHANGED = '&2' in tables (SID,P,Q) |
| 228 | Nav. attr. &1 does not exist in feature '&2' in &3 table from &1 |
| 230 | New check of master data tables (230-299) |
| 231 | Charac. &1 : Master data check version A/D. Does not exist in M/I (&2) |
| 232 | Charac. &1 : Master data check in version A/' ' and M/I (&2) |
| 233 | Characteristic & : Consistency check between P and X, Q and Y tables |
| 234 | Characteristic & : Check if initial entries exist in master data tables |
| 235 | Characteristic & : Validity check of initial value of master data attrib. |
| 236 | Characteristic & : Validity check of object versions |
| 237 | Characteristic & : Check for all values existing in P, Q and SID tables |
| 238 | Characteristic & : Check if values exist for navigation attributes |
| 239 | Characteristic & : Checking all T-table values for existence in SID table |
| 240 | Characteristic &: Checking consistency of time intervals in Q table |
| 241 | Characteristic &: Checking all SID values in the X and Y table |
| 242 | Characteristic &1: SID value &2 not available in &3 table |
| 243 | Characteristic &1: For SID value &2, keys do not match in &3 and &4 table |
| 244 | Characteristic &1: SID value &2 exists in &3 but not in &4 table |
| 246 | SID value &1 of attribute &2 does not match CHAVL value in &3 table |
| 250 | Characteristic & : Error when generating check program with template & |
| 251 | Characteristic & : Missing initial entry in table & |
| 252 | Characteristic & : Initial entry exists in table & |
| 253 | Characteristic & : Repairs to the reported error failed |
| 254 | Characteristic & : Reported error was successfully corrected |
| 255 | Characteristic & : Incorrect object versions in table & |
| 256 | Characteristic & : Object versions in table & are correct |
| 257 | Characteristic & : Cannot repair reported error |
| 258 | Characteristic & : Cannot check this object |
| 259 | Characteristic & : Following versions are incorrect: (Display max. 50) |
| 260 | Characteristic & : No errors found in this test |
| 261 | Characteristic & : No repairs required. No errors occurred |
| 262 | Characteristic & : Check attribute & |
| 263 | Characteristic & : & data records were incorrect |
| 264 | Characteristic & : Reconstruction of X or Y table failed |
| 265 | Characteristic & : X or Y table was successfully constructed |
| 266 | Characteristic & : Tables &, & are not consistent: & deviation(s) |
| 267 | Characteristic &: & values from table & do not exist in table & |
| 268 | Characteristic &: Errors found during this test |
| 269 | Characteristic &: Chain of active intervals: & gaps (show max. 50): |
| 270 | Characteristic &: Chain of active intervals: & overlapping (show max. 25) |
| 271 | Characteristic &: Chain of changed intervals: & gaps (show max. 50): |
| 272 | Char. &: Chain of changed intervals: & overlapping (show max. 25): |
| 273 | Characteristic &: & errors could be successfully repaired |
| 274 | Characteristic &: Checking table & |
| 275 | Characteristic &: Checking consistency between tables & and & |
| 276 | Characteristic &: Checking SID values for characteristic/attribute & |
| 277 | Characteristic &: Following data records have errors (max 50 displayed): |
| 278 | |
| 279 | Characteristic &1: Invalid initial record in table &2 |
| 280 | UUID charact. &1: Duplicate external key &2 of record &3 in package |
| 281 | UUID charact. &1: Duplicate external key &2 in record &3 in database |
| 282 | INSERT-ONLY Flag ON and duplicate records found in table &1. |
| 290 | Delta handling for record &1, field '&2': Value modified from &3 to &4 |
| 291 | Delta handling: Record &1 merged into record &2 |
| 292 | Delta handling: Record &1 deleted |
| 293 | Delta handling: New record with key &1 created |
| 294 | Delta handling: &1 Duplicate Records deleted |
| 295 | &1 record(s) for XL text update are cut off due to length overrun |
| 296 | Check length of XL text field after transformation to avoid truncation |
| 300 | Messages for repairing master data tables (300-329) |
| 301 | Afterwards, execute the change run |
| 302 | Repair completed successfully |
| 330 | Messages for reorganizing the master data tables (330-349) |
| 331 | Characteristic &: Reorganization of the master data tables is simulated |
| 332 | Characteristic &: & data records in version M deleted from table & |
| 333 | Characteristic &: & percent of the & data records deleted from table & |
| 350 | Instant MD activation is limited to SAP HANA DB |
| 351 | Characteristic &1 with master data access &2 is not supported |
| 352 | Extraction from SAP HANA view IO only allowed for SAP HANA execution |
| 400 | Messages for writing log (400-499) |
| 401 | "&1&2" deleted in table &3 (with master data attributes only in version) |
| 402 | "&1&2" marked for deletion in table &3 (D flag for active record) |
| 403 | "&1&2" changed in table &3 (with master data attribs only in version M) |
| 404 | "&1&2" added to table &3 |
| 405 | & data records updated in table & |
| 500 | Messages for master data maintenance (500-599) |
| 501 | The selection interval from '&' to '&' is not feasible |
| 502 | A data record with the same key already exists |
| 503 | You do not have the same authorizations for all char. variants |
| 504 | You may change &1 variants and only display &2 variants |
| 505 | You do not have authorization for &1 variants |
| 506 | Decide on either change or display mode |
| 507 | No variant authorization check possible for characteristic &1 |
| 508 | You do not have authorization for this characteristic variant |
| 509 | Data record with this selection not found |
| 510 | Display/maintenance of XL text in gen. UI is restricted to 128/132 CHAR |
| 511 | Master data maintenance is started in a new window |
| 512 | Master data maintenance is being prepared |
| 513 | Maintenance of XL text via RSNDI API not via InfoObject '0TXTLG' |
| 514 | Could not delete all MD; to delete parts, set flag I_FLG_FORCE_DELETE |
| 600 | Messages for activating master data (600-699) |
| 601 | The display attributes for object & cannot be activated |
| 602 | &1 is not a time-independent display attribute of characteristic &2 |
| 603 | The following time-independent display attr. of char. & are activated |
| 604 | &1 records of master data table &2 of characteristic &3 activated |
| 605 | No activating display attribute specified for characteristic & |
| 606 | Method & can only be called for high cardinality InfoObjects |
| 607 | Fatal error during execution of method &1 |
| 608 | Error during MD insert of InfoObject &1 - check MD consistency |
| 800 | 800 - 899 reserved for special messages ( don't translate 800(RSDMD) ) |
| 801 | 2.0 Features characteristic not supported by master data maintenance |
| 802 | Metadata of navigational attribute &1 of characteristic &2 inconsistent |
| 803 | Master data maintenance of remote characteristic &1 not allowed |
| 804 | Characteristic &1 has no RECORDMODE |