RSM2 - Monitor Assistent Hilfetexte
The following messages are stored in message class RSM2: Monitor Assistent Hilfetexte.
It is part of development package RSSM in software component BW-WHM-DST. This development package consists of objects that can be grouped under "BW: General monitoring and scheduling".
It is part of development package RSSM in software component BW-WHM-DST. This development package consists of objects that can be grouped under "BW: General monitoring and scheduling".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Request has not been analyzed yet |
| 001 | No data available |
| 002 | Error message from the source system |
| 003 | Error message during processing in BW |
| 004 | Data request not confirmed |
| 005 | Data req. from file system not confirmed |
| 006 | Data req. from external system not confirmed |
| 007 | Request not confirmed, check source system outbox |
| 008 | Error when transferring data; communication error when analyzing |
| 009 | Error when sending data request |
| 010 | Request still running |
| 011 | Errors while sending packages from OLTP to BW |
| 012 | Manual processing from the source system |
| 013 | Check BW inbox |
| 014 | Non-updated Idocs found in &1 |
| 015 | InfoIdocs missing; file system |
| 016 | InfoIdocs missing; external system |
| 017 | Error 02 or 09 => Job overview |
| 018 | Job termination in source system |
| 019 | No job termination in the source system => read source system outbox |
| 020 | Short dump in the Warehouse |
| 021 | Processing in source system terminated; system error when analyzing |
| 022 | Processing in source systm terminated; communication error when analyzing |
| 023 | No Idocs were generated in source system |
| 024 | Error when updating Idocs in &1 |
| 025 | Processing in Warehouse timed out; processing steps mising |
| 026 | Do not update data immediately |
| 027 | Do not update data in source system immediately |
| 028 | Data successfully updated |
| 029 | No Idocs generated; file system |
| 030 | No Idocs generated; external system |
| 031 | Unknown error |
| 032 | Data not arrived in either PSA or InfoCube |
| 033 | Data not received in &1, but updated in &2 |
| 034 | Data not received in &1 |
| 035 | Missing data packages for &1 |
| 036 | No request Idoc generated in BW |
| 037 | Idocs missing from BW; OLTP does not have extractor status 2.0 |
| 038 | Idocs missing: &1 |
| 039 | Error log occurred when processing in Warehouse |
| 040 | Master data table locked to processing |
| 041 | Incorrect data records - error requests (total status RED) |
| 042 | Data records were selected in the PSA |
| 043 | Incorrect data records - error requests (total status GREEN) |
| 044 | Request loaded into PSA. Continue with update. |
| 045 | Not all data packets have been updated in all InfoCubes |
| 046 | No new data since the last delta update |
| 047 | Data loaded successfully; activate the DataStore object |
| 048 | Invalid aggregation during the loading process |
| 049 | Information was stored in the source system. |
| 050 | Warnings and error messages were stored in the source system. |
| 051 | Data request from external system not confirmed |
| 052 | No IDocs created; External system |
| 053 | InfoIDocs missing; External system |
| 054 | Info IDocs missing; real-time upload |
| 055 | Request successfully loaded to PSA |
| 056 | No unposted requests with more than 0 records found |
| 057 | Selections copied |
| 058 | InfoCube &1 already contains open APO request &2; see long text |
| 059 | No more data in cube &2 for request &1; administration info is deleted |
| 060 | No overlapping requests found for deletion in request & |
| 061 | Start of deletion of request &1 from data target &2; comparison req. &3 |
| 062 | Converted table: '&1'; number of changes: '&2' |
| 063 | Checking of InfoPackage '&' failed; InfoPackage cannot be started |
| 064 | No active export DS (DS:&,LS:&) for DSO &. Activity cancelled. |
| 065 | Same request &1 exists in the two PartProviders &2; Canceled in &3. |
| 066 | Multiple PartProviders of & in the same 3.X data flow. No delta possible. |
| 067 | CL req. &1 has no loading prot. Display highest loading req. &2 instead. |
| 068 | Inserted date & is invalid. Select a valid date. |
| 069 | Converted table: '&1'; number of changes: '&2'; From LS '&3' to LS '&4' |
| 070 | BDLS conversion of table: '&1' failed with errors |
| 071 | BDLS conversion of table: '&1' successful |
| 072 | Batch jobs to BDLS. The Statman tables run with Batch ID '&1'. |
| 073 | Two lines contain the same value. This is not allowed. |
| 074 | Existing Logsys field is empty in line. Please insert a value. |
| 075 | New Logsys field is empty in line. Please insert a value. |
| 076 | Batch job with job name &1 and job count &2 started immediately |
| 077 | One line contains two identical entries |
| 078 | Error &1 from FM RSDS_DATASOURCE_SINGLE_GET for DS &2 LS &3 |
| 079 | DS &1 LS &2 set to "BY-Passing PSA" (mandatory); no InfoPackages allowed |
| 080 | Cannot execute InfoPackage &1; DS &2 LS &3 set to "BY-Passing PSA" |
| 081 | Report RSBATCH_WRITE_PROT_TO_APPLLOG not planned. See long text. |
| 082 | Report RSBATCH_WRITE_PROT_TO_APPLLOG planned &1 times. See long text. |
| 083 | User &1 does not exist |
| 084 | Could not find any yellow REQU_ requests older than 1 day |
| 085 | &1 fields selected but only &2 fields are allowed. Deselect &3 field(s). |
| 086 | Choose at least 1 selectable field |
| 087 | &1 requests preselected for the next manual execution of DTP &2 |
| 088 | Request preselection for DTP &2 is empty (flag requests for selection) |
| 089 | Filter for request list due to manual request preselection in DTP |
| 100 | Could not reset instance &. Program terminates. |
| 101 | Could not set request &1 in DTA &2 to red; terminated with error &3 |
| 102 | Variant format not supported; Save the variant again |
| 120 | InfoPackage &1 does not exist (in active version) |
| 121 | Missing selection for InfoPackage &1 |
| 150 | Statistics information cannot be determined for DTA &1 type &2 |
| 151 | Statistics information determined for DTA &1 type &2 |
| 152 | No worklist found in table RSSTATREQDELREDU for DTA &1 type &2 action &3 |
| 153 | Action '&' does not exist. Cancellation. |
| 154 | No detailed information found for batch ID &1 and process &2 |
| 155 | Only Requests older than & will be checked for getting reduced |
| 156 | Data target &1 contains only &2 requests old enough for reduction |
| 157 | ICube &1 has compression problem; Compr &2 <> Compr_Dual &3. Check cube. |
| 158 | InfoCube &1 is not compressed. Only compressed requests can be reduced. |
| 159 | WO DSO &1 has archiving problem; ARCH_DONE &2 <> ARCH_TODO &3. Check DSO. |
| 160 | WO DSO &1 is not archived. Only archived requests can be reduced. |
| 161 | Cannot determine the type of DTA &1. Cancellation in FM &2 Line &3. |
| 162 | DM inflow check for DTA &1. Highest reducible request &2. |
| 163 | DM inflow check for source &1. Last transferred source request &2(&3). |
| 164 | DM inflow check. Source of data &1. Transferred with &2. |
| 165 | Standard DSO &1 contains less than 1000 requests. Number of requests: &2 |
| 166 | Highest evaluated request in standard DSO &1 is request &2(&3) |
| 167 | WO DSO &1 contains only &2 gapless green requests (less than 1000) |
| 168 | Highest gapless green request in write-opt. DSO &1 is request &2(&3) |
| 169 | DTA &1 contains only &2 further updated requests (less than 1000) |
| 170 | Highest datamarted request in DTA &1 is request &2(&3) |
| 171 | DM inflow check for DTA &1. Only &2 further datamarted requests found. |
| 172 | DM inflow check for DTA &1. Highest reducible request is request &2(&3). |
| 173 | InfoCube &1 contains only &2 compressed requests (less than 1000) |
| 174 | DM inflow check for DTA &1. Highest reducible compr. request is &2(&3). |
| 175 | WO DSO &1 contains only &2 archived requests (less than 1000) |
| 176 | DM inflow check for DTA &1. Highest reducible archived request is &2(&3). |
| 177 | Standard DSO &1 contains only &2 requests with deleted changelog request |
| 178 | Highest request with deleted changelog in DSO &1 is request &2(&3) |
| 179 | Inconsistant DM-Admin for DTA &1; DMALL &2 < Calculated Max-SID &3 |
| 180 | Inconsist. Reduction for DTA &1;Last reduc.req &2 > Calculated Max-SID &3 |
| 181 | Number of reduced requests in DTA &1: &2 |
| 182 | DTA &1 successfully reduced from request &2 to request &3 |
| 183 | Requests to be deleted in WO-DSO &1 must be older than 1 day |
| 184 | Only requests older than &1 will be checked for deletion |
| 185 | No request below date &1 found for deletion |
| 186 | Cannot find request &1 from RSICCONT in L_T_PART; Inconsistent DSO. |
| 187 | Cannot find request &1 from L_T_PART in RSICCONT; Inconsistent DSO. |
| 188 | Number of deleted requests in WO-DSO &1: &2 |
| 189 | WO DSO &1 deleted from request &2 to request &3 |
| 190 | Number of requests &1 that can be deleted is less than remaining no. (&2) |
| 191 | Number of deleted requests in InfoObject &1: &2 |
| 192 | InfoObject &1 successfully deleted from request &2 to request &3 |
| 193 | A planned Deletion Run found for this WO-DSO; NO Reduction Run possible |
| 194 | A planned Reduction Run found for this WO-DSO; NO Deletion Run possible |
| 195 | Reduced Reqests found for this WO-DSO; NO Deletion Run possible |
| 199 | No background job found for jobname '&1' |
| 200 | NO protocols for reduction runs found for data target &1 |
| 201 | No DataTarget type choosen for filtering; Choose at least one type |
| 202 | No Color of DataTarget choosen for filtering; Choose at least one color |
| 203 | Please insert a Variant |
| 204 | Variant already exists in Dropdown Box; Insert a new Variant |
| 205 | Variant &1 already exists for a deletion run. Insert a new variant. |
| 206 | First create or choose a variant before starting the action |
| 207 | Variant &1 already exists for a reduction run. Insert a new variant. |
| 208 | Select the DTAs that you want to mass process together |
| 209 | NO DTA(s) selected anymore. Mass processing terminated. |
| 300 | Encrypted value for field &1 can not be read from Secure Storage |
| 301 | Secure Storage is not working correctly; Program &1 |
| 302 | Field content is too long; Field "&1" will be truncated after position &2 |
| 303 | 3rd party field &1 value &2 not found in Secstore at Ipak copy &3 to &4 |
| 500 | ***** Selection history **** |
| 501 | Incorrect number of parameters: Enter the InfoPack id or the request no. |
| 502 | No valid requests for this InfoPackage |
| 503 | The request does not have 'OK' status - no system logging is permitted |
| 504 | Incorrect Type |
| 505 | Choose at least one option |
| 506 | Request is not updated in the Infocubes - no system logging is permitted |
| 700 | *** Error handler *** |
| 701 | No log exists for record no. &1 (packet &2) |
| 702 | Record &1 for user &2 changed on &3 at &4 |
| 703 | Record &1 (InfoCube) not in cross record table |
| 704 | Data records for package &2 selected in PSA - &1 error(s) |
| 705 | &1 incorrect records for packet &2 - generation of error request marked |
| 706 | Too many error records - update terminated |
| 707 | &1 records received from request &2 |
| 708 | Error records written to application log |
| 709 | No sub-request for this request |
| 710 | &1 error records found - update terminated in customer rountine |
| 711 | Several update records for the same PSA record. Not all invalid. |
| 712 | Incomplete update due to errors in single records --> Long text |
| 713 | ...more messages in the PSA display (double-click on LED) |
| 714 | Messages (type &) for data records with record number 0 |
| 715 | Update terminated in accordance with error handling setting |
| 716 | Record &1, segment &2 is not in the cross-record table |
| 717 | Error while adding error log to database; records already exist |
| 718 | Messages saved for &1 data records; request green acc. to configuration |
| 719 | Messages for &1 data records saved; request is red acc. to configuration |
| 720 | Record (&1) for segment (&2) has no reference to a source record |
| 721 | No semantic key fields selected despite serialization |
| 722 | Record filtered in advance as error records with the same key exist |
| 723 | &1 records received; &2 records forwarded |
| 724 | Record filtered because records with the same key contain errors |
| 725 | Incorrect call of maintenance for PSA &1; probable program error |
| 726 | Request &1 (&2) is not available |
| 727 | Record filtered in advance because object contains errors |
| 728 | Record belongs to same object as record &1 of segment &2 |
| 729 | Step &1 is not in the cross table; probable program error |
| 730 | All records forwarded |
| 731 | No messages exist |
| 732 | Too many grouping fields |
| 733 | Total length of grouping fields is too long |
| 734 | GET_ERRORCOUNT call: Incorrect data record &1, Segment &2 passed |
| 735 | Record &1 of user &2 deleted on &3 at &4 |
| 736 | Record was deleted; no changes possible |
| 737 | Only deleted records can be retrieved |
| 850 | **** PSA Messages ***** |
| 851 | Error & when writing in PSA & |
| 852 | Data save in PSA & started |
| 853 | Reading data from PSA & started |
| 854 | & records read from PSA & |
| 855 | & records written in PSA & |
| 856 | Error & when reading PSA & |
| 857 | PSA & consistency check started |
| 858 | & records from PSA & are consistent |
| 859 | & records from PSA & are not consistent |
| 860 | Reading the data from PSA has come to an end. |