RSPLF - Planning Framework
The following messages are stored in message class RSPLF: Planning Framework.
It is part of development package RSPLF in software component BW-PLA. This development package consists of objects that can be grouped under "Planning Services Framework".
It is part of development package RSPLF in software component BW-PLA. This development package consists of objects that can be grouped under "Planning Services Framework".
Message Nr ▲ | Message Text |
|---|---|
| 001 | &1 &2 &3 &4 |
| 002 | Type &2 of variable &1 is not supported in PF &4 |
| 003 | Cannot determine a value for variable &1 |
| 004 | Variable &1 has to be restricted to a single value |
| 005 | Cannot determine characteristic values for variable &1 |
| 006 | Planning function &1 does not exist |
| 007 | Inconsistent data records created |
| 008 | You have not specified an InfoObject in the selection conditions |
| 009 | You have not specified a sign in the selection conditions |
| 010 | The sign in the selection conditions is incorrect: &1 instead of 'I', 'E' |
| 011 | The condition in the selection is incorrect: &1 is not permitted |
| 012 | Upper limit &1 is redundant in the selection |
| 013 | Variable &1 does not exist; delete usages of this variable or recreate it |
| 014 | Display type &1 is not supported |
| 015 | Char. value of &1 &2 does not correspond to value of block char. &3 |
| 016 | Value of characteristic &1: &2 is not included in the selection |
| 017 | Value &2 for characteristic &1 is not valid |
| 018 | Reference data is not unique |
| 019 | &1 records read, &2 generated, &3 changed, &4 deleted |
| 020 | Error revaluating &1 with value &2 and factor &3 |
| 021 | Characteristic &1 is not permitted in the selection condition |
| 022 | Cannot find InfoObject &1 |
| 023 | Master data selection for &1 is incorrect |
| 024 | No sender exists for receiver number &1 |
| 025 | No receiver exists for sender number &1 |
| 026 | Specify a selection for the characteristic &1 |
| 027 | No master data found for selection of &1 |
| 028 | Enter variable values before executing |
| 029 | Class &1 does not implement interface &2 |
| 030 | Cannot generate object of class &1 |
| 031 | Select key figures |
| 032 | Maintain from-values |
| 033 | Maintain to-values |
| 034 | Select at least one field to be changed |
| 035 | Filter and function have different InfoProviders: &1 and &2 |
| 036 | InfoObject &1 does not exist in InfoProvider &2 |
| 037 | Field &1 has to be selected as a field to be changed |
| 038 | Field &1 must not be selected as a field to be changed |
| 039 | Currency translation type &1 does not exist |
| 040 | Enter a valid key figure instead of &1 |
| 041 | Enter a currency translation type |
| 042 | Curreny for &1 is fixed at &2 and is not determined by translation key &3 |
| 043 | Target currency for &1 cannot be determined with translation key &2 |
| 044 | Error during currency translation; translation key &1 |
| 045 | Char. &1 for determining currency dynamically does not exist in InfoProv. |
| 046 | Enter a quantity conversion key |
| 047 | Char. &1 for determining unit dynamically does not exist in InfoProvider |
| 048 | Unit for &1 cannot be determined with translation key &2 |
| 049 | Char. &1 for determining unit dynamically does not exist in InfoProvider |
| 050 | Unit for &1 is fixed at &2 and is not determined from translation key &3 |
| 051 | Char. &1 for determining factors dynamically does not exist in InfoProv. |
| 052 | Aggregation level &1 is not appropriate for this function |
| 053 | &1 characteristic is not being derived and cannot be changed |
| 054 | Cannot determine attribute &3 for the &1 characteristic with value &2 |
| 055 | At least one characteristic must not be selected as to be changed |
| 056 | Cannot create function type on this aggregation level |
| 057 | as the aggregation level doesn't contain all InfoObjects of the InfoProv. |
| 058 | Compound characteristic &1 of &2 is not selected as to be changed |
| 059 | Selection checked for &1 (value &2) |
| 060 | No condition fulfilled; data is not changed |
| 061 | No unit/currency entered for key figure &1 |
| 062 | No value entered for &2 for key figure &1 with exception aggregation |
| 063 | Cannot change key figure &1 with aggregation &2 |
| 064 | Too many messages; only the first &1 messages collected |
| 065 | Time reference in currency translation type &1 is not supported |
| 066 | Char. &1 for the conversion factor is missing in the aggregation level |
| 067 | Char. &1 for determining the date is missing in the aggregation level |
| 068 | Currency translation type &1 cannot be used in planning |
| 069 | InfoObject &1 has no attribute for reading the target currency |
| 070 | Parameter &1 does not exist. Activate BI Content |
| 071 | Aggregation level &1 does not contain InfoObject &2 |
| 072 | The aggregation level doesn't contain a DSO object |
| 073 | Incorrect data link &1 |
| 074 | Filter for master data (internal format) : &1, &2, &3 |
| 090 | Cannot remove characteristic &1 from the block characteristics |
| 091 | Execution mode: In-Memory |
| 092 | &1 records read without zero records |
| 093 | Filter for characteristic &1 |
| 094 | Only the first 10 conditions are displayed |
| 099 | &1 &2 &3 &4 |
| 100 | ---- 100-150 ----- Messages for Planning Functions ---------------------- |
| 101 | No active version of planning function &1 available |
| 102 | Error in planning function &1; no active version of function type &2 |
| 103 | Error in planning function &1; no active version of InfoProvider &2 |
| 104 | Planning function &1 is not available in version &2 |
| 105 | Planning function &1 is locked by user '&2'; only display is possible |
| 106 | Planning function &1 is locked; only display is possible |
| 107 | Planning function &1 is locked by the Change and Transport Organizer |
| 108 | Syntax error in row &1, column &2 |
| 109 | You are not authorized to execute planning function &1 |
| 110 | Planning function &1 already exists |
| 111 | You are not authorized to create planning function &1 |
| 112 | Planning function &1 is not locked |
| 113 | &1 executed without errors |
| 114 | &1 ended with errors |
| 115 | InfoObject &1 invalid; only characteristics to be changed are permitted |
| 116 | InfoObject &1 invalid; no characteristics to be changed are permitted |
| 117 | InfoObject &1 invalid; only characteristics for conditions are permitted |
| 118 | InfoObject &1 is not included in the aggregation level |
| 119 | Variable &1 invalid; only single values are permitted |
| 120 | Only single values are permitted |
| 121 | Hierarchy node '&1'/'&2' does not exist |
| 122 | Hierarchy node '&1'/'&2' does not contain values from characteristic &3 |
| 123 | InfoObject &1 is not active |
| 124 | Variable &1 is not available in an active version |
| 125 | Value '&1' from the &2 InfoObject is in an invalid format |
| 126 | Value '&1' from the &2 characteristic is not valid |
| 127 | Planning function & 1 does not exist |
| 128 | Errors when reading filter |
| 129 | Error when reading planning function &1 |
| 130 | Errors found in parameters for condition &1: |
| 131 | Function cannot be applied to MultiProviders |
| 132 | You are not authorized to read the data |
| 133 | You are not authorized to change planning function &1 |
| 134 | Variable &1 not valid; can only be replaced with variables |
| 135 | Variable &1 is not valid; the type is not suitable |
| 136 | Information about the hierarchy is expected:&1 |
| 137 | Hierarchy node variables in formulas must use identical hierarchies |
| 138 | Hierarchy &1 for InfoObject &2 not found |
| 139 | Error converting hierarchy for InfoObject &1 |
| 140 | Filter selection describes empty set |
| 141 | Data protected by Data Slices or Characteristic Relationships EXIT |
| 142 | Value &2 of parameter &1 is not valid |
| 143 | InfoObject &1 must be used for conditions only |
| 144 | Filter for characteristic &1 represents the empty set |
| 145 | Filter for ref. data of characteristic &1 represents the empty set |
| 150 | --------- Messages for Planning Function Types ------------------------- |
| 151 | Function type '&1' is not available in an active version |
| 152 | Function type '&1' does not exist |
| 153 | Function type '&1' is not available in &2 version |
| 154 | Function type '&1' is not locked |
| 155 | Function type '&1' reset to active version |
| 156 | Error resetting function type '&1' to active version |
| 157 | Function type '&1' locked by Change and Transport Organizer |
| 158 | Error in parameter &1: &2 InfoObject is not active |
| 159 | No InfoObject specified for parameter &1 |
| 160 | Error in parameter &1: Data element '&2' is invalid |
| 161 | Error in parameter &1: Default value '&2' is not permitted |
| 162 | Error in parameter &1: Parameter type '&2' is invalid |
| 163 | Structured parameter '&1' does not have any components |
| 164 | Enter name of function type |
| 165 | Function type '&' to be deleted by transport (delete only allowed) |
| 166 | Function type '&1' is locked by user '&2'; display only possible |
| 167 | Function type '&1' is locked; display only possible |
| 168 | Function type '&1' already exists |
| 169 | Function type '&1' activated |
| 170 | You are not authorized to change function type '&1' |
| 171 | Error while activating function type '&1' |
| 172 | You do not have authorization to create function type &1 |
| 173 | You do not have authorization to display function type &1 |
| 174 | Function type &1 has no errors |
| 175 | Parameter name &1 contains non-alphanumeric characters |
| 176 | Enter a parameter name |
| 177 | Highlight the parameter that you want to move |
| 178 | Parameter &1 cannot be moved |
| 179 | Function type &1 saved |
| 180 | No ABAP class specifed for function type &1 |
| 181 | Object status of function type &1 set to inactive |
| 182 | Function type &1 deleted |
| 183 | Function DECIMALS InfoObject &1 does not exist |
| 190 | Interface method called in wrong context |
| 191 | Error in planning function type &1; parameter &2 does not exist |
| 192 | Program error in function type &1; type conflict in parameter &2 |
| 193 | Planning function &1 cannot be applied |
| 194 | Read in File first |
| 195 | Filter entries from file &1 exceed limit |
| 196 | No process chain was executed |
| 197 | Tuple in filters for planning functions are not supported |
| 198 | File content is empty or content could not be read. Check the file. |
| 200 | --------- Messages for RFC Serialisation ------------------------------- |
| 201 | Conversion problem for value: &1, and InfoObject: &2. Show default |
| 202 | Cannot convert default value '&3' for parameter &1(&2) |
| 203 | Conversion problem for value: &1, and InfoObject: &2. Rows omitted |
| 204 | Cannot read variable &1; reset the value |
| 205 | Error while reading variable &1: Conversion with Sy-date |
| 220 | Program error: Field &1 is not an attribute of InfoProvider &2 |
| 300 | ---- Further messages for planning functions ---- |
| 301 | Context information for the other messages |
| 302 | Selection for characteristic &1: Single value &2 |
| 303 | Selection for characteristic &1: From &2 to &3 |
| 304 | No reference data exists; data has not been distributed |
| 305 | Distributed equally to combinations available in the transaction data |
| 306 | No transaction data; Distributed equally to permitted combinations |
| 307 | No default possible; No transaction data; No combinations permitted |
| 308 | Error while generating combinations |
| 309 | To-value &1 for subprocess &2 produces following errors |
| 310 | After-value restriction &1 for sub-process &2 produces following errors |
| 311 | Cannot find reference data for sub-process &1 of the function |
| 312 | Corresponding data has not been distributed |
| 313 | Reference data with total zero. Key figure &1 in subprocess &2 |
| 314 | Reference data with non unique +/- sign. Key figure &1, subprocess &2 |
| 315 | Create at least one distribution process |
| 316 | Factors for subprocess &1 result in total 0 |
| 317 | Factors for subprocess &1 have different +/- signs |
| 318 | Select at least one key figure |
| 320 | ---- Messages for forecasting planning function type ---- |
| 321 | Select a time characteristic |
| 322 | Characteristic &1 is not a time characteristic |
| 323 | Choose a forecast strategy |
| 324 | Forecast strategie &1 is not valid |
| 325 | Specify a time frame for the forecast |
| 326 | Specify a historic time frame |
| 327 | For the sequence, enter a value greater than or equal to 1 |
| 328 | Enter at least one weighting factor |
| 329 | Enter a value greater than or equal to 0 |
| 330 | Enter a value greater 0 |
| 331 | Method &1 for correcting outliers is not valid |
| 332 | Restrict characteristic &1 to a single value |
| 333 | Select a time characteristic and its higher-level characteristics |
| 334 | At least one weighting factor has to be greater than 0 |
| 335 | Enter a value that is lesser than or equal to 1 |
| 336 | The upper limit has to be greater than or equal to the lower limit |
| 337 | Forecast period must not overlap with historic period |
| 338 | End of historic period &1 is greater than or equal to forecast start &2 |
| 339 | Cannot identify forecast period |
| 340 | Mean absolute error (MAE): &1 |
| 341 | Error total: &1 |
| 342 | Mean absolute percentage error (MAPE): &1 |
| 343 | Mean percentage error (MPE): &1 |
| 344 | Mean squared error (MSE): &1 |
| 345 | Root of mean squared error (RMSE): &1 |
| 346 | Number of outliers: &1 |
| 347 | Forecast period does not fall within F4 time interval |
| 348 | Past period does not fall within F4 time interval |
| 349 | Cannot identify the past period |
| 400 | ---- messages for parallel execution of sequences (400-450) ---- |
| 401 | Step &1 (function &2): Subprocess &3 started |
| 402 | Step &1: Framework cannot start subprocess &2; see system log |
| 403 | Start of step &1 (function &2) &3 subprocesses |
| 404 | Function module &1 returns exception &2 |
| 405 | Step &1, function &2: All subprocesses executed |
| 406 | Subprocess &1 (function:&2, partition:&3): Loop &4 |
| 407 | At least one subprocess was not successful |
| 408 | Subprocess &1 was not successful |
| 409 | Errors while reading filter &1 |
| 410 | Error while resolving selection for filter &1 |
| 411 | Start processing process variant: &1 |
| 412 | Master cannot read return value from subprocess &1 |
| 413 | Planning sequence terminated |
| 414 | Select one characteristic |
| 415 | Select at least one characteristic |
| 416 | Error while reading characteristic values for InfoObject &1 in step &2 |
| 417 | Packaging not requested for this step |
| 418 | &1 values distributed to &2 packages with a maximum of &3 values |
| 419 | Error in random generator for value &1 |
| 420 | Starting step &1 (function &2) |
| 421 | No entry in control table for planning sequences |
| 422 | Step &1 of planning sequence not fully executed |
| 423 | There are no entries in tables for background process &1 |
| 424 | Background process &1 did not finish successfully |
| 425 | Error while generating OLAP variable containers for filter &1 |
| 426 | Step &1: Calculation not possible; no InfoObject selected |
| 427 | Not all variables can be resolved with variable variant &1 |
| 428 | Planning sequence &1 is not consistent |
| 429 | Settings are consistent |
| 430 | Planning sequence or variable variants changed |
| 431 | Copy changes first |
| 432 | In step &1: Value &2 not permitted for column &3 |
| 433 | Using characteristic &1 for packaging |
| 434 | Aggregation level: &1; error while determining packaging characteristics |
| 435 | Reduce the number of packages to &1 |
| 436 | Step &1: Proposal not possible; incorrect packaging type |
| 437 | Step &1: Proposal not possible |
| 438 | Step &1: Only one characteristic found with &2 values |
| 439 | Processing step &1 |
| 440 | Step &1: Error during packaging |
| 441 | Step &1: Packaging successful |
| 442 | Step &1: No packaging characteristic |
| 443 | Step &1: Proposal not possible; InfoObject already selected |
| 444 | Error (&1) while reading details for InfoProider &2 |
| 445 | Select at least one step |
| 446 | Start repairing instance &1 (process variant &1) |
| 447 | Cannot open log for last execution |
| 448 | Creating new instance |
| 449 | Cannot execute without packaging since last execution used packaging |
| 450 | No administration entries exist for execution &1 |
| 451 | >>> Start analyzing step &1 (batch ID: &2) |
| 452 | Execution instance &1 (of planning sequence) locked by user &2 |
| 453 | Execution instance &1 (of planning sequence) locked |
| 454 | Error during lock request for execution instance &1 |
| 455 | >>> Messages for last step written to log |
| 456 | >>> No messages written for last step |
| 457 | Cannot repair execution instance |
| 458 | Cannot repair old execution instance (prior to SP12) |
| 459 | Planning sequence is being restarted |
| 460 | Start repair run |
| 461 | Use new application log |
| 462 | Cannot save execution instance persistently |
| 463 | Last execution was performed without packaging |
| 464 | No batch ID stored for last execution |
| 465 | No step information exists for last execution |
| 466 | Executing all steps after the first step |
| 467 | Last step started: &1 |
| 468 | Step &1 completely and successfully executed |
| 469 | Start analysis of execution instance &1 (repair number &2) |
| 470 | Process: &1, planning sequence: &2, packaging: &3, batch ID: &4 |
| 471 | Repair step executes all subsequent steps |
| 472 | Check subjob &1 |
| 473 | In system, subjob &1 stil has system: Incomplete |
| 474 | Subjobs exist with status: Incomplete |
| 475 | No repair possible |
| 476 | No further steps to execute |
| 477 | Start repairing step &1 (&2 subjobs to repair) |
| 478 | Nothing to delete |
| 479 | Repair attempt terminated |
| 480 | There are no characteristics that can be used for packaging |
| 481 | Step not packaged |
| 482 | Maximum number of found values 0 (characteristic &1) |
| 483 | All messages for the planning sequence follow |
| 484 | Closing batch manager because sequence terminated early |
| 485 | Error while sending termination process; see system log |
| 486 | Cannot start subjob &1; see system log, return value &2 |
| 487 | Restarting subjob &1 |
| 488 | All subjobs executed that are to be repaired |
| 489 | Action canceled by user |
| 490 | Characteristic &1 in step &2 not allowed as packaging characteristic |
| 491 | Planning sequqence canceled after 180 attempts |
| 501 | Function &1 is executed with different selections |
| 502 | No characteristics available for defining a delta |
| 503 | No changed data for this function |
| 504 | Function &1 is executed with different aggregation levels |
| 505 | Errors occurred while executing sequence &1 before saving |
| 506 | Key figure &1 (not contained in aggregation level) contains value &2 |
| 510 | Planning function executed on the application server in trace mode |
| 511 | Planning function does not support key figure &1 |
| 512 | Plan data for InfoProvider &1 must not be created |
| 513 | The compounded key figures &1 and &2 must be processed together |
| 550 | Conversion failure for field &1 in line &2 with value &3 |
| 551 | There can only be one planning function for data upload |
| 552 | Record in line &1 is a duplicate from line &2 |
| 553 | Please enter a file position |
| 554 | InfoObject &1 is not contained in aggregation level |
| 555 | Please define an InfoObject mapping |
| 556 | InfoObject from mapping &1 doesn't exist in aggregation level |
| 557 | Variable &1 cannot be set with &2 values |
| 558 | Please enter a first row with data for the file content |
| 559 | The first row &1 must be higher than the row with mapping info &2 |
| 560 | No InfoObjects found in Mapping Info Row |
| 561 | Define either a mapping or a line with InfoObject names |
| 562 | Position &1 is used more than once |
| 563 | InfoObject &1 is specified more than once |
| 565 | Enter a process chain |
| 566 | &1 filter data and &2 reference data records skipped |
| 567 | &2 records skipped from InfoProvider &1 |
| 575 | Only multiprovider with one partprov are allowed for this function type |
| 576 | Infoobject &1 is not mapped |
| 600 | Separator, decimal format and escape char must be different characters |
| 601 | Parameter &1 cannot be used in this function type |
| 602 | Data returned from BRFplus is inconsistent (row: &1) |
| 799 | --------- Exception Messages RFC API------------------------------------- |
| 800 | Internal error in BW-PLA: Program, &1, row &2, context &3 |
| 801 | Could not read internal characteristic value &1 for characteristic &2 |
| 802 | Could not read external charcteristic value &1 for characteristic &2 |
| 803 | Cannot read variable &1 |
| 804 | Key figure type &1 with data type &2 of parameter &3 is not supported |
| 805 | Wrong variable &1 in PF &2: Use a single or multiple single values var. |
| 806 | Variable &1 in PF &2 can only input Include Equal single values |