RSTRAN - Messages for Transformation
The following messages are stored in message class RSTRAN: Messages for Transformation.
It is part of development package RSTRAN in software component BW-WHM-DST. This development package consists of objects that can be grouped under "Transformation".
It is part of development package RSTRAN in software component BW-WHM-DST. This development package consists of objects that can be grouped under "Transformation".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Internal error: & & & & - contact SAP |
| 001 | Transformation &1 was activated |
| 002 | Transformation &1 was successfully generated |
| 003 | Transformation reset to active version |
| 004 | TLOGO Object &1 is unknown |
| 005 | Action canceled by user |
| 007 | Setting dependent object &1 &2 to inactive |
| 009 | You are not authorized to change the transformation |
| 010 | Transformation does not exist (see long text) |
| 011 | You are not authorized to use this transformation |
| 012 | Transformation &1 set to inactive |
| 013 | Transformation saved successfully |
| 014 | No errors found during rule check |
| 015 | Transformation &1 set to inactive |
| 016 | Proposal generated with &1 rule(s) |
| 017 | Cannot generate proposal |
| 018 | Generation status of transformation &1 will be reset |
| 019 | &1 of &2 rules were copied |
| 020 | Cannot update &1 parameter in rule step &2 to target field |
| 021 | Cannot assign parameter &1 of rule step &2 uniquely |
| 022 | Mapping does not exist for parameter &1 of rule step &2 |
| 023 | Only &1 Source Fields Are Permitted for This Rule Cateogry |
| 024 | Only &1 Target Field Permitted for This Rule Type |
| 025 | Only &1 Source Currency/Unit Field Is Permitted for This Rule Type |
| 026 | InfoObject & does not exist; InfoObject assignment is being deleted |
| 029 | No DSO exists that fulfills the read conditions |
| 030 | Select an object type before using input help |
| 031 | No InfoObject available for reading of master data |
| 032 | InfoObject &1 not a valid source characteristic for target InfoObject &2 |
| 033 | No DSO exists that fulfills the read conditions |
| 035 | First select one or more rules in order to delete the rules |
| 036 | &1 rules were deleted |
| 037 | Current group was deleted |
| 038 | Routine was deleted |
| 039 | Transformation was deleted successfully |
| 040 | InfoObject &1 is not permitted as a target InfoObject |
| 041 | Unable to delete transformation |
| 042 | Select the source field that you want to delete |
| 043 | Transformation &1 deleted |
| 044 | Canceled by user |
| 045 | Cannot delete standard group |
| 046 | No key for target: Cannot create group |
| 048 | Technical group cannot be deleted |
| 049 | Could not delete dependent DTP |
| 050 | Error when converting constant |
| 051 | Incorrect Input |
| 052 | No F4 help available |
| 053 | Dialog terminated by user |
| 054 | No values exist |
| 055 | F4 Help error |
| 056 | No constant date defined for reading master data from & |
| 057 | No source time characteristic assigned for reading master data from & |
| 060 | Rule &1 of transformation &2 (&3) is not valid and is being deleted |
| 061 | Routines of transformation &1 (&2) deleted in &3 |
| 062 | Formulas of transformation &1 (&2) deleted in &3 |
| 066 | InfoObject &1 can not be used to read master data |
| 070 | Automatic time conversion is not possible for source field &1 |
| 071 | No valid rule for the fiscal year variant |
| 072 | Fiscal year variant filled by system or data target |
| 073 | Time distribution not possible: Functionality not available |
| 074 | Time distribution not possible for time characteristic &1 |
| 075 | Characteristic &2 compounded to &1 is missing in transformation source |
| 076 | Conversion between time characteristics &1 and &2 |
| 077 | Search term '&1' found and corresponding field selected |
| 080 | You cannot select any other source segment for this target segment |
| 081 | Transformation &1 could not be deactivated |
| 085 | Transformation &1 deleted in version &2 of &3 |
| 086 | There is no orphaned transformation for this parameter |
| 087 | Transformation &1 in version &2 deleted |
| 088 | Could not delete routines of transformation &1 |
| 090 | Transformations already exist for &1 |
| 091 | Cannot copy transformation &1 to &2 |
| 092 | Only one transformation permitted for semantically partitioned InfoProv. |
| 093 | Transformation &1 belongs to sem. part. object &2. No transport connect. |
| 095 | Could not set InfoArea for InfoObject |
| 096 | Of &1 combinations, &2 transformations were successfully tested |
| 097 | TADIR: &1, &2, &3 deleted |
| 098 | Activation has the following effects on transformations: |
| 099 | Unit mapping for &3 key figure rules added automatically |
| 100 | *** content messages *** |
| 101 | No content version exists on the database for &1 &2 |
| 102 | Master data load process is not possible for InfoObject &1 |
| 110 | Could not transfer all selected fields |
| 111 | Required parameters (highlighted in color) cannot be removed |
| 112 | The transformation can be processed in SAP HANA |
| 114 | Feature not supported with HANA runtime |
| 115 | Invalid combination of HANA runtime and ABAP runtime features |
| 120 | InfoObjects must be assigned to the DataSource fields |
| 140 | Problems while deleting transformation &1 in version &2 |
| 160 | Transformation was generated, but SOURCEACTIVE = & and TARGETACTIVE = & |
| 170 | Fields of the rule invalid for a conversion |
| 200 | Application component is not available in active version |
| 204 | Merge for transformation &1 not possible. See SAP Note 2048634. |
| 205 | Merge TRFN & not possible. Error while generating OBJVERS = & |
| 251 | InfoObject &1 is not active in the system and is being deleted |
| 252 | InfoObject &1 does not exist in delivered version |
| 261 | InfoSource &1 is not active and cannot be used |
| 265 | InfoSource &1 not available in version &2 |
| 300 | Number 300 - 400 runtime errors at transformation runtime |
| 301 | Runtime error while executing rule -> see long text |
| 302 | Exception & raised; data record skipped |
| 303 | Exception &2 ; see long text |
| 304 | Error deriving hierarchy InfoObject from field name &1 |
| 310 | Time stamp &1 or target time zone &2 not valid |
| 311 | Time stamp conversion: Target time zone &1 invalid |
| 312 | A key figure <> 0 is not permitted for unit ' ' -> see long text |
| 320 | End routine - data record number is not known; see long text |
| 321 | Exception &1 occurred |
| 330 | No active version available for transformation '&1' |
| 331 | No runtime object available for transformation '&1' |
| 332 | Runtime object '&2' for transformation '&1' does not exist |
| 333 | Error creating runtime object '&2' for transformation '&1' |
| 334 | Runtime object '&2' for transformation '&1' is inconsistent |
| 340 | Prefetch not possible for DataStore object &1 |
| 341 | Could not read data from DataStore object &1 |
| 342 | Cannot read from DataStore object &1 for record &2 |
| 343 | Reserved for BR1 |
| 344 | Transformation &1 contains invalid rules |
| 345 | If an error occurs, the initial value is set for reading |
| 346 | Rule &2 could not be added automatically |
| 347 | Unit mapping for rule &2 does not exist |
| 348 | Rule (target: &2 group: &3): No InfoObject assigned |
| 350 | Rule (target: &2 group: &3): No DataStore object entered |
| 351 | Rule (target: &2 group: &3): No key fields assigned |
| 352 | Rule (target: &2 group: &3): No target field for &4 assigned |
| 353 | Rule (target: &2 group: &3): No source field for &4 assigned |
| 354 | Rule (target: &2 group: &3): DataStore &4 not possible |
| 355 | DataStore object &1 not possible |
| 356 | Rule (target: &2 group: &3): Assigned field &4 does not exist |
| 357 | Rule &1: DSO &2 cannot be used to look up InfoObject &3 |
| 360 | Rule (target: &2 group: &3): DataStore object &4 not possible |
| 400 | *** Transport Messages *** |
| 401 | Transformation &1: Rule &2 could not be imported |
| 402 | Formula &1 is locked by the Change and Transport Organizer |
| 403 | Transformation &1 locked by the Change and Transport Organizer |
| 404 | &1 transformations for source system &2 implemented in source system &3 |
| 405 | &1 catalog entries (TADIR) changed |
| 406 | 'ORGTRANID' updated for &1 transformations |
| 408 | Transformation &1: Rule &2 could not be installed. |
| 409 | Activation of Transformation &1 skipped. Source ADSO &2 needs remodelling |
| 410 | Activation of Transformation &1 skipped. Target ADSO &2 needs remodelling |
| 500 | **** Messages for check **** |
| 501 | Rule (target: &2): No valid rule type set |
| 502 | Rule (target: &3): Source parameter &1 is not being used |
| 503 | Rule (target: &3): Target parameter &1 is not being used |
| 504 | Rule (target: &2 group: &3 ): Constant is initial |
| 505 | Rule (target: &2 group: &3): No master data characteristic selected |
| 506 | Rule (target: &2 group &3): Time conversion cannot be performed |
| 507 | You have not maintained a rule for the fiscal year variant |
| 508 | Key rule (target field: &2): Initial update selected |
| 509 | Rule (target field: &2): Value of constants is not valid |
| 510 | Error while activating transformation |
| 511 | Error during generation |
| 512 | Cannot undo reference to fiscal year variant rule |
| 513 | Cannot undo reference rule for fiscal year variant |
| 514 | No rule exists for Transformation ID &1 |
| 515 | No source fields assigned to rule (target: &2 group &3) |
| 516 | No target fields assigned to rule &1 (group: &2) |
| 517 | Rule (target field: &2): No source unit assigned |
| 518 | Rule (target field: &2): No source field assigned |
| 519 | Rule (target field: &2): No target unit assigned |
| 520 | Rule (target field: &2): No target field assigned |
| 521 | Check successful; no errors found |
| 522 | Rule (target field: &2): Time-reference characteristic &3 not filled |
| 523 | Rule (target: &2 group: &3): Syntax error in routine |
| 524 | Rule (target field: &2 group: &3): Conversion type missing or invalid |
| 525 | Rule (target field: &2, group: &3): InfoObject properties &4 |
| 526 | Rule (target field: &2): Field &3 must be assigned to an InfoObject |
| 527 | &1: Syntax error in routine |
| 528 | Rule (target field: &2 group: &3): No constant for time dependency |
| 529 | Rule (target field: &2 group: &3): Time char. &4 in rule unknown |
| 530 | Rule (target field: &2 group: &3): No time characteristic assigned |
| 531 | Rule (target field: &2 group: &3): InfoObject &4 missing in rule |
| 532 | Rule (target field: &2, Group: &3): Syntax error in formula |
| 533 | Rule (target field: &2, group: &3): Formula cannot be compiled |
| 534 | Rule (target field: &2, group: &3): Serious error in formula |
| 535 | Object exists with type &2, and not type &1 |
| 536 | Rule (target field: &2 group: &3): Formula is empty |
| 537 | Map unit to a currency or map a currency to unit |
| 538 | Data type of source is not required data type |
| 539 | Unit / Currency &1 of key figure &2 in rule &3 not currently |
| 540 | Rule (target field: &2, group: &3): No source unit assigned |
| 541 | Rule (target field: &2, group: &3): No source field assigned |
| 542 | Time-split Group: &1 Rule: &2 Has no keyfigure mapped |
| 543 | InfoObject &1 has characteristic routine but no rule |
| 544 | Reference rule &1 group &2 has no key target field &3 |
| 545 | InfoObject &1 missing in the rule |
| 546 | Fiscvarnt rule &1 in group &2: Only reference rule allowed |
| 547 | Rule (target field: &2): Character "'" not allowed for constants |
| 548 | Rule (target field: &2): Constants not in validity range |
| 549 | Currency conversion type &1 cannot be used in transformation |
| 550 | Version &2 of transformation &1 is inconsistent |
| 552 | Rule (target field: &2 group: &3): incomplete master data rule |
| 553 | Rule (target field: &2 group: &3): Hierarchy split not possible |
| 554 | Rule (target field: &2 group: &3): InfoObject assignment not possible |
| 555 | Rule for 0RECORDMODE is not valid |
| 556 | Rule (target field: &2 group: &3): time dependency master data rule |
| 557 | Rule (Target Field: &2 Group: &3): Source and Target Field Length |
| 558 | Rule &1, target field &2 has conversion exit 'SNUMC'. Use HANA runtime. |
| 559 | Previous message applies to the target segment &1 '&2' |
| 560 | Non-keys were selected for the semantic grouping |
| 561 | Fields were selected for the semantic grouping |
| 562 | Semantic grouping not supported for HANA runtime |
| 563 | Rule (target field: &2 group: &3): Source and target field length |
| 564 | Rule (target field: &2 group: &3): Source and target field length |
| 565 | Rule (target field: &2): Check aggregation 'Overwrite' |
| 566 | Rule (target field: &2): Check aggregation 'Summation' |
| 567 | Rule (target field: &2): Check aggregation behavior |
| 568 | Transformation &1 has invalid runtime status and cannot be activated |
| 569 | Rule (target field: &2 group: &3): Selected source field not possible |
| 570 | *** Message for Check Report *** |
| 571 | No entry found in table &1 for &2 object version &3 |
| 572 | The following entries from &1 have no entry in &2: |
| 573 | Transaction ID &1; object version &2 |
| 574 | Transaction ID &1; object version &2; rule ID &3 |
| 575 | Transaction ID &1; object version &2; rule ID &3; mapping &4 |
| 576 | Transaction ID &1; object version &2; rule ID &3; step ID &4 |
| 577 | No inconsistencies found for transaction ID &1 object version &2 |
| 581 | Rule &1 (target field: &2 group: &3): Check field properties |
| 582 | Target field &1 of type &2 in rule &3 not supported in time split of &4 |
| 585 | Rule (Target field: &2 Group: &3): InfoObject &4 not available |
| 586 | Rule (Target Field: &2 Group: &3): No index available |
| 591 | SAP HANA processing not possible |
| 593 | Rule (target: &2 group: &3): Coding is empty |
| 596 | Key of InfoSource '&1' is not used to aggregate data in HANA runtime |
| 597 | Rule &1 (target field: &2 group: &3): HANA processing not possible |
| 598 | Rule &1 (target field: &2 group: &3): ABAP processing not possible |
| 599 | Rule &1 (target field: &2 group: &3): invalid processing |
| 600 | InfoObject &1 already exists in segment |
| 601 | Cannot delete segment &1 |
| 602 | InfoSource &1 successfully deleted |
| 603 | Error while deleting InfoSource &1 |
| 604 | InfoSource &1 saved successfully |
| 605 | InfoSource &1 activated |
| 606 | Error while saving InfoSource &1 |
| 607 | InfoObject in row &1 with field name &2 is not filled |
| 608 | InfoSource &1 is not available yet |
| 609 | Deletion of the InfoSource &1 terminated |
| 610 | &1 InfoSource already exists |
| 611 | Save terminated for InfoSource &1 |
| 612 | Segment &1 created |
| 613 | &1 segment renamed as &2 |
| 614 | Action canceled |
| 615 | Errors while activating InfoSource &1 |
| 616 | The active version of template &1 &2 does not exist |
| 617 | No template selected |
| 618 | Template is not available actively |
| 619 | Action cannot be performed in display mode for InfoSource &1 |
| 620 | Field list of the InfoSource &1 is empty |
| 621 | Field &1 already exists in segment |
| 622 | Multi-segmented DataSource &1 source system &2 not supported as template |
| 624 | InfoSource &1 has a blank InfoObject/field |
| 625 | No authorization for InfoSource &1 |
| 630 | InfoSource &1 contains InfoObject '0RECORDMODE' |
| 631 | InfoSource &1 with aggregation contains '0RECORDTP' as non-key field |
| 650 | **** Messages for Transformation Template (650-699) **** |
| 651 | Rule according to &1 (group: &2, type: &3) successfully created |
| 652 | Routine according to &1 (group: &2) created. Check the syntax |
| 653 | InfoObject &1 does not exist in new target |
| 654 | InfoObject &1 does not exist in new source |
| 655 | Reference rule according to &1 (group: &2) successfully created |
| 656 | Error while creating reference rule in group &1 |
| 657 | Refer to master data according to &1 (group &2): Check time-dependency |
| 658 | Time distribution according to &1 (group &2): Check factory calendar |
| 659 | Start routine copied successfully |
| 660 | Could not create rule according to &1 (group: &2, type: &3) |
| 661 | Rule according to &1 (group: &2, type: &3) created. Error in rule details |
| 662 | Unable to create currency translation of &1 |
| 663 | Currency translation of &1 created successfully |
| 664 | Unable to load update rules |
| 665 | Unable to load InfoObject list for target |
| 666 | Unable to load InfoObject list for source |
| 667 | Initial error while generating transformation |
| 668 | Error while inserting global routine code |
| 669 | Field &1 does not exist in new source |
| 670 | InfoSource &1 created and activated successfully |
| 671 | User termination while generating InfoSource; copying terminated |
| 672 | **** Copying of InfoSource **** |
| 673 | **** Copying of Update Rules **** |
| 674 | **** Copying of Transfer Rules **** |
| 675 | InfoSource &1 already exists; this will be used for copy |
| 676 | Error while saving transformation |
| 677 | Error while activating transformation |
| 678 | Transformation saved successfully |
| 679 | Transformation activated successfully |
| 680 | Insufficient authorization to create transformation |
| 681 | InfoSource &1 does not exist |
| 682 | Creating transformation... |
| 683 | Log is being loaded |
| 684 | Global routine code inserted |
| 685 | Syntax error while migrating routine &1 |
| 686 | Syntax error &1 &2 &3 &4 |
| 687 | Update type &1, value &2 not supported |
| 688 | Currency/unit &1 assigned |
| 689 | Gen. use of structure &1; check routine and field list |
| 690 | Gen. use of structure &1; adjust field list manually |
| 691 | Routine after &1 (group: &2) copied from template |
| 692 | Start routine is copied from template |
| 693 | Error in InfoObject routine for InfoObject &1 |
| 694 | Routine for target &1 has type 'return table'. See long text |
| 700 | *** for corrections *** |
| 701 | Transformation &1, version &2 contains incorrect database entries |
| 702 | No error found on database |
| 703 | Rule &1 contains entries that can be corrected |
| 704 | Rule &1 contains entries that cannot be corrected |
| 705 | Incorrect entries that could be replaced have been replaced |
| 706 | Rule &1 deleted |
| 707 | Deletion of rules that cannot be repaired only possible in "Repair" mode |
| 708 | You are not authorized to use transformation &1 in version &2 (for &3) |
| 709 | Transformation &1 corrected and set to inactive |
| 710 | Rule &1 of Transformatio &2 is inconsistent |
| 712 | Can't determine Logsys for fld &1 required for transfer rout. in rule &2 |
| 715 | Transformation &1 is inactive (cannot be executed) |
| 750 | Field &1 used in rule &2 does not exist in the source |
| 751 | Field &1 used in rule &2 does not exist in the target |
| 752 | Field &1 used in the start routine does not exist in source - is deleted |
| 753 | Field &1 used in the end routine does not exist in target - is deleted |
| 800 | ***For exception class CX_RSTRAN_CHECK_WITH_MESSAGE*** |
| 801 | Source &1 &2 is not allowed |
| 802 | Target &1 &2 is not allowed |
| 803 | Source &1 &2 does not exist |
| 804 | No authorization for source &1 &2 |
| 805 | Target &1 &2 does not exist |
| 806 | No authorization for target &1 &2 |
| 807 | There are no fields in source &1 &2 |
| 808 | There are no fields in target &1 &2 |
| 809 | Transformation between &1 &2 and &3 &4 already exists |
| 810 | Name of source is not filled |
| 811 | Name of target is not filled |
| 812 | Transformation from an InfoSource to itself is not allowed |
| 814 | Source &1 &2 not active |
| 815 | Target &1 &2 not active |
| 817 | Cannot copy transformation &1 to transform. with source &2 and target &3 |
| 818 | Cannot copy transformation &1 to transform. with source &2 and target &3 |
| 819 | Template transformation &1 is not active |
| 821 | Error creating version &1 |
| 822 | Imported transformation &1 not activated due to errors |
| 825 | Transactional DataStore not allowed as target |
| 826 | & & & & |
| 840 | Update not possible. Package contains duplicate entries |
| 841 | Cross-tab of error handler invalidated: RECORD values will be renumbered |
| 842 | RECORD values will be renumbered |
| 849 | ***Messages for Comparison Tool*** (850-...) |
| 850 | Could not delete simulation DTP |
| 851 | Specified request number does not exist |
| 852 | Nothing selected in the overview table |
| 853 | Only single selection is possible in the current display |
| 854 | Could not delete data flow template ID &1 |
| 855 | Could not create field catalog |
| 856 | Could not find a 3.x InfoSource between source and target |
| 857 | No active 3.x InfoPackages with full update exist |
| 858 | Could not find any DTPs with full update |
| 859 | Both data flows generate identical target data |
| 860 | Data flow comparison executed. For more information, see overview table |
| 861 | Not all mandatory fields have been filled |
| 862 | Could not delete filter table |
| 863 | Could not load DTP filter settings |
| 864 | Could not generate filter menu |
| 865 | No source found for target |
| 866 | No target found for source |
| 867 | Variables and routines are not supported |
| 868 | No selection specified |
| 869 | Only single selection possible |
| 870 | Empty comparison table |
| 871 | Comparison tables do not have the same number of data packages |
| 872 | No field list found for comparison data |
| 873 | Comparison tables have different structures |
| 874 | No 3.x DataSources are available because they have been migrated |
| 875 | Error while creating the runtime program of transformation & |
| 876 | Error in Inactivation of Transformation &1 |
| 877 | Transformation &1 already transferred to transformation &2 |
| 890 | Field &1 does not exist |