RS_B4HANA_RC -
The following messages are stored in message class RS_B4HANA_RC: .
It is part of development package RS_B4HANA_RC in software component BW-WHM-MTD. This development package consists of objects that can be grouped under "SAP Readiness Check for SAP BW/4HANA".
It is part of development package RS_B4HANA_RC in software component BW-WHM-MTD. This development package consists of objects that can be grouped under "SAP Readiness Check for SAP BW/4HANA".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Unsupported check TLOGO '&1'. |
| 001 | COPR '&1' not checked invalid data. |
| 002 | Operation canceled |
| 003 | The number of BG jobs for parallel processing must be between 1 to &1. |
| 004 | Transfer into DataStore (advanced) |
| 005 | Unexpected Issue; Contact SAP |
| 006 | Object does not exist or is inactive. Activate or remove it. |
| 007 | InfoCube is auditible. Switch off Audit Property. |
| 008 | InfoCube is not HANA optimized. Convert it to HANA Optimized InfoCube. |
| 009 | Object uses not allowed NO2-Aggregation. Change or delete Keyfigure. |
| 010 | Object has too many requests. Run Request Reduction. |
| 011 | Change Master Data Access for InfoObject. Direct Access is not supported. |
| 012 | Object has data type "DATE"/ "TIME" with aggregation "SUM". |
| 013 | Delete Attribute 0RECORDMODE from InfoObject. |
| 014 | Replace Virtual Provider by different technology, cf. Note for details. |
| 015 | BPC Virtual Provider will be deleted along with its dependent queries. |
| 016 | SAP delivered content will be automatically deleted. |
| 017 | Transfer into HANA Composite Provider. |
| 018 | DTP is of type "Direct Access". Use Open ODS View instead. |
| 019 | Object inconsistent: Source does not exist, delete object manually. |
| 020 | Object inconsistent: Target does not exist, delete object manually. |
| 021 | Requests must be transferred to RSPM (Source and Target). |
| 022 | Requests must be transferred to RSPM (Source only). |
| 023 | Requests must be transferred to RSPM (Target only). |
| 024 | DTP reads from PSA. Transfer PSA to aDSO or read from source system. |
| 025 | DTP uses error handling &1. Process or delete error stack. |
| 026 | DTP uses error handling and SAP HANA Execution. |
| 027 | Object must be deleted and remodelled using SDI. |
| 028 | Truncate Table, definition will be adjusted in Ready4Conversion Task List |
| 029 | Truncate Table, definition will be transferred. |
| 030 | Requests must be transferred to RSPM. |
| 031 | Source System does not support ODP extraction for context &1 |
| 032 | PSA will be emptied or transferred to aDSO. |
| 033 | Source System Type '&1' not supported. Cf. findings for RSDS. |
| 034 | Source System Type '&1' no longer supported. |
| 035 | Source System not reacheable. Repair Connection. |
| 036 | Obsolete orphaned Process Variant will be automatically deleted. |
| 037 | Obsolete orphaned Process Variant will not be transferred. |
| 038 | Obsolete Process Variant must be transferred. |
| 039 | Migrate Object by Transaction RSMIGRATE. |
| 040 | Remodelling of DataStore Lookup is necessary, not all Keyfields are used. |
| 041 | Implement BADI RSROA_VARIABLES_EXIT_BADI instead of CMOD Exit or Variable |
| 042 | Check not possible. Function 'DELIVERY_GET_INSTALLED_COMPS' failed. |
| 043 | Check not possible. Install newer Version of Tool. |
| 044 | Material Customizing: Lexicographic Indicator Mismatch |
| 045 | Material Customizing: Significant Lenght Mismatch |
| 046 | Material Customizing: Check RSTMCNV/ TMCNV |
| 047 | SEM-Object will be transferred during Ready4Conversion |
| 048 | SEM-Object will be deleted automatically |
| 049 | Object will be skipped from transfer |
| 050 | Myself-System is missing; Check not possible |
| 051 | DataSource must be manually remodelled using HANA SDI |
| 052 | DataSource must be manually remodelled in BW/4HANA using HANA SDI |
| 053 | DataSource is not released for ODP in Source System; Release it first |
| 054 | Transfer into ODP-DataSource |
| 055 | Myself-DataSources must be remodelled via ODP-CDS in BW/4HANA |
| 056 | Change External HANA Views to CalculationView only |
| 057 | External Views are created as CalculationViews |
| 058 | SAP delivered content is not available in BW/4HANA |
| 059 | SAPI Extraction not supported |
| 060 | SAPI DataSource Extraction not supported. Remodel in BW/4 using CDS-ODP. |
| 061 | Export DataSource Extraction not supported. |
| 062 | Export DataSource Extraction not supported. Remodel in BW/4 using BW-ODP. |
| 063 | BW Data Mart connected via SAPI. Will automatically be deleted. |
| 064 | BW Data Mart connected via SAPI. Won't be available in BW/4HANA. |
| 065 | &1 SAPI DataSources are extracted via SAPI into DataMart. |
| 066 | &1 SAPI DataSources are extracted into DataMart. |
| 067 | &1 SAPI DataSources are extracted via ODP into DataMart. |
| 068 | SAPI-ODP Extraction not supported. |
| 069 | SAPI-ODP Extraction not supported. Remodel in BW/4 using BW-ODP. |
| 070 | SAPI-ODP Extraction not supported. |
| 071 | RSDDB Indices will be automatically deleted |
| 072 | RSDDB Indices will not be transferred |
| 073 | Object cannot be transferred. Reload Archive and Delete DAP. |
| 074 | Object will be deleted automatically |
| 075 | &1 InfoObjects will be migrated from InfoObject catalog to InfoArea |
| 076 | Migrate InfoPackage Group to Process Chain |
| 077 | Data from personalization DSO will be copied to table &1 |
| 078 | ODSO is HANA-optimized (IMO). Reconvert with report &1. |
| 079 | Manual Replacement by DataStore(advanced) or Standard DataStore necessary |
| 080 | Transfer into DataStore (advanced) |
| 081 | Transfer into DTP |
| 082 | Delete DataFlow and create new one using HANA Source System. |
| 083 | DataFlow will be skipped from transfer. Create new on in receiver. |
| 084 | Remove/ disable RDA Settings. Consider creating Streaming Process Chain. |
| 085 | Remove/ disable RDA Settings. Consider creating Streaming PC in receiver |
| 086 | Do not create aDSO from PSA during Transfer Tool or delete InfoPackages |
| 087 | Transfer into HANA Composite Provider |
| 088 | "Most Recent Reporting for InfoObjects" setting is not supported. |
| 089 | Current "Most Recent Reporting for InfoObjects" setting is not supported. |
| 090 | "LeftOuter: Add Filter Value to On-Condition" setting is not supported. |
| 091 | "LeftOuter: Add Filter Value to On-Condition" setting not supported. |
| 092 | "Additional Grouping Before Join" setting is not supported. |
| 093 | Current "Additional Grouping Before Join" setting is not supported. |
| 094 | NavigationAttribute from PartProvider can't be used. |
| 095 | AntiJoin is not supported. Remodel the InfoSet. |
| 096 | Usage of Referenced Keyfigures is not supported. |
| 097 | Replace Bex Object by new objects. Bex objects are cleaned up. |
| 098 | Replace Bex Object by new objects. Bex objects are transported. |
| 099 | Replace HybridProvider by Standard DataStore or DataStore(advanced) |
| 100 | Remove Object |
| 101 | Remodel Semantic Partitioned Object or change the usage |
| 102 | Replace Analytical Index by a Standard DataStore or DataStore(advanced) |
| 103 | Replace InfoSet by a DataStore |
| 104 | Remodel Quantity Conversion type |
| 105 | Remodel Currency Conversion type |
| 106 | Remodel key date derivation |
| 107 | Design Studio Persistency in BW not supported anymore. |
| 108 | Objects related to APD are not supported. |
| 109 | Simple Aggregation Levels: No automatic conversion. Remodel manually. |
| 110 | BPC4HANA addon is required to execute BPC applications. |
| 111 | BPS conversion is not available; migrate manually to BPC model. |
| 112 | Remote conversion for BPC embedded is not supported. |
| 113 | Remove and disable RDA settings. |
| 114 | Remove and disable RDA settings. |
| 115 | The option "zero elimination" will be removed during transfer. |
| 116 | Cleanup variant for aDSOs does not support absolute dates. |
| 117 | Variant uses not supported options, cf. notes 2448086/ 2723776. Remodel. |
| 118 | Deletion of overlapping requests from aDSOS only possible for full DTPs |
| 119 | Remote conversion for BPC standard is only possible via tcode UJBR. |
| 120 | Query is inconcistent and will be deleted during transfer. |
| 121 | Query is inconcistent and will be skipped during transfer. |
| 122 | Query is semantically incorrect. |
| 123 | Query definition is incorrect, please check and save the query. |
| 124 | Query needs to be converted from 3.x to 7.X. |
| 125 | Some queries might behave differently in BW/4 HANA (formula calculation) |
| 126 | Variant uses not supported options, cf. notes 2448086 and are adapted. |
| 127 | Transformation must be adjusted manually |
| 128 | Table placement is not maintained |
| 129 | DTP: Navigation attribute &1 is used in semantic groups |
| 130 | DataStore inconsistent: &1&2&3&4 |
| 131 | InfoSet &1: Aggregation NOP for &2 is not supported |
| 132 | InfoProvider uses 0LOGSYS; Execute preparation to ensure consistent data |
| 133 | Transformation &1 AMDP rule ID &2 rule type &3 has technical field &4 |
| 134 | InfoSource &1 has key fields but no aggregation flag set |
| 135 | InfoSource &1 with keys has aggr; dep. obj.&2 type &3 must not be in HANA |
| 136 | Field &1 of Rule &2(&3) will change when PSA is transferred to aDSO |
| 137 | Field &1 of Rule &2(&3) will change when PSA is not transferred to aDSO |
| 138 | Open ODS View referencing to Transformation Cannot be Transferred |