SMT -

The following messages are stored in message class SMT: .
It is part of development package GMT_GENERAL in software component CA-SOA-SMT. This development package consists of objects that can be grouped under "Objects for All Packages Within GMT".

Message Nr ▲	Message Text
000	Class &1 does not exist
001	Method &1 does not exist
002	Table TWUF_TR: No entry for mapping &1 step &2 trans. key &3
003	Structure &1 does not exist
004	Field &1 does not exist
005	For mapping &1 there is no step &2
006	Class &1 does not implement interface &2
007	Method &1 is not declared "public"
008	Parameter &1 does not exist
009	Field &1 and parameter &2 are incompatible
010	Input parameters must be assigned to fields of source structure
011	Output parameters must be assigned to fields of the target structure
012	Structure &1 is not assigned to step &2
013	TWUF_TR_C:No entry for mapping &1 step &2 context &3 trans. key &4
014	Predecessor transformation &1 must be before current transformation &2
015	Specify structure and field or a fixed value
016	If you set a fixed value, the structure and field must be empty
017	Specify a field
018	No structure was specified
019	Fixed values are only allowed for input parameters
020	Table TWUF_TRP: No entry for application &1 step &2 trans. &3 paramtr &4
021	Mapping &1 does not exist
022	Table TWUF_TRCP: No entry for application &1 step &2 trans. &3 param. &4
023	Entries, for which depend. Customizing exists, are not deleted
024	TWUF_TRP_C: No entry for application &1 step &2 trans. &3 param. &4
025	TWUF_TRCP_C: No entry for application &1 step &2 trans. &3 param. &4
027	Context &1 does not exist
031	TWUF_MAPPING: No entry for application &1 step &2 trans. &3 counter &4
032	TWUF_MAPPING_C: No entry for application &1 step &2 trans. &3 counter &4
033	Entry &1 does not contain transformation method
034	Field mappings cannot be combined with transformation methods
035	Transformation class and indicator field mappings are initial
036	An internal error has occurred
037	Transformation &1 does not exist
038	Structure &1 is not assigned to the current step
039	An initial context is not allowed
040	Value &1 of field &2-&3 is not transferrable to numeric field &4
041	Overrun: Value &1 of field &2-&3 is not transferrable to field &4
042	Method &1 is not static
043	Method &1 does not contain export parameter "e_ok"
044	Method &1 does not contain import parameter "i_prefetch"
045	Technical SAP Customizing, a change is a modification
046	Trans. key &1 is not possible
047	Customizing error: Field &1 not contained in structure &2
048	Data loss on copying of &1 to &2: Source &3, target &4
049	Error on call-up of class &1 for simple field transformation
050	Error on call-up of method &1 of transformation class &2
051	Error on copying of &1 to &2: Input value &3
052	Error in conversion routine &1
053	Only set one of fields "Fixed Value", "Initial" or "Field Check Class"
054	Set one of fields "Fixed Value", "Initial" or "Field Check Class"
055	TWUF_CHECK: No entry for mapping &1 step &2 counter &3
056	TWUF_CHECK_C: No entry for mapping &1 step &2 counter &3 context &4
057	Field check: Field &1 of structure &2 is not initial but &3
058	Field check: Field &1 of structure &2 has not fixed value &3 but &4
059	Error on call-up of class &1 for field checks
060	Field check: Field check class &1 provides error for &2-&3 with value &4
061	Target key structure &1 does not exist
062	Conversion error on setting of change field &1, value = &2
063	Error on copying of &1 to &2: &3 may contain only digits
064	Error on copying of &1 to &2: &3 is not a valid date
065	Error locking the view cluster
066	Error on copying of &1 to &2: Data loss source = &3 target = &4
067	Error on copying of &1 to &2: Target already filled with &4, source = &3
068	Change structure &1 does not exist
069	Target structure &1 does not exist
070	Transformation method &1=>&2: Target field &3 already filled with &4
071	Call-up error Execute: Parameter &1 must be of type &2 and not &3
072	Call-up error Execute: Parameter &1 was not supplied
073	Error on call-up of transformation method &1 of class &2
074	Entry field is &1 with value &2
075	Target field is &1
076	Include change field &1 in the target key
077	Method &1 of class &2 has no parameter &3
078	Type of parameter &1 is not supported
079	Parameters of type data reference cannot be combined with fixed values
080	Parameter "e_ok" must be declared as an export parameter
081	Parameter "i_prefetch" must be declared as an import parameter
082	Parameter "e_ok" must be of type "wuf_boolean"
083	Parameter "i_prefetch" must be of type "wuf_boolean"
084	&1 is not a valid date
085	&1 is not a valid timestamp
086	Not all required entry fields were sent. Method: &1-&2
087	Method: &1, Not all required entry parameters were assigned a field
088	Structure &1 does not exist
089	Class &1 contains a syntax error
090	Log-on language &1 differs from the original language &2
091	Step &1 transformation &2: Double call-up sequence &3
092	Step &1 transformation &2 context &3: Double call-up sequence &4
093	An initial step is not allowed
094	An initial transformation is not allowed
095	An initial mapping is not allowed
096	An initial package group is not allowed
097	Parameter &1 may not be assigned to any field
098	Method &1:Transformation methods may not contain parameter E_OK
099	&1 is not a structure
100	Class &1 not contained in container
101	Container contains no entry in position &1
102	Entry already exists in database
103	No entry in table TSMT_VARIANT for mapping &1 variant &2
104	Error inserting into table &1
105	Error updating table &1
106	Error deleting in table &1
107	Variant is not in change mode
108	Variant was already deleted
109	Enter a value
110	Variant &1 is not assigned to step &2
111	Structure &1 was specified more than once
112	Report &1 cannot be inserted in repository
113	No report could be inserted in repository
114	Source line of a report contains more than 255 characters
115	Context "DEFAULT" is reserved
116	Mapping &1 supports only context "DEFAULT"
117	Mapping &1 does not support multiple contexts
118	Local class &1 cannot be generated
119	Generation error: Mapping &1 step &2 version &3 extension &4
120	No buffer entry: Mapping &1 step &2 version &3 extension &4
121	No entry gyy_cat_root_c: Applic. &1 step &2 version &3 tool version &4
122	No entry gyy_cat_root: Application &1 step &2 version &3 extension &4
123	No catalog entry: Mapping &1 step &2 version &3 extension &4
124	Tool version &1 object category &2 transformation number &3 context &4
125	Tool Version &1
126	No parameter assignment exists for parameter &1
127	Entry gyy_cat_root_c exist.: Applicatn &1 step &2 vers. &3 tool vers. &4
128	Entry gyy_cat_root exist.: Applictn &1 step &2 vers. &3 extension &4
129	Generation error (client-dependent): Mapping &1 step &2 version &3
130	No customer extension for mapping &1 and step &2
131	Extension &1 does not exist
132	Table TWUF_TR_EXT: No entry for extension &1 trans. key &2
133	Table TWUF_TRP_EXT: No entry for extension &1 trans. &2 parameter &3
134	Table TWUF_TRCP_EXT: No entry for extension &1 trans. &2 parameter &3
135	TWUF_MAPPING_EXT: No entry for extension &1 trans. &2 counter &3
136	TWUF_CHECK_EXT: No entry for extension &1 counter &2
137	E071: Order &4 PGMID: &1 OBJECT: &2 OBJ_NAME: &3
138	No TADIR entry could be written for report &1
139	You have no authorization for this action
140	An initial extension ID is not allowed
141	Report could not be generated due to a syntax error
142	Message text: &1&2&3&4
143	Line &1, incorrect token &2&3&4
144	&1&2&3&4
145	The specified file contains no mappings
146	An error has occurred. Nothing was changed
147	A variable with incorrect category was assigned to parameter &1
148	Root version &1
149	Parameter &1 was not transferred
150	Parameter &1 is not defined in Customizing of the mapping step
151	Error for mapping &1 step &2
152	Method PREFETCH may only be called in PREFETCH mode
153	Method EXECUTE may not be called in PREFETCH mode
154	Select either "Delete All" or Step
155	Parameter I_DATA1 and I_DATA2 must have the same type
156	Only letters and the special character "_" are allowed for mappings
157	&1 is an interface, not a class
158	Fixed value &1 contains quotation marks
159	Error location: &1&2&3&4