UPB - BPS: Meldungen der Bilanzplanung
The following messages are stored in message class UPB: BPS: Meldungen der Bilanzplanung.
It is part of development package UPBPM in software component BW-PLA-BPS. This development package consists of objects that can be grouped under "Planning Folders".
It is part of development package UPBPM in software component BW-PLA-BPS. This development package consists of objects that can be grouped under "Planning Folders".
Message Nr ▲ | Message Text |
|---|---|
| 001 | &1 &2 &3 &4 |
| 002 | Area was not found - set first |
| 003 | DDIC error |
| 004 | Error when reading the field catalog |
| 005 | Error in ALV |
| 006 | Database access error |
| 007 | Error in internal processing |
| 033 | For &1, planning area &2 is set |
| 050 | Error in target system &1 |
| 051 | Error in RFC for destination &1 |
| 052 | Select a line |
| 060 | Settings were deleted for user &1 |
| 061 | Settings were deleted for all users |
| 070 | Field &1 must be deleted from the parameter group |
| 080 | * Accumulate balances |
| 081 | Complete the selection of fiscal year variant and year |
| 082 | Restrict the selected time characteristic to an interval |
| 083 | Enter a package selection for the calendar year |
| 100 | This function is blocked at present. |
| 101 | Structure &1 could not be read. |
| 120 | Characteristic &4 (&3) is not restricted to a single value |
| 121 | Planning function type &1 is not supported |
| 122 | Characteristic &4 (&3) is not restricted to a single value |
| 139 | No selection condition is entered for time characteristic &1 (&2) |
| 140 | No internal interest rate could be determined |
| 141 | No unique internal interest rate could be determined |
| 142 | A negative internal interest rate was determined |
| 143 | An internal error occurred when calculating the internal interest rate |
| 144 | Empty |
| 149 | At least one source posting is incompletely maintained for field &1 |
| 150 | No target update maintained for &3 &1 |
| 151 | &3 &1 occurs as source and as target |
| 152 | No source update maintained for &3 &1 |
| 153 | &3 &1 is maintained more than once as a source |
| 154 | Sum-of-the-years-digits mthd of depr. only supported in yearly per. split |
| 155 | No percentage is entered for yearly depreciation |
| 156 | No income statement item is entered for depreciation |
| 157 | No financial statement item is entered for depreciation |
| 158 | No item is entered for revenues |
| 159 | An upper limit, but no lower limit is entered for the range |
| 160 | The field key figure name is not maintained as condition field. |
| 161 | No item is entered for expenditure |
| 162 | No statisical item is entered |
| 163 | No conventional interest rate is entered |
| 164 | No item is entered for cash flow |
| 165 | Only preceding rows of key figure scheme are allowed as reference rows |
| 166 | No evaluation element is specified in row &1 of key figure scheme |
| 167 | No reference element is specified in row &1 of key figure scheme |
| 168 | No reference row is specified in row &1 of key figure scheme |
| 169 | No reference level is specified in row &1 of key figure scheme |
| 170 | Items for input and output are the same |
| 171 | Items for output are the same |
| 200 | Component &1 is not contained in current data record |
| 201 | Depreciation method &1 is not supported |
| 210 | No basic characteristic could be found for characteristic &1 |
| 300 | Technical name is already assigned for the planning folder |
| 301 | Technical name does not correspond to the naming convention |
| 302 | Layout of planning object &1 contains open header characteristics |
| 303 | Planning folder is consistent |
| 304 | Planning folder was not saved |
| 305 | Planning folder was saved |
| 306 | Only planning functions and sequences could be executed |
| 307 | Planning object is not available in planning folder |
| 308 | Only layouts can be displayed |
| 309 | Planning folder does not exist |
| 310 | Select a planning folder |
| 311 | Planning book name is already assigned |
| 312 | Layout &1 contains more than one function for exec. before layout output |
| 313 | Layout &1 contains more than one function for execution after entry |
| 314 | Global planning functions can only be used as "pushbutton" |
| 315 | The last one is saved as the default folder |
| 316 | Folder &1 is set as default folder |
| 317 | Sorting the planning folders was saved |
| 318 | Undo &1(&2) |
| 319 | &1(&2) was undone |
| 320 | There are no planning folders |
| 321 | Technical name &1 has already been used |
| 322 | There is no comment for planning folder &1 |
| 323 | Undo automatic planning function for layout &1(&2) |
| 324 | Automatic planning function for layout &1(&2) was undone |
| 325 | Messages are available in the log (F9) |
| 326 | &1(&2) was executed |
| 327 | Automatic function "&1(&2)" was executed for layout "&3(&4)" |
| 328 | Data was saved |
| 329 | All specific settings of folder &1 were undone |
| 330 | Error in &1, global planning sequence &2 is not consistent |
| 331 | Error in &1, package &2 is incorrect or deleted |
| 332 | Error in &1, parameter group &2 is no longer available |
| 333 | Error in &1, layout &2 is incorrect or deleted |
| 334 | Error in &1, planning sequence &2 is not consistent |
| 335 | Error in &1, planning function &2 is no longer available |
| 336 | Error in &1, level &2 is incorrect or deleted |
| 337 | Error in &1, header characteristic &2 is not unique in layout |
| 338 | Variable &1 (area &2) is no longer available |
| 339 | Variable &1 (area &2) is not necessarily always unique |
| 340 | In level &3 (object &4) variable &1 (area &2) is missing |
| 341 | Object &4, layout &3: Variable &1 available in other layouts is missing |
| 342 | MS Excel is set up as display tool for layout &2 in &1 |
| 343 | Characteristic &3 is not clearly restricted in the planning folder |
| 344 | Value &1 of variables &2 is not contained in area &3 |
| 345 | Planning folder contains no input layout |
| 346 | Planning folder contains no ouput layout |
| 347 | Planning folder contains &1 layouts. A maximum of &2 are possible |
| 348 | Planning folder was not saved |
| 349 | Planning folder is incorrect, not possible to save |
| 350 | Planning folder is not consistent |
| 351 | Executing the planning folder is terminated |
| 352 | Variable &1 is already used in the planning folder |
| 353 | Selection of variables in the folder is complete |
| 354 | Characteristic &3 of variable &1(&2) does not appear in any used level |
| 355 | Selection of &1 is invalid |
| 356 | Folder &1 cannot be executed in the Web. Export not possible |
| 357 | Folder &1 must be saved first |
| 358 | No messages exist |
| 359 | Error in &1: |
| 360 | Make an entry in all required fields |
| 361 | In &1 and &2, characteristic &3 is selected differently in header area |
| 362 | Characteristic &1 (area &2) is not used in all header areas |
| 363 | Select a package and a parameter group |
| 364 | Parameter group does not match the package selected |
| 365 | No valid target entry is selected |
| 366 | Global planning sequences can cause cross-area changes |
| 367 | A layout can only be moved into the input or output folder |
| 368 | A function cannot be used as a layout |
| 369 | Planning environment cannot be started |
| 370 | You have no authorization to display planning folder &1 |
| 371 | You have no authorization to change planning folder &1 |
| 372 | You have no authorization to execute planning folder &1 |
| 373 | You have no transport authorization for planning folder &1 |
| 374 | Authorization check could not be executed |
| 375 | This function is only executable in change mode |
| 376 | No objects can be selected in set profile &1 |
| 377 | Last planning function was undone |
| 378 | Export was not performed |
| 379 | Web interface &1 was created on the basis of folder &2 |
| 380 | Reconversion is not always possible in an internal format |
| 381 | Select a planning folder |
| 382 | Search was unsuccessful |
| 383 | Enter a valid folder type |
| 384 | Select at least one line first |
| 385 | You do not have any authorization to display planning folders |
| 386 | You do not have any authorization to change planning folders |
| 387 | You do not have any authorization to execute planning folders |
| 388 | You do not have any transport authorization for planning folders |
| 389 | Operation cannot be executed here |
| 390 | Application can be a maximum of 15 characters long and start with A..Z |
| 391 | No planning folders were yet created for planning profile &1 |
| 392 | No planning folders were yet created for main planning area &1 |
| 393 | Planning folder &1 is not yet translated into language &2 |
| 394 | Command &1 does not exist |
| 395 | Planning folder &1 is not available |
| 396 | Planning folder name &1 is already assigned |
| 397 | Enter a planning folder name |
| 398 | Area &1 is not available |
| 399 | Data could not be saved |
| 400 | Characteristic &1 does not exist in the planning level |
| 401 | Key figure &1 does not exist in the planning level |
| 402 | Field &1 must be selected as a condition field |
| 403 | Specify &1 |
| 450 | No transaction data is available to planning area &1 |
| 451 | Characteristic &1 is not contained in planning area &2 |
| 452 | InfoObject &1 is not contained in the planning area |
| 453 | InfoObject &1 was changed (other technical attributes) |
| 454 | InfoObject &1 is not contained in the delivered planning area |
| 455 | No master data is available for characteristic &1 |
| 456 | Characteristic &1 is not contained in the planning area |
| 457 | Characteristic &1 was changed (other technical attributes) |
| 458 | Parameter I_MODE must be set to 'N'ew or 'A'll |
| 459 | Characteristic &1 was changed (other componding) |
| 460 | Characteristic &1 was changed (other attributes) |
| 461 | No metadata is available for InfoCube &1 |
| 462 | No data found |
| 463 | Hierarchy &1 on characteristic &2 is not available |
| 464 | &2 data records were successfully imported for planning area &1 |
| 465 | &2 characteristic values were successfully imported for characteristic &1 |
| 466 | Hierarchy &1 on characteristic &2 was successfully imported |
| 467 | &2 data records were successfully exported for planning area &1 |
| 468 | &2 characteristic values were successfully exported for characteristic &1 |
| 469 | Hierarchy &1 on characteristic &2 was successfully exported |
| 470 | Data on planning area &1 not transferred at user's request |
| 471 | Transport entries were generated for the data on planning area &1 |
| 472 | Transport entries were generated for the master data on characteristic &1 |
| 473 | Transport entries were generated for hierarchy &1 on characteristic &2 |
| 500 | Application &1 is unknown |
| 502 | Error when deleting entries in table &1 |
| 503 | Error when inserting entries in table &1 |
| 504 | For application &1, no attributes area available for area &2 |
| 505 | No planning area is set for application &1 |
| 506 | For application &1, no planning area is set for user &2 |
| 507 | An empty table cannot be processed |
| 508 | Planning area &1 is not contained in the profile of user &2 |
| 525 | Errors in combination check |
| 550 | No further ALV instance could be generated (max. &1). |
| 570 | No hierarchies available |
| 605 | Plan function does not exist. |
| 606 | Target must be different from source. |
| 607 | The sum of the distribution percentages does not amount to 100% |
| 608 | At least one percentage is negative or 0. |
| 609 | Field key figure name is not selected for condition fields |
| 610 | Error in package selection for time characteristic. |
| 611 | Calculated time characteristic not in interval of package selection. |
| 613 | Characteristic value is invalid |
| 614 | Internal inconsistency for calculation characteristic |
| 616 | Key figure name cannot be removed as field for conditions |
| 650 | No objects were selected |
| 651 | Display processing type: No transport request was generated |
| 652 | For planning area &1, &2 data records were found |
| 653 | No master data could be selected for characteristic &1 |
| 654 | For characteristic &1, &2 characteristic values were found in language &3 |
| 655 | First select a planning area |
| 656 | Display processing type: No data was imported |
| 657 | Import completed successfully |
| 658 | Error during import. See long text |
| 670 | Inconsistency in Customizing of Planning Function &1 (-> Long Text) |
| 671 | Error in internal processing. No further processing possible |
| 672 | Error in generated report &1. No further processing possible |
| 700 | Maintain row completely |
| 701 | Application &1 has no subclass &2 (maintain V_UPB_IA_SUBCL) |
| 702 | Enter a language |
| 710 | Characteristic value &1 (&2) outside selection of planning level |
| 711 | No value is entered for characteristic &1 in questionnaire |
| 712 | Planning level &2 area &1 was changed. Not possible to regenerate |
| 713 | Characteristic value &3 (&2) not in range of variables &1 |
| 714 | Data could not be saved |
| 715 | Class regenerated (level &2 area &1). Adjust survey |
| 730 | Enter a sender structure |
| 731 | Calendar day selection invalid |
| 732 | Enter a time characteristic |
| 733 | Field &1 does not exist in structure |
| 734 | Error in &1: &2; &3 |
| 735 | Company code is empty |
| 736 | Date is empty |
| 737 | Some time characteristics must stay in field list |
| 750 | Class for planning level &2 of area &1 was generated |
| 751 | Class for planning level &2 of area &1 was not generated |
| 752 | Class not transportable, not generated yet (area &1, level &2) |
| 753 | Class for planning level &2 of area &1 was deleted |
| 770 | Select at least one planning application or area |
| 771 | Either select the local system or a RFC destination |
| 772 | You have no authorization to change the planning area |
| 773 | BW installation has changed for &1 planning areas |
| 800 | Automatic planning function "&1(&2)" was executed |
| 801 | &1&2&3&4 |
| 802 | &1 is not in area of lead columns from &2/&3/&4 |
| 803 | XML Customizing is incorrect (parser error: &1) |
| 804 | Element &1 is missing in Customizing |
| 810 | Customizing of planning folder &1 not possible |
| 811 | Planning folder &1 does not exist as preceding list entry |
| 812 | Planning folders of application class &1 cannot contain any variables |
| 813 | Area &1 cannot be used |
| 814 | Folder type &1 cannot be used in application class &2 |
| 815 | Incorrect names for application class &1, planning folder &2 |
| 816 | Customizing of folder was adjusted |
| 817 | Incorrect name for planning object &1 |
| 818 | Planning object is missing |
| 819 | Error in Customizing of planning object &1 |