UPF - Planungsfunktionen
The following messages are stored in message class UPF: Planungsfunktionen.
It is part of development package UPF in software component BW-PLA-BPS. This development package consists of objects that can be grouped under "SEM-BPS: Planning Functions".
It is part of development package UPF in software component BW-PLA-BPS. This development package consists of objects that can be grouped under "SEM-BPS: Planning Functions".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Number of periods for ex-post forecast was set to &1 |
| 001 | &1 &2 &3 &4 |
| 002 | Select fields to set new values |
| 003 | A planning function with this technical name already exists |
| 004 | A parameter group with this technical name already exists |
| 005 | Function not intended for variables with offset specification |
| 006 | Enter the parameter without any blank characters |
| 007 | Enter a data element without any blank characters |
| 008 | Enter a valid parameter group: &1 &2 does not exist |
| 009 | Enter a valid data element |
| 010 | Data element &1 for parameter &2 cannot be read |
| 011 | Enter a planning function |
| 012 | Enter a parameter group |
| 013 | Field &1 is still being used in the conditions for parameter group &2 |
| 014 | Field &1 is still being used in the field values for parameter group &2 |
| 015 | Field &1 still used in the reference conditions for parameter group &2 |
| 016 | No input help is available |
| 017 | Key figure &1 is not included in the planning level |
| 018 | Parameter group &1 was deleted |
| 019 | Planning function &1 was deleted |
| 020 | The forecast strategy for method &1 cannot be determined |
| 021 | The time characteristic for method &1 cannot be determined |
| 022 | Field &1 can no longer be selected |
| 023 | Parameter group &1 &2 does not exist |
| 024 | Planning function &1 does not exist |
| 025 | Maintain the reference values of parameter group &1 for planning func. &2 |
| 026 | Enter a valid function module |
| 027 | You must specify the fields to be changed for planning function &1 |
| 028 | Compound field &1 does not exist in planning level &2 |
| 029 | Enter a description |
| 030 | The function module for the Exit function &1 does not exist |
| 031 | Entries were copied |
| 032 | Planning sequence cannot call itself up |
| 033 | Only enter global planning sequence or alternative planning function |
| 034 | No selection condition exists for time characteristic &1 |
| 035 | No selection condition exists for the forecast time period |
| 036 | You must select a time characteristic for forecast method &1 |
| 037 | Select a valid time characteristic |
| 038 | The time characteristic is included with the reference characteristics |
| 039 | The time characteristic may not be selected for conditions |
| 040 | Planning sequence &1 is defined recursively |
| 041 | Characteristic &1 must be restricted to a single value |
| 042 | Enter either a single value or an interval |
| 043 | No distribution keys are maintained |
| 044 | Function module &1 for the initialization does not exist |
| 045 | Parameter group &1 could not be initialized |
| 046 | Formula error: { expected |
| 047 | Formula error: } expected |
| 049 | The formula definition is correct |
| 050 | Syntax error: The formula is empty |
| 051 | Error in formula definition |
| 052 | Formula error: The formula ends unexpectedly |
| 053 | Formula error: Variable expected |
| 054 | Formula error: Type of characteristic expected |
| 055 | Formula error: Operand is missing |
| 056 | Formula error: Identifier expected instead of &1 |
| 057 | Formula error: Types of operands &1 and &2 do not agree |
| 058 | Formula error: Formula element &1 could not be recognized |
| 059 | An arithmetical error occurred during the calculation of &1 |
| 060 | Characteristic &1 must be set to single values |
| 061 | Formula error: Assignment sign '=' expected |
| 062 | Formula error: Characteristic-dependent operand expected instead of &1 |
| 063 | &1 is invalid, since only digits are allowed |
| 064 | &1 is invalid, replace blank characters with 0 |
| 065 | Overflow occurred when converting &1 |
| 066 | Line cannot be deleted |
| 067 | Planning function does not exist in the database |
| 068 | Parameter group does not exist in the database |
| 069 | Enter a parameter name |
| 070 | Field &1 must be deleted from the conditions |
| 071 | Field &1 must be deleted from the parameter group |
| 072 | A time characteristic must be maintained for planning level &1 |
| 073 | Formulas still exist and will become syntactically incorrect |
| 074 | Enter a valid combination of table/field name |
| 075 | Planning sequence &1 was deleted |
| 076 | No rules are maintained for the processing of conditions |
| 077 | No formulas are maintained for conditions |
| 078 | No conditions are maintained for processing rules |
| 079 | No conditions have yet been maintained for formulas |
| 080 | Time characteristic will be deleted from those chars to be changed |
| 081 | Planning sequence &1 does not exist |
| 082 | Select a maximum of 8 fields |
| 083 | No reference data exists |
| 084 | Printing completed |
| 085 | Formula error: &1 was expected |
| 086 | Variable &1 must have the type of a field to be changed |
| 087 | Formula error: Variable name was expected |
| 088 | Formula error: Variable name &1 is not allowed |
| 089 | Formula error: Type name was expected |
| 090 | Formula error: Type &1 is not permitted |
| 091 | Formula error: Variable name &1 is already declared |
| 092 | Formula error: invalid MESSAGE instruction |
| 093 | Formula error: Variable must be type &1 |
| 094 | Formula error: relational operator expected |
| 095 | Value of field &1 cannot be determined |
| 096 | Variable &1 is not restricted to a single value |
| 097 | Variable &1 is not suitable for setting field values |
| 098 | Conditions were added artificially - check |
| 099 | TMVL function only works for time characteristics contained |
| 100 | Enter valid target key figure |
| 101 | Enter valid source key figure |
| 102 | Enter either target currency or characteristic for target currency |
| 103 | You can only select a date if the time reference is empty |
| 105 | Select either a fixed key date, the current date, or a characteristic |
| 106 | Enter time base |
| 107 | Enter valid characteristic for the time base |
| 108 | Select appropriate characteristic |
| 109 | Enter valid target key figure |
| 110 | The target currency is already defined |
| 111 | The currency field &1 is invalid |
| 112 | The target unit is predefined |
| 113 | Set either a target unit or a characteristic for a target unit |
| 114 | Enter a valid characteristic for the target unit |
| 115 | Specify exchange rate type |
| 116 | You can only choose the current date when the time reference is empty |
| 117 | The characteristic for determining the translation date is initial |
| 118 | Time reference &1 does not match the planning level characteristics |
| 120 | Target key figure &1 is invalid |
| 121 | From key figure &1 does not exist |
| 122 | Characteristic &1 for the source unit is invalid |
| 123 | The characteristic for the target currency &1 is not valid |
| 124 | A planning sequence with this name already exists |
| 125 | Enter the planning function and the parameter group |
| 126 | Enter the planning area |
| 127 | Enter the planning level |
| 128 | Enter the planning package |
| 129 | You cannot use any variables for this field |
| 130 | Variable must be of type &1 |
| 131 | Processing rules still exist, delete them |
| 132 | Formulas still exist, delete them |
| 133 | An ad hoc parameter group is not planned for this function type |
| 134 | No data available for printing |
| 135 | No hierarchy node input can be used for this field |
| 136 | Select a type for the function |
| 137 | Only variables with a characteristic are allowed to be used here |
| 138 | Characteristic &1 is not available |
| 139 | Also enter variable &1 in characteristic &2 |
| 140 | First delete the selection conditions |
| 141 | You cannot select using attributes for this field |
| 142 | Errors were discovered! Incorrect errors were deleted |
| 143 | Formula error: Type &1 is not allowed for the function |
| 144 | Argument &1 must contain the type of a higher-level characteristic |
| 145 | A comma and other arguments were expected instead of &1 |
| 146 | Function &1 delivers a result of type &2 |
| 147 | Characteristic &1 is not supported |
| 148 | Syntax error: Value 'E'nd or 'S'tart value were expected |
| 149 | Combination time characteristic &1 and parameter &2 is not supported |
| 150 | Syntax error: Date or variable expected |
| 151 | No fields are defined which are derived |
| 152 | Level &1 is unsuitable for the planning function |
| 153 | Error with function &1 access with offset &2 number of values &3 |
| 154 | Incorrect index &1 with function &2 |
| 155 | Check the parameter groups |
| 156 | Check the definition of the planning function |
| 157 | Generation error in program &1 |
| 158 | Characteristic &1 does not exist in planning level &2 |
| 159 | Copying not possible: Method &1 not available |
| 160 | No variables of type F, I or P are allowed as an argument |
| 161 | Only variables or type I or digits are allowed as an argument |
| 162 | Syntax error: Type &2 is not permitted for operator &1 |
| 163 | Error in function TMVL for value &1 and offset &2 |
| 164 | Variable &1 is not of the correct type |
| 165 | Overflow occurred when calculating &1 with value &2 |
| 166 | Formula error; number has to be between 0 and 9 |
| 167 | Overflow when formula is executed |
| 168 | Cannot find function module &1 |
| 169 | Exception: &1 |
| 170 | Formula error; cannot fill parameter &1 |
| 171 | Type &2 of parameter &1 is invalid |
| 172 | Types of parameter &1 (&2) and variable &3(&4) are inconsistent |
| 173 | Length of parameter &1(&2) and variable &3(&4) are inconsistent |
| 174 | Enter function module &1 in table RSPLF_FDIR |
| 175 | Function &1 does not support numeric data types as result |
| 200 | Incorrect formula element: &1 |
| 201 | Formula error: integer expected instead of &1 |
| 202 | Formula error; characteristic name expected |
| 203 | Formula error; &1 characteristic can only be used once |
| 250 | Searching for partitioning characteristic |
| 251 | Characteristic &1 cannot be used for partitioning |
| 252 | Characteristic &1 has &2 values in accordance with selection condition |
| 253 | &1 chosen as partitioning characteristic (&2 partitions) |
| 254 | No partitioning characteristic exists |
| 255 | Selection for &1: &2 |
| 500 | No value to be distributed exists for this parameter selection |
| 501 | Create distribution factor |
| 502 | No value exists for reference key figure &1 |
| 503 | Sequence &1 was executed for characteristic value &2 |
| 504 | Planning sequence was executed for &1 values |
| 505 | Characteristic &1 is not available |
| 506 | No higher-level compound characteristics exist |
| 507 | Specify a from value |
| 508 | Specify a to value |
| 509 | Compound characteristic &1 is missing from variable &2 |
| 510 | Only ad hoc packages can be used in the planning sequence |
| 511 | Specify a variable for the values of the compound characteristics |
| 512 | Characteristic &1 must be ready for input in package &2 |
| 530 | Only variables of type characteristic value are permitted |
| 600 | Number of periods for ex-post forecast was set to 1 |
| 601 | File does not exist, cannot be opened |
| 602 | Error reading file |
| 603 | Front end function cannot be executed in batch |
| 604 | Incorrect front end, or error in front end |
| 605 | Incorrect parameter FILETYPE |
| 606 | No upload authorization |
| 607 | Unknown error |
| 608 | Cannot interpret data in file |
| 609 | Header not allowed |
| 610 | Separator not allowed |
| 611 | Header information is set to a maximum of 1023 bytes |
| 612 | Error calling data provider |
| 613 | Access to file not allowed |
| 614 | Not enough memory available in data provider |
| 615 | Storage medium is full |
| 616 | Timeout of data provider |
| 617 | GUI does not support this |
| 618 | GUI is not available |
| 619 | Other error |
| 620 | FILE_OPEN_DIALOG_FAILED |
| 621 | Control error |
| 622 | No GUI available |
| 623 | GUI does not support this |
| 624 | Runtime error CONVT_OVERFLOW was caught |
| 625 | Number of periods for ex-post forecast was set to &1 |
| 626 | Interval length to calculate key figures was set to &1 |