/CLMDV/DVF_TEST_SPEC - Message Class for Test Specifications

The following messages are stored in message class /CLMDV/DVF_TEST_SPEC: Message Class for Test Specifications.
It is part of development package /CLMDV/TEST_SPECIFICATION in software component BC-UPG-DVF. This development package consists of objects that can be grouped under "Test Specification".

Message Nr ▲	Message Text
000	Project ID is missing. Enter the ID
001	&1 already exists. Choose a different ID
002	&1 does not exist. Check and enter the correct project ID.
003	Project &1 copied with the initial status.Review the steps to proceed.
004	Project &1 is renamed as &2
005	Project &1 data deleted successfully
006	Invalid operation. Choose a valid operation
007	&1 is an invalid entry. Enter project ID with no space(s).
008	Project &1 saved
009	Project ID is too long. Enter maximum of 35 characters.
010	Save failed. System &1 and system &2 are same.OR Save failed. From System
011	Save failed. Remove the empty line.
012	Data saved successfully
013	Enter high values for range conditions, such as BT and NB.
014	Split condition is valid
015	Invalid split. Narrow down the selection
016	Valid split. Performance issue may occur
017	System error. Check the table or report name.
018	System name missing.
019	Duplicate system ID found.
020	Select a system from the drop-down list.
021	System ID must have alpha-numeric characters.
022	Table name is missing.
023	Table name must have alpha-numeric characters.
024	Duplicate table name found.
025	Maintain all field values.
026	System &1 and System &2 are same. Change the system and save.
027	Space, special character not allowed. Underscore allowed. Change and save
028	Project locked by another session. You cannot make the changes now.
029	Field &1 is initial. Enter a value
030	Invalid characters for field &1. Enter alpha-numeric charecters only and
031	Field &1 exceeds character limit. Emter maximum of &2 characters.
032	Error while creating container
033	Simulation started. Refresh to check the simulation status
034	Simulation completed
035	Invalid report name &1
036	Extraction started in background. Refresh to check latest status.
037	Extraction data has been reset successfully.
038	Extraction completed successfully.
039	All running jobs have been cancelled.
040	Restart process sstarted in backgorund. Refresh to check latest status.
041	Re-extraction started for selected items. Refresh to check latest status.
042	Old name &1 and new name &2 in Report Header cannot be the same.
043	Save Rejected. Maintain a value for mandatory parameter Output Type.
044	RFC does not exist
045	Duplicate object name found
046	Duplicate object mapping found
047	Item data without header data cannot be saved
048	Select system from dropdown.
049	Invalid variant name
050	Test Specification does not exist
051	Parameter name &1 incorrect
052	Data Upload Successful.
053	Simulation is either in progress or completed. Reset to re-simulate.
054	Simulation has either been completed or not started.
055	Simulation is either in progress or has not been started.
056	No authorization
057	Error during authority check
058	You have display authorization
059	Extraction results exists for &1. Click Re-run to execute again.
060	Selected test specification is not run or In Progress. Reset not allowed.
061	Only test specifications in 'In Progress' can be cancelled.
062	Only test specifications in 'Failed' or 'Cancelled' can be resumed.
063	One or more test specification(s) is not run. Check and Re-Run again.
064	No authorization for implemention
065	No authorization for execution
066	Connection error at remote system &1 (RFC-ID: &2)
067	Missing authorization in remote system &1 (RFC-ID: &2)
068	Lock for synchronous reset cannot be acquired.
069	Not all nodes could be reset
070	Workitem &1 already exists
071	Error during authority check in remote system &1 (RFC-ID: &2)
072	Error during writing result data
073	Cancelled by user
074	Evaluation results exists for &1. Click Re-run to execute again.
075	Action cancelled by user
076	Invalid systems in the test specification
077	Select a Pre-delivered Content for Import.
078	Import Completed.
079	For already imported content, a new test specification will be created.
080	Evaluation cannot be executed for more than two systems
081	Save Rejected. Name missing.
082	Save rejected. Maintain &1 in &2.
083	Maintain systems in the project
084	Maintain system role
085	Duplicate object name found.
086	Status of Step changed to &1.
087	Maintain only one value - either executing server or executing group
088	Extraction is still in progress. Wait for completion.
089	Enter valid executing group
090	Enter valid executing server
091	Table name must contain alpha numeric characters
092	For Equals, there should be no high value.
093	Change(s) here could affect the test specification consistency.
094	Duplicate entry found in &1.
095	Old Value &1 and New Value &2 in Object Value Mapping cannot be the same.
096	Select a table name to fetch table attributes
097	Select a test specification
098	For report &1, system &2 conditions will be ignored since it has variant.
099	Name missing. Enter a project name.
100	Maintain systems in Read mode
101	Maintain systems in write mode
102	Table analysis in write mode
103	Table analysis in read mode
104	Maintain rules and filter in write mode
105	Maintain rules and filter in read mode
106	Pre delivered content in write mode
107	Pre delivered content in read mode
108	Project global data in write mode
109	Project global data in read mode
110	Define test specification in write mode
111	Define test specification in read mode
112	Execute data extraction in write mode
113	Execute data extraction in read mode
114	Evaluate data in write mode
115	Evaluate data in read mode
116	Summary in write mode
117	Summary in read mode
118	Manage project in write mode
119	Manage project in read mode
120	Refresh to check the simulation status
121	Simulation error. Check simulation results.
122	Changes to the test specification will affect the simulation results.
123	All the subsequent steps would be marked to InProgress.
124	Evaluation started in background. Refresh to check latest status.
125	Only executable nodes can be processed.
126	Extraction data reset and simulation results are shown.
127	Project &1 is created. Review the steps to proceed.
128	Project &1 is set to default.
129	Table &1 doesn't exist.
130	Caution: Import XML overwrites the existing content.
131	Save rejected. For &1, maintain &2 in &3.
132	For &1, &2 contains special characters in &3. Change and save.
133	Simulation reset.
134	Simulation has not been started.
135	System date is not greater than date retention
136	Project deletion not possible for this status
137	Project deleted successfully
138	Re-evaluation started for selected items. Refresh to check latest status.
139	Date can not be before project creation date
140	Select a file
141	Project copied successfully
142	Project not copied
143	Project not deleted
144	Project deleted successfully
145	Project deletion not possible for this status
146	Extracted data deleted successfully
147	File downloaded successfully
148	File imported successfully
149	System is locked
150	Only successfully finished simulation results can be imported
151	Passed : Valid selection
152	Failed : Check logs
153	Passed : Reconsider selection
154	Form can not be genrated
155	Evaluation is still in progress. Wait for completion.
156	Global data missing for &.