/ISDFPS/SYNC - Nachrichten zur ALE Synchronisation von Systemen.
The following messages are stored in message class /ISDFPS/SYNC: Nachrichten zur ALE Synchronisation von Systemen..
It is part of development package /ISDFPS/SYNC in software component IS-DFS-BIT-DIS. This development package consists of objects that can be grouped under "ALE System Synchronization".
It is part of development package /ISDFPS/SYNC in software component IS-DFS-BIT-DIS. This development package consists of objects that can be grouped under "ALE System Synchronization".
Message Nr ▲ | Message Text |
|---|---|
| 000 | OK |
| 001 | Logical system &1 is not configured in table /ISDFPS/ALE_SYS |
| 002 | No status information for system &1 in table /ISDFPS/ALE_STATE |
| 003 | Error updating status information for &1 in /ISDFPS/ALE_STATE |
| 004 | Error occurred when configuring tRFC parameter in RFC destination &1 |
| 005 | Central system &1 found for logical system &2 |
| 006 | Authorization check: &1 |
| 007 | Test for the RFC connection to &1 &2 |
| 008 | Setting system to offline status in relation to &1 |
| 009 | Setting system to online status in relation to &1 |
| 010 | Synchronization with &1 |
| 011 | &1 is not the central system for &2 |
| 012 | Configuration relative to &1 |
| 013 | Define a central system for &1 |
| 014 | Error reading the organizational unit for error handling for &1 |
| 015 | Error reading RFC destination &1 |
| 016 | Send to &1 only; ALE inbound processing will not be started |
| 017 | Starting synchronization report in &1 |
| 018 | &1 - local system is the central system |
| 019 | &1 - local system is not the central system |
| 020 | Could not connect to FTP host &1 |
| 021 | Error while copying the files from &1 |
| 022 | Error while deleting the files from &1 |
| 023 | Error reading directory &1 on &2 |
| 024 | Error &1 executing an FTP command |
| 025 | Error switching to the local transport directory for &1 |
| 026 | Error reading the TMS configuration for &1 |
| 027 | Error in the TMS configuration for &1; TRANSDIR not found |
| 028 | Setting the communication status &2 &3 to &1 |
| 029 | Synchronization with &1 NOT started; local system is central |
| 030 | Offline mode for &1 is set: &2 &3 |
| 031 | Transient transition; renewed synchronization in &1 minutes |
| 032 | Transient transition; problem during JOB_OPEN: &1 |
| 033 | Transient transition; release for job &1 |
| 034 | Transient transition; problem during JOB_CLOSE: &1 |
| 035 | Synchronization with &1 completed |
| 036 | Synchronization with &1 terminated |
| 037 | Evaluating change pointers |
| 038 | Evaluating NAST |
| 039 | Importing import queue for &1 (IMPORT_ALL) |
| 040 | Copying transport files for &1 |
| 041 | No transport files are available for &1 on FTP server &2 |
| 042 | Transport files from &1 copied to local TRANSDIR |
| 043 | Transport files were deleted from transport FTP server &1 |
| 044 | Checking whether transport files are available for &1 |
| 045 | Generic specification <CENTRAL> in called system |
| 046 | Available transport requests: &1 |
| 047 | Slave call; target &1 |
| 048 | Master call; target &1 |
| 049 | Transport files for &1 added to import queue |
| 050 | Error while adding the transport files to the import queue |
| 051 | Setting &1 online in system &2 - OK |
| 052 | Setting &1 online in system &2 - error code: &3 |
| 053 | Setting &1 offline in system &2 - OK |
| 054 | Setting &1 offline in system &2 - error code: &3 |
| 055 | Setting online mode for system &1 - completed |
| 056 | Setting online mode for system &1 - terminated |
| 057 | Setting offline mode for system &1 - terminated |
| 058 | Setting offline mode for system &1 - terminated |
| 059 | Error reading the partner profiles for &1 |
| 060 | Setting the partner profiles for &1 |
| 061 | Setting partner profiles for &1 to "collect" |
| 062 | Setting partner profiles for &1 to "send immediately" |
| 063 | Connection from &1 to &2 interrupted &3 &4 |
| 064 | Could not read counter for transient transition - &1 |
| 065 | Could not set counter to &2 for transient transition - &1 |
| 066 | Testing the network connection for &1 &2 |
| 067 | Error &1 |
| 068 | &1; waiting &2 seconds |
| 069 | Could not reset counter for transient transition - &1 |
| 070 | Status of own system &1 relative to &2: &3 |
| 071 | tRFC queue for &1 not empty after delta O |
| 072 | tRFC queue for &1 is not empty |
| 073 | Counter for transient transition: &1 |
| 074 | Background job |
| 075 | Synchronization report is running for partner system &1 |
| 076 | &1 synchronization is running; do you still want to set system OFFLINE? |
| 077 | Maintain an organizational unit responsible for SYNC |
| 078 | Problem &1 when notifying ORG owner by workflow |
| 079 | Error reading the address data for organizational unit &1 |
| 080 | Transports exist for &1 |
| 081 | Import these transport requests before starting ALE inbound processing |
| 082 | Evaluating ALE status |
| 083 | Send IDocs - priority: &1 |
| 084 | -- Sending (internal loop) priority: &1 - &2 |
| 085 | SYNC termination &1: &2 - &3 |
| 086 | Cannot determine individual configuration in system &1, client &2 |
| 087 | Authorization check &1 |
| 088 | Cancelation by user |
| 089 | Maximum number &1 of synchronization attempts reached for &2 |
| 090 | Messages from &1 |
| 091 | Error while transferring transport files to &1 |
| 092 | No local system found in &1 |
| 093 | Error while importing transport files to &1 |
| 094 | Starting inbound processing in &1; &2 |
| 095 | Could not open application log in &1 |
| 096 | Could not open local application log |
| 097 | Error while reading the object transport priorities (/ISDFPS/ALE_OBJ) |
| 098 | Determining the local system for client &1 |
| 099 | CCMS reporting |
| 100 | Messages |
| 101 | Inbound processing for &1 completed |
| 102 | Inbound processing for &1 terminated |
| 103 | Inbound processing for &1 |
| 104 | Starting ALE inbound processing for &1 |
| 105 | Sending IDocs to &1 |
| 106 | Reading the IDoc and tRFC queue for &1 |
| 107 | Entry &1 not recognized |
| 108 | An error occurred when importing data for RFC destination &1 |
| 109 | tRFC parameter for RFC destination &1 OK |
| 110 | Configuration of tRFC parameter for RFC destination &1 |
| 111 | Entry for RFC destination &1 is locked by another task (SM59) |
| 112 | After RSEOUT00 for prio: &1 |
| 113 | Starting inbound processing for &1 |
| 114 | Starting synchronization with &1 |
| 115 | Check the tRFC queue for &1 as of &2. |
| 116 | Maximum number (&1) of transient sync. starts reached -> OFFLINE status |
| 117 | Carrying out auto reaction for &1. &2 |
| 118 | Error during authorization check for changes to tRFC parameters |
| 119 | Restart &1 tRFC entries for partner system &2 |
| 120 | tRFC queue: &1 IDocs - wait maximum delta O &2 minutes |
| 121 | tRFC queue: &1 IDocs |
| 122 | No network connection to &1 |
| 123 | Synchronization report cannot be started interactively in central system |
| 124 | Start inbound processing for system &1, message type &2 |
| 125 | Start ALE final processing after analyzing the situation |
| 126 | Error &2 while setting ready indicator for ALE inbound from system &1.. |
| 127 | Error &2 while testing whether synchron. is still running for system &1 |
| 128 | Set Inb.P. ready indicator for ALE inbound processing in &1 (IDocs sent) |
| 129 | Not all OK/ready indicators are set for ALE inbound processing |
| 130 | Error while setting the OK indicator for start of ALE inbound processing |
| 131 | Set the OK indicator for start of ALE inbound processing: &1 |
| 132 | Error while reading the OK indicator for start of ALE inbound processing |
| 133 | Error restarting the tRFC queue for partner system &1 |
| 134 | OK indicator for ALE inbound processing: &1 |
| 135 | Ready indicator for ALE inbound processing: &1 |
| 136 | ALE inbound processing will be started independent of OK indicator |
| 137 | Synchronization with &1 is not running (anymore) |
| 138 | OK and ready indicator set -> start ALE inbound processing for &1 |
| 139 | Error during ADD-TO-BUFFER of transports for &1 |
| 140 | Start jobs for ALE final processing for &1, &2, &3, &4 |
| 141 | Problem &1 while opening job for &2 |
| 142 | Problem &1 while closing job for &2 |
| 143 | ALE inbound processing started as job &1 in &2 minutes |
| 144 | ALE inbound processing for &1 has not started |
| 145 | Start inbound processing for &1 |
| 146 | Wait &1 minutes |
| 147 | Start inbound processing for other IDocs |
| 148 | Add transport files for &1 to import queue |
| 149 | Import transport files for &1 |
| 150 | Synchronization with &1/send only: '&2'/maximum object priority: &3 |
| 151 | Evaluations: change pointer &1; NAST: &2; ALE status: &3 |
| 152 | Transports: &1; FTP: &2; transport before IDoc: &3; import: &4 |
| 153 | Internal: slave: '&1' / inbound: '&2' / auto: '&3' / NR update: '&4' |
| 154 | Object category &1 not defined in /ISDFPS/ALE_PRI |
| 155 | Monitoring of remote system &1 completed |
| 156 | Monitoring of remote system &1 canceled |
| 157 | OK indicator is not set for ALE inbound procg -> cannot start job |
| 158 | Error while deleting the transport files from &1 |
| 159 | Error while importing the transports |
| 160 | Error while retrieving transport files from FTP server &1 |
| 161 | Incorrect application command: &1 |
| 162 | Partner system &1 |
| 163 | Starting ALE status monitor... |
| 164 | Error starting the synchronization in &1: &2 |
| 165 | Reset counter for transient transition for &1 |
| 166 | Counter for transient transition: &1 |
| 167 | &1 &2 &3 &4 |
| 168 | Partner status: &1 / &2 - repeat counter: &3 &4 |
| 169 | Offline operation |
| 170 | Configure obj. category &1 during synchronization from distribution model |
| 171 | Creation of message type &1 &4 for partner system &2 - category &3 |
| 172 | Error while creating message type &1 &3 for partner system &2 |
| 173 | Configuration in /ISDFPS/ALE_OBJ with category &1 completed |
| 174 | Configure obj. priorities for synchronization from ALE partner profiles |
| 175 | Create object priorities for system &1 as a copy of system &2 |
| 176 | No entry created for b. object type &1 &2 &3 &4 |
| 177 | Error while calling BAdI for handling transports |
| 178 | Start of final ALE processing for &1 &2 &3 &4 |
| 179 | Error during start of final ALE processing |
| 180 | No partner system for &1 activated in /ISDFPS/ALE_SYS |
| 181 | Switch port for partner profiles for &1 from &2 to &3 |
| 182 | Port for partner profiles successfully switched to &1 |
| 183 | Authorization check &1; &2 &3 |
| 184 | &1 entries found |
| 185 | Port &3 set to partner &1 for message type &2 |
| 186 | Error &4 while setting &3 to partner &1 for message type &2 |
| 187 | Auto-reactions still possible |
| 188 | Test run ended |
| 189 | Test run - no changes are made on the database |
| 190 | Switch mode of partner agreements for &1 to &2 |
| 191 | New mode &3 for message type &2 for partner &1 set |
| 192 | Switching of mode for partner agreement for &1 ended |
| 193 | Current mode is &3 for message type &2 for partner &1 |
| 194 | Delta O unknown - using default value: |
| 195 | Background processing - start: '&1', Delay:'&2', Prefix:'&3', Test:'&4' |
| 196 | Synchronization with &1 started |
| 197 | Start of sychronization with &2 terminated |
| 198 | OK indicator for ALE inbound prcg not set - inbound prcg not started |
| 199 | Force switch set - Start of ALE inb. procg also without ready indicator |
| 200 | ZBV-SYS: &2 was successfully updated for LOG-SYS &1 in tab. ALE_SYS |
| 201 | Error writing ZBV-SYS: &2 for LOG-SYS &1 in tab. ALE_SYS |
| 202 | Import parameter &1 is initial |
| 203 | Read error: Table /ISDFPS/ALE_SYS |
| 204 | Inconsistency: Table /ISDFPS/ALE_SYS (logical system: &1) |
| 205 | ALE inbound processing started independent of OK/ready indicator |
| 206 | Force-FL OK switch set - Start ALE inb. procg also during FL problems |
| 207 | Background jobs NOT started |
| 208 | Application locked by user '&1' |
| 209 | Table entry for &1 is locked |
| 210 | ALE routing system: &1 |
| 211 | Error while reading parameters of ALE routing system &1 |
| 212 | No separate ALE routing system |
| 213 | Separate routing system not taken into account in XI |
| 220 | Logical system &1&2 is not maintained in table T000 |
| 221 | Logical system &1&2 is not configured in table /ISDFPS/CCMS_SYS |
| 250 | Log output only if TEST RUN also ='X' |
| 251 | TEST RUN: No jobs are scheduled |
| 252 | Error during Job OPEN ( &1 / &2 / &3 ) |
| 253 | Error during Job SUBMIT ( &1 / &2 / &3 ) |
| 254 | The following would be scheduled: &1 &2 &3 &4 |
| 255 | ===> Predecessor for this is: &1 &2 &3 &4 |
| 256 | Incorrect report name &1 (phase &2 / group &3) |
| 257 | Incorrect variant &1 for report &2 (phase &3 / group &4) |
| 258 | Problem with report name &1, variant &2 ( phase &3 / group &4 ) |
| 259 | Start of DFPS Background Scheduler |
| 260 | End of DFPS Background Scheduler |
| 298 | Maintenance of DFPS-CCMS settings has started |
| 299 | Maintenance of DFPS-CCMS settings has ended |
| 300 | Activation of system-wide CCMS access was unsuccessful |
| 301 | DFPS system landscape maintenance started |
| 302 | DFPS system landscape maintenance completed |
| 303 | Create new system |
| 304 | Change settings for system &1 |
| 305 | Delete settings for system &1 |
| 306 | No line has been selected |
| 307 | Data for system &1 has been saved |
| 308 | Data for system &1 has been deleted |
| 309 | Copy data from system &1 |
| 310 | Error during /ISDFPS/REPORT_SYSTEM_STATE |
| 311 | Error during /ISDFPS/REPORT_SYSTEM_MODE |
| 312 | Error during /ISDFPS/REPORT_SYSTEM_SYNC |
| 313 | Error during /ISDFPS/TEST_SYSTEM_CONN |
| 314 | Error during /ISDFPS/TEST_SYSTEM_QUEUES |
| 315 | Error during /ISDFPS/REPORT_SYSTEM_IDOCQ |
| 316 | Error during /ISDFPS/REPORT_SYSTEM_TRFCQ |
| 317 | Erorr during /ISDFPS/REPORT_SYSTEM_RFC_CONN |
| 318 | Error during /ISDFPS/REPORT_SYSTEM_CONN |
| 319 | Error during /ISDFPS/TEST_SYSTEM_RFC_CONN |
| 320 | Nodes created successfully |
| 321 | The nodes have been reset |
| 322 | Error during &1 |
| 333 | No application log found |
| 350 | Do you really want to carry out this action? |
| 351 | Overwriting data in table &1 |
| 352 | Changes released by user & |
| 353 | Cancelled by user &1 |
| 354 | Data will be deleted |
| 355 | Data changed |
| 401 | Send number range data to &1 |
| 402 | Error &1 while sending number range data |
| 450 | Deactivate filter for partner &1 |
| 451 | Number of message types for partner &1: &2 |
| 452 | Deactivate filter for partner &1, priority &2 |
| 453 | Deactivate filter for &1 - &2 - &3 - &4 |
| 454 | Problem while deactivating filter for &1 - &2 - &3 |
| 455 | Activate filter for partner &1 |
| 456 | Activate filter for partner &1 for &2 - &3 |
| 457 | Problem while activating filter for &1 - &2 |
| 458 | Delta-O exceeded - remaining messages: &1 |
| 459 | Start time: &1 |
| 460 | Time limit (Delta-O): &1 |
| 461 | &1 - remaining messages: &2 |
| 462 | Determine system mode and status relative to &1 |
| 463 | System mode/status for &1: &2 &3 &4 |
| 464 | Create filter for &1 |
| 465 | Delete filter for &1 |
| 466 | Create interfaces for &1 |
| 467 | Delete interfaces for &1 |
| 468 | Get priorities for message types of &1 |
| 470 | &1 has been removed and cannot be set as the local main system |
| 471 | No auto-reactions if connection is interrupted for &1 |
| 472 | Auto-reaction should take place if connection is interrupted for &1 |
| 473 | No auto-reactions if connection is interrupted in same physical system |
| 474 | Local main system for CCMS auto-reactions not yet defined |
| 475 | Local main system already defined (&1) |
| 476 | You are not authorized to maintain system data |
| 477 | Settings for &1 checked successfully |
| 478 | No system selected |
| 501 | Could not save data for APO integration model |
| 502 | Could not set data for APO integration model to inactive |
| 503 | Could not set data for APO integration model to active |