/SAPAPO/ATP_BOP - BOP: Backorder Processing
The following messages are stored in message class /SAPAPO/ATP_BOP: BOP: Backorder Processing.
It is part of development package /SAPAPO/ATP_TOOL in software component SCM-APO-ATP. This development package consists of objects that can be grouped under "ATP: Various Tools".
It is part of development package /SAPAPO/ATP_TOOL in software component SCM-APO-ATP. This development package consists of objects that can be grouped under "ATP: Various Tools".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Transaction ID is invalid |
| 001 | No transaction ID was transferred |
| 002 | Transaction ID was switched without completion |
| 003 | Error reading pending orders (requirements) |
| 004 | No orders selected by the filter settings |
| 005 | Filter type &1 does not exist |
| 006 | Current entries were not saved as filters (variants) |
| 007 | Specified variant &2 is not defined for filter type &1 |
| 008 | Sort profile &1 does not exist |
| 009 | Category &1 is not supported |
| 010 | Characteristic or field &1 is unknown |
| 011 | Not all required parameters were copied to the function |
| 012 | The confirmations of all selected orders were removed |
| 013 | Choose at least one confirmation situation |
| 014 | Choose at least one order type |
| 015 | Value of characteristic (or field) &1 could not be transferred |
| 016 | Check mode for item &1/&2 is missing; no check is performed |
| 017 | Characteristic or field &1 or the sort column &2 is unknown |
| 018 | Enter a unit of measure |
| 019 | Enter either only a date range or a horizon range |
| 020 | Selected backorder processing was not found |
| 021 | There are &1 backorder processes w. these attrib. (see selection list) |
| 022 | Characteristic &1 is unknown in item |
| 023 | Restriction of SELECT-OPTIONS cannot be set (error &1) |
| 024 | Option '&1' is not allowed |
| 025 | Conversion factor from &2 to &3 cannot be determined |
| 026 | Hierarchy &1 is unknown |
| 027 | Hierarchy &1 is invalid or defined incorrectly |
| 028 | You cannot determine products using the product selection |
| 029 | You cannot determine products using the hierarchy |
| 030 | Description of sort profile was not transferred |
| 031 | You cannot determine locations using the selection for &1 |
| 032 | You cannot determine locations using the hierarchy for &1 |
| 033 | ATP alert profile &1 is not defined |
| 034 | PP/DS alert profile &1 is not defined |
| 035 | Backorder processing status (&1) does not allow any update |
| 036 | Backorder processing status (&1) does not allow any changes |
| 037 | Special sorting does not exist for characteristic &1 |
| 038 | Status (&1) is not allowed in this application |
| 039 | Requested buffer for backorder processing was not found |
| 040 | Transferred order does not exist |
| 041 | Generation of sorter &1 from template &2 |
| 042 | Parameters copied to function module are incomplete |
| 043 | Characteristic or field &1 is unknown |
| 044 | Source code for filter type &2 could not be generated |
| 045 | Source code for sort profile &2 could not be generated |
| 046 | Backorder processing status (&1) does not allow any deletion |
| 047 | Filter cannot be executed in this call sequence |
| 048 | Error when updating documents (category &1) |
| 049 | No documents in buffer |
| 050 | No requirements transferred to buffer |
| 051 | &1 documents updated |
| 052 | No documents updated |
| 053 | Parameter changes of filter type must be saved as a variant |
| 054 | Without filter variants all documents are copied to the worklist |
| 055 | Function cannot be performed; the system ignores the function |
| 056 | Scheduling could not be executed |
| 057 | The confirmation is removed for all selected documents |
| 058 | No results exist |
| 059 | Order entry &1/&2 is invalid |
| 060 | Field name &1 is not specified |
| 061 | Function is not currently supported |
| 062 | No documents contained in buffer |
| 063 | No data available for selected document |
| 064 | Item transferred has no requirement |
| 065 | Order transferred (POSGUID &1) does not exist in the buffer |
| 066 | Item &1/&2 has already been changed manually |
| 067 | Item &1/&2 has already been fully delivered |
| 068 | Item &1/&2 was deleted |
| 069 | Not all times can be displayed |
| 070 | Function code &1 is not supported |
| 071 | Function cannot be executed in the chosen row |
| 072 | Transaction ID &1 for backorder processing is not known |
| 073 | &1 order items could not be locked |
| 074 | Cross-system lock is not correctly configured |
| 075 | Order item cannot be displayed |
| 076 | Dates for the item were not found |
| 077 | No item was transferred for display |
| 078 | Function can only be called for items |
| 079 | No rows have been selected for this function |
| 080 | No backorder processing for item &1/&2 |
| 081 | Item &1/&2 has not been updated |
| 082 | Runtime display in milliseconds |
| 083 | Runtime display in seconds |
| 084 | Item &1 does not exist |
| 085 | Planning object &1 not found for item &2/&3 |
| 086 | Item &1/&2 was not updated (SYSFAIL in the queue) |
| 087 | Item &1/&2 was not updated (early confirmation generated) |
| 088 | Changes have been completely updated |
| 089 | Changes have not yet been completely updated |
| 090 | Stock or receipt can no longer be used to meet the requirements |
| 091 | Stock or receipt can only be partially used to cover requirements |
| 092 | No confirmation by the requested date |
| 093 | Partial confirmation by the requested date |
| 094 | Complete confirmation with date proposal |
| 095 | Partial confirmation with date proposal |
| 096 | &1: Changing confirmation to &2 leads to a shortage of &3. |
| 097 | &1: You have deliberately generated an overconfirmation |
| 098 | &1: Date change is before request schedule line |
| 099 | &1: Confirmation (&2) can only be made for the amount of the ATP qty (&3) |
| 100 | &1: Total confirmed quantity (&2) is greater than requirement qty (&3) |
| 101 | Enter a product |
| 102 | Enter a location |
| 103 | Enter a business event |
| 104 | No changes made to document &1 |
| 105 | Select one document |
| 106 | Reduction factor: Enter a value between 0 and 1 |
| 107 | Kits and one-to-many substit. are not supported in direct delvry scenario |
| 108 | Confirm new schedule lines before saving (Enter) |
| 109 | &1: The product allocation from &2 has been overassigned by &3 &4 |
| 110 | &1: There is no overassignment for the product allocation from &2 |
| 111 | No messages exist |
| 112 | Check instructions &1/&2 not maintained |
| 113 | Order &1/&2 is inconsistent and has not been processed |
| 114 | Backorder processing &1 was not locked in the update |
| 115 | Sort profile &1 replaces the sort specifications defined in the ODL |
| 116 | Filter type &1: Deliveries are ignored in backorder processing |
| 117 | Item &1 is locked by another process |
| 118 | &1 products added to the selection |
| 119 | Variant &1 for special sort does not exist |
| 120 | Select an item |
| 121 | No delivery group correlation executed for item &1/&2 |
| 122 | Change to item &1/&2 in R/3 terminated with error (see BOP log) |
| 123 | R/3 message &1 &2: &3 |
| 124 | Table /sapapo/bop for item &1/&2 updated without lock |
| 125 | Transferred order is excluded |
| 126 | Backorder processing has finished with a percentage of completion of &1% |
| 127 | Maximum monitoring time or maximum idle time has been reached |
| 128 | Partial confirmation: 'Fixed Date/Quantity' checkbox is set for item &1 |
| 129 | BOP processing for &1 items has finished |
| 130 | Event &1 with parameter &2 has been created |
| 131 | Enter either a value for "Created During" or "Created At" |
| 132 | Event &1 with parameter &2 has been created in system &3 |
| 149 | Item &1/&2/3 was overconfirmed before backorder processing |
| 150 | No changes for item &1/&2 |
| 151 | Error when splitting item &1/&2/&3 |
| 152 | Item &1/&2/&3 has been split and was therefore not checked |
| 153 | Item &1/&2 has not been updated, as the purchase order was locked |
| 154 | Item &1/&2/&3 cannot be changed (third-party order processing) |
| 155 | Item &1/&2 was not updated due to an internal mapping error (&3) |
| 160 | Backorder processing buffer does not exist |
| 161 | Results Display in 'Current Requirements/Confirmation Situation' Mode |
| 162 | Items from stock transport orders could not be selected |
| 163 | Not all temporary quantity assignments deleted |
| 166 | All orders are shown for BOP with postprocessing |
| 177 | Error when reading allocation data from ATP tube. |
| 190 | No orders were changed by the settings |
| 200 | A filter type has not yet been selected |
| 201 | A sort profile has not yet been selected |
| 220 | Error in display profile &1 |
| 221 | Profile &1 does not exist; check Customizing in transaction SCPR20 |
| 222 | Unknown error occured |
| 250 | Database rebuild for reqmts grpng only with new rule eval. and del. grp |
| 251 | Database rebuild only necessary after initializing liveCache |
| 252 | Serious database or program error MISL - contact SAP |
| 299 | Related function is not completely implemented |
| 300 | Server group &1 is not defined |
| 301 | Not all RFCs of server group &1 work |
| 302 | The Customizing of parallelizing BOP is incomplete |
| 303 | In Customizing, step &2 is not defined in profile &1 |
| 304 | Enter the maximum group size |
| 305 | Parallelization of step &1 is not yet complete |
| 306 | No step was initialized for parallelization |
| 307 | Maximum group size is smaller than the minimum group size |
| 308 | Increase the maximum number of processes started simultaneously |
| 309 | Specify the number of minimum necessary groups |
| 310 | Of &1 work processes, currently &2 is/are available for parallelization |
| 311 | The number of available work processes cannot be determined |
| 312 | Process status &1 is unknown |
| 313 | Increase the number of minimum necessary groups |
| 314 | Specify both a profile and a server group |
| 315 | Server group &1 specified is not defined |
| 316 | You should not continually update the process runtime log |
| 317 | The process runtime log is not activated |
| 318 | No logging because parallel. backorder proc. is currently switched off |
| 319 | Parallel execution of step &1 is not supported |
| 320 | Enter the maximum bundle size |
| 321 | Minimum bundle size is not smaller than the maximum bundle size |
| 322 | Specify the number of minimum necessary bundles |
| 323 | Increase the number of minimum necessary bundles |
| 400 | Status &1 is not known |
| 500 | No sales scheduling agreement item found for liveCache order &1 |
| 501 | Error determining due deliv. sched. for sales scheduling agreement &1/&2 |
| 502 | Error determining schedule lines for liveCache order &1 |
| 600 | Grouping was unnecessary due to Customizing settings |
| 601 | Less than &1 groups could be built, grouping cancelled |
| 602 | Error occured during the execution of filter |
| 603 | BOP process intialization failure |
| 604 | BOP variant &1 does not exist |
| 605 | Filter type &1 with variant &2 is invalid |
| 606 | BOP variant is initial |
| 607 | BOP variant does not exist |
| 608 | Not all criteria are evaluated |
| 609 | Minimum number of groups must be more than 1 |
| 610 | Maximum group size must be greater than or equal to minimum group size |
| 611 | Filter type &1 is not valid for processing |
| 612 | Selected BOP variant defines another filter (filter type corrected) |
| 613 | Fill out all required entry fields |
| 614 | Filter program does not exist |
| 615 | Unable to split variants; reduce number of variants if required |
| 616 | Unable to create filter variant |
| 617 | Unable to create BOP variant |
| 618 | BOP report variant &1 deleted |
| 619 | Filter variant &1 deleted |
| 620 | BOP variant &1 with filter variant &2 created |
| 621 | Maximum confirmation must be larger than the minimum confirmation |
| 622 | Unable to find pegging area &1 |
| 623 | Unable to convert unit of measure |
| 624 | Percentage of PB distribution was set to 100% for pegging area &1 |
| 625 | No available quantity from pegging area &1 |
| 626 | Check for available quantities failed |
| 627 | Enter positive value |
| 628 | Graphical display is not available in accessibility mode |
| 629 | No source location found for selection |
| 700 | Equidistant renumbering was carried out for the 'item' field |
| 701 | Choose a valid order category |
| 702 | The existing field allocation does not allow this order type |
| 703 | Existent field assignment must be adjusted |
| 704 | & is not a valid field |
| 705 | & is not valid for the current allocation of order types |
| 706 | Fields & and & mutually exclude one another |
| 707 | When using &, & must also be assigned |
| 708 | Saving not possible; field & with filter & has not been assigned yet |
| 709 | &1 cannot be used in &2 |
| 710 | Enter a valid field |
| 711 | Enter a valid filter type |
| 712 | &1 is already used in the special sorting |
| 801 | Error when creating icon &1 |
| 802 | Item-related data for sales sched. agreement &1 &2 cannot be determined |
| 803 | Error determining the LC order number for the confirmation (SSA &1 &2) |
| 804 | Error writing the LC order of the confirmation (SSA &1 &2) |
| 805 | Error determining scheduling lines for the database update |
| 806 | Error updating the open confirmation quantities for the SSA &1 &2 |
| 807 | Error saving the ATP parameters for the sales scheduling agreement &1 &2 |
| 808 | Error updating the confirmation of the SSA &1 &2 to the database |
| 809 | An error occurred during deletion of temporary quantity assignments |
| 810 | Error determining the planning object for the SSA &1 &2 |
| 811 | Error determining schedule lines for the confirmation from LC (SSA &2 &3) |
| 812 | Error determining sched. lines for due delvry sched. from LC (VLP &2 &3) |
| 813 | LC error (return code &1) when reading confirmations for sched. agrmt &2 |
| 999 | Application has not been released |