/SAPAPO/CTM1 - CTM: Messgaes
The following messages are stored in message class /SAPAPO/CTM1: CTM: Messgaes.
It is part of development package /SAPAPO/CTM in software component SCM-APO-SDM. This development package consists of objects that can be grouped under "Capable-To-Match".
It is part of development package /SAPAPO/CTM in software component SCM-APO-SDM. This development package consists of objects that can be grouped under "Capable-To-Match".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ***General messages ***************************************************** |
| 001 | ************************************************************************* |
| 002 | ------------------------------------------------------------------------- |
| 003 | Select a line |
| 004 | &: not yet implemented |
| 005 | &1 +++ Start: &2 &3 |
| 006 | &1 +++ End: &2 &3 |
| 007 | Complete your entries |
| 008 | Select a valid line |
| 009 | Select at least one entry |
| 010 | You are not authorized to run the selected function |
| 099 | Calling &1 for not supported application &2, only supporting &3 |
| 100 | *** Messages, Interface and CTM Planning Profile ************************ |
| 101 | Error when determining model - check planning version |
| 102 | There is no information about descriptive characteristics (-> long text) |
| 103 | This function cannot be executed; see long text |
| 104 | Critical component &1 at &2 has not received any distribution receipts |
| 105 | No distribution receipts (SNC-planned) for your master data selection |
| 106 | Distribution receipt (SNC-planned) exists for non-critical comp. &1 at &2 |
| 200 | Strategy setting for late demand fulfillment is reset |
| 201 | Planning profile &1 does not exist |
| 202 | Planning profile &1 already exists |
| 203 | CTM planning profile &1 is incomplete (complete planning version) |
| 204 | Planning version &1 does not exist |
| 205 | CTM planning profile & is incomplete. Complete the time stream |
| 206 | Time stream &1 does not exist |
| 207 | Planning start date is not within the planning calendar |
| 208 | Planning end date is not within planning calendar |
| 209 | Time stream &1 is not a CTM time stream |
| 210 | Enter the requested start date |
| 211 | Specify the period category |
| 212 | Specify the number of periods |
| 213 | Maintain the time stream definition entries |
| 214 | Deletion is not possible. Time stream &1 still used in profile &2 |
| 215 | Master data selection and profile have to be defined for the same model |
| 216 | Starting date is after end date |
| 217 | Horizon not valid; change the specified dates |
| 218 | Inconsistent planning profile or time stream |
| 219 | Select a row |
| 220 | Do not change or delete this entry |
| 221 | Sequence must be numbered continuously |
| 222 | There are duplicate entries for the search sequence |
| 223 | CTM planning profile &1 is incomplete. Amend search strategy |
| 224 | Search strategy &1 does not exist |
| 225 | Deletion is not possible. Search strategy &1 still used in profile &2 |
| 226 | Search strategy does not exist |
| 227 | Search strategy already exists |
| 228 | Demand time is in the past |
| 229 | Lower limit is larger than the upper limit |
| 230 | More than one text exists for language &1 |
| 231 | Enter language |
| 232 | Change the minimum portion of partial delivery |
| 233 | Enter a value below 100 |
| 234 | Enter a value equal to or over 100 |
| 235 | Time stream &1 already exists |
| 236 | Enter a valid time stream |
| 237 | Enter a name for the CTM planning profile |
| 238 | You can only use this setting with the regenerative planning plan. mode |
| 239 | Use a time stream without gaps |
| 240 | Enter a model |
| 241 | Model &1 does not exist |
| 242 | Enter an order selection |
| 243 | You have not changed order selection &1 |
| 244 | Deletion not possible. Order selection &1 still used in CTM profile &2 |
| 245 | Order selection &1 was deleted |
| 246 | Order selection &1 does not exist |
| 247 | You can only enter prioritization criteria &1 once |
| 248 | Enter a search strategy |
| 249 | Setting only possible with delete mode: "All not firmed orders" |
| 250 | Operation cannot be performed in display mode |
| 251 | You have not made any changes |
| 252 | Data was saved |
| 253 | First save changes in planning profile &1 |
| 254 | Database error occurred while saving |
| 255 | You have selected the active version |
| 256 | Planning version locked by user &2, CTM profile &1 |
| 257 | Planning version locked by CTM profile &1 |
| 258 | CTM Customizing was saved |
| 259 | Transaction locked by user &1. Display only |
| 260 | Master data selection is deleted when you save the CTM profile |
| 261 | CTM profile &1 already created by user &2 |
| 262 | CTM profile &1 has been locked by user &2. Display only |
| 263 | Specify a category |
| 264 | You can only enter category &1 once |
| 265 | Transportation lane from &1 to &2 not contained in the model used |
| 266 | Transportation lane from &1 to &2 has been selected already |
| 267 | In-house prod. source of supply &1 is not contained in the model used |
| 268 | In-house production source of supply &1 has been selected already |
| 269 | Specify start and end date |
| 270 | Specify a duration |
| 271 | CTM profile is currently locked by user &1 |
| 272 | Specify parameter name |
| 273 | Order selection &1 does not exist |
| 274 | Peg IDs could not be determined for order selection area &1 |
| 275 | Combining the Planning and Delete Modes is not Allowed |
| 276 | Specify the type of ATP category for the filter |
| 277 | If the sequence is from Customizing you have to enter the sort profile |
| 278 | Sort profile from Customizing has not been specified |
| 279 | CTM profile is locked by another user |
| 280 | Prioritization Criterion &1 is not Supported |
| 281 | Special sorting is not set for criterion "&1" |
| 282 | Special sorting has not been maintained in Customizing for criterion "&1" |
| 283 | Special sorting is supported for criterion "&1" |
| 284 | Specify a package size |
| 285 | Order selection &1 is locked by user &2; display only |
| 286 | Order selection &1 is being created by user &2 |
| 287 | Time stream &1 was saved |
| 288 | Search strategy &1 was saved |
| 289 | Specify a category for receipt elements |
| 290 | Specify a category for demand elements |
| 291 | Specify a category for every order category |
| 292 | Enter a weekday |
| 293 | Name &1 does not exist for flexible periods |
| 294 | CTM does not support the procedure specified for plan explosion |
| 295 | Specify a Variant for Supply Distribution |
| 296 | Variant &1 for Supply Distribution Does Not Exist |
| 297 | Specify a variant for dynamic master data selection |
| 298 | Variant &1 for master data selection does not exist |
| 299 | Specify a time unit |
| 300 | *** Master data check messages ************************************* |
| 301 | No procurement type is specified for the location product |
| 302 | The planning start date is in the past |
| 303 | The specified supply limits are not in use |
| 304 | No source of supply was found for product &1 at location &2 |
| 305 | No suitable source of supply was found due to the lot size |
| 306 | No available capacity for resource &1 at location &2 |
| 307 | No base unit of measure was maintained for product &1 and location &2 |
| 308 | Lot size entries for product &1 and location &2 are inconsistent |
| 309 | Available capacity was not checked for resource &1, location &2 |
| 310 | Location product &1 and &2 is not contained within the planning scope |
| 311 | Inconsistent validity period for in-house prod. source of supply &1 |
| 312 | Inconsistent lot size entries for selection of source of supply &1 |
| 313 | Source of supply &1 has no operations |
| 314 | Source of supply &1 has activities with no operations assigned |
| 315 | The operation has no number |
| 316 | Operation &1 has no activities |
| 317 | Activity &1 has not been assigned to an operation |
| 318 | Activity &1 has no mode |
| 319 | Activity &1 has no output components and no successors |
| 320 | CTM time stream &1 is not used in any CTM profile |
| 321 | Input components are always consumed at the start of an activity |
| 322 | Output components are always available at the end of an activity |
| 323 | Logical component &1 has no product |
| 324 | Inconsistent validity period for component &1 in source of supply &2 |
| 325 | Validity period for component &1 is outside validity period for source &2 |
| 326 | Validity of component &1 does not correspond with validity of source &2 |
| 327 | Mode &1 has no primary resources |
| 328 | No values specified for variable and fixed duration of mode &1 |
| 329 | Mode &1 has an incorrect mode priority |
| 330 | Incorrect reference type; only end-start relationship is possible |
| 331 | Minimum interval of activity relationship is larger than maximum interval |
| 332 | You have not specified an order selection |
| 333 | Demand selection &1 has no suitable location products |
| 334 | Plan &1 is not active |
| 335 | The pegging IDs for CTM profile &1 could not be determined |
| 336 | Location product &1, &2 is not assigned to the current model |
| 337 | CTM does not support option 'produce within a shift' |
| 338 | Primary resource consumption not specified for mode &1 |
| 339 | CTM does not support option 'Align with Grid' |
| 340 | Component &1 is also the primary product of source of supply &2 |
| 341 | Navigation is only supported for PPM and iPPE sources of supply |
| 342 | Resource &1 is not assigned to the current model |
| 343 | CTM does not support this resource type |
| 344 | Plan &1: Activity &2 has more than one successor |
| 345 | Plan &1: Activity &2 has more than one predecessor |
| 346 | Plan &1 has more than one activity without successors |
| 347 | Plan &1 has more than one activity without predecessors |
| 348 | No data found for resource &1 |
| 349 | Resource must have 100% capacity load |
| 350 | No plan exists for in-house production source of supply &1 |
| 351 | External proc. for product &1, location &2; source of supply &3 not used |
| 352 | Resources can only be checked with in-house prod. sources of supply |
| 353 | Select a node |
| 354 | The desired function is not available for the selected object. |
| 355 | Resource &1: Unscheduled breaks are not supported by CTM! |
| 356 | Lot size data for transportation lane &1 -> &2 (&3) inconsistent! |
| 357 | Production horizon for product &1, location &2 lower than standard value |
| 358 | Production horizon for product &1, location &2 larger than standard value |
| 359 | Stock transfer horizon for product &1, loc. &2 lower than standard value |
| 360 | Stock transfer horizon for product &1, loc. &2 larger than standard value |
| 361 | Planned deliv. time for product &1, location &2 is below standard value |
| 362 | Planned deliv. time for product &1, location &2 is above standard value |
| 363 | Minimum lot size for product &1, location &2 lower than standard value |
| 364 | Minimum lot size for product &1, location &2 larger than standard value |
| 365 | Maximum lot size for product &1, location &2 is lower than standard value |
| 366 | Maximum lot size for product &1,location &2 is larger than standard value |
| 367 | Fixed lot size for product &1, location &2 is lower than standard value |
| 368 | Fixed lot size for product &1, location &2 is larger than standard value |
| 369 | Lot size round. value for product &1, loc. &2 is lower than stand. value |
| 370 | Lot size round. value for product &1, loc. &2 is larger than stand. value |
| 371 | Minimum lot size for transportat. lane &1 -> &2 lower than standard value |
| 372 | Min. lot size for transportat. lane &1 -> &2 larger than standard value |
| 373 | Maximum lot size for transportat. lane &1 -> &2 lower than standard value |
| 374 | Maximum lot size for transportat.lane &1 -> &2 larger than standard value |
| 375 | Rounding value for transportat.lane &1 -> &2 is lower than standard value |
| 376 | Rounding value for transport. lane &1 -> &2 is larger than standard value |
| 377 | Minimum lot size for source of supply &1 is lower than standard value |
| 378 | Minimum lot size for source of supply &1 is larger than standard value |
| 379 | Maximum lot size for source of supply &1 is lower than standard value |
| 380 | Maximum lot size for source of supply &1 is larger than standard value |
| 381 | Validity start for source of supply &1 is smaller than standard value |
| 382 | Validity start date for source of supply &1 is larger than standard value |
| 383 | Validity end date for source of supply &1 is smaller than standard value |
| 384 | Validity end date for source of supply &1 is larger than standard value |
| 385 | Scrap for activity &1 (source of supply &2) is smaller than stndrd value |
| 386 | Scrap for activity &1 (source of supply &2) is larger than standard value |
| 387 | A deletion flag has been set for product &1 in location &2 |
| 388 | Goods receipt cannot be planned for source of supply &1 |
| 389 | Planning parameter &1 is obsolete |
| 390 | Value &2 of planning parameter &1 is obsolete |
| 391 | No suitable source of supply was found due to the lot size |
| 392 | Source of supply &1 cannot be used due to the lot size |
| 393 | Order details will not be checked |
| 394 | Leading product of FFF subset & not contained in planning scope |
| 395 | Location product &1/&2 can only be replaced and cannot be procured |
| 396 | Bucket-oriented planning does not support this resource type |
| 397 | Location product &1/&2 is also main receipt of source of supply &3 |
| 398 | Component &1 in in-house-production source of supply &2 is a sub product |
| 399 | Settings for cont. planning, PP/DS master data and PP/DS orders were made |
| 400 | *** CTM Planning run messages (Interface) ************************* |
| 401 | Error occurred during CTM planning run &1 &2 &3 &4 |
| 402 | Data has been reset |
| 403 | Model data uploaded |
| 404 | Planning version data was uploaded |
| 405 | Planning run completed |
| 406 | RFC error. (Call: &1; error group: &2; key: &3; message: &4) |
| 407 | Interal error. Invalid order category &1 |
| 408 | Individual query was launched |
| 409 | Log file cannot be opened |
| 410 | No in-house production source of supply found for model &1 |
| 411 | No &1 exists according to order and master data selection |
| 412 | No planning periods exist |
| 413 | No supply categories exist |
| 414 | No resources exist |
| 415 | No stock exists |
| 416 | Model &1 has no transportation lanes |
| 417 | Error occurred while resetting planning engine |
| 418 | Error occurred while uploading model data |
| 419 | Error occurred while uploading planning version data |
| 420 | ==> &1 Resources Read |
| 421 | Error occurred while reading the sources of supply (in-house production) |
| 422 | ==> &1 sources of supply read (in-house production) |
| 423 | No source of supply found for external procurement |
| 424 | ==> &1 sources of supply read (external procurement |
| 425 | Internal error occurred while generating operations |
| 426 | Internal error: Order &1 inconsistent |
| 427 | Pegging quantity of receipt &1 exceeds planning-relevant quantity by &2 |
| 428 | Pegging quantity of demand &1 exceeds planning-relevant quantity by &2 |
| 429 | ==> &1 Pegging lane created |
| 430 | ==> &1 Production orders created |
| 431 | ==> &1 Transport orders created |
| 432 | ==> &1 Purchase Requisition Created |
| 433 | Invalid selection period for capacity data |
| 434 | Error when reading current CTM profile |
| 435 | Internal error &1 when reading resource header data |
| 436 | ==> Available capacity read for &1 bucket resources |
| 437 | ==> Available capacity read for &1 time-continuous resources |
| 438 | ==> &1 demands were fulfilled completely and on time |
| 439 | ==> &1 demands were fulfilled completely, but late |
| 440 | ==> &1 demands only partially fulfilled, but on time |
| 441 | ==> &1 demands only partially fulfilled, and late |
| 442 | ==> &1 demands not fulfilled |
| 443 | ==> &1 FFF subsets read |
| 444 | Delivery date for demand &1 was postponed (airline reservation) |
| 445 | ==> &1 substitutions read |
| 446 | Fixed pegging between order &1 and order &2 was deleted |
| 447 | Order &1: Activity in liveCache was scheduled differently from CTM |
| 448 | Order &1: Processing times differ for activities in liveCache |
| 449 | Application logs of parallel CTM planning runs |
| 450 | Date was set to January 19, 2038 |
| 451 | ==> Forecast consumption was executed for &1 location products |
| 452 | ==> &1 Substitution orders created |
| 453 | CTM engine: Package no. &1 finished --- liveCache: Package no &2 finished |
| 454 | Error creating an order: Customizing could not be read |
| 455 | Explanations for CTM planning run |
| 456 | Result indicators for CTM planning run |
| 457 | ==> &1 Product/Location Combinations Read |
| 458 | Simulation: Pegging between Order &1 and Order &2 Would Be Deleted |
| 459 | Simulation: Order &1 Would Be Deleted |
| 460 | CTM results -> liveCache: Package number &1 |
| 461 | ==> &1 location(s) read |
| 462 | ==> &1 calendar(s) read |
| 463 | &1 substitution orders for stock transport orders omitted |
| 464 | Error occurred during supply distribution run &1 &2 &3 &4 |
| 466 | Inconsistent input data, table &1 (&2 &3 &4) |
| 467 | Inconsistent input data, table &1, product &2, location &3 |
| 468 | Error while writing back the results |
| 469 | Planning run was terminated |
| 470 | Low hard disk capacity on CTM engine &1 server, available: &2 MB |
| 471 | Trace file deactivated |
| 472 | Input data being written to file (&1) |
| 473 | Output data being written to file (&1) |
| 474 | |
| 475 | Product &1 at loc. &2 is not consistent with time-dep. LocProd hierarchy |
| 476 | |
| 477 | Internal error &1 when reading resource block header |
| 500 | *** CTM planning run messages (Engine) **************************** |
| 501 | Order number &1 (internal) is not in range [&2 .. &3] |
| 505 | Demand date &1 does not lie in the planning period |
| 508 | No entry components exist for in-house production source of supply &1 |
| 509 | No valid product/location data for demand &1 |
| 510 | Node &1 of the solution tree could not be assigned |
| 511 | Product &2, location &3 is not in master data selection |
| 512 | Source of supply &1 has no plan |
| 513 | Source of supply &1 has no planning activity |
| 514 | No mode for activity &1 of plan &2 |
| 515 | Resource &2 not in master data selection |
| 516 | No activity created for planned order &1 |
| 517 | Bucket factor for resource &1 is zero |
| 518 | Interface defines bucket parameters for non-bucket resource &2 |
| 519 | Start time of a bucket for resource &3 was adjusted |
| 520 | Resource &3 has bucket with length &4 |
| 521 | Minimum duration (&1) is too short (PPM &4; activity &2; mode &3) |
| 522 | Possible overflow (activity &1 in bucket resource &2, capacity &3) |
| 523 | Possible overflow (activity &1 in bucket resource &2) |
| 524 | Possible overflow (activity &1 in bucket resource &2) |
| 525 | Possible overflow (bucket resource &1, actual value &2) |
| 526 | Resource demand has not been maintained for primary resource &2 (mode &1) |
| 527 | Resource has not been maintained for primary resource &1 (mode &2) |
| 528 | Total (&1) incoming quota arrangements for loc. (&2) greater than 100% |
| 530 | Total (&1) incoming quota arrangements for loc. (&2) greater than 100% |
| 531 | Total (&1) incoming quota arrangements for loc. (&2) greater than 100% |
| 532 | Total (&1) incoming quota arrangements for loc. (&2) greater than 100% |
| 533 | Possible surplus (requirement quantity &1 is too large) |
| 534 | Resource &1 has buckets with invalid lengths |
| 535 | Resource &1 has buckets with length 0 |
| 536 | Specified time for scheduling demand &1 exceeded |
| 537 | Calendar &1 does not have validity intervals |
| 540 | Planning terminated due to inconsistent model |
| 541 | Product &1 in location &2 contained in a loop |
| 542 | Product &2 is not included in the master data selection |
| 570 | CTM engine cannot allocate any more memory, consumption (maximum): &1 MB |
| 571 | Internal error has occurred (&1 &2 &3 &4) |
| 572 | Internal error has occurred |
| 573 | CTM engine version: &1 |
| 574 | Selectcondition/Procedure ignored: &1 not supported. |
| 575 | Reference characteristic &1 &2 ignored; not supported |
| 576 | Mode &1 has a zero duration but consumes a resource &2. |
| 577 | Mode &1 uses resources which don't have the same bucket grid. |
| 578 | The plan &1 contains a non linear activity sequence. |
| 579 | Calendar of resource &1 does not allow the PPMs/PDSs &2 to be scheduled. |
| 600 | *** Demand Prioritization ********************************************** |
| 601 | Error occurred during demand prioritization; see log |
| 602 | Demand prioritization completed |
| 603 | Demand selection period is not in planning horizon |
| 604 | ==> &1 Demands Determined |
| 605 | Customizing: Key Figure Assignment not Unique |
| 606 | There are no substitutions because "Do not apply rules" is selected |
| 607 | ==> &1 rules were found |
| 608 | You can display the replacements for the last interval |
| 609 | Demand information is locked by another user |
| 700 | *** Supply Categorization ********************************************* |
| 701 | Error occurred during supply categorization; see log |
| 702 | Order &1 was deleted because it wasn't firmed |
| 703 | Product &1 does not exist |
| 704 | Location &1 does not exist |
| 705 | Error: Order &1 could not be deleted |
| 706 | Supply categorization completed |
| 707 | Supply category &1 does not exist |
| 708 | Enter a supply category |
| 709 | Product &1 does not exist in location &2 |
| 710 | Version &1 already exists |
| 711 | Version &1 does not exist |
| 712 | Enter a product |
| 713 | Enter a location |
| 714 | Specify an ID for the Supply Limits |
| 715 | Maintain the assignment of supply limits to supply categories |
| 716 | Assign supply limits to the supply categories |
| 717 | Category &1 is a predefined default category and cannot be used |
| 718 | Internal error occurred while calculating periods |
| 719 | Enter product, location and time period |
| 720 | The time period entered overlaps with an existing time period |
| 721 | Product &1 at location &2 has been selected |
| 722 | &1 Supply limits do not exist |
| 723 | ==> &1 Unfixed Orders Deleted |
| 724 | ==> &1 Fixed Pegging Lanes Deleted |
| 725 | Simulation: ==> &1 Unfixed Orders Would Be Deleted |
| 726 | Simulation: ==> &1 Fixed Pegging Lanes Would Be Deleted |
| 727 | ==> &1 Supplies Determined |
| 740 | Version &1 does not belong to model &2 |
| 741 | Versions of master data selection and CTM profile do not match: &1 and &2 |
| 777 | Available memory on optimization server is low (available: &1%) |
| 800 | *** Miscellaneous ************************************************ |
| 801 | CTM planning run completed |
| 802 | Connection to liveCache is not currently possible |
| 803 | Connection to CTM engine is not possible (RFC destination &1) |
| 804 | Error in server selection |
| 805 | CTM planning run is not yet completed |
| 806 | Status of CTM planning profile &1 was reset |
| 807 | RFC connection is not open |
| 808 | RFC connection not known |
| 809 | Error in server selection. All servers used |
| 810 | RFC connection for optimization server &1 not maintained in Customizing |
| 811 | Error occurred when releasing optimization server |
| 812 | Error occurred when processing the language-dependent descriptions |
| 813 | Error occured when setting up tree structure; function &1 |
| 814 | Error in CTM planning, see the log for details |
| 816 | Error occurred when setting up tree structure; method &1 |
| 817 | Internal error in method &1 |
| 818 | Select orders from liveCache |
| 819 | Order selection ended |
| 820 | No entry was determined for order &1 |
| 822 | Pegging area for product &1 in location &2 not found |
| 823 | Enter positive values only |
| 824 | RFC queue &1 is still reserved, see qRFC monitor (outbound queues) |
| 825 | Error when creating orders: Invalid queue name |
| 826 | Error when saving the simulation version |
| 827 | Error when opening a simulation version |
| 828 | COM error |
| 829 | Function terminated because of an error (-> Log) |
| 830 | CTM optimization server with ID &1 does not found or is not active |
| 831 | Enter an offset that is larger than zero |
| 832 | Specify the procurement type replaced and the new procurement type |
| 833 | Enter a rule |
| 834 | Rules are not supported for parallel CTM runs |
| 835 | Parallel processing profile &1 does not exist |
| 836 | Parallel processing not active for planning profile &1 |
| 837 | Parallel processing profile &1: Server group &2 does not exist |
| 838 | Planning explanation data cannot be saved due to maximum limit of 2GB |
| 840 | No messages for CTM profile &1 |
| 841 | No messages for &1 |
| 845 | Explanation profile does not exist |
| 850 | Task &1 +++ Start: &2 &3 |
| 851 | Task &1 +++ End: &2 &3 |
| 852 | Split model +++ Start: &1 &2 |
| 853 | Split model +++ End: &1 &2 |
| 854 | ==> &1 submodels generated |
| 855 | Task &1: &2&3 |
| 856 | Task &1: Error during CTM planning |
| 875 | Header PPM &1 has no sublevel PPM |
| 876 | Different unit of measures in header level PPM &1 and sublevel PPM &2 |
| 877 | PPM/PDS &1 for header product &2 is not assigned to PPM/PDS hierarchy |
| 878 | Production location is not the same as for header PPM/PDS &1 |
| 879 | No source of supply determined for sublevel product &1 at location &2 |
| 880 | Resource must be the same as for the header PPM/PDS &1 |
| 881 | Header PPM &1 and sublevel PPM &2 have different validities |
| 882 | Input component &1 is missing in the sub level PPM/PDS &2 |
| 883 | Material quantity of &1 is not consistent with header level PPM/PDS &3 |
| 884 | Input component &1 is a header product in sublevel PPM/PDS &2 |
| 899 | &1 &2 &3 &4 |