/SAPAPO/MA - Sales and Operations Planning
The following messages are stored in message class /SAPAPO/MA: Sales and Operations Planning.
It is part of development package /SAPAPO/MCP2 in software component SCM-APO-FCS. This development package consists of objects that can be grouped under "R/3 Application Development: Sales & Operations Planning".
It is part of development package /SAPAPO/MCP2 in software component SCM-APO-FCS. This development package consists of objects that can be grouped under "R/3 Application Development: Sales & Operations Planning".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Problems creating an object |
| 001 | Function code & not defined here |
| 002 | Destination for data mart unknown |
| 003 | An entry already exists with the same key |
| 004 | Key figure <&> already exists |
| 005 | Version & has not yet been created |
| 006 | Version & already exists |
| 007 | Key figure <&> does not exist |
| 008 | Period indicator & is not valid - try & or & |
| 009 | The planning parameters have been saved |
| 010 | You do not have the necessary authorizations |
| 011 | Location split: Location and location type entries not possible |
| 012 | No location split: Enter location/location type |
| 013 | Error reading from period & |
| 014 | Location &1 is not defined in model &2 |
| 015 | No planning areas exist |
| 016 | Planning layout (view) & & does not exist |
| 017 | Version & does not exist |
| 018 | You are already on the highest aggregated node |
| 019 | This navigation is not available |
| 020 | Select a key figure |
| 021 | This action is not possible for the key figure selected |
| 022 | Select a planning object |
| 023 | Specify a row text |
| 024 | Key entry already exists |
| 025 | Choose a valid key figure for disaggregation |
| 026 | No aggregation or disaggregation selected -> Entries were adjusted |
| 027 | No values can be proposed for this InfoCube |
| 028 | Not possible to change unit to "blank" |
| 029 | Select relevant row |
| 030 | Make a selection first - this entry will be lost |
| 031 | Make a selection before performing this task |
| 032 | F4 Help cannot propose a value |
| 033 | Maintain InfoCube planning parameters via TA /SAPAPO/PARA |
| 034 | Selection accesses data that is currently locked by &1 |
| 035 | Use the context menus (to view them, click with the right mouse button) |
| 036 | Combinations were successfully generated |
| 037 | No combinations could be generated |
| 038 | No characteristic combinations can be planned for this selection |
| 039 | Drilldown on charateristic & no longer possible |
| 040 | Only enter data on an aggregation level. Entries reset |
| 041 | Basic key figure for disaggregation is empty. Entry reset |
| 042 | InfoCube successfully locked for your selection... |
| 043 | Combination created |
| 044 | Update termination - Exception & - & |
| 045 | Invalid InfoCube - length of product not the same as in Customizing |
| 046 | Entry missing for at least one characteristic |
| 047 | In background mode, manual forecasting cannot be chosen |
| 048 | Enter an operation or delete value & |
| 049 | The combination has been deleted |
| 050 | No data has been changed. Nothing has been saved. |
| 051 | Plan saved under version number & |
| 052 | This combination of characteristics is currently locked |
| 053 | System error during locking attempt |
| 054 | Characteristic combination: & & & |
| 055 | "Drag and drop" function not possible |
| 056 | The InfoCube '&' cannot be planned |
| 057 | This characteristics combination already exists |
| 058 | &: The cursor must be positioned on a row |
| 059 | This function can only be performed in the key figure view |
| 060 | Invalid processing area: FROM period adjusted |
| 061 | Conversion is not supported for rows without units |
| 062 | Unit conversion not possible from & to & |
| 063 | LIKE profile has been deleted |
| 064 | & & & & |
| 065 | The number of decimal places is missing for at least one entry |
| 066 | Entry deleted: Combination planning book - row not unique |
| 067 | Entry deleted: Combination InfoCube - key figure not unique |
| 068 | All entries are error-free |
| 069 | Enter a description text |
| 070 | Entry cannot be interpreted as number |
| 071 | Incomplete entries were deleted |
| 072 | Incorrect entries were deleted |
| 073 | Macros successfully saved |
| 074 | Specify smoothing parameters between 0 and 1 |
| 075 | Selected location does not exist, entry will be deleted |
| 076 | Enter a planning book |
| 077 | History horizon (& buckets) smaller than one seasonal cycle |
| 078 | Enter a planning view |
| 079 | Requested action does not exist |
| 080 | Selection is locked, forecast cannot be executed |
| 081 | Entry & does not exist |
| 082 | Complete your entry |
| 083 | Incorrect entry: Entry will be deleted |
| 084 | Incorrect entry: Will be deleted and save process will be terminated |
| 085 | Enter the name of a set of historical value markings |
| 086 | It is recommended to set the persmo parameter to one |
| 087 | File '&' cannot be deleted as it still contains files |
| 088 | File cannot be created. Enter a name |
| 089 | The selection profiles are already being edited by & |
| 090 | An error occurred while locking the database & |
| 091 | "From" date comes after "to" date |
| 092 | Specify the first column ready for entry |
| 093 | Specify the first visible column |
| 094 | The file cannot be moved to its own location |
| 095 | User &1 does not exist |
| 096 | Nothing was selected |
| 097 | No suitable selection found |
| 098 | Internal error: & in routine & |
| 099 | Internal error: & |
| 100 | Maximum numer of & views has been reached |
| 101 | Planning book & has been deleted |
| 102 | Planning book & has been successfully saved |
| 103 | TO column earlier than FROM column -> FROM column adjusted |
| 104 | TO row earlier than FROM row -> FROM row adjusted |
| 105 | The planning book &1 is not defined for the InfoCube &2 |
| 106 | The key figure & was not defined in the planning book |
| 107 | Check made without errors |
| 108 | Generation completed: Macros saved |
| 109 | Key figure for corrected history &1 was not defined in planning book &2 |
| 110 | Key figure for corrected forecast &1 was not defined in planning book &2 |
| 111 | Factory calendar ID & does not exist or is not active |
| 112 | Material selected does not exist |
| 113 | Key figure for absolute promotion was not defined in the planning book |
| 114 | Function name is aready used |
| 115 | No selections deleted |
| 116 | Your order was completed successfully |
| 117 | User function was saved successfully |
| 118 | Planning book delivered by SAP -> no changes allowed |
| 119 | Settings for autom. column adjustment have been adapted |
| 120 | Period for date & cannot be determined |
| 121 | Version & deleted |
| 122 | Enter valid date range |
| 123 | Caution: Check consistency of imported macros |
| 124 | No version exists yet |
| 125 | All unique forecast profiles and assignments successfully deleted |
| 126 | Unique forecast profiles are now consistent |
| 127 | No corresponding planning data exists |
| 128 | Enter a version |
| 129 | Planning version contains no data, the actual data will be read |
| 130 | No data exists for version & |
| 131 | Time series data was successfully saved in the InfoCube |
| 132 | Time series data could not be saved in the InfoCube |
| 133 | Time series are now consistent |
| 134 | Time series are not yet consistent |
| 135 | The time series could not be copied |
| 136 | The time series was successfully copied |
| 137 | The specified time seried does not exist |
| 138 | Time series already exists |
| 139 | Update has started |
| 140 | Select an area for this operation |
| 141 | The time series data was not saved in the InfoCube |
| 142 | This InfoCube does not exist |
| 143 | This InfoCube has errors, or not all parameters have been maintained |
| 144 | Your selection does not exist in this InfoCube |
| 145 | Choose a valid row |
| 146 | The InfoCube data has not been written to the time series |
| 147 | The InfoCube data was written to the time series |
| 148 | Place cursor on suitable line |
| 149 | Incorrect entry & deleted |
| 150 | Duplicate entries deleted |
| 151 | Only one shift can be maintained for each product |
| 152 | Incorrect shift entry found and deleted |
| 153 | The LIKE profile specified does not exist in the database |
| 154 | Relevant entry could not be found |
| 155 | Currently no search parameters specified |
| 156 | An actuals row has already been created |
| 157 | Event rows already created |
| 158 | Enter the name of a profile |
| 159 | The alpha parameter should lie between 0 and 1 |
| 160 | The beta parameter should lie between 0 and 1 |
| 161 | Last member reached - processing will continue with first member |
| 162 | First member reached - processing will continue with last member |
| 163 | Position the cursor on a member row |
| 164 | Place cursor on a header row |
| 165 | The gamma parameter should lie between 0 and 1 |
| 166 | Specify a weighting group for forecast strategy 14 |
| 167 | A maximum of & characteristics can be displayed |
| 168 | Number characteristics in the desired order |
| 169 | The number & has been used more than once |
| 170 | Profile & for InfoCube & does not exist |
| 171 | Number the characteristics you want to see in the header |
| 172 | Your order could not be completed |
| 173 | Max. number of phases reached |
| 174 | Data already entered at total level - press ENTER before continuing |
| 175 | Planning horizon smaller than forecast horizon, data transfer not poss. |
| 176 | Planning horizon too small, transfer of historical data not possible |
| 177 | No forecast profiles exist for the InfoCube |
| 178 | Enter a name for the time series |
| 179 | The univariate profile is no longer assigned to the master profile |
| 180 | No long text exists |
| 181 | Enter a valid sender |
| 182 | The assigned Internet addresses only exist for internal users |
| 183 | The MLR profile is no longer assigned to the master profile |
| 184 | No time series have been created yet |
| 185 | The composite profile is no longer assigned to the master profile |
| 186 | The transaction was switched to display mode |
| 187 | The transaction was switched to the change mode |
| 188 | The diagnosis group does not exist |
| 189 | This function is not possible in display mode |
| 190 | Planning book & does not exist |
| 191 | Time series &1 used in forecast profile &2, deletion not possible |
| 192 | The univariate profile was assigned to the master profile |
| 193 | The MLR profile was assigned to the master profile |
| 194 | The composite profile has been assigned to the master profile |
| 195 | The single profile has been saved |
| 196 | Not possible to schedule job with status & - please reset status |
| 197 | Enter a name for delimiter group |
| 198 | The single profile could not be saved |
| 199 | Proportional factor cannot be selected |
| 200 | Version already exists |
| 201 | Enter numerical digits as the version number |
| 202 | Planning version & cannot be deleted yet |
| 203 | Complete your entry |
| 204 | Inconsistent aggregation/disaggregation entries |
| 205 | Planning object can only be displayed in a text row |
| 206 | Specify target planning version |
| 207 | Enter description for new planning version |
| 208 | Combination of InfoCube &/planning version & does not exist |
| 209 | Combination of InfoCube &1/planning version &2 already exists |
| 210 | InfoCube & does not exist |
| 211 | Invalid cursor position |
| 212 | Key figure & does not exist in InfoCube & |
| 213 | Version cannot copy itself |
| 214 | Periodicity & not contained in InfoCube & |
| 215 | Select at least one characteristic for grouping |
| 216 | Select a characteristic selection |
| 217 | Select a grouping |
| 218 | Specify to date |
| 219 | FROM and TO key figures must be specified together |
| 220 | Invalid proportions for & |
| 221 | Invalid proportions for product-independent location split |
| 222 | Serious internal error in batch run |
| 223 | Incorrect assignment of DP version to SNP version |
| 224 | Macro & is not defined for planning book & |
| 225 | No & is defined for planning book & |
| 226 | Selected category does not exist |
| 227 | No row was selected |
| 228 | No time series were deleted |
| 229 | & duplicate entries have been deleted |
| 230 | Serious internal error occurred during release |
| 231 | Key figure assignment is not possible |
| 232 | Release successfully executed |
| 233 | &: Invalid category |
| 234 | Invalid aggregation level |
| 235 | Error while reading time-based requirements distribution |
| 236 | Successful transfer to R/3 |
| 237 | & incorrect entries have been deleted |
| 238 | Assign at least one single profile to the master profile |
| 239 | No more values can be proposed for this planning area |
| 240 | The planning areas have been reassigned |
| 241 | Error while reading in the planning area |
| 242 | The master profile has only one profile for composite forecast |
| 243 | You must specify at least one characteristic |
| 244 | There are no settings that can be deleted |
| 245 | The database contains no entries for the planning area |
| 246 | Start- and end date must be maintained |
| 247 | No values exist for corrected history |
| 248 | Value &1 is not allowed for characteristic &2 |
| 249 | No planning view &2 is defined in planning book &1 |
| 250 | Requirements have been successfully released |
| 251 | Error releasing customer requirements |
| 252 | No activity exits for planning book & and planning view & |
| 253 | Enter a transfer profile |
| 254 | Release profile & does not exist |
| 255 | Release profile & has been successfully deleted |
| 256 | Job number & has already been assigned |
| 257 | No job with the number & exists |
| 258 | No model of this type has been defined for the forecast profile & |
| 259 | Select a relevant model |
| 260 | Please select a distribution grid |
| 261 | Enter a short text for the aggregation level |
| 262 | Agrregation level & is already defined |
| 263 | Define the aggregation conditions |
| 264 | No data for processing can be selected for job & |
| 265 | Error while reading the planning layout & |
| 266 | Reference view & should not be used |
| 267 | The activity &1 is already in use in a mass processing job: &2 |
| 268 | System error: & & & & |
| 269 | System error: The generation of selection variants was unsuccessful |
| 270 | Aggregation level & has not been defined |
| 271 | Inconsistency: Planning view & and planning area & of the fcst profile & |
| 272 | Error while reading the forecast profile |
| 273 | Error while reading the aggregation level & |
| 274 | Error while reading the InfoCube settings |
| 275 | No location has been defined for the InfoCube & in the planning parameter |
| 276 | Enter a business system group |
| 277 | No product defined for InfoCube & in the planning parameters |
| 278 | No characteristics combination has been maintained |
| 279 | No pegging ID can be determined for & & & & |
| 280 | No log ID can be determined for location & |
| 281 | No location split has been defined |
| 282 | Application error during release to liveCache |
| 283 | Invalid period indicator |
| 284 | Background job could not be created |
| 285 | Background job has no name |
| 286 | Delete background job |
| 287 | Background job & scheduled successfully |
| 288 | No job with the number & exists |
| 289 | No requirements exist for product & in the release period |
| 290 | The job's InfoCube does not correspond with the activity |
| 291 | Location & has not been defined |
| 292 | Error while reading factory calendar & |
| 293 | System error: Code generation failed |
| 294 | Macro & has been executed |
| 295 | Release to SNP has been succesfully carried out |
| 296 | No product available for release |
| 297 | No location available for release |
| 298 | Invalid planning strategy |
| 299 | No valid category found for strategy & |
| 300 | In the NUMBER field, only numbers are allowed |
| 301 | In the SEQUENCE field, only numbers are allowed |
| 302 | Error in location split |
| 303 | Invalid time buckets profile |
| 304 | Time buckets profile must consist exclusively of days |
| 305 | The planning parameter time characteristics are not correctly maintained |
| 306 | No planning objects selected |
| 307 | Saving of forecast profile failed: No name specified |
| 308 | Saving of forecast profile failed: InfoCube unknown |
| 309 | Saving of forecast profile failed: Selection ID missing |
| 310 | Only select the & promotion nodes |
| 311 | Saving of forecast profile failed: Planning version missing |
| 312 | Saving of master forecast profile for the last forecast failed |
| 313 | Error executing macro & |
| 314 | Version cannot be assigned: Cursor is outside table control |
| 315 | Version cannot be assigned: Variable is a time series |
| 316 | Transformation cannot be assigned: Cursor is not in table control |
| 317 | No forecast profile has been specified |
| 318 | This function is only possible in the promotion planning view |
| 319 | This function is only possible for the historical horizon |
| 320 | Specify the promotion in full |
| 321 | The horizon entered is not completely in the past |
| 322 | Promotion is active in the database. Deletion not possible |
| 323 | Transformation cannot be assigned: Variable is a time series |
| 324 | Enter the target promotion |
| 325 | Specify the target characteristic attribute |
| 326 | Enter the target version |
| 327 | Promotion copying not possible: Different periodicities |
| 328 | Promotion copying not possible: Different number of periods |
| 329 | The attribute &1 does not exist in the selection variant &2 |
| 330 | No values have been maintained yet for the selected promotion |
| 331 | The reference promotion does not exist for the attribute & |
| 332 | No reference promotion specified |
| 333 | Selection cannot be changed on a forecast tab page |
| 334 | Cannot uniquely determine which macro is to be executed -> Menu |
| 335 | Promotion & has no values defined |
| 336 | Define the promotion first |
| 337 | There are no forecast profiles for the specified infoCube |
| 338 | Promotions saved successfully |
| 339 | Selected horizon is too small for promotion calculation |
| 340 | Not enough periods for MLR calculation |
| 341 | Profile & successfully deleted |
| 342 | & created successfully |
| 343 | & could not be created |
| 344 | & was successfully changed |
| 345 | & could not be changed |
| 346 | Enter name of time buckets profile |
| 347 | Sequence numbering incorrect |
| 348 | The promotion muster & does not exist |
| 349 | Select a promotion |
| 350 | Enter the number of periods |
| 351 | Selection ID for application & is not maintained! |
| 352 | The selected period indicator does not correspond with the InfoCube |
| 353 | Specify a planning version |
| 354 | Specify a selection variant |
| 355 | Specify an InfoCube |
| 356 | No selections exist for your constraints |
| 357 | No profile could be determined for & |
| 358 | Settings saved |
| 359 | Settings not saved |
| 360 | Deletion successfully completed |
| 361 | You must make a selection first |
| 362 | Overwriting this selection is not permitted |
| 363 | Error deleting time series |
| 364 | First enter a planning book |
| 365 | No forecast profiles exist for the specified planning area |
| 366 | Forecast profile & already exists |
| 367 | Enter an existing planning area |
| 368 | Specified planning area &1 does not exist |
| 369 | No forecast profiles exist |
| 370 | Forecast profile cannot be stored: planning area unknown |
| 371 | Maintain basic settings for planning area &1 first |
| 372 | The chosen master forecast profile contains no profile for MLR |
| 373 | Planning area contains no key figure |
| 374 | This time buckets profile cannot be used for the forecast |
| 375 | Enter a time buckets profile |
| 376 | No results rows were created |
| 377 | To save the corrected event, please choose a key figure |
| 378 | The chosen time buckets profile does not exist |
| 379 | Max. 25 independent variables can be assigned to the MLR profile |
| 380 | The selection does not exist in this planning area |
| 381 | The chosen time buckets profile does not exist |
| 382 | Data from planning area has been written to the time series |
| 383 | Data from the planning area has not been written to the time series |
| 384 | The alert restriction specified does not exist - it has been deleted |
| 385 | Version for forecast profile is invalid for this planning area |
| 386 | The forecast results could not be saved |
| 387 | Several models exist, not possible to save |
| 388 | Several models exist, not possible to read |
| 389 | Docking container could not be created |
| 390 | Entries that only contain the version habe been deleted |
| 391 | Entries exist for which no version has been specified |
| 392 | No selection ID could be found or generated |
| 393 | Identical prgs for client & and &; reset: /SAPAPO/ADV_MACRO_CLIENT_RESET |
| 394 | Number of periods in time buckets profile is too small |
| 395 | Select relevant row |
| 396 | Forecast parameters have been initialized |
| 397 | No master prfl. exists to which suitable single profile has been assigned |
| 398 | No suitable single profile is assigned to master profile |
| 399 | This planning book can only be changed by its author |
| 400 | Error while reading meta data for the InfoCube & |
| 401 | No data exists for the selection made (see long text) |
| 402 | Characteristic already assigned |
| 403 | Characterstic does not exist |
| 404 | Assign all fields for Characteristics Planning |
| 405 | Specify InfoCube for data source origin |
| 406 | Valuation characteristic should not be included |
| 407 | Header data not complete |
| 408 | An error occurred while reading profile & |
| 409 | Profile & does not exist |
| 410 | Profile & already exists |
| 411 | Use the cursor in the table control to select a master profile |
| 412 | InfoCube specified is not a suitable data source |
| 413 | This action may delete an existing entry |
| 414 | Choose receipts |
| 415 | Choose issues |
| 416 | Choose stock |
| 417 | Choose target stock |
| 418 | Selection contains more than one version |
| 419 | The single profile & does not exist |
| 420 | Master forecast profile is currently locked |
| 421 | No relevant entries could be found |
| 422 | No selection marked |
| 423 | This selection is already contained in this folder |
| 424 | Expert mode switched off |
| 425 | Expert mode activated |
| 426 | This folder cannot be deleted |
| 427 | Select an SNP optimization run |
| 428 | NO key figure |
| 429 | Product check contained in DP model |
| 430 | Key figure & not in planning area & |
| 431 | Specify both key figures of comparison |
| 432 | Specify different key figures for comparison |
| 433 | Mark key figure & as visible for comparison |
| 434 | Planning area & does not exist |
| 435 | Check if location exists in the DP model |
| 436 | Orders created in planning version &1 planning area &2 for &3 and &4 |
| 437 | No demand exists |
| 438 | Invalid selection |
| 439 | Choose days' supply |
| 440 | Planning job created successfully |
| 441 | Planning job changed successfully |
| 442 | Planning jobs deleted |
| 443 | Status of job & has been reset |
| 444 | No planning jobs created |
| 445 | Choose target days' supply |
| 446 | Requested key figure not defined in InfoCube |
| 447 | Demands have already been released |
| 448 | The corrected history requested is not defined in InfoCube |
| 449 | The corrected forecast requested is not defined in InfoCube |
| 450 | The absolute promotion requested is not defined in InfoCube |
| 451 | Lifecycle planning cannot be executed |
| 452 | Macros can only be copied if rows are also copied |
| 453 | Reference scope not completely specified |
| 454 | Save has been canceled |
| 455 | Macro & saved |
| 456 | Macro not saved - no fully defined row exists |
| 457 | Enter the name of a macro |
| 458 | Requested key figure is not defined in planning area |
| 459 | Caution: User exit must be programmed |
| 460 | No autom. column adjustment possible for freely defined processing area |
| 461 | Actions already exist - planning book cannot be changed |
| 462 | Actions already exist - planning view cannot be changed |
| 463 | Maintain a fiscal year variant |
| 464 | Days' supply: Covered until end of planning horizon |
| 465 | Fiscal year variant will be deleted, no posting periods have been chosen |
| 466 | Owner is fixed. Entry is fixed on member level |
| 467 | Value '0' cannot be fixed |
| 468 | The value of this cell cannot be fixed |
| 469 | Value entered was smaller than its partial fixing. Value corrected. |
| 470 | Row & used in macro & |
| 471 | You cannot use the corrected history; definition is missing |
| 472 | Hist.val.markings only effective in conjunctn with standard outlier corr. |
| 473 | Only the first 10000 entries can be displayed |
| 474 | This information is not available |
| 475 | Enter numbers only |
| 476 | A maximum of 6 decimal places can be displayed |
| 477 | Enter a numerical value |
| 478 | Number cannot be greater than & |
| 479 | Number cannot be less than '1' |
| 480 | Error occured while reading InfoCube & |
| 481 | No time buckets profile is selected |
| 482 | Number of forecast + historical periods greater than & |
| 483 | Enter a period indicator |
| 484 | Specify a key figure |
| 485 | Start date is after end date |
| 486 | Specify a valid planning book |
| 487 | Enter planning view or reference view |
| 488 | Planning book & has already been created |
| 489 | Planning book & has not fully been defined |
| 490 | Please enter a valid InfoCube |
| 491 | Planning book - & - is not available |
| 492 | InfoCube & does not exist |
| 493 | Planning view & has already been created |
| 494 | Error assigning event & |
| 495 | Planning view & already defined in the current planning book |
| 496 | No further action exists |
| 497 | Activity was deleted successfully |
| 498 | Not possible to save an activity without an action |
| 499 | Time buckets profile & not defined |
| 500 | No forecast profile exists |
| 501 | This forecast profile does not exist |
| 502 | Not possible to carry out the forecast - no historical data |
| 503 | Not possible to carry out the forecast - basic value is zero |
| 504 | Composite forecast: Incorrect results with profile & and model & |
| 505 | Univariate forecast: Incorrect forecasts using profile & and model & |
| 506 | Composite forecast: Incorrect results with MLR profile & |
| 507 | Key figure & not defined for forecasting in this planning view |
| 508 | Period indicator chosen does not correspond with the specification |
| 509 | Forecast profile has been successfully saved |
| 510 | Forecast profile has been successfully deleted from the database |
| 511 | Not possible to delete the SAP group |
| 512 | Limits group was successfully saved |
| 513 | Limits group was successfully deleted |
| 514 | Specify forecast horizon |
| 515 | Specify historical horizon on which the forecast should be based |
| 516 | Not possible to define forecast horizon |
| 517 | Historical horizon falls within the forecast horizon |
| 518 | You can only enter numerical combinations for the version field |
| 519 | Enter the key figure for historical data |
| 520 | Incorrect entry in "Transformation" field |
| 521 | Enter numbers only in the "Weighting" field |
| 522 | Create a forecast profile using transaction /sapapo/MC96 |
| 523 | Forecast profile & does not exist |
| 524 | Please enter a forecast profile |
| 525 | Enter an InfoCube |
| 526 | Enter a key figure for the forecast |
| 527 | First enter an InfoCube |
| 528 | No profile has been defined for the composite profile |
| 529 | No profile has been defined for MLR |
| 530 | Error occurred while reading from InfoCube |
| 531 | Univariate forecast successfully executed |
| 532 | No weighting profile specified |
| 533 | Error while retrieving the organizational structure of the selelection |
| 534 | Error while deleting tree node(s) |
| 535 | Error while creating tree node(s) |
| 536 | The selected period key figure is not possible for the InfoCube |
| 537 | The version selected does not exist in the InfoCube |
| 538 | The selection tree cannot be refreshed |
| 539 | No valid forecast profile has been selected |
| 540 | Forecast cancelled |
| 541 | Specify the number of periods per season |
| 542 | No corrected history has been defined for the forecast key figure |
| 543 | Error reading the metadata for & |
| 544 | Entry not valid: Key figure does not exist in InfoCube |
| 545 | The InfoCube you have selected is incorrect |
| 546 | Forecast profile could not be saved |
| 547 | Choose a valid period indicator |
| 548 | Enter a text for the alert |
| 549 | Inconsistent data input |
| 550 | SDP alert profile & does not exist |
| 551 | Forecast alert profile & does not exist |
| 552 | Enter at least one alert profile |
| 553 | No SDP alert profile has been created yet |
| 554 | No forecast alert profile has been created yet |
| 555 | Composite forecast was completed successfully |
| 556 | Error occured when executing composite forecast |
| 557 | InfoCube & does not contain any characteristics for product |
| 558 | InfoCube & does not contain any characteristics for location |
| 559 | From-date is later than to-date |
| 560 | InfoCube & has no version & |
| 561 | Please choose different versions and/or key figures |
| 562 | InfoCube & has no key figure & |
| 563 | InfoCube & has no characteristic & |
| 564 | No characteristic could be determined for the version |
| 565 | Error occured while reading the data |
| 566 | Error occured while reading the planning parameters |
| 567 | Unit conversion for & from & to & is not possible |
| 568 | Planning layout (view) is already being edited |
| 569 | The period inicator is not allowed in this planning area |
| 570 | Choose one option only |
| 571 | Select up to & options |
| 572 | Choose an option |
| 573 | Not enough options were chosen |
| 574 | Enter a release profile |
| 575 | Enter a transfer profile |
| 576 | The period indicator cannot be used for this planning area |
| 577 | The manual forecast will be initialized |
| 578 | The manual entry of historical values will be terminated |
| 579 | The number of periods must be maintained for seasonal models |
| 580 | Only input values from &1 to &2 are valid |
| 581 | Product &1 does not exist |
| 582 | Product &1 does not exist in planning area &2 |
| 583 | LIKE profile does not exist in the database; deletion cancelled |
| 584 | Specify an existing LIKE profile |
| 585 | Specify a basic value |
| 586 | Specify a trend value |
| 587 | Specify seasonal indices |
| 588 | This function only supported for univariate forecasting |
| 589 | Planning view & & does not exist |
| 590 | InfoCube is not consistent with reference view (&) |
| 591 | Periodicity & does not exist in InfoCube |
| 592 | Fiscal year variants in time buckets profile and InfoCube are different |
| 593 | If macros book exists in target system -> regenerate macros in target |
| 594 | TLB alert profile & does not exist |
| 595 | TLB alert profile not yet created |
| 596 | Time series for trend dampening does not exist |
| 597 | Detected invalid products during value determination |
| 598 | Maximum number of fixed columns or rows has been reached |
| 599 | No key figures are available |
| 600 | No selection ID was defined |
| 601 | User parameter /SAPAPO/FCST_NK1 maintained incorrectly |
| 602 | Conversion of unit for product &1 is incorrect |
| 603 | Weighting group does not exist |
| 604 | Characteristic value &1 does not exist for characteristic &2 |
| 605 | Entries with identical characteristic values have been deleted |
| 606 | Entries without lifecycle profile have been deleted |
| 607 | Meta data successfully read and selections generated |
| 608 | These basic settings have already been saved |
| 609 | An offset in the forecast horizon has no effect for this constellation |
| 610 | An offset in past has no effect for this constellation |
| 611 | Enter either the from-date and to-date or the number of periods |
| 612 | Maintain exactly one profile field for each activity |
| 613 | Past horizon lies outside the initialization horizon |
| 614 | Forcast horizon lies outside the initialization horizon |
| 615 | Configuration: & & & |
| 616 | Entries exist without life cycle profiles |
| 617 | This selection ID already exists |
| 618 | Negative proportions not possible |
| 619 | Please specify a Diagnosis Group |
| 620 | Planning object does not exist |
| 621 | Enter a selection and grouping condition |
| 622 | Historical value markings do not exist |
| 623 | Specify at least one independent variable |
| 624 | Action must be cancelled |
| 625 | You are not recommended to have multiple forecast steps in one activity |
| 626 | You are not recommended to have forecast and macro steps in one activity |
| 627 | unique forecast profile: &1; assignments: &2 |
| 628 | Check authorization |
| 629 | Time series values deleted from & to & |
| 630 | No executable advanced macros have been created for the planning book yet |
| 631 | Read peg areas |
| 632 | Read orders |
| 633 | Not all combinations could be displayed, too many columns |
| 634 | Planning versions exist -> Factoy calendar cannot be changed |
| 635 | The key figure chosen is locked |
| 636 | At least one key figure is locked |
| 637 | Selection(s)/folder(s) copied |
| 638 | Job &1 is already running (number &2), no new job scheduled |
| 639 | Active filter does not contain time series of type &1 |
| 640 | Caution: Different time buckets in profile and planning book |
| 641 | You cannot switch to the forecast tab page from the key figures view |
| 642 | You cannot switch to the key figure view from the forecast tab pages |
| 643 | Chosen key figure does not exist |
| 644 | Chosen MLR profile does not exist |
| 645 | Chosen version does not exist |
| 646 | Chosen profile for composite forecasting does not exist |
| 647 | Profile chosen for composite forecast does not exist |
| 648 | No linking record for planning book & <-> view |
| 649 | Specify an InfoCube |
| 650 | No promotion key figures defined for the key figure |
| 651 | Forecast cannot be carried out using the weighting model |
| 652 | Enter forecast horizons |
| 653 | Either forecast horizon or history horizon cannot be determined |
| 654 | Planning parameters for key figure & are not fully defined |
| 655 | Forecast key figure does not correspond with a planning row |
| 656 | Time buckets profile & not found |
| 657 | Each selected entry needs a sequence number |
| 658 | Specify a forecast key figure |
| 659 | No time characteristics could be determined for the InfoCube |
| 660 | No key figures could be determined for & |
| 661 | Assign at least one of the key figures |
| 662 | The new entries are not unique |
| 663 | The new entry cannot be assigned |
| 664 | The old entry cannot be changed as requested |
| 665 | Promotion key figure must differ from forecast key figures |
| 666 | Internal forecast error 1 |
| 667 | Internal forecast error 2 |
| 668 | Maintain historical value markings for promotion |
| 669 | The to date cannot be determined without periodicity entry |
| 670 | Specify from date |
| 671 | Graphic settings successfully stored |
| 672 | You cannot switch off both the graphic and the grid at the same time |
| 673 | Function code & does not exist |
| 674 | Highest valid row item: & -> Specify a valid item |
| 675 | System error creating RFC destination 'CALL_MLR' |
| 676 | There are objects with no characteristic combinations in the like profile |
| 677 | The forecast strategy &1 in profile &2 cannot be used |
| 678 | Only the row of the time series can be changed |
| 679 | Product already in promotions list |
| 680 | Promotion has already been introduced |
| 681 | No promotion was selected |
| 682 | Time series has not changed |
| 683 | The user parameter /SAPAPO/FCST_NK3 is maintained incorrectly |
| 684 | Time series already exists |
| 685 | Enter the type of time series |
| 686 | Time characteristics: Entry not valid |
| 687 | Promotion already exists |
| 688 | Planning book does not exist |
| 689 | Planning view does not exist |
| 690 | Time buckets profile & does not exist |
| 691 | Not enough period lengths in PLENGTH |
| 692 | No time buckets profile for view & |
| 693 | InfoCube & does not have the necessary structure |
| 694 | InfoCube & already contains data --> Change not possible |
| 695 | Error occured while reading time characteristics for & |
| 696 | Error occured while reading key figures for & |
| 697 | Plan already exists |
| 698 | No record for planning book & |
| 699 | No view record for planning book & |
| 700 | Choose a valid row |
| 701 | No historical values exist |
| 702 | Not enough historical values for initialization |
| 703 | Basic value will be zero |
| 704 | An incorrect date has been specified |
| 705 | Incorrect validity period |
| 706 | Specify a function profile |
| 707 | Specify planning buckets profile |
| 708 | Time series & & is also being updated in another planning book |
| 709 | Time series & & already been saved on the DB with another grid -> changed |
| 710 | Error while reading characteristics for & |
| 711 | & & |
| 712 | Choose a row |
| 713 | Error generating function profile |
| 714 | Syntax errors |
| 715 | Not possible to delete an SAP profile |
| 716 | No forecast view has been defined in this planning book |
| 717 | No profile can be created here for composite forecasting or MLR |
| 718 | Not possible to change an SAP profile |
| 719 | The chosen profile cannot be used for univariate forecasting |
| 720 | The row is an event base row - it cannot be deleted |
| 721 | R**2 is smaller than the predefined lower limit |
| 722 | Adjusted R**2 is greater than R**2 |
| 723 | T test is too low |
| 724 | Durbin-Watson is too high |
| 725 | Durbin Watson is too small |
| 726 | Durbin h ist too small |
| 727 | R**2 is bigger than Durbin-Watson ==> risk of autocorrelation |
| 728 | MAPE is greater than the predefined limit |
| 729 | Error occured while reading InfoCube & |
| 730 | No macros defined yet for this application |
| 731 | Choose first row or special operation as appropriate |
| 732 | Choose an operation |
| 733 | Choose second row |
| 734 | Select row to display results |
| 735 | Choose header row |
| 736 | Choose member row |
| 737 | Macro & already declared |
| 738 | Macro not yet saved |
| 739 | This unit value does not exist |
| 740 | The MLR view is not defined in the planning book |
| 741 | Specified fiscal year variant does not exist |
| 742 | Selection variant & does not exist |
| 743 | No planning view has been maintained for InfoCube & |
| 744 | Selection variant & is not defined for InfoCube & |
| 745 | No selection variant has been maintained for InfoCube & |
| 746 | Choose a selection variant |
| 747 | No activity exists for background job & |
| 748 | No entries have been made yet |
| 749 | Time series & & is already being updated in the plan |
| 750 | No key figure(s) available for selection |
| 751 | Enter only positive period values |
| 752 | Enter offset smaller than number of historical values |
| 753 | Error converting units |
| 754 | Selection of analysis key figures and versions incorrect |
| 755 | Forecast cannot be carried out - planning book is incomplete |
| 756 | Missing weighting factors are assumed to be 100 % |
| 757 | Select a product before continuing with this step |
| 758 | Percentage calculation not possible |
| 759 | Enter time series type |
| 760 | MLR not possible with this data |
| 761 | Row of new time series will be calculated using the promotion |
| 762 | Promotion & already exists |
| 763 | Promotion & does not exist |
| 764 | Enter the date when the promotion starts |
| 765 | Enter the date when the promotion ends |
| 766 | Enter a start date that comes before the end date |
| 767 | Enter the period indicator of the promotion |
| 768 | No promotion has been selected for product & |
| 769 | Select the product before you continue |
| 770 | Internal condition &1 &2 &3 &4 not fulfilled |
| 771 | Time series already defined for another application |
| 772 | Variable has already been inserted |
| 773 | MLR error 1: Number of table rows not equal to predefined value |
| 774 | MLR error 2: Number of variables greater than 25 |
| 775 | MLR error 3: Insufficient number of autonomy levels |
| 776 | Grid attributes cannot be initialized |
| 777 | MLR error 4: The method does not converge |
| 778 | Error in periods for time-based disaggregation |
| 779 | MLR error 6 - no positive measuring error specified |
| 780 | MLR error 7: mlr.exe does not exist or destination is incorrect |
| 781 | No time buckets profile defined for the planning types |
| 782 | Destination 'CALL_MLR' does not exist - not possible to create direct |
| 783 | MLR error: 5 |
| 784 | Multi linear regression has been successfully completed |
| 785 | Multiple linear regression interrupted by an error |
| 786 | First select a characteristic attribute |
| 787 | Select the appropriate radio button |
| 788 | Maintain an appropriate forecast profile |
| 789 | Not possible to define the history horizon |
| 790 | Error reading key figure data |
| 791 | Product & not defined by the selections |
| 792 | Specify the characteristic attribute |
| 793 | Specify the application type of the promotion |
| 794 | No entries have been deleted |
| 795 | Profile & has already been created |
| 796 | Forecast profile does not exist in the database |
| 797 | Entries have been successfully deleted |
| 798 | Specify the forecast strategy |
| 799 | Define variables for multiple linear regression |
| 800 | Not possible to format date for output |
| 801 | Invalid date (contains characters other than 0-9) |
| 802 | Fiscal year variant is obligatory for period indicator 'P' |
| 803 | The specified date is changed using the factory calendar |
| 804 | Enter the promotion type |
| 805 | An error occured while reading the characteristic descriptions |
| 806 | Forecast accuracy profile successfully checked |
| 807 | Date & invalid |
| 808 | Factory calendar ID not found |
| 809 | Factory calendar day comes after end of factory calendar |
| 810 | Factory calendar day comes before start of factory calendar |
| 811 | Invalid factory calendar day |
| 812 | Factory calendar ID missing |
| 813 | Factory calendar missing |
| 814 | Invalid week |
| 815 | Error determining last day of a period (period indicator P) |
| 816 | Error determining period (period indicator: P) for a date |
| 817 | Date specification from... and to... not in ascending order |
| 818 | Error setting up historical values table |
| 819 | Error setting up periods table: from... greater than to... |
| 820 | Invalid period (contains characters other than 0-9) |
| 821 | Multiple linear regression could not be executed |
| 822 | Distribution function already exists |
| 823 | Distribution function deleted successfully |
| 824 | Length of function set to & |
| 825 | Sum of indiv. values <> 100%. Not possible to save |
| 826 | Distribution function does not exist |
| 827 | Different type of time series with the same name already exists |
| 828 | Enter a distribution function |
| 829 | No values maintained yet for time series & |
| 830 | No advanced macros have been defined for this application |
| 831 | Horizon of time series & lies outside forecast horizon |
| 832 | Start of time series & lies before start of forecast horizon |
| 833 | End of time series & lies after end of forecast horizon |
| 834 | Time series & already inserted |
| 835 | Time series successfully deleted |
| 836 | The user parameter /SAPAPO/FCST_NK2 is maintained incorrectly |
| 837 | User parameter /SAPAPO/FCST_LIKE has been maintained incorrectly |
| 838 | Release has not been made (consumption group <> '&1') |
| 839 | Table conversion was successful |
| 840 | Input error &1 in row &2: See long text |
| 841 | The time buckets profile & has been saved |
| 842 | The time buckets profile & has been successfully deleted |
| 843 | Time buckets profile name & is used for other applications |
| 844 | Time buckets profile & already used (deletion not possible) |
| 845 | Naming convention violation |
| 846 | F4 input help is active |
| 847 | Selections '&1' and '&2' do not have the same aggregation level |
| 848 | Aggregation level has been adjusted in accordance with your selections |
| 849 | User &1 already processing time buckets prfl &2: Display only |
| 850 | Distribution function & was saved |
| 851 | Characteristic &1 can not be used, it is compounded |
| 852 | Complete your entry |
| 853 | Generation of proportional factors completed |
| 854 | Reserved group names and icons must not be chosen |
| 855 | Error generating a custom control |
| 856 | Error generating a tree control |
| 857 | Error registering the tree events |
| 858 | The existing independent demands have not been selected for transfer |
| 859 | Independent requirements for demand category &1 not selected for transfer |
| 860 | Error while reading product master for product & |
| 861 | Location ID for location & cannot be determined |
| 862 | Error determining horizon for mean absolute deviation (MAD) |
| 863 | & |
| 864 | Product/location not selected for transfr despite uncovrd independnt rqmt |
| 865 | Error reading material master data |
| 866 | Product master data for & & not fully maintained |
| 867 | Meam absolute deviation (MAD) for & & could not be read |
| 868 | Error in TmBcktPrfl: Period prfl. &1 resource &2 location &3 plng vers.&4 |
| 869 | Enter correct value |
| 870 | Select a planning area |
| 871 | Number of Characteristics Combinations for Selection: &1 |
| 872 | Periodocity & is not in planning area & |
| 873 | Enter key figures first |
| 874 | Product &1 location &2 selected for optimization, but no indep. demand |
| 875 | & APO - Entries will be changed |
| 876 | Number of Hits for Selection: &1 |
| 877 | Other error |
| 878 | Choose a value |
| 879 | Time stream data deleted successfully |
| 880 | Entry cannot be interpreted as floating point number |
| 881 | Exponent is too large |
| 882 | Exponent is too small |
| 883 | Too many decimal places |
| 884 | & R/3/APO - entries will be deleted |
| 885 | & APO entries deleted |
| 886 | Enter a planning version |
| 887 | Enter a package size that is less than 1000 |
| 888 | Enter a positive package size value (> 0) |
| 889 | Number of Characteristics Combinations for Selection: &1 |
| 890 | Select exactly one selection |
| 891 | Enter a job number |
| 892 | The selection is accessing data that is currently locked by & |
| 893 | Time stream data will be deleted |
| 894 | The calculated safety stocks were successfully booked |
| 895 | Error reading InfoCube |
| 896 | Metadata of InfoCube could not be read |
| 897 | Entry for & is not unique |
| 898 | Conflict with Forecast Settings of Planning Area |
| 899 | Credit card number is not valid |
| 900 | Error in creation of ActiveX component: &1 |
| 901 | Time stream data deleted successfully |
| 902 | Key figures for inventory fluctuation and forecast must be different |
| 903 | The drilldown to be performed could be time-consuming |
| 904 | The system has adjusted the from/to dates with the storage buckets profle |
| 905 | Method "MLR Forecasting Using POS Data" not possible for master profile & |
| 906 | Choose a diagnosis group that is appropriate for your MLR method |
| 907 | Generation status was reset |
| 908 | Selection profile already exists for user & |
| 909 | Diagnosis Group was saved successfully |
| 910 | Unexpected system situation or behavior; contact system administrator |
| 911 | Unit conversion is not possible from &2 to &3 for product &1 |
| 912 | Diagnosis Group was deleted successfully |
| 913 | MLR profile with history key figure &1, version &2 not found |
| 914 | Folder name cannot be changed; specify a name |
| 915 | MLR profile must have history key figure &1, version &2 |
| 916 | When you apply seasonality, periods must be more than 0 |
| 920 | Folder already exists |
| 931 | Event catalog &1 is not assigned to planning area &2 |
| 950 | Error calling OCX method: &1 |
| 952 | Enter an event catalog ID |