/SAPAPO/MAT - Messages for material master maintenance
The following messages are stored in message class /SAPAPO/MAT: Messages for material master maintenance.
It is part of development package /SAPAPO/MAT in software component SCM-BAS-MD-PR. This development package consists of objects that can be grouped under "Material Master".
It is part of development package /SAPAPO/MAT in software component SCM-BAS-MD-PR. This development package consists of objects that can be grouped under "Material Master".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ********** Object does not exist******************* |
| 001 | Product &1 does not exist |
| 002 | Product &1 for location &2 does not exist |
| 003 | Product &1 for location &2 in model &3 does not exist |
| 004 | Lot size profile &1 does not exist |
| 005 | Specified product/location combination not found |
| 006 | There is no text for the specified product |
| 007 | Requirement profile &1 does not exist |
| 008 | SNP: Demand profile &1 does not exist |
| 009 | SNP: Supply profile &1 does not exist |
| 010 | Deployment profile &1 does not exist |
| 011 | Location &1 does not exist |
| 012 | Configurable product & does not exist |
| 013 | No product found |
| 014 | Error during database call |
| 015 | Unqualified function call &1 |
| 016 | Planning object &1 not found |
| 017 | Product location not found |
| 018 | Location &1 does not exist |
| 019 | No model has been assigned to planning version &1 |
| 020 | Product allocation procedure group is ignored |
| 021 | Account assignment object '&1' does not exist |
| 022 | External product number for product &1 does not exist |
| 023 | Product &1 is currently locked by user &2 |
| 024 | Product &1 for location &2 does not exist in planning version &3 |
| 025 | Planning version &1 does not exist |
| 026 | Position the cursor on a valid line |
| 027 | No change documents for specified selection |
| 028 | Product &1 &2 cannot be deleted because dependent objects exist |
| 029 | Product &1 was created in a different business system group &2 |
| 030 | System & not assigned to any business system group |
| 031 | No simulation parameters could be set for the active version |
| 032 | Maintain the ATP display unit of measure |
| 033 | Base unit of measure &1 does not exist (Product &2 has not been created) |
| 034 | Base unit of measure &1 does not exist |
| 035 | Conversion to alternative unit of measure &1 has already been defined |
| 036 | Denominator and numerator may not be less than 1 |
| 037 | Base unit of measure must not be deleted |
| 038 | Base unit of measure for product &1 cannot be changed |
| 039 | Check conversion to alternative units of measure |
| 040 | Product for external product number &1 and BSG &2 does not exist |
| 041 | Background job cannot be created |
| 042 | Background job has no name |
| 043 | Background job does not have valid start date |
| 044 | Scheduling of background job terminated |
| 045 | Unit &1 still used for lot size conversion |
| 046 | Unit &1 still used for conversion |
| 047 | Deletion flag set for product &1 |
| 048 | Deletion flag set for product &1 in location &2 |
| 049 | Not possible to set deletion flag (Product &1 does not exist) |
| 050 | Not poss. to set del. flag (Prod. &1 for loc. &2 type &3 does not exist) |
| 051 | Deletion not possible (Orders (&3, &4) still exist for product &1 &2) |
| 052 | Product &1 &2 cannot be deleted because LC orders exist |
| 053 | Product &1 &2 cannot be deleted because DB orders exist |
| 054 | Location product &1 &2 not removed from model &3 (Check version &4) |
| 055 | Product &1 deleted |
| 056 | Product &1 in location &2 deleted |
| 057 | Product &1 blocked. &2. Repetition of inbound processing |
| 058 | Product &1 blocked (Necessary to resend) |
| 059 | Creation not possible (Mapping for product &1 already exists &2 &3 &4) |
| 060 | Creation not possible (Product &1 already exists) |
| 061 | Creation not possible (Product &1 already exists in location &2) |
| 062 | Product &1 at location &2 in planning version &3 already exists |
| 063 | First unset deletion flag for product |
| 064 | Invalid date format & of penalty costs for product & |
| 065 | Invalid date format & of penalty costs for product &, location & |
| 066 | &1. Product &2 &3 |
| 067 | Field &1 unit missing for product &2 &3 |
| 068 | No selection specified |
| 069 | Enter the product group type |
| 070 | Dynamic pegging not used |
| 071 | Values for location &1 passed on |
| 072 | Planning package & is of type "automatic maintenance" |
| 073 | Product & cannot be deleted because quota arrangements still exist |
| 074 | Enter a product and a location |
| 075 | Product group does not exist (Check entries) |
| 076 | Product group type already exists (New entries have been deleted) |
| 077 | Deployment with existing rules cannot consider customer/forecast demands |
| 078 | No inheritance data maintained for location &1 and version &2 |
| 079 | Enter an alternative product number |
| 080 | Enter a unit of weight |
| 081 | Enter a maximum weight |
| 082 | Enter a volume unit |
| 083 | Enter a maximum volume |
| 084 | Enter a maximum weight and a unit of weight |
| 085 | Enter a maximum volume and a unit of volume |
| 086 | Enter a maximum capacity |
| 087 | Packaging mat. data will not be saved unless you specify pack. mat. type |
| 088 | Maximum volume may not exceed actual volume |
| 089 | Other data has been maintained in Customizing for this pack. mat. type |
| 090 | Enter unit for maximum packed length/width/height |
| 091 | Specify a minimum quantity |
| 092 | Specify a maximum quantity |
| 093 | Enter a replenishment quantity |
| 094 | The minimum quantity must not exceed the maximum quantity |
| 095 | The replenishment quantity must not exceed the maximum quantity |
| 096 | Unit of measure &1 not maintained for material &2 |
| 097 | Specify a unit of measure |
| 098 | Specify a time unit for quarantine period |
| 099 | Enter type of alternative product number |
| 100 | *************** Input errors ************************** |
| 101 | Product number not specified |
| 102 | Minimum lot size greater than maximum lot size |
| 103 | Creation not possible (Product & already exists) |
| 104 | Creation not possible (Product &1 already exists in location &2) |
| 105 | No product could be determined for EAN/UPC code &1 |
| 106 | Produkt &2 already exists (Not possible to rename product &1) |
| 107 | Enter valid value for late delivery penalties |
| 108 | Base unit of measure for Product &1 cannot be changed to &2. |
| 109 | &1 not a valid category group |
| 110 | Enter a valid value |
| 111 | Enter a valid plant |
| 112 | Enter a valid planning area |
| 113 | Enter a valid customer |
| 114 | Enter a valid vendor |
| 115 | Enter a valid lot size profile |
| 116 | Enter a valid requirement profile |
| 117 | Enter a valid SNP demand profile |
| 118 | Enter a valid SNP supply profile |
| 119 | Enter a valid deployment profile |
| 120 | Only penalty costs of quantity profile are considered |
| 121 | Unit conversion for quantity profile &1 to base UoM &2 not possible |
| 122 | The UOM of the serial number profile must be identical to the log. UoM |
| 123 | Default Penalty Costs with Penalty Cost Group '0000' can not be deleted |
| 124 | Penatly Costs with initial values are not saved to the database |
| 125 | Creation not possible (Lot-size profile &1 already exists) |
| 126 | Creation not possible (Requirement profile &1 already exists) |
| 127 | Creation not possible (SNP demand profile &1 already exists) |
| 128 | Creation not possible (SNP supply profile &1 already exists) |
| 129 | Creation not possible (Deployment profile &1 already exists) |
| 130 | Demand profile &1 and penalty cost group &2 already exist |
| 131 | Enter maximum packed length/width/height for unit of measure |
| 132 | Minimum quantity must be 0 for first interval |
| 133 | Quantity profile &1 does not exist |
| 134 | Name of quantity profile cannot be initial |
| 135 | Lot size profile &3 not deleted (Reference to product &1, location &2) |
| 136 | Requirement profile &3 not deleted (Reference to product &1, location &2) |
| 137 | SNP demand profile &3 not deleted (Reference to product &1, location &2) |
| 138 | SNP supply profile &3 not deleted (Reference to product &1, location &2) |
| 139 | Deployment profile &3 not deleted (Reference to product &1, location &2) |
| 140 | Leading blanks not allowed for product number &1 |
| 141 | Product number &1 contains disallowed special characters |
| 142 | Alert thresholds for due date/time alerts must be within pegging interval |
| 143 | Maximum earliness or lateness must be less than 277777 hours |
| 144 | Shelf life must not be shorter than maturation time |
| 145 | Interval duration missing for split of continuous demands or receipts |
| 146 | No supplying plant defined for product &1 |
| 147 | Serial numbers already assigned to this material |
| 148 | Character '&1' not allowed as separator |
| 149 | Product number &1 contains characters that are not code-page neutral |
| 150 | Unit conversion for product &1 from &2 to base UoM &3 not maintained |
| 151 | Name of Deployment Characteristics Profile cannot be initial |
| 152 | Profile &1 is still refered by product &2 at location &3 (plng. vrs.: &4) |
| 153 | Profile &1 is still refered by product &2 at location &3 |
| 154 | Instruction to be passed on to the database is too extensive |
| 155 | Planning with too many characteristics could greatly increase runtime |
| 156 | Unit &1 does not exist system wide. &1 not created as alternative UoM. |
| 157 | Data not changed |
| 158 | Mandatory field &1 &2 is not filled |
| 159 | Requirement type & for shortage quantity costs is invalid |
| 160 | Stockout costs for non-delivery adjusted |
| 161 | Stockout costs not adjusted |
| 162 | Stockout costs for non-delivery cannot be adjusted |
| 163 | Negative stockout costs not allowed |
| 164 | Profile cannot be deleted, as it is used in Products |
| 165 | Pick/pack time may not exceed goods issue processing time &1 &2 &3 |
| 166 | Serial Number Profile &1 does not exist |
| 167 | Main GTIN/EAN for the UoM &1 is not unique; the system deletes duplicates |
| 168 | GTIN/EAN &1 is already used for product &2 |
| 169 | Some GTIN/EAN entries are invalid; check entries |
| 170 | Number of periods &1 for period indicator &2 too large (&3 &4) |
| 171 | Specify a period type |
| 172 | Specify a planning calendar |
| 173 | Enter a reorder point method |
| 174 | Planning calendar does not exist |
| 175 | Fixing time-spot must be greater than PP/DS fixing horizon &1 &2 |
| 176 | Maximum lot size must be a multiple of the rounding value |
| 177 | Minimum lot size should be a multiple of the rounding value |
| 178 | Specify a fixed lot size |
| 179 | Specify a number of periods |
| 180 | Profile & for delivery time quota arrangement does not exist |
| 181 | Specify a period factor between 0 and 1 |
| 182 | Rounding value must be smaller than maximum lot size |
| 183 | PP/DS horizon adjusted to SNP production horizon |
| 184 | Change number for material & does not exist in SAP APO |
| 185 | Product version & has no header product |
| 186 | Enter a number of days |
| 187 | Rounding profile does not exist |
| 188 | Maximum stock level lower than reorder point |
| 189 | Specify assembly scrap in percent |
| 190 | The planning time fence cannot be saved in this planning version |
| 191 | No forward consumption period in case of backward consumption |
| 192 | Reorder point lower than safety stock level |
| 193 | Maximum stock level lower than safety stock |
| 194 | Product data &1 for warehouse &2 and storage type &3 not saved |
| 195 | Product data &1 for warehouse &2 not saved |
| 196 | Product &1 was not saved |
| 197 | Product data &1 for location &2 not saved |
| 198 | Planning version &3 for product &1 for location &2 was not saved |
| 199 | Save denied (prioritized changes made &1 &2) |
| 200 | Data saved |
| 201 | Product &1 saved |
| 202 | Lot size profile &1 saved |
| 203 | Rounding quantity, minimum and maximum lot size set to fixed lot size |
| 204 | Requirement profile &1 saved |
| 205 | SNP demand profile &1 saved |
| 206 | SNP supply profile &1 saved |
| 207 | Planning version &3 for product &1, location &2 saved |
| 208 | Deployment profile &1 saved |
| 209 | Product data &1 for location &2 saved |
| 210 | Product data &1 for warehouse &2 saved |
| 211 | Product data &1 for warehouse &2 and storage type &3 saved |
| 212 | Current GTIN/EAN will be deleted; see long text |
| 213 | Unknown reference product &1 for packaging in product &2 |
| 214 | GTIN/EAN &1 is already used for unit of measure &2 of this product |
| 215 | Lot size profile &1 deleted |
| 216 | Requirement profile &1 deleted |
| 217 | SNP demand profile &1 deleted |
| 218 | SNP supply profile &1 deleted |
| 219 | Deployment profile &1 deleted |
| 220 | Background job scheduled successfully |
| 221 | Specify a length or a template |
| 222 | Length & does not match the template |
| 223 | Length of product number must not exceed & |
| 224 | Complete product number cannot exceed & characters in length |
| 225 | Version number can be max. & characters long |
| 226 | Length of product no. + version no. > length of complete material no. |
| 227 | Product number longer than &1 characters (EDI capability restricted) |
| 228 | Use of product versions not activated in plant |
| 229 | Generic searches not allowed |
| 230 | Product & does not exist or has no versions |
| 231 | Too many objects were selected |
| 232 | GTIN/EAN &1 used for different UoMs (&2 and &3) of this product |
| 233 | SNP production horizon of product &1 in location &2 is negative |
| 234 | SNP stock transfer horizon of product &1 in location &2 is negative |
| 235 | Error reading table /SAPAPO/TMCNV (display format product); RC=& |
| 236 | Template format is & |
| 237 | The previous GTIN/EAN will be overwritten |
| 238 | Wrong combination of parameters &1 and &2 for field &3 |
| 239 | Select the "Main GTIN/EAN" checkbox for at least one entry of UoM &1 |
| 240 | Length of material number exceeds current setting |
| 241 | Entry too long (format is &) |
| 242 | Product &1, location &2: Maximum stock level below reorder point |
| 243 | Product &1, location &2: Reorder point below safety stock level |
| 244 | Product &1, location &2: Maximum stock level below safety stock level |
| 245 | Product &, location &: DRP start date later than DRP end date |
| 246 | Prod. &, location &: Deployment start date later than deployment end date |
| 247 | Batch management requirement cannot be changed |
| 248 | Alt. Unit of Measure can't be deleted: Open stock exists for this UoM |
| 250 | Heuristic &1 does not exist |
| 251 | Heuristic &1 is not allowed to be entered in the Product Master |
| 252 | Enter a planning package |
| 253 | Profile &1 does not exist for location &2 |
| 255 | Period profile &1 does not exist |
| 260 | Consumption group &1 not set in &2 &3 &4 as there are existing orders |
| 261 | Consumption group &1 cannot be set (Error(s) &2 in check &3) |
| 262 | Consumption group &1 not deleted in &2 &3 &4 as there are existing orders |
| 265 | Numerical product numbers already exist in system |
| 270 | Specify quantity |
| 271 | Tare weight and closed packaging are set according to Customizing |
| 274 | Planning calendar &1 does not exist |
| 281 | Product &1 still used in plan &2 (Deletion not possible) |
| 282 | Config. product &1 referenced by LocProd. &2 &3 (Deletion not possible) |
| 283 | Configurable product &1 referenced by product &2 (Deletion not possible) |
| 284 | Product &1 used in ext. procurement relationship (Deletion not possible) |
| 285 | Ext. procurement relationship uses LocProd &1 &2 (Deletion not possible) |
| 286 | Configurable product &1 referenced by location product &2 &3 not found |
| 287 | Configurable product &1 referenced by product &2 not found |
| 288 | Error in classification system &1 |
| 289 | Relationship &2 &3 (type &4) still uses prod. &1 (Deletion not possible) |
| 290 | Use of product &1 for location &2 in interchangeability |
| 291 | RTO (&3) references location product &1 &2 |
| 292 | Product split uses product &1 (&2) (Not possible to delete) |
| 293 | Product split uses product &1 (Not possible to delete) |
| 294 | Storage type data already exists for storage type &1 |
| 295 | Storage type data for storage type &1 flagged for deletion |
| 296 | Storage type data already exists for storage type &1 |
| 297 | Warehouse data not maintained for product &1 |
| 298 | "Party entitled to dispose" not maintained as business partner |
| 299 | Warehouse number &1 not assigned to a supply chain unit |
| 300 | *********************** Missing parameters******************************* |
| 301 | Product not specified |
| 302 | Location not specified |
| 303 | Account assignment not specified |
| 304 | Logical business system could not be determined |
| 305 | Storage bins cannot be displayed |
| 310 | Specify valid PP planning procedure |
| 311 | PP planning procedure &1 invalid |
| 312 | PP planning procedure &3 cannot be changed (Prod: &1 Loc.: &2) |
| 313 | Inconsistencies in Include CI_MATKEY (product &1, &2) |
| 314 | Inconsistencies in Include CI_MATLOC (product &1, location &2) |
| 320 | Job: &1 &2 Could Not Be Opened (&3) |
| 321 | Failed to close Job: &1 |
| 330 | Slotting status not allowed |
| 331 | Storage data for product &1 already exists |
| 332 | No default "party entitled to dispose" maintained for warehouse no. &1 |
| 333 | Adopt data for storage type &1? |
| 334 | Warehouse data for product &1 does not yet exist |
| 335 | Party entitled to dispose &1 not assigned to warehouse number &2 |
| 340 | Packaging material type &1 unknown |
| 360 | Minimum quantity must be 0 for first interval |
| 365 | Table MATLWH already contains an entry with mat. &1 and plant &2 |
| 366 | No corresponding entry to warehouse &1 in cust. table /SCWM/T300_MD |
| 367 | Table MATLWHX already contains an entry with mat. &1, SCU &2, entitled &3 |
| 368 | Plant &1 has no entitled (Business partner with role CRM011 = plant) |
| 369 | No mapping available for ERP material type &1 and a product group |
| 400 | ********************Incorrect input************************************* |
| 401 | Division by 0 not possible (Change your input) |
| 402 | Value & will be set to initial |
| 403 | Either direct value entry or calculation |
| 404 | Enter an arithmetic operator |
| 405 | Rounding value must be larger than threshold value |
| 406 | Planng and ind. cust. planng w/o fin. assem. not possible simultaneously |
| 407 | Procurement costs cannot be lower than the costs of repair |
| 408 | Costs of repair cannot be higher than the procurment costs |
| 409 | PP planning group &1 invalid |
| 410 | Entered number of periods is too big, value was adjusted |
| 411 | ABC indicator &1 is invalid |
| 412 | Costs of repair cannot be higher than the procurment costs (&1 &2) |
| 451 | Enter value for unit |
| 452 | Enter unit for value |
| 453 | The Gross weight is smaller than the Net weight |
| 460 | Product group type &1 invalid |
| 461 | Product group &2 not defined for product group type &1 |
| 462 | No location product found |
| 463 | Minimum shelf life exceeds maximum shelf life |
| 464 | Required minimum shelf life exceeds shelf life |
| 465 | Required maximum shelf life shorter than shelf life |
| 466 | Period indicator for shelf life expiration reset to duration in days |
| 470 | Replenishment indicator &1 invalid |
| 471 | OEMMI-flag can only be set for customer locations ( &1 &2 ) |
| 480 | User and time field must both be either empty or populated |
| 500 | ******************DB Save************************************************ |
| 501 | Error changing product data |
| 502 | Error creating product data |
| 503 | Error deleting product data |
| 504 | Error during database update of product data |
| 505 | Error converting table & |
| 506 | Error converting table & |
| 507 | &1 entries in table &2 changed |
| 600 | ******************DB Save*********************************************** |
| 601 | Error changing location-dependent product data |
| 602 | Error creating location-dependent product data |
| 603 | Error deleting location-dependent product data |
| 604 | Error during database update of location-dependent product data |
| 700 | ****************** Time Dependent Entries ***************************** |
| 701 | Start date/time may not lie in the past (&1 &2 &3 &4) |
| 702 | End date/time must come after start date/time (&1 &2 &3 &4) |
| 703 | Start date/time must come after end dt./time of predecessor (&1 &2 &3 &4) |
| 704 | Error calling FM &1 (&2 &3 &4) |
| 705 | Field &1 of table &2 is not time-dependent (&3 &4) |
| 706 | Error deleting time-dependent data from table & |
| 707 | Reorganization of time-dependent data successfully completed! |
| 708 | Error changing location-dependent product data &1 |
| 709 | Cost function does not exist or is not of type 'F' |
| 710 | Choose field name for dissolution of time dependency |
| 750 | ****************** Enhancement Concept ********************************** |
| 751 | Basis for generation (structure &1) not yet created |
| 752 | Structures &1 and &2 are incompatible with each other |
| 753 | Generation of screen &2 (report &1) terminated |
| 754 | Screen &2 (report &1) already exists |
| 755 | Screen description &2 (report &1) incorrect |
| 756 | Error generating screen &2 (report &1) - Backup has taken place |
| 757 | Error generating report &1 - Backup has taken place |
| 758 | Package &1 does not exist |
| 759 | Choose a package |
| 760 | Action cancelled |
| 761 | CI generation currently locked by another user |
| 770 | Information on "Create/Change/Delete Customer Include" |
| 771 | Information on "database conversion" |
| 772 | Information on "Activate Customer Include" |
| 773 | Information on "Generate/Delete Customer Include for BAPI X Fields" |
| 774 | Information on "Generate/Delete Maintenance Objects" |
| 775 | Information on "Generate Change Document" |
| 776 | Information on "Generate BW Extractor" |
| 800 | Error writing change documents for product |
| 801 | Error writing change documents for location product |
| 803 | Date already exists |
| 804 | Not necessary to enter a planner |
| 805 | Negative stockout costs for product & ignored |
| 806 | Negative stockout costs for product &1, location &2 ignored |
| 807 | Negative stockout costs for product &1, location &2, version &3 ignored |
| 808 | Enter the user name |
| 809 | Enter a planner |
| 810 | Error writing change documents for SNP supply profile |
| 811 | Error writing change documents for PP/DS requirement profile |
| 812 | Error writing change documents for lot-size profile |
| 813 | Error writing change documents for SNP demand profile |
| 814 | Error writing change documents for deployment profile |
| 815 | Enter the planner or give the user all planning rights |
| 816 | User already assigned because he or she has all planning rights |
| 817 | Assignment of stand. planner not possible (User has all planning rights) |
| 818 | User is already assigned to a standard planner |
| 819 | Only one product group type can be relevant to the transportation lane |
| 820 | Only one product group type can be the external material group |
| 821 | Enter a value for the product group |
| 822 | Enter a product group type |
| 823 | A product group type cannot be simultaneously TL and QT relevant |
| 824 | There can be only one TL- or QT-relevant product group type |
| 825 | Product unit of measure is not convertible |
| 826 | Product unit of measure is not convertible |
| 830 | Unit of measure category A or B can only be changed if no stock exists |
| 831 | Only one unit of measure category can be set to A or B |
| 832 | UoM category C only allowed, if UoM with category A or B exists |
| 833 | Plan explosion cannot be changed. Orders exist. |
| 834 | Plan explosion should not be changed. Orders still exist. |
| 850 | ****************** Material master enhancements in S/4 ****************** |
| 851 | Create plant &1 as SCM location |
| 852 | Advanced Planning and Extended SPP cannot be active at the same time |
| 853 | Create MRP area &1 as SCM location |
| 854 | Changing the replenishment indicator to �ND� is not allowed |
| 855 | Changing the planning status from '&1' to '&2' carries risks |
| 856 | The Where-Used Check found references for material &1 in plant &2 |
| 857 | Material &1 in plant &2: Indicator for &3 cannot be reset using BAPIs |
| 858 | The Where-Used Check found references for material &1 in MRP area &2 |
| 859 | Material &1 in MRP area &2: Deletion not possible due to planning status |
| 860 | Material &1 on SCM location &2 has replenishment indicator '&3' |
| 861 | Material &1 on SCM location &2 is associated with BOD &3 |
| 862 | iPPE prerequisite No. '&1' is not met; see long text |
| 863 | &1: Extended Service Parts Planning is still active in plant &2 |
| 864 | Non-Delivery penalty has been adjusted. |
| 865 | Maximum Delay has been adjusted. |
| 870 | Mapping for product &1 does not exist. |
| 871 | Mapping for location &1 does not exist. |
| 872 | Specify a period factor for TDS between 0 and 1 |
| 897 | &1 |
| 898 | Function module &1 does not exist |
| 899 | & & & & |
| 900 | &1 |
| 950 | Customer exit: &1, &2, &3, &4 |