/SAPAPO/OM_TS - Messages for OM Management of Time Series Objects
The following messages are stored in message class /SAPAPO/OM_TS: Messages for OM Management of Time Series Objects.
It is part of development package /SAPAPO/OM_BASIS in software component BC-DB-LCA. This development package consists of objects that can be grouped under "Interface Between ABAP and liveCache Objects".
It is part of development package /SAPAPO/OM_BASIS in software component BC-DB-LCA. This development package consists of objects that can be grouped under "Interface Between ABAP and liveCache Objects".
Message Nr ▲ | Message Text |
|---|---|
| 001 | A cycle exists in the network |
| 002 | Level not set correctly |
| 003 | An object needs to be updated |
| 004 | TimeSeries is not temporary |
| 009 | Unit object does not exist |
| 010 | Time bucket does not exist |
| 011 | Time buckets profile is too short |
| 012 | All dates must occur after the previous dates |
| 013 | Date outside of time period restriction |
| 014 | Time buckets profile is inconsistent |
| 015 | Date is before start date of time buckets profile |
| 016 | Date is after end date of time buckets profile |
| 017 | Time buckets profile is a read/write time buckets profile |
| 018 | Read/write time profile and storage buckets profile do not match |
| 019 | Time series is restricted by time period |
| 020 | Time series does not exist |
| 021 | Time buckets profile still being used |
| 022 | Time series has to be updated |
| 023 | Time bukctes profile and time series are different |
| 024 | Creation of time series has failed |
| 025 | Key figure does not exist in time series |
| 027 | Time series marked as temporary |
| 028 | Invalid time stamp in the time buckets profile relation |
| 029 | Access to non-persistent key figure |
| 030 | Decimal places unknown |
| 031 | SNP mode for key figure is unknown |
| 032 | Invalid pattern definition |
| 033 | Invalid pattern chain definition |
| 034 | Pattern object does not exist |
| 035 | Pattern chain object or assignment does not exist |
| 036 | Seasonal pattern is not referenced in the pattern chain |
| 037 | Pattern is still being used |
| 038 | Pattern chain is still being used |
| 039 | Seasonal pattern not in TsKf adaptation |
| 040 | Invalid time buckets profile reference |
| 041 | Date stamp inconsistent in TS/KF adaption |
| 042 | Time buckets profile has incorrect type |
| 043 | Pattern chain is empty |
| 050 | Relation does not exist |
| 052 | Invalid rule in relationship |
| 053 | Creation of relationship has failed |
| 056 | Error while adding a new level |
| 060 | Global object is not initialized |
| 068 | No propagation to aggregate fixing allowed in this context |
| 069 | Initialization update not allowed |
| 070 | Internal propagation error |
| 071 | Propagation category unknown |
| 072 | The value cannot be changed because fixings have been made (see longtext) |
| 073 | Unknown direction of propagation |
| 075 | All input time series to which you can distribute are fixed |
| 076 | Data inconsistency found |
| 077 | A possible cycle exists in propagation |
| 078 | Overflow during propagation calculation: Number too large |
| 079 | Propagation cycle when creating/deleting relations |
| 080 | Changed input value of SNP propagation |
| 081 | Fix propagation not possible |
| 082 | Change to non-persistent key figure value at detail level |
| 083 | Unknown mode for defixing of target in data copy |
| 084 | Unknown mode for transfer of fixings in data copy |
| 085 | Unknown set action mode |
| 086 | Initialization and propagation mode are not compatible |
| 089 | Unknown mode for handling fixings in data copy |
| 090 | Unknown disaggregation mode |
| 091 | Key figure type unknown |
| 092 | Unknown time-based disaggregation rule |
| 093 | Calculation type unknown |
| 094 | Propagation mode unknown |
| 095 | Key figure is still being used |
| 096 | Key figure still exists |
| 097 | Set mode unknown |
| 098 | Invalid precondition |
| 099 | Functionality not implemented |
| 100 | Changed object changed in a parallel transaction |
| 101 | Registered read-only object changed in parallel |
| 102 | Delta queue sensitivity changed during an active simulation |
| 109 | Invalid condition |
| 110 | Unknown disaggregation order |
| 121 | Invalid time period move mode |
| 122 | Invalid time period mode |
| 123 | Invalid key figure mode |
| 124 | Invalid query mode |
| 125 | Invalid storage mode |
| 126 | Invalid object type |
| 130 | Key figure inconsistency |
| 131 | Key figure description is not allowed |
| 132 | Key figure must be updated |
| 133 | Dependent key figure has errors |
| 134 | Key figure does not exist |
| 135 | Key figure array sorted incorrectly in time series |
| 136 | Doubled key figure entry |
| 137 | Key figure already exists |
| 138 | Out-relationships in key figure are corrupt |
| 139 | Key figure is read-only |
| 140 | Time series-specific description of key figure is inconsistent |
| 141 | Time series-specific key figure is not adapted to season |
| 142 | Time series-specific key figure is adapted to season |
| 143 | Keyfigure to be adapted does not exist in timeseries |
| 144 | Seasonal bucket incompletely represented in storage area |
| 150 | Array index is outside of the array area |
| 201 | Time shift does not exist (SNP) |
| 203 | Loading of SNP relation array was not successful (SNP) |
| 204 | Time shift not yet rolled over (SNP) |
| 205 | SNP relation does not exist (SNP) |
| 206 | SNP rule not valid (SNP) |
| 208 | Time shift too short (SNP) |
| 209 | Cycle found in delta graph (SNP) |
| 210 | Inconsistent constraint (SNP) |
| 211 | Node flow is inconsistent (SNP) |
| 213 | Flow parameter is zero (SNP push rule) |
| 214 | Time series is used as parameter time series (SNP) |
| 215 | Usage of branching and alternative rules at same time (SNP) |
| 216 | Value of constraint is smaller than set flow (SNP) |
| 217 | Set value of flow is negative (SNP) |
| 218 | Push-pull inconsistency (SNP) |
| 219 | Attempt to change fixed DP value (SNP) |
| 220 | Flow parameter is zero (SNP pull rule) |
| 221 | Time shift is inconsistent |
| 231 | Reference to reference time buckets profile is broken |
| 232 | Reference to time buckets profile in pattern is broken |
| 233 | Reference to pattern chain array is broken |
| 234 | OID in pattern chain array is broken |
| 235 | OIDs of time buckets profiles in pattern are broken |
| 236 | Incorrect assignment of profiles in pattern chain |
| 237 | Reference to pattern chain is broken |
| 238 | Reference to pattern profile in inserted object is broken |
| 239 | Reference to mapping table in pattern is broken |
| 240 | Reference to seasonality data in the TS/NF combination broken |
| 241 | Reference to data array for seasonality is broken |
| 251 | Reference to time buckets is broken |
| 252 | Time buckets profile: Reference to GRID_ARRAY is broken |
| 253 | Time buckets profile: Reference to DIFF_ARRAY is broken |
| 254 | Key figure: Key figure OID is broken |
| 255 | Current key figure description: Reference to time buckets profile broken |
| 256 | Current key figure description: Reference to proportional figure broken |
| 257 | Current key figure description: Reference to time-based split KF broken |
| 260 | Historical key figure description: Reference to profile broken |
| 261 | Historical key figure description: Ref. to proportional figure broken |
| 262 | Historica key figure description: Reference to time-based split KF broken |
| 265 | Time series: Time series OID is broken |
| 266 | Time series: Reference to key figure is broken |
| 267 | Time series: Reference to time series-independent KF description broken |
| 268 | Time series: Reference to time series-dependent KF description broken |
| 269 | Reference to data array is broken |
| 270 | Reference to "out" relation array is broken |
| 271 | "Out" relation is invalid |
| 272 | "Out" relation refers to itself |
| 273 | Type of "out" relation OID is incorrect (OmsVarOid or TsOid) |
| 274 | "In" relation missing for "out" relation |
| 275 | Time series: Reference to "in" relation array is broken |
| 276 | Time series: "In" relation is invalid |
| 277 | Time series: Reference to SNP "out" relation array is broken |
| 278 | Time series: Reference to SNP "in" relation array is broken |
| 279 | Time series: Reference to SNP parameter relation array is broken |
| 280 | SNP relation array: Reference to SNP relation object is broken |
| 281 | SNP relation object: Reference to pull array is broken |
| 282 | SNP relation object: Reference to push array is broken |
| 283 | SNP relation object: Reference to "in" time series is broken |
| 284 | SNP relation object: Reference to "out" time series is broken |
| 285 | SNP relation object: Reference to parameter time series is broken |
| 286 | Reference to intermediate TG/TS object broken |
| 287 | TG/TS Intermediate object: Reference to period pattern broken |
| 288 | TG/TS intermediate object: Reference to time series broken |
| 289 | Superfluous TG/TS intermediate object |
| 290 | Time series: Link to audit information is broken |
| 291 | Time series: Empty pattern chain not allowed |
| 292 | Invalid Tg OID in TgTS object |
| 293 | Invalid Ts OID in TgTS object |
| 294 | "In" relation refers to itself |
| 295 | Reference to "out" relation expected |
| 296 | Level of time series must be greater than 0 |
| 297 | Seasonality is not allowed |
| 298 | Inconsistent reference to "in" time series in "PersTsSNPRelation" |
| 299 | Inconsistent reference to "out" time series in "PersTsSNPRelation" |
| 301 | Negative value not permitted for this key figure |
| 302 | Register for temporary aggregates does not exist |
| 303 | Key figure vector not saved |
| 401 | Invalid pattern chain definition |
| 402 | Key figure must be updated |
| 403 | Time buckets profile of key figure does not exist |
| 404 | Time buckets profile of time shift does not exist |
| 405 | Time buckets profile of time series does not exist |
| 406 | Restriction on time buckets profile violated |
| 407 | Time buckets profile is inconsistent |
| 408 | Version of time buckets profile is inconsistent |
| 409 | Key figure type does not match calculation type |
| 410 | Key figure type does not match time-based disaggregation |
| 411 | Proportional key figure missing |
| 412 | Time-based proportional key figure is missing (for split mode = OTHER) |
| 413 | Time-based proportional key figure is missing (for split mode = INIOTHER) |
| 414 | Invalid pattern definition |
| 415 | Time shift does not exist |
| 416 | Start index of time series is invalid |
| 417 | End index of time series is invalid |
| 418 | Time shift is inconsistent |
| 419 | Time series is in update mode |
| 420 | Key figure version does not match time series |
| 421 | Detail entry is corrupt |
| 422 | Time series/key figure entry is corrupt |
| 423 | Time buckets profile of key figure is not profile of time series |
| 424 | Key figure array of time series is corrupt |
| 425 | Duplicate "in" relation |
| 426 | Duplicate "out" relation |
| 427 | Level of time series is incorrect |
| 428 | Incorrect level for pattern chain |
| 429 | Key figure array of the time series is not sorted |
| 430 | Duplicate key figure |
| 431 | "Out" relations of the key figure are corrupt |
| 432 | Persistent field of "out" relations does not exist |
| 433 | Detail key figure is not persistent |
| 434 | Dependent key figure is missing |
| 435 | Dependent key figure is not persistent |
| 436 | Relation between non-persistent and persistent key figure |
| 437 | Different key figures in neighboring aggregated time series |
| 438 | Propagated value is not correct |
| 439 | Fixed value is not correct |
| 440 | Non-initial flag is not correct |
| 441 | Fixing flag is not correct |
| 442 | "Any-Fixed" flag is not correct |
| 443 | "All-Fixed" flag is not correct |
| 444 | "Invalid" flag is not correct |
| 445 | Non-initial flag is set but is not supported by key figure |
| 446 | Zero value is fixed but is not supported by key figure |
| 447 | Negative value (not supported by key figure) |
| 504 | Invalid (zero) pointer transferred |
| 505 | Inconsistent object sizes |
| 507 | Invalid array transferred (size < 0 or size > 0 and pointer zero) |
| 508 | Invalid array index transferred (value < 0 or > array size - 1) |
| 527 | Invalid external key |
| 601 | Inconsistent description of key figures |
| 604 | Method only allowed in transactional simulation |
| 605 | Method not allowed in transactional simulation |
| 606 | Invalid unit, denominator is 0 |
| 607 | Clean method used with invalid mode |
| 608 | You cannot call clean method for the entire planning version |
| 609 | Consistency check method used with an invalid mode |
| 610 | Consistency check reports data inconsistencies |
| 611 | Factor too large (>1000%) when copying data |
| 612 | Invalid change mode |
| 613 | Invalid conversion |
| 614 | Source and target profiles do not match when copying |
| 615 | Copy period outside of source or target profile |
| 700 | Function not supported |
| 701 | Follow-up error |
| 755 | liveCache error |
| 801 | Inconsistent reference to parameter time series |
| 802 | Inconsistent time series OID in "PersTsSNPRelation" |