/SAPAPO/PINV - Messages for Stock Planning
The following messages are stored in message class /SAPAPO/PINV: Messages for Stock Planning.
It is part of development package /SAPAPO/PINV in software component SCM-APO-SPP. This development package consists of objects that can be grouped under "Inventory Planning".
It is part of development package /SAPAPO/PINV in software component SCM-APO-SPP. This development package consists of objects that can be grouped under "Inventory Planning".
Message Nr ▲ | Message Text |
|---|---|
| 000 | No or several fallback rules for model selection (not unique) |
| 001 | Error in rule &1 for selection of statistical model |
| 002 | Error when reading rule table for model selection |
| 003 | Probability &1 is not reliable as an effective service level |
| 004 | Non-specified error during rounding of purchase order quantities |
| 005 | The EOQ does not lie within given borders (&1, &2) |
| 006 | The economic order quantity cannot be zero (&1, &2) |
| 007 | No valid pricing scale could be created |
| 008 | No valid starting quantity could be specified |
| 009 | One or more input parameters are negative |
| 010 | &1 is not a valid model |
| 011 | Service profile &1 is not available |
| 012 | Data Could Not Be Read |
| 013 | No global fallback value defined in version &1 for SFT target values |
| 014 | No global fallback value defined in version &1 for EOQ/SFT model |
| 015 | No forecast data exists (&1, &2) &3 |
| 016 | Not enough forecast months available (&1 &2) &3 |
| 017 | Forecast strategy &1 not found in Cust. table for inv. plan. fcst type |
| 018 | Forecast profile could not be read for location product &1 &2 |
| 019 | Master data could not be read (&1, &2) |
| 020 | Planning type must either be constant or not constant - not %1 |
| 021 | The average no. of days per month not maintained in the service profile |
| 022 | No appropriate deployment indicator rule found (&1, &2) |
| 023 | The deployment indicator rule contained errors (rule ID &1) |
| 024 | Decision table &1 does not exist |
| 025 | Error when saving decision table &1 - Values not saved |
| 026 | No valid transportation lane exists between &1 and &2 at Product &3 |
| 027 | No main supplier found for location &1 (&2) |
| 028 | No historical demand exists for customer-facing location (&2) |
| 029 | Demand for customer-facing location &1 too short (6 months) (&2) |
| 030 | EOQ/SFT series could not be written |
| 031 | Replenishment indicator is not set (material &1, location &2) |
| 032 | Stocking Serv. is deciding stocking for product: &1, facing location &2 |
| 033 | Error when calculating the stability duration for the replenishiment ind. |
| 034 | Stocking serv. decided: product &1 to be stored at facing location &2 |
| 035 | Product &1 will still not be stored in location &2 in the future |
| 036 | Results could not be written to the master data |
| 037 | The product is already stored at location &1 |
| 038 | Calculate &1, &2 with constant. normal distribution w/o pricing scales |
| 039 | Calculate &1, &2 with constant normal distribution with pricing scales |
| 040 | Calculate &1, &2 with non-const. normal distribution w/o pricing scales |
| 041 | Calculate &1, &2 with non-const. normal distribution with pricing scales |
| 042 | Calculate &1, &2 with const. poisson distribution without pricing scales |
| 043 | Calculate &1, &2 with const. poisson distribution with pricing scales |
| 044 | Calculate &1, &2 with non-const. poisson distribution w/o pricing scales |
| 045 | Calculate &1, &2 with non. const. poisson distribution with pricing scale |
| 046 | Location product is not planning relevant |
| 047 | BOD could not be read in location &2, product &1 |
| 048 | Error during evaluation of BOD in location product &1, &2 |
| 049 | EOQ/SFT result is very different to the previous result |
| 050 | Error in profile &1 |
| 051 | Error when accessing replenishment indicator log |
| 052 | Calculate EOQ/SFT for location product &1, &2 |
| 053 | Parent location is not planning relevant &1 &2 |
| 054 | No stocking decision profile maintained for location &1 |
| 055 | No destocking profile maintained for location &1 |
| 056 | Destock. decis. serv. is deciding destocking for product: &1, location &2 |
| 057 | Destock. dec. service: product &1 no longer to be stored at location &2 |
| 058 | Product &1 will still be stored at location &2 (stockholding locked) |
| 059 | General error in BAdI for evaluation of decision profile |
| 060 | Order-type-dependent SFT: Historical demand does not exist for (&1, &2) |
| 061 | &1, &2: SFT deviates largely from previous SFT |
| 062 | Non-released EOQ/SFT data does not exist |
| 063 | EOQ/SFT of &1 &2 successfully set to active |
| 064 | Prod. &1: &2 is last stockholding location below entry location |
| 065 | Product &1 will still be stored at location &2 |
| 066 | Cost.func. &1: Fixed costs must equal lower limit times variable costs |
| 067 | Stockholding costs for location &1 product &2 cannot be zero |
| 068 | Decision to store new product &1 in location &2 (VCL) (BAdI) |
| 069 | Decision to store new product &1 in location &2 (BAdI) |
| 070 | Product &1 is new product and is not set to 'kept in stock' |
| 071 | Active BAdI '/SAPAPO/PHAS_EXT' defines storage location for new prod. &1 |
| 072 | No base unit of measure for &1 - No exclusion check of vol. and weight |
| 073 | &1: Conversion of UM not possible - no exclusion check of volume |
| 074 | &1: Conversion of UM not possible - no exclusion check of weight |
| 075 | &1 excluded from storage in &2 (&3) |
| 076 | &1 no longer excluded from storage in &2 |
| 077 | Prod. &1, loc. &2 - decision table &3, attribute &4 not contin. defined |
| 078 | Prod. &1 loc. &2(VCL) - Decision table &3, attribute &4 not cont. defined |
| 079 | Calculate product &1 location &2 with reorder-point-based planning (BAdI) |
| 080 | Profile ID for stocking and destocking &1 does not exist |
| 081 | Max. no. of iterations reached; values for EOQ/SS not optimal (&1, &2) |
| 082 | Decision, prod. &1 no longer to be stored in &2 (procure-to-order) |
| 083 | Decision no longer to store &1 in &2 (VCL) (procure-to-order) |
| 084 | Product &1 should be stored in location &2 but is locked manually |
| 085 | Prod. &1 should be stored in location &2 (VCL) but is locked manually |
| 086 | Inconsistent sub-BOD: child is stocked while parent is not (&1, &2, &3) |
| 087 | Prod. &1, location &2 - procurement lead time changed in BAdI |
| 088 | Product &1, loc. &2 (VCL) - procurement lead time changed in BAdI |
| 089 | Stocking decision was not made due to lack of demand in current period |
| 090 | Round EOQ to largest pack size (&1, &2) |
| 091 | Round EOQ to largest pack size (&1, &2-VCL) |
| 092 | Inconsistent BOD: Entry loc. is not PO and not planning-rel. (&1, &2, &3) |
| 093 | Version could not be converted |
| 094 | Inconsistent BOD: Child location is PO (&1, &2, &3) |
| 095 | No forecast data available (&1, &2, VCL) &3 |
| 096 | Sufficient forecast months not available (&1 &2, VCL) &3 |
| 097 | Data source for hist. data fut. BOD is not defined in service profile |
| 098 | Temporary EOQ/SFT results for &1 &2 have been released |
| 099 | Temporary EOQ/SFT results for &1 &2 (VCL) have been released |
| 100 | Cycle counting indicator set from &1 in &2 to &3 |
| 101 | New product (&1) and location (&2) excluded from execution |
| 102 | Procure-to-order &1 is not possible in &2 (stability period entry loc.) |
| 103 | Procure-to-order &1 is not poss. in &2 (VCL) (stability per. entry loc.) |
| 104 | Stocking Dec. for &1 at loc. &2 was enforced to ensure INC consistency |
| 105 | Non Stock. Dec. for &1 at loc. &2 was prevented to ensure INC consistency |
| 106 | INC consistency check was executed for &1 at location &2 |
| 107 | &1 Location Products have been stocked |
| 108 | &1 Location Products have been destocked |
| 109 | &1 Location Products have been skipped due to pending approval |
| 110 | Calculate &1, &2 (VCL) with const. normal distribution w/o price scaling |
| 111 | Calculate &1, &2(VCL) with const. normal distribution with price scaling |
| 112 | Calc. &1, &2 (VCL) with not-const. normal distribution w/o price scaling |
| 113 | Calc. &1, &2(VCL) with not-const. normal distribution with price scaling |
| 114 | Calculate &1, &2(VCL) with const. Poisson distribution w/o price scaling |
| 115 | Calc. &1, &2(VCL) with const. Poisson distribution with price scaling |
| 116 | Calculate &1, &2 (VCL) with non-constant Poisson distr. w/o price scales |
| 117 | Calculate &1, &2 (VCL) with non-constant Poisson distr. w. price scales |
| 120 | Use only aggregates when reading demand history from BW |
| 121 | General settings for Inventory Planning are not maintained |
| 122 | Matched Decision table: &1, X attribute ID: &2, Y attribute ID: &3 |
| 123 | Matched Entry: X-pos: &1, Y-pos: &2, Value: &3 |
| 124 | Demand Quantity: &1, Demand Entries: &2, Product:&3, Location:&4 |
| 125 | For &1 Location Products new EOQ / Safety Stock was calculated |
| 126 | &1 Location Products are not planning relevant |
| 132 | Stocking Serv. is deciding stocking for product: &1, regional location &2 |
| 134 | Stocking serv. decided: product &1 to be stored at regional location &2 |
| 135 | Children of locked parent are skipped. Product: &1, Location &2 |
| 139 | Planning lock created |
| 140 | Location product entry is missing |
| 141 | Enter start date and end date for planning lock |
| 142 | Start date must be earlier than end date |
| 143 | EOQ planning lock: Invalid reason code &1 |
| 144 | Entry not saved |
| 145 | Planning lock changed |
| 146 | Planning lock removed |
| 147 | Data manager location product not intitialized: & |
| 148 | Data manager location not initialized: & |
| 149 | Data manager product not intialized: & |
| 150 | Prod. &1, loc. &2 not changed due to stability period of entry loc. |
| 151 | Prod. &1, loc. &2 (VCL) not changed due to stab. period of entry loc. |
| 160 | Product location &1 is locked with reason code &2 between dates &3 and &4 |
| 171 | Average forecast: qty. &1, std. dev. &2, items &3, item qty. &4 |
| 200 | ABC code &1 determined for location &2 and product &3 |
| 201 | No ABC code maintained in service profile for location &1 |
| 231 | EOQ Planning Lock: No text for code &1 in language &2 found |
| 300 | Recommended storage qty &1 calculated for product &2 in location &3 |
| 301 | Forecast data for product &1 in location &2 not found |
| 302 | No recommended storage qty calculated for product &1 in location &2 |
| 400 | Selection by Planner is not available for BOD &1 Product &2 |
| 410 | Approval has been aborted |
| 411 | Prod. &1 parent loc. &2 is not stocked while its child loc. &3 is stocked |
| 412 | Policy lock exists for product &1, location &2 |
| 413 | Stability duration for product &1, location &2 is not over yet |
| 414 | Approval is pending for product &1, product will be skipped by processing |
| 420 | Approval has been succesfully done |
| 430 | No inventory planner maintained for product &1, location &2 |
| 431 | Less than 6 periods is not allowed for reading Historical Data |
| 432 | Number of periods for WF1 is more than the total number of periods |
| 433 | Weighting Factor 1 must be less than 100% |
| 440 | Display of approval records limited to &1 records |
| 441 | Approval records filter against Planner, &1 records removed |
| 500 | Error in IBP Integration (internal) |
| 501 | Error during determination of planning horizon |
| 502 | Product &1 is not assigned to a BoD |
| 503 | Production Start Date outside of planning horizon |
| 504 | Location &1 is not part of BoD &2 |
| 505 | Product/location &1/&2: Start of importing safety stock from IBP |
| 506 | Product/location &1/&2: Importing safety stock from IBP successful |
| 507 | Product/location &1/&2: No safety stock data from IBP |
| 508 | Product/location &1/&2&3: Manual approval for safety stock is required |
| 509 | Product/location &1/&2&3: Safety stock is released |