/SAPAPO/PPO_OPT - Message Class For PP Solver

The following messages are stored in message class /SAPAPO/PPO_OPT: Message Class For PP Solver.
It is part of development package /SAPAPO/PPO in software component SCM-APO-PPS-PPO. This development package consists of objects that can be grouped under "Production Planning Optimization".

Message Nr ▲	Message Text
000	The minimum shift duration should be 2 hours.
001	The total subdaily bucket duration cannot exceed 24 hours.
002	Material location not found.
003	Enter a value that does not exceed the horizon of the previous unit.
004	Select either the current date or a future date.
005	Enter the correct category group for the corresponding PP optimizer input
006	Priority 2, 3, 4 is not valid
007	Switching off the data consistency check is not recommended
008	To be discussed
009	Select an existing optimizer profile.
010	Category A Priority value should be less than that of Category B Priority
011	Enter a profile name.
012	Profile saved successfully.
013	Profile was successfully deleted.
014	This value does not match with the Global ATP Categories list.
015	'Interior Point Method' flag will be reset when selecting 'Automatic'.
016	The number of parallel processes must be greater than 0.
017	Enter a value greater than zero.
018	Enter a value greater than zero.
019	Simulation session was not created.
020	Optimizer: &1.
021	Maximum number of users for server module &1 has exceeded.
022	Error during download from application server
023	Error during upload to application server
024	Error setting up connection to application server
025	Step 1: Data read and model creation started at &1 on &2
026	Optimization-based planning completed at &1 on &2
027	Total number of products: &1
028	Total number of locations: &1
029	Total number of location products: &1
030	Total number of transportation lanes: &1
031	Total number of PDS: &1
032	Total number of demands: &1
033	Enter an existing location.
034	Unable to execute PP Optimizer
035	Conversion from &1 to &2 for product &3 is not possible
036	Enter an existing subdaily bucket definition ID
037	Enter an existing category group
038	Planning dates have been adjusted as per limits of Time Bucket Profile
039	Save the modification first
040	Enter an existing demand class
041	Enter an existing penalty group
042	Multiple setup keys are available in PDS &1 where &2 is in use.
043	Select an existing finiteness level
044	Unable to add a message to message log handle &1
045	PPM mapping is not available with GUID &1.
046	Enter a category group that has categories unique to this field.
047	Selected category group has demands and receipts. Maintain only receipts.
048	Selected category group has demands and receipts. Maintain only demands.
049	Select an existing Optimizer Profile
050	Select an existing Time Bucket Profile
051	Select an existing Category Profile
052	Select an existing heuristic
053	Cyclic dependencies between activities detected for PDS source &1
054	PDS &1 not found. The corresponding order will not be created.
055	Optimizer engine was not instantiated for application &1.
056	BAdI /SAPAPO/PPO_OPT_IO_ADJUST is active
057	Cannot split orders. Maximum order creation limit of &1 reached
058	Cannot split orders. Source &1 has a fixed consumption
059	Order not created for product &1 source &2 date &3 quantity &4
060	Order quantity increased from &1 to min. lot size &2
061	Error reading sources of supply for multiple products: Invalid date.
062	Error reading sources of supply for multiple products: Invalid quantity.
063	Error reading sources of supply for multiple products: Missing model.
064	Error reading sources of supply for multiple products: Wrong selection.
065	Error reading sources of supply for multiple products: Internal error.
066	Maintain a bucket offset value between 0 and 1
067	Enter a positive value for Discrete Constraints
068	Optimization run &1 locked by user &2
069	Parallel Process &1 &2
070	Enter location
071	Enter start date
072	Enter end date
073	Step 2: Model consistency checked and solution calculated at &1 on &2
074	Step 3: Order creation started at &1 on &2
075	Please maintain all required entries
076	Data saved successfully
077	Technical Error in LiveCache
078	Unable to locate the propagation range &1.
079	Statistics
080	Total number of planned orders: &1
081	Total number of procurement orders: &1
082	Total number of stock transfers: &1
083	You cannot run this transaction in the background
084	Unable to apply changes to database table &1
085	BAdI /SAPAPO/PPO_ORDER_MOD for Planned Order is active
086	BAdI /SAPAPO/PPO_TIME_BUCKET_ADJUST is active
087	Enter time buckets in a continuous format
088	Planning dates have been changed in the BAdI implementation
089	Conversion from &1 to &2 for product &3 for trans. lane is not possible
090	Error during order deletion: &1
091	Error during order deletion: Invisibility group cannot be created.
092	No Orders Deleted
093	Error during order deletion: Reversal of temporary deletion failed.
094	Error reading Transportation Lanes : Internal Error
095	Internal Error : Optimizer Input Data Mapping
096	BAdI /SAPAPO/PPO_ORDER_MOD for Stock Transfer Order is active
097	Select an existing Parallel Profile
098	An error occurred while trying to apply changes to the orders.
099	BAdI /SAPAPO/PPO_PEGGING is active
100	Input parameters
101	Customizing settings
102	Error in display of application log.
103	Order not created for product &1 using source &2 on &3 of quantity &4
104	Periodicity &1 is invalid for periods &2
105	Periodicity & is invalid
106	Error when reading factory calender &1 for date &2
107	Enter an existing fiscal year variant
108	Date entry is incorrect
109	No time bucket profiles found
110	Error reading fiscal year variant &1 for date
111	Time bucket profile & does not exist
112	Cannot fetch downtime for resource
113	Interval deleted and penalties of previous interval imposed for the same
114	Capacity for resource could not be fetched
115	Select an existing material
116	Select an existing location
117	Enter a Start Date
118	The Product &1 at Plant &2 is not relevant for Advanced Planning
119	&1 rows selected. Please select a maximum of 10000 rows and try again.
120	&1 Location Products were locked in another session, hence were skipped.
121	Error in Period calculation
122	Duplicate entries are not allowed
123	Please select a row
124	Select a single row for this action.
125	Error in writing Trace File
126	Error in Livecache read of Orders. Check RRP Log.
127	Trace File not found
128	End Date should not be less than the Start Date
129	Product &1 not maintained in Location &2
130	Total number of substitution orders: &1
131	Enter a selected Product
132	Enter a selected Location
133	Enter a Date within the Selected Date Range
134	This is a duplicate entry. Please check the values and retry.
135	This is a duplicate entry. Please check the values and retry.
136	Enter the key values for Product/Location/Date_From
137	Database has been Updated
138	Enter a date in the future but within the End date of the row selected
139	Select the Entry to be deleted
140	Select a Row to split
141	Enter the Products to be selected
142	Few materials/locations were excluded due to Authorization
143	Error when calculating the scrap quantity.
144	Start Date of the planning period cannot be less than &1.
145	No Orders were deleted
146	Start Date cannot be in the past
147	Stock Levels in the Past cannot be Editted
148	Stock Levels in the Past cannot be Deleted
149	Records exist in DB prior to this.Increase the date range and try again
150	&1 Location Products were locked in another session, hence were skipped
151	Choose a date within the selected interval
152	Update the date range in the selection screen and try again
153	Please rectify errors first
154	This entry cannot be deleted as Previous entry lies in tha past
155	Non-Delivery penalty has been adjusted
156	Maximum Delay has been adjusted
157	Problem in fixed pegging arc creation after BAdI call
158	Problem in fixed pegging BAdI call with reading orders
159	Total number of deleted orders: &1
160	&1 and &2 is an invalid material location combination
161	There is no authorization for &1 products hence they were skipped
162	&1 products were skipped as they weren't assigned to the planning version
163	All materials were excluded from optimizer run. Please refer to RRPLOG
164	Maintain atleast Product Number or Production Planner
165	Enter planning version
166	You are not authorized to execute the RFC Function module
167	Optimizer has run with a parallel profile
168	No of parallel processes created for optimizer input: &1
169	No of parallel processes created for optimizer output: &1
170	Please check /SAPAPO/RRPLOG1 transaction
171	Enter a selected product which is active for planning
172	Error when determining Customizing data. App may be inactive.
173	No DDIC information exists for specified data object
174	Enter the key values for Product/Location/Demand Class
175	Correct the Errors and try again
176	Inhouse Production(AI) or Ext Proc/Stk Trnsf(AG) ATP Category is missing
177	Enter a valid Time bucket Profile
178	Item &1 of supersession chain &2 excluded for the optimization run
179	You have maintained same valid from date for 2 or more chain items
180	There was a problem fetching planning object for material and location
181	Select an existing DS Optimizer Profile
182	Few materials/locations were excluded due to Propagation Area check
183	Enter an offset in the Backward direction
184	Specified offset time is too big; it is restricted to 5 years
185	Error while reading Resources for DS Optimizer
186	Error in Reading DS Optimizer Profiles
187	Error in substracting Timestamps
188	Error while adding message to DS msg log
189	DS Optimizer is not executed as no valid Resources were passed from PPO
190	& location(s) have been skipped from selection.
191	Error while fetching Supersession Chain, PP Optimizer run terminated
192	Error in adding Timestamps
194	Selected Products/Locations are not relevant for planning
195	Details of Production Planning logs created for parallel processes
196	Parallel Process &1 Started
197	Parallel Process &1 Ended