/SAPAPO/SNPOPT - Optimizer Messages

The following messages are stored in message class /SAPAPO/SNPOPT: Optimizer Messages.
It is part of development package /SAPAPO/MDRP in software component SCM-APO-SNP. This development package consists of objects that can be grouped under "SNP development".

Message Nr ▲	Message Text
000	&1 messages with number &2 have been suppressed
001	Production process model/PDS &1: Invalid rounding limit
002	Transportation lane &1: Invalid rounding limit
003	&1 messages with number &2 have been suppressed
007	No production process models/PDS are defined
010	Invalid Priority Internal Limits
011	No transportation lanes are defined
017	There is no demand defined
020	Product &1: Only valid outside of the planning horizon
021	Product &1: Only valid outside of the planning horizon
024	Resource &1: Capacity can be increased free of charge
025	Location &1, product &2: Fixed orders exist
028	Product &1: Not assigned to a location
029	Location &1: No products assigned
031	Safety stock violation does not incur penalty costs
035	Product &2: Invalid, but has a positive minimum stock level
039	Product &1 is not consuming any storage capacity
041	Product &1: No costs are incurred when surplus is destroyed
043	Resource &1: Overload not taken into account
044	Resource &1: Not available or has no available capacity
045	Resource &1: increase capacity overload is not taken into account
046	Resource &1: No available capacity in time frame &2 to &3
049	Transportation resource &1: The capacity is not valid
051	Transportation lane &1: Shipment duration rounded to 0
052	Transportation lane &1: No products assigned
053	Product &1 at location &2: Cannot be shipped over any transportation lane
057	Product &2: Maximum number of lots is 0
059	Transportation lane &1: Invalid limits for the number of lots
061	Product &2: Transportation lot size is 0
063	Product &1 does not consume any transportion capacity
066	Product &1: Opening stock not possible
067	Product &1: A fixed stock change is not possible
068	Transportation resource &1: Piecewise linear cost function not possible
069	Production process model/PDS &1: Invalid limits for lot sizes
073	Production process model/PDS &1: Cannot be executed
075	Production process model/PDS &1: Cannot be executed
077	Production process model/PDS &1: Inconsistent resource usage
079	Location &1: Invalid limits for external procurement
081	Production process model/PDS &1: Invalid limits for production quantities
090	Product &2: Costs for delayed deliveries are missing
092	Product &2: Costs for not delivering are missing
098	Location &1, product &2: Demand cannot be fulfilled
099	Calling &1 for not supported application &2, only supporting &3
100	Product &2: Invalid opening stock
109	Transportable product &1: Not assigned to location
111	Production process model/PDS &1: Cannot be executed
112	Resource &1: Discrete increase not considered
113	Transportation lane &1, product &2: Minimum transportn lot not considered
114	Transportation lane &1: Discrete number of vehicles not considered
115	Production process model/PDS &1: Discrete lot size not considered
116	Production process model/PDS &1: Minimum production lot not considered
117	Storage resource &1: Not available or has no available capacity
120	Transportable product &1: Discrete lot size not considered
121	Transportation lane &1, product &2: Cost function not considered
122	Transportation lane &1: Discreteness not considered
123	Transportation lane &1: Discreteness and cost function not recommended
124	Transportation lane &1: Piecewise linear cost function not considered
125	Transportation resource &1: Discrete for continuous transportation lane
126	Demand for product &2 at location &1 not allowed
129	Product &1 at location &2 does not consume any handling-in capacity
130	Product &1 at location &2 does not consume any handling-out capacity
131	Product &1 at location &2: Procurement not allowed
132	Production process model/PDS &1: Execution not allowed
133	Product &1 at transportation lane &2: Stock transfer not allowed
134	Product &1 at location &2: Stock not allowed
135	Product &1 at location &2: Demand cannot be fulfilled
136	Location &1, product &2: Safety stock is inconsistent
137	Product &1 at location &2: Inconsistent penalty for not delivering
138	Product &1 at location &2: Inconsistent delay penalty
139	Product &1 at location &2: Inconsistent opportunity costs
140	Product &1: Shelf life not uniform
141	Product &1: Costs for production exceed costs for not delivering
142	Product &1:Costs for external procurement exceed costs for not delivering
143	Product &1: Costs for storage exceed costs for not delivering
144	Product &1: Costs for transport exceed costs for not delivering
145	Transportation lane &1 cannot be used for product &2
146	Production process model/PDS &1: Cannot be executed
147	Product &1 at location &2: Are costs for external procurement ok?
148	Product &1 at transportation lane &2: Are transportation costs ok?
149	Production process model/PDS &1 at location &2: Are costs ok?
150	Resource &1: Are costs for capacity increase ok?
151	Product &1 at location &2: External procurement cost function incomplete
152	Product &1 at transportation lane &2: Incomplete transportn cost function
153	Production process model/PDS &1 at location &2: Incomplete cost function
154	Resource &1: incomplete cost function for capacity increase
155	Product &2 in location &1: Safety stock contradicts maximum stock
156	Product &2 at location &1: Unneccessary material destruction
157	PPM/PDS &1 is using more than 1 resource for lot size planning
158	Production process model/PDS &1: Fixed resource consumption not allowed
159	Production process model/PDS &1: Cannot be executed
160	PPM/PDS &3 cannot be run in lot size planning horizon
161	No fixed consumption of resource &2 by production process model/PDS &1
162	Production process model/PDS &1: Cost function is missing
163	Product &1 at location &2: Dynamic safety stock > shelf life
164	Product &2 at location &3: COM error &1
167	Product &1 at location &2: Safety stock violation costs
168	Product &1 at location &2: Safety stock for a non-valid product
169	Production process model/PDS &1: Execution ends outside of validity per.
171	Product &1 at location &2: External procurement of larger qty costs less
172	Production process model/PDS &1 at loc. &2: Larger no. lots costs less
173	Transportation lane &1: Larger number of means of transport costs less
174	Product &1 at location &2: Shelf life costs are lower than storage costs
179	Safety stock costs for product &1 at location &2 are too low
180	Switching off the data consistency check is not recommended
182	Product &1 at location &2 has a negative days' supply
184	Costs for safety days' supply of product &1 at location &2 are increasing
185	Shelf life violation costs of product &1 at location &2 are decreasing
186	Location &1, product &2: Stock balance violation
189	Safety stock costs for product &1 at location &2 are too low
190	Product &1 at transportation lane &2: PPM/PDS does not exist
194	PPM/PDS &4: Lot size ignored
199	Product &1 at location &2: Unsuitable storage costs
200	Product &1 at location &2: no costs for violation of maximum stock level
201	The error that occurred will be ignored
202	The error that occurred causes optimization to terminate
203	Problem simplified by removing discrete constraints
204	Problem simplified by removing fixed requirements
205	Runtime increased by &1 seconds
206	Production process model/PDS &1: Discrete constraints violated
207	Product &1 at transportation lane &2: Discrete constraints violated
211	Priority &1 for product &2 is ignored
214	Location &1, prod. &2: rcpt lower bound is greater than rcpt upper bound
215	Location &1, product &2: negative receipt upper or lower bound
216	Location &1, product &2: Costs for violating receipt bound are negative
217	Location &1, product &2: receipt upper and lower bounds are redundant
218	Location &1, product &2: receipt upper or lower bound is redundant
220	Quota arrangement &1 contains redundant items
221	Quota arrangement &1 contains redundant items
222	Quota arrangement &1 is redundant
223	Quota arrangement &1 is redundant
224	Quota arrangement &1 contains redundant items
225	Quota arrangement &1 contains items with the same product flows
226	Setup matrix &1 is empty
228	No setup matrix assigned to resource &1
229	Setup matrix &1: Triangle inequality for setup costs not fulfiled.
230	PPM/PDS &1 uses two resources for sequence-dependent lot-size planning
231	PPM/PDS &1 without setup key uses resources with setup matrixes
232	Setup key for PPM/PDS &1 is not maintained in setup matrix &4
233	All demand is frozen
234	Product &2 cannot be substituted by product &3
235	Product decomposition with cross-period lot-size planning is used
236	Duration of PPM/PDS &1 is too long
237	Prod. &1 at loc. &2 is referenced by the 2 supersession chains &3 and &4
238	Product &1 at location &2 is referenced by the two FFF classes &3 and &4
239	Minimum capacity defined for a non-production resource &1 in bucket &2
250	COM error &1 when deleting planned order
251	COM error &1 when deleting stock transfer
273	Not enough memory
274	Runtime limit set using dual solution method
275	Optimum solution found
276	LP is unbounded
277	Run time limit reached: Feasible solution found
278	Run time limit reached: No solution found
279	Optimizer input data: Reference not valid
280	Error during download from application server
281	Error during upload to application server
282	Error setting up connection to application server
285	Infeasible problem
286	Fixed partial problem cannot be solved
287	Fixed partial problem cannot be solved
293	A duplicate key exists in table &3
294	Table &3: Referential integrity violated
295	A duplicate key exists in table &3
296	Table &3: Referential integrity violated
297	Incorrect GUID in table &3
298	A duplicate key exists in table &3
299	Table &3: Referential integrity violated
300	Optimizer: Input data inconsistent
301	Writing data again; attempt number: &1
400	Penalty costs for non-delivery too low
401	Product &1 in location &2: Non-delivery penalty costs too low
402	Penalty costs for safety stock shortfall are too low
403	Product &1 in location &2: Safety stock penalty costs too low
404	Shortfall quantities due to suboptimal solution
405	Safety stock shortfall due to suboptimal solution
406	No explanations necessary
407	Capacity analysis: Priority &1
408	Upper Limit Analysis: Priority &1
409	Product availability analysis: Priority &1
410	Lead time analysis: Priority &1
411	Cost analysis: Priority &1
412	Suboptimality Analysis: Priority &1
413	Missing quantities could not be fully explained
414	Missing quantites could be fully explained
415	Upper Limit Analysis
416	Capacity Analysis
417	Product Availability Analysis
418	Lead Time Analysis
419	Shortfall of safety stock not fully explainable
420	Shortfall of safety stock fully explainable
421	CPU time limit reached
422	No explanation found
423	Penalty costs analysis
424	Missing Quantity After Limit Analysis: &1%
425	Safety Stock Shortfall After Limit Analysis: &1%
426	Missing Quantity After Capacity Analysis: &1%
427	Safety Stock Shortfall After Capacity Analysis: &1%
428	Missing Quantity After Product Availability Analysis: &1%
429	Safety Stock Shortfall After Product Availability Analysis: &1%
430	Missing Quantity After Lead Time Analysis (Horizons): &1%
431	Safety Stock Shortfall After Lead Time Analysis (Horizons): &1%
432	Missing Quantity After Lead Time Analysis (Past): &1%
433	Safety Stock Shortfall After Lead Time Analysis (Past): &1%
434	Missing Quantity After Cost Analysis: &1%
435	Safety Stock Shortfall After Cost Analysis: &1%
444	Overflow caused by a too large amount of results data
445	Overflow caused by a too large amount of results data
450	Overload at storage resource &1
451	Surplus of product &1 at location &2
452	Stock of product &1 at location &2 above soft upper bound
600	Optimizer: Internal error occurred
777	Available memory on optimization server is low (available: &1%)
801	Starting optimization run
802	Loading parameters
803	Loading planning data
804	Checking data consistency
805	Starting time decomposition
806	Starting product decomposition
807	Extracting part of problem
808	Starting primal simplex algorithm
809	Starting dual simplex algorithm
810	Starting interior point method
811	Writing results
812	Completing optimization run
813	Starting partial search
814	Starting full search
815	Select optimization parameters
816	Solution found
817	Improving solution
818	Find start solution
819	End of calculation
820	Starting resource decomposition
821	Starting Automatic Cost Generation
822	Starting preallocation for product decomposition
823	Finished preallocation for product decomposition
824	Starting next loop of product decomposition
825	Finished product decomposition
826	Finished time decomposition
827	Finished resource decomposition
828	Starting priority decomposition
829	Finished priority decomposition