/SCMTMS/PLN_VSR_OL - Messages from VSR Outer Layer

The following messages are stored in message class /SCMTMS/PLN_VSR_OL: Messages from VSR Outer Layer.
 It is part of development package /SCMTMS/PLN_ENGINES_OL in software component TM-PLN. This development package consists of objects that can be grouped under "Planning: Engines - Outer Layer".
Message Nr ▲
Message Text
001&1 &2 is locked by user &3
002&1 was changed in a parallel session; save your data and refresh
003Stop at &1 was changed in a parallel session; save your data and refresh
004&1 &2 was changed in a parallel session; save your data and refresh
005You can only create transp. prop. for one FU or FUs from one pred. doc.
010Authority check failed for &1 &2
011Context: No authorization for &1 &2
012No &1 authorization for &2 &3
013Alert could not be created for category &1
014You have to select at least one freight unit for optimization
015No transportation lanes found for your selection
016Select at least one vehicle or schedule for optimization
017Condition calculation for (un)loading duration failed, default is used
018No planning-relevant freight unit was selected
019Strategy &1 is not a VSR strategy
020Strategy &1 is not a VSS strategy
021Strategy &1 cannot be used to select schedules or routes
022Strategy &1 can only be used for schedule selection
030Compartment &1 is overloaded (total &2 exceeds available &3 &4)
031Resource/equip. type &1 is overloaded (total &2 exceeds available &3 &4)
032MTr combination &1 is overloaded (total &2 exceeds available &3 &4)
033Booking &1 is overloaded (total &2 exceeds available &3 &4)
034No direct load allowed for MTr &1
035One order condition violated for compartment type &1 seq &2 on MTr &3
036No. of parallel freight ord.(&1) exceeds max. limit (&2) for multires. &3
037Alert for multiresource violation could not be created for &1 &2
038Package &1 is overloaded (total &2 exceeds available &3 &4)
039Document has an overload situation; check utilization
040All checks executed successfully
041Document &1 is inconsistent
042Consistency check failed
043&1 is overloaded; utilization is &2%
044Combined capacity of the document has a utilization of &1
050&1 alternative transportation proposals found
061&1 excluded because not relevant for automatic planning
062&1 excluded because document is planned on an excluded capacity document
063Stage &2 of document &1 excluded because it is blocked for planning
064&1 excluded because the document has status &2
065&1 excluded because assigned resource/equip. type is blocked for planning
066Resource &1 excluded because it is blocked for planning
067&1 excluded because optimizer can't consider the stage sequence type
068&1 excluded because doc. has at least one stop with an undefined location
069&1 excluded because schedule data status is "Data is Not Up-to-Date"
070&1 excluded because capacity document is before planning horizon
071&1 excluded; there is at least one item with fixed req. doc. assignment
072Equip. type &1 (group &2) excluded because it is blocked for planning
073&1 excluded because items are locally distributed into compartments
074&1 filtered because trailer unit is created via freight unit building
100==> Shortcut related messages
101No freight units have been built
200==> Interactive planning related messages
201Planning not possible, &1 is already planned
202No consolidation allowed for &1
203&1 cannot be assigned to res. &2; it does not have capacity
204&1 can only be coupled to veh. res/veh. type; &2 is passive veh. res/type
205&1 is already coupled to a vehicle resource or vehicle type
206&1 can only be coupled to passive veh. res.; &2 is not a pass. veh. res.
207Assignment of &1 to &2 not possible
208For &1 with MTr &2 no appropriate transporation lane exists
209Planning not possible; &1 is blocked
210&1 may not be loaded directly
211&1 is fixed
212&1 cannot be coupled to passive vehicle resource or vehicle type &2
213&1 cannot be coupled to &2
214For schedule &1 no departure times exist
215Planning for &1 not possible
216Missing pick-up or delivery window for &1
217Missing pick-up/delivery window for &1; use planning horizon as default
218Depot location of vehicle &1 is not considered within freight order &2
219Pick-up window of &1 violates appointment window of &2
220Delivery window of &1 violates appointment window of &2
221&1 assigned to &2
222Location &1 is not yet part of &2
223No transshipment location of &1 is part of &2
224&1 extended for location &2
225Means of transport of &1 changed
226Container &1 added to &2
227Vehicle &1 added to &2
228&1 created for vehicle &2
229&1 created
230&1 removed from &2
231Vehicle resource &1 has MTr with 'Schedule' checkbox selected
232&1 is not planned and cannot be unplanned
233Stop &1 of &2 cannot be assigned to stop &3 of &4
234No common transshipment location for source locations found
235No common transshipment location for destination locations found
236&1 is already assigned to container &2
237&1 cannot be used for manual planning
238No usable departure time found
239Planning not possible; check selected objects
240Planning not possible; multiple FOs with active vehicle passed
241&1 removed from planning
242&1 coupled to &2 at location &3
243Planning not possible; &1 is canceled
244&1 cannot be coupled to &2
245&1 uncoupled from &2 at location &3
246Planning not possible; stops are coupled
247Stop cannot be removed because of coupling to other freight orders
248&1 uncoupled from &2
249Proposed transportation mode of FU &1 does not match &2
250Vessel &3 of FU &1 does not match vessel of &2
251Voyage &3 of FU &1 does not match voyage of &2
252Flight code &3 of FU &1 does not match flight code of &2
253Proposed carrier &3 of FU &1 does not match carrier &4 of &2
254Proposed transp. mode of FU &1 doesn't match resource/equipment type &2
255Proposed vessel &3 from FU &1 copied to &2
256Proposed flight code &3 from FU &1 copied to &2
257Proposed voyage &3 from FU &1 copied to &2
258Proposed means of transport of FU &1 does not match &2
259Proposed means of transport of FU &1 doesn't match res./equip. type &2
260Transportation mode category of FU &1 does not match &2
261Cannot create freight order for &1 due to missing proposals
262Cannot assign requirements of &1 to elements of category &2
263Assign requirements of &1 to elements of category &2
264Means of transport changed from &1 to &2
265Multiple stages of &1 assigned to same resource or equipment type &2
266Multiple stages of &1 assigned to same &2
267&1 has shipping type &2 and must not be planned separately
268Enter a valid combination of shipping types
269FU stages within container have different consignees
270Consolidated on-carriage for &1 has different destination locations
271Cannot create freight booking for &1 due to missing proposals
272Container usage for consolidated on-carriage is possible only for FOs
273No freight units consolidated within container
274Cannot add container &1 to &2
275Different freight agreement ID in forwarding order and freight booking
276Cannot plan multiple stages of freight document &1
277Cannot plan uncontrolled freight units with controlled freight units
278Default freight document type is not available; cannot plan stages
279Cannot change first and last location within location sequence
280Different carriers maintained for the selected freight unit stages
281Only one pickup location is permitted when you create a freight booking
282Only one delivery location is permitted when you create a freight booking
283Service level at POL of type &1 does not match the given stages
284Service level at POD of type &1 does not match the given stages
285Only subsequent stages of &1 can be planned together
286Assignment is not possible; location &1 is not part of freight booking &2
287You cannot assign stages to booking &1; pick-up locations do not match
288You cannot assign stages to booking &1; ports of loading do not match
289You cannot assign stages to booking &1; ports of discharge do not match
290You cannot assign stages to booking &1; delivery locations do not match
291You can only use schedules that have gateways
292Select a freight order with a passive vehicle
293Select a freight order with a vehicle
294Multiple locations found for UN/LOCODE &1 within order &2
295Location for UN/LOCODE &1 not found in order &2
296Complete the location data for freight unit stage &1
297Planning failed; no data changed
298Freight order &1 created
299Freight order &1 created for vehicle &2
300Freight booking &1 created
301Location &1 is not part of schedule &2
302Stage &1 cannot be planned with schedule &2; locations are different
303Assignment not possible
304Error while creating freight booking for schedule &1
305Error while creating freight order for schedule &1
306&1 schedule departures selected
307&1 freight documents created
308Cannot use location &1 of booking &2; service level is &3
309Freight order &1 is already assigned to an active vehicle
310Trailer &1 is already assigned to a passive vehicle
311Planning not possible; stages already planned
312Error while creating freight order
313Coupling not possible; trailer already coupled for these stages
314Transportation unit &1 created for vehicle &2
315Error while creating transportation unit
316Vehicle change not possible; remove original vehicle first
317Transportation unit &1 created
318Error while creating transportation unit
319Transportation unit &1 is already assigned to freigth order &2
320Error while converting penalty costs from condition &1; default is used
321Only uncoupling intermediate stages is not possible
322Document type &1 can not be used for planning operations
323Freight order for pick-up cannot be used because of service level
324Freight order for delivery cannot be used because of service level
325Freight order cannot be created; enter a location
326Planning not possible; status &1 is active for &2
327Res./equip. type can't be assigned; freight order is linked to a schedule
328Location &1 cannot be deleted; coupling activities at location &1
329Location &1 cannot be deleted; uncoupling activities at location &1
330Sequence cannot be changed; loading location after unloading location
331Contract basis &1 not found
332Driver &1 added to freight order &2
333Coupling of trailer unit &1 at location &2 is not allowed
334Coupling of trailer unit &1 at location &2 not allowed; no loading act.
335Re-coupling of trailer unit &1 not allowed at location &2; not swapped
336Transportation mode categories of vehicle &1 and document &2 do not match
337Transp. mode categories of requirement and capacity document don't match
338Trailer unit &1 cannot be assigned; freight order is linked to a schedule
339Railcar unit &1 cannot be assigned; freight order is linked to a schedule
340Trailer unit &1 cannot be assigned; it is linked to a schedule
341Railcar unit &1 cannot be assigned; it is linked to a schedule
342Assignment not possible; freight order &1 is linked to a schedule
343Assignment not possible; trailer unit &1 is linked to a schedule
344Assignment not possible; railcar unit &1 is linked to a schedule
345Enter a valid means-of-transport combination for freight order &1
346Freight booking cannot be created; stage type for stage &1 missing
347Assignment not possible; cannot add further pick-up/delivery locations
348Assignment of &1 to &2 not possible; no common pick-up/delivery locations
350&1 loaded into &2 at location &3
351&1 unloaded from &2 at location &3
352&1 cannot be assgined to &2
353Proposed carrier &3 of container unit &1 does not match carrier &4 of &2
354Proposed means of transport of container unit &1 does not match &2
355Vessel &3 of container unit &1 does not match vessel of &2
356Voyage &3 of container unit &1 does not match voyage of &2
357Flight code &3 of container unit &1 does not match flight code of &2
358Container unit &1 cannot be assgigned to trailer unit &2
359Container unit &1 cannot be assgigned to railcar unit &2
360Cannot plan uncontrolled container units with controlled container units
361&1 unassigned from &2
362Stage cannot be unassigned; pre-/succeeding stages are still assigned
363Stage cannot be split because of existing assignments
364Transportation mode categories of schedule &1 and doc. &2 inconsistent
365Extension of freight order &1 not possible; it is linked to a schedule
366Cannot insert new locations; railcar unit &1 already assigned to FO
367Container unit &1 created
368Error while creating container unit
369Enter freight agreement ID in forwarding order &1 of freight unit &2
370Enter freight agreement ID in forwarding order &1 of container unit &2
371Cannot assign container to container unit; equipment type inconsistent
372Means of transport combination in FO &1 not defined in Customizing
373FO not planned; choose an FO with an FO type that is linear and direct
374Assignment not possible; cannot add further requirements to document &1
375Location cannot be added to &1 because location sequence is fixed
376Locaction cannot be deleted from document &1; location sequence fixed
377Cannot remove location &1 from doc. &2; FU or TU still assigned
378Freight doc. cannot be created; departure of schedule &1 is not valid
379Planning not possible; documents cannot be assigned to each other
380Stop cannot be moved because further documents are assigned
381Planning not possible; invalid data passed to planning operation
382Location seq. synchronization of doc. &1 not possible; stops are assigned
383Location cannot be deleted because further documents are assigned
384Cannot assign requirement to document &1; document is fixed
385Locaction cannot be moved within document &1; location sequence is fixed
386Driver assignment per stage not possible for road freight order &1
387Assignment not possible; no default truck defined for driver &1
388Cannot create doc.; document type &1 is not relevant for driver planning
389Assignment not possible; cannot change dest. location of preceding stage
390Assignment not possible; cannot change src. location of succeeding stage
391Assignment not possible; cannot change source location of first stage
392Assignment not possible; cannot change dest. location of last stage
393Assignment not possible; other req. documents already assigned to doc. &1
394Not all objects could be planned; check planning result
395Planning not possible; stages of doc. &1 have different carriers
396Resource &1 cannot be used; it is blocked
397Default truck &1 cannot be used; it is blocked
398Freight order &1 created for means of transport &2
399Trailer unit &1 created
400Railcar unit &1 created
401Planning not possible; &1 is not ready for planning
402Cannot change assignments of document &1; document assignments are fixed
403Fixed assignment of document &1 overruled by manual planning settings
404Fixing of document &1 overruled by manual planning settings
405Assignment not possible; document &1 is already assigned to a schedule
406Document &1 cannot be planned with schedule &2; locations are different
407Cannot assign schedule &1 to doc. &2; document is already in use
408Cannot assign schedule &1 to doc. &2; resource &3 is already assigned
409Planning not possible; resource &1 does not have capacity
410Planning not possible; document &1 is schedule-based
411Cannot assign schedule &1 to doc. &2; different transportation modes
412Cannot assign resource &1 to document &2; document category mismatch
413Assignment not possible; driver &1 is blocked
414Number of freight orders created: &1
415Number of freight bookings created:&1
416Number of trailer units created: &1
417Number of railcar units created: &1
418Number of container units created: &1
419Can't create document for resource/equip. type; doc. category mismatch
420Cannot change document &1. Location sequence is fixed
421Number of requirement documents assigned: &1
422Number of requirement documents unassigned: &1
423Number of requirement documents assigned to new capacity item: &1
424Requirement doc. &1 assigned to new capacity item &2
425On-carriage of &1 must not be planned separately; buyer's consolidation
426Cannot assign &1 to &2; consolidation parameter mismatch
427Cannot assign driver; document &1 is not relevant for driver planning
428Cannot assign driver team to document &1; only single driver possible
429Keep the service level at src loc. and dest loc. identical
430Number of driver assignments: &1
431Number of driver unassignments: &1
432Driver &1 assigned to document &2
433Driver &1 unassigned from document &2
434You can only plan all stages of document &1 together
435Cannot assign stage &1; doc. &2 can't be used for cust. self-delivery
436Cannot assign stage &1; document &2 can't be used for customer pick-up
437Delivery location added for new delivery attempt of requirement doc. &1
438Requirement &1 returned to loading loc.; new delivery attempt prepared
439New delivery attempt prepared for req. &1 to be planned using other doc.
440Requirement document assigned to item & instead
441Planning not possible; stage &1 is not planning-relevant
442Package unit &1 created
443Number of package units created: &1
444Cannot remove location &1 from doc. &2; sub-stops still assigned
445Planning not possible; VSR optimizer can't consider container unit &1
446Planning not possible; VSR optimizer can't consider package unit &1
447Planning not possible; selected stages of CU &1 are unconnected
448Planning not possible; selected stages of PU &1 are unconnected
449Cannot remove stop from document &1; stop is used by cargo items
450Requirement document &1 assigned to capacity item &2
451Freight document &1 consolidated into freight document &2
452TU &1 consolidated into TU &2
453&1 freight documents consolidated into freight document &2
454&1 TUs consolidated into TU &2
455Cannot move stop &1; stop is a distribution stop
456Cannot move stop &1; stop is a collection stop
457Cannot move stop &1; conversion into a distribution stop is not possible
458Cannot move stop &1; conversion into a collection stop is not possible
459Cannot change assignments of capacity item &1; assignments are fixed
460Fixed assignment of cap. item &1 overruled by manual planning settings
461Cannot change assignments of document &1; load plan is finalized
462Cannot change assignments of document &1; execution already started
463Package unit &1 cannot be assigned; doc. &2 has different default PU type
464Assignment not possible; invalid partial assignment for document &1
465Unassignment not possible; invalid partial assignment for document &1
466Unassignment of req. doc. &1 from cap. doc. &2 not possible
467Delivery location changed for new delivery attempt of requirement doc. &1
468Cannot change dest. location of stage &1; succeeding stage is planned
469Planning not possible; no cross-company assignments allowed for doc. &1
470Planning not possible; no cross-company assignments for doc. type &1
471Cannot assign requirement &1 to doc. &2; no cross-company assign. allowed
472Action not possible; only linear stage sequences are supported
473Consignment order &1 created
474Number of consignment orders created: &1
475Assignment not possible; carrier doesn't match
476Assignment not possible; no common location sequence found
477Cannot remove requirement doc. &1; warehouse processing already started
478Planning not possible; warehouse processing already started for doc. &1
479Assignment not possible; deviating goods supplier within documents
480Can't assign requirement doc. to capacity doc. No location in req. doc.
481Equipment group &1 and equipment type &2 can't be used; they are blocked
482Can't assign schedule &1 to doc. &2; equip. type &3 is already assigned
483Planning not possible; equip. group &1/equip. type &2 has no capacity
484Can't assign equip. type &1 to document &2; document category mismatch
485Action not possible in FO &1 for customer self-delivery/pick-up.
486Cannot change assignments of doc. &1; load plan of item &2 is finalized
Privacy Policy