/SCMTMS/TC_RATES - BO Transportation Charges Rates
The following messages are stored in message class /SCMTMS/TC_RATES: BO Transportation Charges Rates.
It is part of development package /SCMTMS/FO_TC_TARIFF_CONF in software component TM-FRA. This development package consists of objects that can be grouped under "Foundation Object Customizing for BO TC Tariff".
It is part of development package /SCMTMS/FO_TC_TARIFF_CONF in software component TM-FRA. This development package consists of objects that can be grouped under "Foundation Object Customizing for BO TC Tariff".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Messages maintained from 100 onwards |
| 001 | Rate &1 released for usage |
| 002 | Rate &1 blocked for further use |
| 003 | Rate &1 marked for archiving |
| 004 | Rate &1 archived |
| 005 | Rate table &1: Validity &2-&3 released for use |
| 006 | Rate table &1: Validity &2-&3 blocked for further use |
| 007 | Rate table &1: Validity &2-&3 marked for archiving |
| 008 | Rate table &1: Validity &2-&3 archived |
| 009 | Scale base &1 used by scale &2 is not valid |
| 010 | Rate table deleted |
| 011 | Duplicate scale items exist |
| 012 | There must be at least 1 scale item with a multi. charge type dimension |
| 013 | Value type must match for rate table & scale item w/ multi. charge types |
| 014 | Value type and pos./neg. value must be the same for all charge types |
| 015 | Scale template &1 does not exist |
| 016 | Enter a filter variant description |
| 017 | Filter variant description already exists; enter a different description |
| 018 | Filter variant &1 saved |
| 019 | Maintain at least one filter criteria |
| 020 | Enter a percent or an amount |
| 021 | Enter a plus sign (+) or a minus sign (-) |
| 022 | No validity maintained for rate table &1 |
| 023 | Validity is inconsistent |
| 024 | Valid-to date &2 should be greater than valid-from date &1 |
| 025 | Enter a percent or an amount, not both |
| 026 | Update for rate table successful |
| 027 | Update failed |
| 028 | Specified validity period occurs outside existing validity periods |
| 029 | Specify valid-from date for rate |
| 030 | Specify valid-from date and valid-to date for rate |
| 031 | Update successful for the period from &1 to &2 |
| 032 | Unable to save log file |
| 033 | Enter a percent or an amount for absolute scale items, not both |
| 034 | Enter a percent or an amount for relative scale items, not both |
| 035 | Enter a percent or an amount for absolute scale items |
| 036 | Enter a percent or an amount for relative scale items |
| 037 | Invalid rounding profile |
| 038 | Update log for the rate table &1 |
| 039 | Current default rate table type is &1. You can have only one default. |
| 040 | You must specify a default type for local rate tables. |
| 041 | No head of organizational unit defined for position &1 in rate table &2 |
| 042 | Checking manager in HR: No active plan version exists |
| 043 | No user assigned to a position that is the head of organizational unit &1 |
| 044 | One or more organizational units are required |
| 045 | Organizational unit &1 is not valid |
| 046 | Organizational unit &1 already specified; remove unnecessary entry |
| 047 | Rate table &1; one or more validity periods awaiting approval |
| 048 | Enter a freight term |
| 049 | Enter percentage or amount for relative charge items |
| 050 | Job submitted for background processing |
| 051 | View job status using transaction SM37 |
| 052 | Enter a percent or an amount for absolute charge items, not both |
| 053 | Enter a percent or an amount for relative charge items, not both |
| 054 | Enter a value in the "Increase/Decrease" field |
| 055 | Update for calculation sheet successful |
| 056 | Simulation run |
| 057 | Production run |
| 058 | Simulation mode run; no database update for the period from &1 to &2 |
| 059 | Simulation mode run; no database update for specified validity periods |
| 060 | &1 rate records available for update |
| 061 | &1 rate records available for relative scale items |
| 062 | No suitable rate records available for rate update |
| 063 | Organizational unit &1 not valid in the current context |
| 064 | No rate values specified |
| 065 | Cannot select "Process in Background" and "Simulation Mode" in same run |
| 066 | Chrge usage of charge type &1 incompatible w/ header chrge usage &2 |
| 067 | Filter variant &1 deleted |
| 068 | Time zone &1 invalid; enter a valid time zone |
| 069 | Cannot create scale &1; only one relative scale allowed in the rate table |
| 070 | Cannot use scale item value &1 with dimension &2 |
| 071 | "Item with No Value Allowed" checkbox not selected for dimension &1 |
| 072 | Duplicate rate line exists |
| 073 | Not all local scales can be marked for archiving; cannot archive |
| 074 | &1 isn't a local rate table type. |
| 075 | Enter a validity start date and end date |
| 076 | Enter charge type |
| 077 | Enter valid currency |
| 078 | Cannot enter amount for charge type &1; enter percentage |
| 079 | No rate records found |
| 080 | Carrier &1 already specified; remove unnecessary entry |
| 081 | Carrier &1 is invalid |
| 082 | Only one default type allowed for local rate tables. Cur. default is &1 |
| 083 | You must specify a default type for rate tables. |
| 084 | &1 in rate template ID &2 isn't a local rate table type. |
| 085 | &1 is a local rate table type. |
| 086 | Enter rate table ID as rate table type &1 uses an external number range. |
| 087 | You can't have local rate table type &1 with an external number range. |
| 090 | &1 local rates skipped; they will be aged with their calculation sheets |
| 091 | &1 rate tables not aged due to references to calculation sheets |
| 101 | Charge type &1 not found |
| 102 | Specify charge type |
| 103 | Scale &1 does not exist |
| 104 | Scale &1 does not exist |
| 105 | Enter a validity start date |
| 106 | Enter a validity end date |
| 107 | Dimension index is not specified |
| 108 | Enter a calculation base |
| 109 | Enter a scale |
| 110 | Calculation base code &1 does not exist |
| 111 | Scale &1 does not exist |
| 112 | Dimension &1 is repeated |
| 113 | Dimension index is not in a proper sequence |
| 114 | Scale references are not consistent; rate maintenance is not possible |
| 115 | Rate value maint. is not allowed on incremental scale; formula only |
| 116 | On a &1 dimensional rate, &2 dimensional rate entries are not valid |
| 117 | Scale item key &1 of dimension &2 is invalid |
| 118 | At dimension &1, scale item key changed from &2 to &3; this is disallowed |
| 119 | Rate value is blank |
| 120 | Rate value negative; sign is also influenced by charge type |
| 121 | Rate value already created for given scale item key combinations |
| 122 | Reference to scale is not specified |
| 123 | Scale base &1 used by scale &2 is different from &3 used by calc. base &4 |
| 124 | Scale &1 is not active; only released scales can be used |
| 125 | ID &1 already exists; enter another value |
| 126 | Rate table is still in use; cannot be marked for archiving |
| 127 | Scale ID &1 and calculation base &2 are repeated |
| 128 | Enter a calculation method |
| 129 | Invalid calculation method code &1/&2 |
| 130 | Rate table &1 created in calc. sheet; only editable from the calc. sheet |
| 131 | Unit of measure cannot be blank |
| 132 | Value expected |
| 133 | Value cannot be negative |
| 134 | Validity start date &1 cannot be greater than end date &2 |
| 135 | Rate maintenance rejected; validity supports formula only |
| 136 | Currency &1 is invalid |
| 137 | Currency is not relevant |
| 138 | Enter a currency |
| 139 | Charge type is "Percentage"; enter "%" in "Currency" field |
| 140 | Cannot release; scale &1 not specified |
| 141 | Enter rate formula when rate maintenance mode is formula |
| 142 | Rate maintenance mode &1 is invalid |
| 143 | Formula is irrelevant |
| 144 | Start date &1 falls into another validity date range &2-&3 |
| 145 | End date &1 falls into another validity date range &2-&3 |
| 146 | Date range &1-&2 includes another validity date range &3-&4 |
| 147 | Date range &1-&2 falls within another validity date range &3-&4 |
| 148 | Scale references are inconsistent; rate cannot be saved |
| 149 | Definition has errors; release is not allowed |
| 150 | Release is not possible before releasing the rate table header |
| 151 | Definition has errors; you cannot mark for archiving |
| 152 | You cannot mark for archiving in current validity period |
| 153 | Rate formula ID &1 is invalid |
| 154 | Calculation method &1/&2 is repeated |
| 155 | Calculation base &1 already exists |
| 156 | No validity data present; rates cannot be saved |
| 157 | Please add scales |
| 158 | Current run does not consider residence period |
| 159 | Archiving setting is not maintained for BO &1 node &2 |
| 160 | Rate &1 cannot be archived as it is within residence period of &2 days |
| 161 | Calculation rule has errors |
| 162 | Validity &1 - &2, scale &3 has relative items; calculation rule expected |
| 163 | Cannot be marked for archiving; In Prep/Active/Blocked validity exists |
| 164 | Rate table maintenance is not possible as incremental scales are used |
| 165 | Specify charges usage code |
| 166 | Transportation charges usage code &1 is invalid |
| 167 | Start date of validity &1 is in the past |
| 168 | End date of validity &1 is in the past |
| 169 | Rates for minimum item cannot be blank |
| 170 | Dimension &1 is not present in Excel |
| 171 | Dimension &1: Rate table uses scale &2 but excel uses scale &3 |
| 172 | Dimension &1: Item &2 of scale &3 referred to in excel is not valid |
| 173 | Associated rate values will be ignored |
| 174 | Rate value &1 in Excel cell &2/&3 is ignored as it is not numeric |
| 175 | Contact support; Excel cell &1/&2 does not have mapping for dimension &3 |
| 176 | Excel cell &1/&2 value ignored as item &1 of scale &4 is invalid |
| 177 | Conversion error assigning value &4 of Excel cell &1/&2: &3 |
| 178 | File &1 is not a valid XML file |
| 179 | Cannot read rate data from XML file &1 |
| 180 | Enter a rate currency |
| 181 | Rate currency &1 is not valid |
| 182 | Rounding profile cannot be blank |
| 183 | Rates for maximum item cannot be blank |
| 184 | Rounding profile is irrelevant; entry &1 is not expected |
| 185 | Maintenance of min. rate value is not possible using incremental scale |
| 186 | Maintenance of max. rate value is not possible using incremental scale |
| 187 | Unit of measure is blank; rule is treated as multiplication factor |
| 188 | Calc. base is not specified; rule is treated as multiplication factor |
| 189 | Non-numeric calculation base &1 cannot have calculation rule |
| 190 | Unit of measure is irrelevant for the calculation base &1 |
| 191 | Calculation rule cannot be applied to relative scale as UoM is blank |
| 192 | Calc. rule cannot be applied to relative scale as calc. base is initial |
| 193 | Unit of measure is irrelevant for multiplication rules |
| 194 | Calc. base code &1 expects a value for UoM only once since it is repeated |
| 195 | Rate table &1 |
| 196 | &1 rate values were changed during upload |
| 197 | Rate ID &1 in Excel file does not match maintained rate ID &2 |
| 198 | Validity &1-&2 in Excel file does not match maintained validity &3-&4 |
| 199 | Performance: Large scales should be assigned to other dimensions than &1 |
| 200 | Only one dimension can be set as the minimum value |
| 201 | Only one dimension can be set as the maximum value |
| 202 | The dimension for the minimum and maximum value must be the same |
| 203 | Maintain charge type |
| 204 | Enter a scale type |
| 205 | Enter a scale unit of measure |
| 206 | Calc. rule application level "Scale Item" not allowed for calc. base &1 |
| 207 | Enter a scale currency |
| 208 | Calc. Base &1: Price unit not expected; enter price unit for scale items |
| 209 | Amount-based calculation rule not permitted |
| 210 | Price unit is irrelevant |
| 211 | Calculation rule application level is irrelevant |
| 212 | Scale type cannot be "To Scale" when "Minimum Value" is selected |
| 213 | Scale type cannot be "Base Scale" when "Maximum Value" is selected |
| 214 | Calculation base &1: Value expected for the price unit |
| 215 | Calculation base &1: Price unit cannot be negative |
| 216 | Only one dimension can have a scale item with no value |
| 217 | Specify a price unit for the relative scale item &1 |
| 218 | Enter a calculation base for rate scale dimension &1 |
| 219 | Enter either a currency value (absolute) or percentage value |
| 220 | Enter a calculation type |
| 221 | Charge type &1 is inactive |
| 222 | Only one dimension can be a multiple charge type |
| 223 | One dimension must be a multiple charge type |
| 224 | Rate table must allow multiple charge types |
| 225 | There must be at least one validity period with a charge type scale item |
| 226 | Rate table with multiple charge types must have two or more dimensions |
| 227 | Scale type for scale &1 must be "To Scale" in a ULD rate table |
| 228 | Select a ULD rate type |
| 229 | Weight scale items already created for all ULD rate types |
| 230 | Weight scale is mandatory for a ULD rate table |
| 231 | Scale type for scale &1 must be a base scale in a GCR rate table |
| 232 | Select �Minimum Rate Value� checkbox for scale &1 in a GCR rate table |
| 233 | Weight scale is mandatory for a GCR rate table |
| 234 | Only one scale item with rate class "N" can be created |
| 235 | Scale item with rate class "N" is mandatory for weight scale |
| 236 | Weight scale is mandatory for an SCR rate table |
| 237 | Commodity code scale is mandatory for an SCR rate table |
| 238 | Enter a rate category |
| 239 | Unit load device (ULD) scale is mandatory for a ULD rate table |
| 240 | Rate table &1 is marked for partial archiving |
| 241 | Rate table &1 does not have a validity period |
| 242 | Validity period &1 - &2 for rate table is less than the residence period |
| 243 | Validity period &1 - &2 status has to be released to be archived |
| 244 | Validity period &1 - &2 for rate table is marked for archiving |
| 245 | Items with ULD charge code "/A" and "/B" cannot co-exist in a rate table |
| 246 | Rate category of rate table different to that of scale or scale template |
| 247 | Cannot update rate table; table contains currency-relevant scale |
| 248 | Rate table &1: Validity from &2 to &3 awaiting approval |
| 249 | Rate table &1: Validity from &2 to &3 set to "In Process" |
| 250 | Rate table template &1 not found |
| 251 | Rate table template &1 does not contain scale template |
| 252 | Enter a rate table template |
| 253 | Validity requires "Currency" field in rate table template &1 |
| 254 | Rate internal numbering range is not maintained |
| 255 | Start value is blank |
| 256 | End value is blank |
| 257 | Step value is either blank or invalid |
| 258 | Start value is greater than end value |
| 259 | Scale or scale template expected, not both |
| 260 | Enter a unit of measure |
| 261 | Currency relevance and min./max. not allowed for the same scale |
| 262 | Calculation base &1 does not apply to the selected scale |
| 263 | Release Status: In process |
| 264 | Scales are released for &1 rate |
| 265 | Cannot select �Scale Item with No Value Allowed� for numeric scale items |
| 266 | Scales are not released for &1 rate |
| 267 | Rate identification cannot be blank |
| 268 | Scale base &1 used by calc. base &2 is different from &3 used by scale &4 |
| 269 | Rate table &1: One of the validity periods is not released for use |
| 270 | Maintain only one validity period |
| 271 | Maintain the contract rate category before specifying a validity period |
| 272 | Enter a commodity code type for calculation base &1 |
| 273 | New validity periods created for validity period from &1 to &2 |
| 274 | Validity period from &1 to &2 |
| 275 | Charge type should have transportation mode of "Air" or blank |
| 276 | E-mail not set for user in SU01; no e-mail notification sent for workitem |
| 277 | Cannot edit local rate table &1; one or more validities awaiting approval |
| 278 | Cannot delete carrier dimensions in an RFQ rate table |
| 279 | Cannot specify dimension as both capacity driver and capacity dimension |
| 280 | No capacity dimension specified; FCL or FTL scenario assumed |
| 281 | Specify at least one capacity driver |
| 282 | Specify just one capacity dimension |
| 283 | Empty scale items not allowed for calculation base &1 |
| 284 | Charges already exist in other scale combination for weight &1 |
| 285 | Rate charges with same rates already exist for weight &1 |
| 286 | Capacity from first row only used for set of cap. driver dimension items |
| 287 | Save document before proceeding |
| 288 | Do not enter a capacity driver for the relevant calculation base |
| 289 | Do not enter a capacity dimension for the relevant calculation base |
| 290 | Cap. dimension in rate table does not match cap. dimension for RFQ item |
| 291 | Cannot update rate table; table is protected |
| 292 | Charge type &1 used in rate table &2 is not found |
| 293 | Enter the date of the rate validity split |
| 294 | Date of rate validity split must be between start date and end date |
| 295 | Enter a start date for rate &1&2&3&4 |
| 296 | Enter an end date for rate &1&2&3&4 |
| 297 | Start date of rate &1&2&3&4 is earlier than start date of rate table val. |
| 298 | End date of rate &1&2&3&4 is later than end date of rate table validity |
| 299 | Start date is later than end date of rate &1&2&3&4 |
| 300 | Start date of rate &1&2&3&4 is earlier than end date of another rate |
| 301 | End date of rate &1&2&3&4 is later than start date of another rate |
| 302 | Rate val. split enabled in rate table &1; cannot copy validity &2 - &3 |
| 303 | Validity lines sorted in descending order of the start date |
| 304 | Invalid entry &1 |
| 305 | Entry already exists |
| 306 | Rate row found with one or more empty scale values and is ignored |
| 307 | Capacity not copied from rate table &1 to target rate table &2 |
| 308 | Rate-level dates adjusted for &1 rates in rate table &2 validity &3-&4 |
| 309 | &1 rates deleted in rate table &2 validity period &3-&4 |
| 310 | Rate table &1: Rate change requested for validity period &2 to &3 |
| 311 | Cannot enable rate validity split for ULD list rate table &1 |
| 312 | Enter up to 14 scale dimensions |
| 313 | Enter ULD charge code type |
| 314 | Scale with calculation base &1 has errors |
| 315 | Capacity lines not found |
| 316 | Calculation base &1: Unit of measure can't be blank. |
| 317 | You can have only one relative scale in the rate table. |
| 318 | Item &1: Calculation base should be &2 for calculation date type &3. |
| 319 | You can have only one holiday scale. &1 already exists. |
| 320 | Item &1: Specify the calculation date type for calculation base &2. |
| 321 | The maximum rate should be greater than the minimum rate. |
| 322 | The minimum rate should be lower than the maximum rate. |
| 400 | **MICROSOFT EXCEL INTEGRATION MESSAGES** |
| 401 | No items found for validity period &1 |
| 402 | Download canceled |
| 403 | Upload canceled |
| 404 | Error during upload; Microsoft Excel file could not be read |
| 405 | Error during upload; Microsoft Excel file is open |
| 406 | Error during upload; unknown error |
| 407 | Microsoft Excel workbook created for rate &1; cannot upload to &2 |
| 408 | Error during download; Microsoft Excel file could not be read |
| 409 | Error during download; unknown error |
| 410 | Download canceled by user |
| 411 | Upload canceled by user |
| 412 | Date &1 is not valid |
| 413 | Value &1 is invalid for the dimension &2 |
| 414 | Download failed |
| 415 | Excel sheet &1, line &2: Value &3 for dimension &4 does not exist |
| 416 | Uploaded with errors |
| 417 | Excel sheet &1, line &2: Value &3 for dimension &4 is not numeric |
| 418 | Excel sheet &1, line &2: Unknown error for dimension &3 during creation |
| 419 | Download complete |
| 420 | Upload complete |
| 421 | Save canceled |
| 422 | Save canceled |
| 423 | Upload complete; log download canceled |
| 424 | Upload complete; unknown error during log download |
| 425 | Rate identifier is more than 20 characters |
| 426 | Quantity &1 is not valid |
| 427 | Rate table template &1 is not valid |
| 428 | Upload failed: Excel could not be processed |
| 429 | Rate table template cannot be blank |
| 430 | &1 is lower than the first item (&2) for dimension �&3� |
| 431 | &1 is higher than the last item (&2) for dimension �&3� |
| 432 | Dimension &1 is not a valid choice |
| 433 | Excel sheet &1, line &2: Amount &3 is not numeric |
| 434 | Unknown error |
| 435 | No validity maintained for rate table &1; cannot create Excel workbook |
| 436 | Lower limit is greater than upper limit for dimension "&1" |
| 437 | Validity is inconsistent; cannot download rate table excel |
| 438 | Excel sheet &1, line &2: Value &3 for dimension &4 is in invalid format |
| 439 | Only maintained rates can be downloaded with rate notes |
| 440 | Unsaved data in the rate table; save the rate table before download |
| 441 | Excel sheet &1, line &2: Chrge ty. &3 has invalid value type or pos./neg. |
| 442 | Error (1) reading selection screen |
| 443 | Error (2) reading selection screen |
| 444 | No change detected between the uploaded Excel workbook and the rate table |
| 445 | Excel sheet &1, line &2: Rate class &3 is not valid for charge code &4 |
| 446 | Excel sheet &1, line &2: Scale type &3 is not valid for charge code &4 |
| 447 | Excel sheet &1: Line &2 and line &3 have incompatible data |
| 448 | Excel sheet &1, line &2: Does not have complementary data in line &3 |
| 449 | Excel worksheet &1, line &2: Cannot use charge code &3 |
| 450 | Excel sheet &1, line &2: For ULD rate type &3, charge code B exists. &4 |
| 451 | Excel sheet &1, line &2: Rate class should be �M� for minimum item |
| 452 | Excel sheet &1, line &2: Rate &3 has wrong format for currency &4 |
| 453 | Excel worksheet &1, line &2: Same gross weight for two item combinations |
| 454 | Maintain a validity period |
| 455 | Excel worksheet &1, line &2: Enter values for both pivot and over-pivot |
| 456 | Charge type does not exist in calculation sheet |
| 457 | Calculation resolution base does not exist in calculation sheet |
| 458 | Enter either one of new validity period or existing validity period |
| 459 | Charge type and validity are from different charge line items |
| 460 | Validity period does not exist |
| 461 | Dropdown for calc. base �&1� not downloaded; number of entries too large |
| 462 | Validity from date in worksheet name &1 does not exist in rate table |
| 463 | Unable to read file &1 in directory &2 |
| 464 | Unable to read the attributes for file &1 in directory &2 |
| 465 | Excel sheet &1, line &2: Currency &3 is invalid |
| 466 | Download failed; number of rate entries too large |
| 467 | Excel sheet not created for rate table &1; no suitable validity exists |
| 468 | Master strategy conditions can be updated only for a request line |
| 469 | Carrier strategy condition can be updated only for a carrier response� |
| 500 | ********************* XPRA Messages ********************* |
| 501 | XPRA &1 started on &2 &3 |
| 502 | XPRA &1 ended on &2 &3 |
| 503 | XPRA &1: Log cannot be written |
| 504 | &1 rate tables selected for update on client &2 |
| 505 | Number range not maintained for object &1 |
| 506 | Error with number range &1 for object &2 |
| 507 | Rate table &1 updated |
| 508 | Scales updated for rate table &1 |
| 509 | XPRA &1 unsuccessful: Changes not saved to database |
| 510 | Settlement profile determination condition &1 exists for organization &2 |
| 511 | Calculation profile not created for organization &1 |
| 512 | XPRA &1 successful: Changes saved to database |
| 513 | Problem detected with upgrade of rate table &1 |
| 514 | Restart the XPRA &1 |
| 515 | XPRA &1 unsuccessful; changes not saved to database tab. &2 for client &3 |
| 516 | XPRA &1 successful; changes saved to database table &2 for client &3 |
| 517 | "Zero Rate" checkbox selected for line item &1; rate set to zero |
| 518 | Rate higher than zero for line item &1; "Zero Rate" checkbox deselected |
| 519 | Client &1: Rate table &2 does not have a time zone |
| 520 | Client &1: Validity of rate table &2 does not have a date timestamp |
| 521 | Client &1: No rate records updated |
| 522 | Rate record not updated; charge type &1 does not exist in selected rows |
| 523 | Rate cleared for line item &1; "Zero Rate" checkbox selected |
| 524 | "Zero Rate" checkbox reselected for line item &1; enter a rate instead |
| 525 | Scale item &1 not valid for the involved rate table |
| 765 | Cannot set last or column dimension as "Scale Rel. for Crcy Maint." |
| 766 | Excel sheet &1, line &2: Invalid external organization ID |
| 767 | Latest validity &1 to &2 overlaps with validity &3 to &4 |
| 768 | Excel sheet &1, line &2: Inconsistent validity; validity cannot be blank |
| 769 | Excel sheet &1, line &2: Inconsistent validity |
| 770 | Excel sheet &1, line &2: Rate end date is later than rate table validity |
| 771 | Excel sheet &1, line &2: Rate start date is earlier than rate table val. |
| 772 | Rate table does not have a current validity period |
| 773 | Current validity period from &1 to &2 |
| 774 | Excel sheet &1, line &2: Contains invalid scale items |
| 775 | You can edit rate category if you delete the validity period |
| 776 | Microsoft Excel workbook data inconsistent; cannot be uploaded to &1 |
| 777 | Error during job submission |
| 778 | Job submitted for background processing; see job status in SM37 |
| 779 | Rate table download completed |
| 780 | Specified rate table not present in the server path |
| 781 | Can�t have min. value for non-numeric same scale w/ �Absolute� calc. ty. |
| 782 | Can�t have max. value for non-numeric same scale w/ �Absolute� calc. ty. |
| 783 | Number of columns for scale items is exceeding the limit |
| 784 | Error during cell creation as there are too many columns in the Excel |
| 785 | Rates already maintained; cannot add, update, or delete scales |
| 786 | Enter non-zero values for relative scale &1 |
| 787 | Add scales to the rate table. |
| 788 | Excel sheet &1: Specify a numeric value for the scale item |
| 789 | Excel sheet &1: Contains invalid scale items |
| 790 | You can use calculation base &1 only on the Charges tab. |
| 791 | Item &1: Add scales to the rate table. |
| 792 | You can define only one calculation rule for relative scales. |
| 793 | You can add only one relative scale for rate tables. |