/SCMTMS/UI_MESSAGES - Messages for TMS UI assistance classes
The following messages are stored in message class /SCMTMS/UI_MESSAGES: Messages for TMS UI assistance classes.
It is part of development package /SCMTMS/UI_CMN in software component TM-BF-UI. This development package consists of objects that can be grouped under "UI Common".
It is part of development package /SCMTMS/UI_CMN in software component TM-BF-UI. This development package consists of objects that can be grouped under "UI Common".
Message Nr ▲ | Message Text |
|---|---|
| 002 | Program error: &1 |
| 003 | Saved successfully |
| 004 | Saving failed |
| 005 | Start screen settings saved successfullly |
| 006 | Start screen settings could not be saved |
| 007 | |
| 008 | Check completed without errors |
| 009 | Saving not required; no changes were made |
| 010 | Cannot hide the Selection Criteria screen |
| 011 | Enter a document number |
| 012 | Enter a document type |
| 013 | Reassignment not supported |
| 014 | Rate table type &1 not found |
| 015 | Specify a rate table template or a rate table type, but not both |
| 016 | &1 documents found and selected for processing |
| 017 | Only &1 of &2 selected items have been processed successfully |
| 018 | Enter freight unit and freight unit item |
| 019 | Changes canceled |
| 020 | Feeder class parameter &1 not valid |
| 021 | Enter value for feeder class parameter &1 |
| 022 | This value will take effect only after an application restart |
| 023 | Cannot delete read-only profile and layout sets |
| 024 | Cannot merge dissimilar profile and layout sets; select similar sets |
| 025 | Instance class for page layout can't be used |
| 026 | Freight document not created; too many objects selected |
| 027 | Freight document not created; select at least one res. or freight unit |
| 028 | Freight doc. not created; select only one departure of a carrier schedule |
| 029 | Freight doc. not created; select schedule departures of one schedule only |
| 030 | Freight document not created; select at least one truck |
| 031 | Freight document not created; select at least one schedule departure |
| 032 | Freight document will be created for &1 schedule departures |
| 033 | Cannot change validity; layout &1 is used in profile and layout set &2 |
| 034 | Layout &1 copied |
| 035 | You have not entered a carrier selection setting; default settings used |
| 036 | You have not entered a planning profile; default planning settings used |
| 037 | Profile and layout set deleted successfully |
| 038 | Select entries |
| 039 | Select one entry |
| 040 | It is not possible to delete a layout with validity ALL or ROLE |
| 041 | You cannot use the screen area position twice |
| 042 | You cannot use the specified screen area width |
| 043 | An error occured during page layout check |
| 044 | Layout &1 saved successfully |
| 045 | Layout &1 deleted successfully |
| 046 | It is not possible to delete the standard layout |
| 047 | You cannot delete page layout &1; it is used in PL set &2 of user &3 |
| 048 | Page layout &1 already exists |
| 049 | Enter a name for the page layout |
| 050 | Trade lane data is missing |
| 051 | Error occured during creation of allocations |
| 052 | No allocations are selected |
| 053 | Inserting buckets is possible for allocations only |
| 054 | Profile and layout sets merged successfully |
| 055 | Error occured during creation of business shares |
| 056 | Enter complete path and file name |
| 057 | Enter time zone |
| 058 | Time zone &1 not found |
| 059 | Enter service level |
| 060 | Enter departure date |
| 061 | Enter arrival date |
| 062 | Enter pick-up date |
| 063 | Enter delivery date |
| 064 | Planning profile &1 not found |
| 065 | You did not specify a selection profile (FUs); no FU stages selected |
| 066 | Selection profile &1 not found |
| 067 | Enter carrier selection settings |
| 068 | You did not specify a selection profile (FOs); no freight orders selected |
| 069 | Arrival date must be before departure date |
| 070 | Fill all required entry fields |
| 071 | Upload of this file type not allowed (security issue) |
| 072 | URL does not pass security policy; upload failed |
| 073 | Enter quantity |
| 074 | Enter unit of measure |
| 075 | Enter carrier or standard carrier alpha code |
| 076 | User ID &1 not found |
| 077 | PFCG role &1 not found |
| 078 | Enter user ID |
| 079 | Enter PFCG role |
| 080 | You are not authorized to execute the page layout application |
| 081 | You are not authorized to create a page layout |
| 082 | You are not authorized to edit this page layout |
| 083 | You are not authorized to delete this page layout |
| 084 | You are not authorized to display page layout |
| 085 | Order details cannot be used without FO / TU list or hierarchy |
| 086 | Schedule ID &1 not found |
| 087 | Enter schedule ID |
| 088 | URL not valid; check if the URL contains the protocol (http/https) |
| 089 | Planning horizon begins in the past |
| 090 | Start date of planning horizon is after end date |
| 091 | Select at least one entry |
| 092 | Trailer assignment: No appropriate locations found |
| 093 | Coupling after uncoupling is not possible; check entered location |
| 094 | Coupling location cannot be used with the uncoupling location |
| 095 | Enter a departure date that is before the arrival date |
| 096 | Enter a pick-up date that is before the delivery date |
| 097 | You did not specify a sel. profile (FBs); no freight bookings selected |
| 098 | SCAC &1 not found |
| 099 | &1 is not a valid SCAC for the carrier &2 |
| 100 | You did not specify a selection profile (TUs); transp. units not selected |
| 101 | Driver &1 does not exist |
| 102 | Enter a driver |
| 103 | Enter a valid user range |
| 104 | No authorization to change decision table &1 |
| 105 | No authorization to display decision table &1 |
| 106 | Decision table &1 cannot be locked |
| 107 | Capacity selection settings &1 not found |
| 108 | Carrier selection settings &1 not found |
| 109 | Incompatibility settings &1 not found |
| 110 | Select profile and layout set |
| 111 | Instance of Manual Planning interface is not available |
| 112 | Select only one freight order |
| 113 | An instance of business object /SCMTMS/PLN is not available |
| 114 | Business partner &1 does not exist |
| 115 | Customer-specific function &1 does not exist |
| 116 | Carrier &1 does not exist |
| 117 | Carrier for SCAC &1 does not exist |
| 118 | Select at least one freight order |
| 119 | Select at least one freight unit |
| 120 | Select at least one freight unit or business document |
| 121 | Error while adding UIBB configuration &1 to section &2 |
| 122 | Error while adding content area &1 |
| 123 | Error while adding the section &1 to content area &2 |
| 124 | Error while adding wire for UIBB config. &1 in content area &2 |
| 125 | Error while adding the action &1 to content area &2 |
| 126 | Select at least one transportation unit |
| 127 | Transportation cockpit: No objects imported |
| 128 | Profile and layout set &1 does not exist |
| 129 | Dragging and dropping within the same list is not supported |
| 130 | Freight booking cannot be assigned to a freight order or freight booking |
| 131 | Trailer cannot be assigned to trailer |
| 132 | Select only one tendering response |
| 133 | Subcontracting not allowed |
| 134 | Location &1 does not exist |
| 135 | Freight order cannot be assigned to freight order |
| 136 | No applicable freight units selected |
| 137 | Select one tendering process |
| 138 | Popup area is not a dialog type |
| 139 | New area cannot be added to the application |
| 140 | New section cannot be added to the application |
| 141 | New UIBBs cannot be added to the application |
| 142 | New wire cannot be added to the application |
| 143 | Drag selected objects on a specific table line (not between two lines) |
| 144 | Drag either tendering steps or carriers |
| 145 | Dragging target not supported |
| 146 | No action defined for content area |
| 147 | Error while using drag and drop |
| 148 | Could not add action &1 to content area &2 |
| 149 | Dragging the selected items &1 is not supported |
| 150 | Dropping the selected items to object &1 is not supported |
| 151 | Document type &1 not valid |
| 152 | Select one step or one carrier to change stop dates |
| 153 | Popup area cannot be removed |
| 154 | Content areas cannot be read |
| 155 | Enter a document type |
| 156 | Vehicle resource &1 not found |
| 157 | Trailer resource &1 not found |
| 158 | Transportation unit resource &1 not found |
| 159 | Enter truck resource |
| 160 | Enter trailer resource |
| 161 | Enter transportation unit resource |
| 162 | Content area &1 cannot be changed |
| 163 | Section &1 cannot be changed |
| 164 | Optimizer log does not exist |
| 165 | Optimizer solution accepted |
| 166 | Optimizer solution canceled |
| 167 | No selection profile entered for profile and layout set &1 |
| 168 | Select a transportation proposal |
| 169 | Error during navigation to optimizer explanation tool |
| 170 | Select one entry only |
| 171 | Ranking number of first entry cannot be decreased |
| 172 | Truck resource &1 assigned to MTr &2; can only be planned with schedules |
| 173 | Ranking number of last entry cannot be increased |
| 174 | Entered truck resource &1 is not an active vehicle resource |
| 175 | Entered trailer resource &1 is not a passive vehicle resource |
| 176 | A carrier is already assigned to the selected freight orders |
| 177 | Different carriers assigned to the selected freight orders |
| 178 | Carrier &1 exists multiple times with different rankings |
| 179 | Select only one entry |
| 180 | Enter either a truck or a trailer |
| 181 | One entry can be moved; deselect lines |
| 182 | Location does not exist |
| 183 | Maintain location |
| 184 | Select one step, one RFQ, or one quotation to access stop dates |
| 185 | Maintain freight unit |
| 186 | Maintain activity |
| 187 | Assignment not possible; no location for freight order |
| 188 | Only loading is possible at the first location |
| 189 | Only unloading is possible at the last location |
| 190 | Select only one quotation to access stop dates |
| 191 | Schedule &1 is not a carrier schedule |
| 192 | Schedule &1 is not a gateway schedule |
| 193 | To insert a stage, select one stage for the ordered or actual route |
| 194 | Reassignment of the selected item &1 not possible |
| 195 | Too many targets for reassignment selected |
| 196 | Select a valid item |
| 197 | Select a valid target for reassignment |
| 198 | It is not possible to remove an assignment for &1 |
| 199 | &1 not possible for &2 |
| 200 | No PPF actions for external communication configured |
| 201 | Define configuration settings for dual view in page layout &1, object &2 |
| 202 | Define hierarchy type for dual view in page layout &1, object &2 |
| 203 | Filter criteria "Pick-Up Date (From/To)" should not be used twice |
| 204 | Filter criteria "Delivery Date (From/To)" should not be used twice |
| 205 | Hierarchy type &1 not found |
| 206 | Select only one location |
| 207 | View &2 of list &3 is not valid in page layout &1 |
| 208 | Hierarchy type &1 of list &2 does not match association &3 in &4 |
| 209 | Enter a filter attribute |
| 210 | Enter an operator for filter attribute &1 |
| 211 | Pick-Up Date (From) is greater than Pick-Up Date (To) |
| 212 | Delivery Date (From) is greater than Delivery Date (To) |
| 213 | Filter operator cannot be used with filter attribute &1 |
| 214 | Filter value &1 for filter attribute &2 contains invalid characters |
| 215 | You cannot use a wildcard with filter value &1 for filter attribute &2 |
| 216 | Date &1 is invalid |
| 217 | Time &1 is invalid |
| 218 | Transportation proposal preferences have been reset |
| 219 | Transportation proposal settings copied from profile &1 |
| 220 | Contract basis &1 not found |
| 221 | Edit not possible; editing not enabled in Customizing |
| 222 | Some documents cannot be processed because they are completed or canceled |
| 223 | & documents were blocked |
| 224 | & documents were unblocked |
| 225 | Error occured during creation of trade lane |
| 226 | Hierarchy type &1 of list &2 can not be used in transp. cockpit layout &3 |
| 227 | Hierarchy type &1 of dual view def. of list &2 is not valid for layout &3 |
| 228 | Enter either a locomotive or a railcar |
| 229 | Locomotive &1 not found |
| 230 | Railcar &1 not found |
| 231 | Locomotive &1 is a passive vehicle resource; choose another locomotive |
| 232 | Railcar &1 is not a passive vehicle resource; choose another railcar |
| 233 | Locomotive &1 assigned to MTr &2; can only be planned with schedules |
| 234 | Railcar &1 assigned to MTr &2; can only be planned with schedules |
| 235 | Trailer &1 assigned to MTr &2; can only be planned with schedules |
| 236 | Enter a locomotive |
| 237 | Enter a railcar |
| 238 | Select at least one freight unit or transportation unit |
| 239 | Hierarchy cannot be used; not all container unit stages selected |
| 240 | Container resource &1 not found |
| 241 | Enter container resource |
| 242 | Freight document not created; select at least one locomotive |
| 243 | Trailer unit not created; select at least one trailer |
| 244 | Railcar unit not created; select at least one railcar |
| 245 | Container unit not created; select at least one container |
| 246 | You have already maximized the view |
| 247 | Container resource &1 used; equipment group/type not considered |
| 248 | Truck resource &1 not found |
| 249 | Select at least one truck |
| 250 | Select at least one trailer |
| 251 | Select at least one locomotive |
| 252 | Select at least one railcar |
| 253 | Select at least one container |
| 254 | Context determination for selected res. did not return any assigned docs. |
| 255 | Select a valid business partner |
| 256 | Reprocessing of Delivery Split or Update started for &1 failed deliveries |
| 257 | Enter a passive means of transport; MTr &1 is active |
| 258 | Enter an active means of transport; MTr &1 is passive |
| 259 | Enter a means of transport with transportation mode "rail" |
| 260 | Enter a means of transport with transportation mode "road" |
| 261 | Enter a means of transport with transportation mode "air" |
| 262 | Enter a means of transport with transportation mode "ocean" |
| 263 | Select at least one relevant freight order for driver assignment |
| 264 | Select at least one driver |
| 265 | Enter driver for road freight orders; &1 is not a road freight order |
| 266 | Number of individual resources for &1 is higher than def. in master data |
| 267 | Driver assignment per stage only possible for one FO stage via popup |
| 268 | Enter an arrival date that is after the departure date |
| 269 | Enter a delivery date that is after the pick-up date |
| 270 | Select at least one resource or equipment type |
| 271 | Resource &1 cannot be used; it is blocked for planning |
| 272 | Select at least one business document |
| 273 | Resource/equipment type &1 does not exist |
| 274 | Enter a valid user type |
| 275 | Number of profile and layout sets with updated user assignment: &1 |
| 276 | Number of user assignments removed: &1 |
| 277 | Number of user assignments created/updated: &1 |
| 278 | Same value already exists; enter a different value |
| 279 | You are not authorized to use the PLS Management application |
| 280 | The status you selected is only available for road freight orders |
| 281 | This status can only be set for FDs with the same transportation mode |
| 282 | You are not authorized to create profile and layout sets |
| 283 | You are not authorized to change profile and layout sets |
| 284 | You are not authorized to delete profile and layout sets |
| 285 | Registration number will be updated in the predecessor document. |
| 286 | Package unit &1 selected; this action is not possible for package units |
| 287 | Select at least one freight unit or package unit |
| 288 | Hierarchy can't be used; not all package unit stages selected |
| 289 | &1 items missing in selection; TC continues with complete selection |
| 290 | &1 items don't have required status; tramsp. cockpit removes these items |
| 291 | Item selection not sufficient; TC continues with changed selection |
| 292 | Technical inconsistency detected in method: &1 |
| 293 | Select at least one consignment order |
| 294 | You need to select a stop |
| 295 | Select at least one container unit |
| 296 | Display mode: It's not possible to change data |
| 297 | Capacity document not created; select at least one equipment type |
| 298 | Planning not possible; multiple types of resources/equip. types selected |
| 299 | Capacity doc. can only be created for equipment types of same category |
| 300 | Select at least one requirement list |
| 301 | Select at least one order list |
| 302 | Select at least one order detail list |
| 303 | Select at least one capacity list |
| 304 | Select at least one delivery list |
| 305 | It is not possible to move up the selected entries |
| 306 | It is not possible to move down the selected entries |
| 307 | Select at least one requirement group list |
| 308 | Select at least one result list for the transportation proposal |
| 309 | Select at least one map entry |
| 310 | Select at least one transportation unit list |
| 311 | Select at least one hierarchy list |
| 312 | Select at least one gantt chart list |
| 313 | Select at least one line in top left area |
| 314 | Select at least one line in top right area |
| 315 | Select at least one line in middle left area |
| 316 | Select at least one line in middle right area |
| 317 | Select at least one line in bottom left area |
| 318 | Select at least one line in bottom right area |
| 319 | Select at least one requirement document |
| 320 | Select only one profile and layout set |
| 321 | Select at least one requirement document stage |
| 322 | Normalized Quantity per Product and UoM (&1 Documents Selected) |
| 323 | Actual Data for Product &1 |
| 324 | Can't save normalized quantities due to foreign lock |
| 325 | Loading point &1 doesn't exist |
| 326 | Warehouse number &1 doesn't exist |
| 327 | Enter an equipment type |
| 328 | Equipment type &1 not found |
| 329 | You aren't allowed to insert equipment types for transp. mode Sea and Air |
| 330 | Cannot delete page layout &1; layout used in transport cockpit layout &2 |
| 331 | Cannot change user; page layout &1 used in transp. cockpit layout &2 |
| 332 | Page layout &1: Map displayed, but pushbuttons for map not activated |
| 333 | Page layout &1: Pushbuttons for map activated, but map not displayed |
| 334 | Enter a layout for the gantt chart in page layout &1 |
| 335 | Page layout &1: Layout for gantt chart &2 not found |
| 336 | Enter a layout for the load plan in page layout &1 |
| 337 | Page layout &1: Layout for load plan &2 not found |
| 338 | Pushbutton &1 activated, but map not displayed |
| 339 | Width was reset; width of adjacent areas is more than 100% |
| 340 | Number of pushbuttons updated in the existing page layouts: &1 |
| 341 | Pushbutton &1 activated, but preferences not displayed |
| 342 | To fix incorrect configuraton, &1 is now displayed as a button |
| 343 | The button &1 appears twice; one instance was removed |
| 344 | Page Layout "&1" contains objects unsupported in additional windows |
| 345 | Cannot delete page layout &1; it is used for the additional window in &2 |
| 346 | Cannot change user; layout &1 is used for the additional window in &2 |
| 347 | The user/role &1 is unassigned to the additional window page layout &2 |
| 348 | Add more UIBBs to layout &1 or deactivate Smart Add in Gantt layout &2 |
| 349 | Page layout &1 contains unsupported pushbutton "&2" in additional window |
| 350 | Page layout &1 contains unsupported content "&2" in additional window |
| 351 | Can't assign user &1; the used page layout &2 isn't assigned to user &1 |
| 352 | Can't assign role &1; the used page layout &2 isn't assigned to role &1 |
| 353 | Can't assign page layout &2; user &1 isn't assigned to page layout &2 |
| 354 | Can't assign page layout &2; role &1 isn't assigned to page layout &2 |
| 355 | Page layout &1 is already assigned to page layout switch |
| 356 | Can't change user/role assignment; layout &1 is used for switch in &2 |
| 357 | Page layout &1: User/role assignment &2 missing in layout &3 for switch |
| 358 | Can't delete page layout &1; it is used for page layout switch in &2 |
| 359 | Enter a page layout for page layout switch within page layout &1 |
| 360 | You can't insert this equipment type |
| 361 | Select at least one ocean freight booking |
| 362 | Equipment type &1 cannot be used; restricted use in planning |
| 363 | &1 is not a truck type and so can't be inserted |
| 364 | &1 is not a trailer type and so can't be inserted |
| 365 | &1 is not a locomotive type and so can't be inserted |
| 366 | &1 is not a railcar type and so can't be inserted |
| 367 | &1 is not a container type and so can't be inserted |
| 368 | Vehicle type &1 cannot be used; it is blocked for planning |
| 370 | Transportation mode &1 not found |
| 400 | Navigation is supported only on the launchpad |
| 401 | Navigation not defined for business document type &1 |
| 402 | No business document type exists for document; navigation not possible |
| 403 | Navigation not possible; object was not saved or no longer exists |
| 404 | Navigation not possible; more than one Original Document exists |
| 421 | Transportation mode category &1 is not suitable for air transportation |
| 422 | Transportation mode &1 is not suitable for air transportation |
| 423 | Shipping type &1 does not match transportation mode category &2 |
| 424 | Shipping type &1 does not match transportation mode &2 |
| 425 | No compatible stage type found for transportation mode &1 |
| 426 | &1 is not of transportation mode road |
| 452 | Document &1 not found |
| 453 | Document &1 is a template |
| 454 | Type &2 of document &1 not in Customizing |
| 455 | Type &2 of document &1 is not a forwarding order type |
| 456 | Type &2 of document &1 is not an air-specific type |
| 457 | Type &2 of document &1 is not a direct shipment type |
| 458 | Type &2 of doc. &1 is not a type where "Same Loc. and BPs" is selected |
| 471 | Forwarding order type &1 not found in type Customizing |
| 472 | Type &1 is not a forwarding order type |
| 473 | Forwarding order type &1 is not an air-specific type |
| 474 | Forwarding order type &1 is not a direct shipment type |
| 475 | Direct shipment &1 supports only "Same Loc. and BPs" in type customizing |
| 476 | Automatic FU building must be enabled in "Direct Shipment" FWO type &1 |
| 477 | System does not support creating a "Direct Shipment" FWO as a template |
| 478 | Cannot set HBL or HAWB status for freight unit &1 due to missing number |
| 479 | Status set to "Finalized" for HBL or HAWB &1 |
| 480 | Status set to "Not Finalized" for HBL or HAWB &1 |
| 481 | HBL or HAWB &1 has been finalized; HBL or HAWB cannot be unassigned |
| 482 | Freight unit &1 is already assigned to HBL or HAWB &2 |
| 483 | No HBL or HWB number found for forwarding order &1 |
| 484 | HBL or HAWB &1 is finalized; freight unit &2 cannot be assigned |
| 485 | Select either a freight unit or a cargo item |
| 486 | Item &1 has already been assigned to HBL or HAWB &2 |
| 487 | HBL or HAWB &1 has been finalized; item cannot be assigned |
| 488 | No HBL or HAWB exists that has the status "Not Finalized" |
| 489 | HBL or HAWB is drawn for item; action is not possible for freight unit |
| 490 | HBL or HAWB is drawn for freight unit; action is not possible for item |
| 491 | Movement type or stage profile not defined in Customizing |
| 492 | Forwarding order type &1 does not contain a stage profile |
| 493 | Selected item is not relevant for HBL or HAWB number |
| 494 | No consignment orders selected; specify a selection profile for them |
| 495 | Purchasing document &1 not found |
| 500 | No forwarding order types found; check table /SCMTMS/C_TRQTY |
| 501 | No forwarding quotation types found; check table /SCMTMS/C_TRQTY |
| 502 | Forwarding order type &1 not found |
| 503 | Forwarding quotation type &1 not found |
| 504 | Forwarding order &1 not found |
| 505 | Forwarding quotation &1 not found |
| 506 | Delivery-based transportation requirement &1 not found |
| 507 | Order-based transportation requirement &1 not found |
| 508 | Forwarding order is already planned |
| 509 | Delivery profile &1 not found |
| 510 | Freight order type &1 not found |
| 511 | Freight unit type &1 not found |
| 512 | Freight booking type &1 not found |
| 513 | Transportation unit type &1 not found |
| 514 | Freight order &1 not found |
| 515 | Freight unit &1 not found |
| 516 | Freight booking &1 not found |
| 517 | Transportation unit &1 not found |
| 518 | Service order type &1 not found |
| 519 | Service order &1 not found |
| 520 | Object &1 not found |
| 521 | Deletion cannot be reverted; do you want to delete current document? |
| 522 | Select only one location to set status |
| 523 | Choose an option |
| 524 | Air-specific forwarding order type &1 not found |
| 525 | Ocean-specific forwarding order type &1 not found |
| 526 | Air-specific forwarding quotation type &1 not found |
| 527 | Ocean-specific forwarding quotation type &1 not found |
| 528 | More than one src. and dest. stop but only attributes of &1 are defined |
| 529 | Freight settlement document &1 not found |
| 530 | Forwarding settlement document &1 not found |
| 531 | Charge correction advice &1 not found |
| 532 | Freight agreement &1 version &2 not found |
| 533 | Tariff &1 not found |
| 534 | Calculation sheet &1 not found |
| 535 | Rate table &1 not found |
| 536 | Scale &1 not found |
| 537 | Supplier payment &1 not found |
| 538 | Freight order &1 not found |
| 539 | Handling resource &1 not found |
| 540 | Labor resource &1 not found |
| 541 | Transportation unit resource &1 not found |
| 542 | Vehicle resource &1 not found |
| 543 | Waybill number range &1 not found |
| 544 | Incompatibility &1 not found |
| 545 | Scale template &1 not found |
| 546 | Cannot open scale until rate table is saved; save rate table |
| 547 | Cost function &1 not found |
| 548 | Decreasing capacity &1 not found |
| 549 | Time-related selection attributes &1 not found |
| 550 | Additional selection attributes &1 not found |
| 551 | Freight unit building rule &1 not found |
| 552 | Geographical selection attributes &1 not found |
| 553 | Optimizer settings &1 not found |
| 554 | Planning costs &1 not found |
| 555 | Planning profile &1 not found |
| 556 | Equipment type &1 with equipment group &2 not found |
| 557 | Time constraint &1 not found |
| 558 | Enter at least freight unit building rule or equipment type and group |
| 559 | Enter equipment type and equipment group |
| 560 | Rate table template &1 not found |
| 561 | Calculation sheet template &1 not found |
| 562 | Scale template &1 not found; check in Customization |
| 563 | Mandatory field &1 is missing |
| 564 | Input of &1 is not in valid range of 0-100 |
| 565 | Specified selection criteria &1 are invalid |
| 566 | Carrier &1 not found |
| 567 | You have not specified any selection criteria |
| 568 | More than one planning profile is maintained |
| 569 | More than one Transportation Cockpit layout is maintained |
| 570 | More than one Optimizer Result layout is maintained |
| 571 | More than one pick-up day for &1 is maintained |
| 572 | More than one delivery day for &1 is maintained |
| 573 | Page layout &1 not found |
| 574 | Transportation zone &1 not found |
| 575 | More than one selection horizon day for schedules is maintained |
| 576 | Means of transport &1 not found |
| 577 | Equipment type &1 not found |
| 578 | Equipment group &1 not found |
| 579 | More than one Planned Requirement attributes of &1 are maintained |
| 580 | More than one Blocked Document attributes of &1 are maintained |
| 581 | More than one Both Location attributes of &1 are maintained |
| 582 | First value for departure date must be before second value |
| 583 | First value for arrival date must be before second value |
| 584 | Choose one departure date for your selection |
| 585 | Choose one arrival date for your selection |
| 586 | Only one pick-up date for &1 is allowed when using pick-up days for &2 |
| 587 | Only one delivery date for &1 is allowed when using delivery days for &2 |
| 588 | Only one selection horizon date is allowed when using selection hor. days |
| 589 | Pick-up date and days for &1 maintained; operator IS is allowed only |
| 590 | Delivery date and days for &1 maintained; operator IS is allowed only |
| 591 | Sel. Horizon date and days maintained; operator IS is allowed only |
| 592 | "From" value &1 is greater than "To" value &2 in range definition of &3 |
| 593 | Could not create a forwarding order of type &1 |
| 594 | Could not create a forwarding quotation of type &1 |
| 595 | Could not create a freight order of type &1 |
| 596 | Could not create a booking of type &1 |
| 597 | Could not create a service order of type &1 |
| 598 | Value of this field must not be longer than &1 characters |
| 599 | Cannot convert condition value because of inconsistent condition value |
| 600 | Result data element &1 of condition not allowed for incomp. definition |
| 601 | Forwarding agreement &1 version &2 not found |
| 602 | Mutual agreement &1 version &2 not found |
| 603 | Document &1 not found |
| 604 | No forwarding agreement types found; check in Customization |
| 605 | No freight agreement types found; check in Customization |
| 606 | No mutual agreement types found; check in Customization |
| 607 | Forwarding agreement type &1 not found; check in Customization |
| 608 | Freight agreement type &1 not found; check in Customization |
| 609 | Mutual agreement type &1 not found; check in Customization |
| 610 | Agreement type &1 not found; check in Customization |
| 611 | Rate table &1 not found |
| 612 | Item ID &1 references freight booking &2 |
| 613 | Item ID &1 references freight order &2 |
| 614 | Credit memo &1 not found |
| 615 | Agreement &1 version &2 archived or marked for archiving |
| 616 | Editing is not possible; status is "Archiving in Process" or "Archived" |
| 617 | This function is only available on the launchpad |
| 618 | Schedule type &1 not found |
| 619 | Enter a schedule type |
| 620 | Default route type &1 not found |
| 621 | Enter a default route type |
| 622 | Enter a default route ID |
| 623 | Service product catalog &1 not found |
| 624 | Internal agreement &1 version &2 not found |
| 625 | No internal agreement types found; check your Customizing settings |
| 626 | Service product catalog type &1 not found |
| 627 | Enter the transportation mode for &1 |
| 628 | You can use only one reference document to create a forwarding order |
| 629 | Forwarding quotation template &1 not found |
| 630 | Forwarding order template &1 not found |
| 631 | Document &1 is a template, not a &2 |
| 632 | Permitted number of copies from document &1 exceeded |
| 633 | Forwarding agreement item &1 not found |
| 634 | Document &1 is not a forwarding order |
| 635 | Validity period of forw. agreement &1, vers. &2 has expired or is invalid |
| 636 | Cannot create trailer unit of type &1 |
| 637 | Document type &1 is not compatible with reference document &2, version &3 |
| 638 | Document &1 is not a template for creating &2 |
| 639 | FWO type &1 assigned in FWA Customizing is invalid; incompatibility in &2 |
| 640 | FWQ type &1 assigned in FWA Customizing is invalid; incompatibility in &2 |
| 641 | &1 &2 is invalid |
| 642 | Values for fields &1 replaced with values assigned in Customizing |
| 643 | Value for field &1 replaced with value assigned in Customizing |
| 644 | Agreement &1 version &2 awaiting approval |
| 645 | Trailer type &1 not found |
| 646 | Trailer unit &1 not found |
| 647 | Forwarding agreement &1 not found |
| 648 | Freight agr. RFQ master/forwarding agr. quotation &1 does not exist |
| 649 | Freight order &1 not found |
| 650 | Freight order type &1 not found |
| 651 | Cannot create freight order of type &1 |
| 652 | RFQ &1 version &2 is at status "&3" |
| 653 | Cannot create railcar unit of type &1 |
| 654 | Railcar type &1 not found |
| 655 | Load planning settings &1 not found |
| 656 | Railcar unit &1 not found |
| 657 | You cannot display freight agreement RFQ &1; it is a sealed bid |
| 658 | Carrier invoice &1 not found |
| 659 | Container unit type &1 not found |
| 660 | Select a business partner by using the selection help |
| 661 | Customs office of exit &1 does not exist |
| 662 | Customs office of entry &1 does not exist |
| 663 | Document switches to manual mode after save. No more communication to GTS |
| 664 | Forwarding agreement quotation template &1 not found |
| 665 | Container unit &1 not found |
| 666 | Cannot create container unit of type &1 |
| 667 | Container unit &1 not found |
| 668 | Enter valid transportation mode |
| 669 | Freight agreement RFQ master &1 does not exist |
| 670 | Cannot perform wildcard search; enter complete value |
| 671 | Dispute case &1 not found |
| 672 | Agreement-based transportation requirement &1 not found |
| 673 | Enter freight unit |
| 674 | Enter freight unit item |
| 675 | Freight unit item &1 not found |
| 676 | Select only one discrepancy |
| 677 | Forwarding agreement &1, version &2 not found |
| 678 | Forwarding agreement &1, version &2, item &3 not found |
| 679 | Doc. type &1 is not compatible with ref. document &2, version &3, item &4 |
| 680 | Freight carrier credit memo &1 not found |
| 681 | Manual planning settings &1 not found |
| 682 | Page layout &1 already locked in request &2; release or reuse request |
| 683 | Page layouts assigned to transport request &1 |
| 684 | Page layouts could not be assigned to transport request &1 |
| 685 | Enter a Customizing request |
| 686 | Enter a transport request with source client &1 |
| 687 | Transport request &1 cannot be selected; no authorization or other reason |
| 688 | Transport not possible; unsaved changes exist |
| 689 | Transport request &1 locked by user &2; changes could not be saved |
| 690 | Select at least one check option |
| 691 | Selected layout context cannot be used; select another layout context |
| 692 | &1 pushbuttons were added to the existing page layouts |
| 693 | &1 pushbuttons were deleted from the existing page layouts |
| 694 | &1 content objects were deleted from the existing page layouts |
| 695 | &1 content objects were updated in the existing page layouts |
| 696 | No deviations from Customizing found; existing page layouts not changed |
| 697 | Changes not saved as defined in the settings |
| 698 | Specify quotation template or quotation type, not both |
| 699 | Specify either RFQ template or RFQ type, not both |
| 700 | Condition is already assigned to transport request &1 |
| 701 | Select two ports that are part of the same voyage |
| 702 | Select two ports |
| 703 | Select an airport of departure and an airport of destination |
| 704 | Select two airports that are part of the same flight |
| 705 | Select two airports |
| 706 | Select a source and a destination location |
| 707 | Select two locations that are part of the same departure |
| 708 | Select two locations |
| 709 | Enter a valid value; it must be a number |
| 710 | Select two ports of the same schedule |
| 711 | Select two airports of the same schedule |
| 712 | Select two locations of the same schedule |
| 713 | RFQ template &1 not found |
| 714 | Enter a port of loading and a port of discharge |
| 715 | Manual agreement selection enabled; no automatic charge calculation |
| 716 | Forwarding Order: &1 |
| 717 | Freight Order: &1 |
| 718 | Forwarding Settlement: &1 |
| 719 | Freight Settlement: &1 |
| 720 | Direct Shipment Forwarding Order: &1 |
| 721 | Enter a sequence number |
| 722 | &1 copies created |
| 723 | Restrict total number of copies to less than 1000 |
| 724 | You are not authorized to perform this action |
| 725 | Restrict total number of documents to less than &1 |
| 726 | Item ID &1 ref. FB &2 with item split; quantity changes are not copied |
| 727 | Package unit &1 not found |
| 728 | Package unit type &1 not found |
| 729 | Cannot create package unit of type &1 |
| 730 | FWAQ assignment &1 does not exist |
| 731 | Freight agreement RFQ master assignment &1 already exists for item &2 |
| 732 | FWAQ assignment &1 has different FWAQ type |
| 733 | Freight agreement RFQ master assignment &1 created |
| 734 | Enter valid freight agreement RFQ master assignment |
| 735 | Freight agreement RFQ master assignment does not exist for item |
| 736 | Freight agreement RFQ master assignment updated |
| 737 | No updates required for freight agreement RFQ master assignment |
| 738 | Number range not specified for freight agreement RFQ master assignment |
| 739 | Can't create package units; only select documents of the same type |
| 740 | Execution of the deleted or moved items has already started |
| 741 | Package building not possible; no planning profile specified |
| 742 | Enter a valid value; it must be a positive number |
| 743 | Consignment order &1 not found |
| 744 | Consignment order type &1 not found |
| 745 | Cannot create consignment order of type &1 |
| 751 | At &1, specify either screening method or screening exemption, not both |
| 752 | Screening method is missing in at least one line |
| 753 | Screening method requires a free text |
| 754 | FWAQ ID and FWAQ Assignment ID cannot be the same |
| 755 | Enter a valid forwarding agreement quotation assignment ID |
| 756 | &1: Specify a screening method before entering a free text |
| 757 | &1: The screening method and the free text specified are incompatible |
| 758 | Air Cargo Security Status &1 requires more than one Screening Method |
| 770 | Condition &1 not found |
| 771 | Trade lane &1 not found |
| 772 | Stock &1 not found |
| 773 | Internal settlement document &1 not found |
| 800 | Condition is already assigned to transport request &1 |
| 801 | Freight agreement RFQ master template &1 not found |
| 802 | Freight agreement template &1 not found |
| 803 | Forwarding agreement template &1 not found |
| 804 | Internal agreement template &1 not found |
| 805 | Agreement template &1 archived or marked for archiving |
| 806 | Cannot change RFQ &1 with status &2 |
| 807 | Freight agreement template not created from customizing template &1 |
| 808 | Forwarding agreement template not created from customizing template &1 |
| 809 | Internal agreement template not created from customizing template &1 |
| 810 | Mutual agreement template &1 does not exist |
| 811 | Specify either an agreement template or agreement type but not both |
| 812 | Entry is too long |
| 813 | You need to specify a selection type |
| 814 | You haven't entered a threshold for canceling doc.; default value used |
| 815 | You need to enter a unit of measure for normalized quantity (UoM of NLQ) |
| 816 | You haven't entered an NLQ determination level; default level is used |
| 825 | Aggregation of different units/currencies is not possible |
| 830 | Truck resource &1 used; entered vehicle type not considered |
| 831 | Vehicle type &1 not found |
| 832 | Vehicle type &1 can't be used because its use is restricted in planning |
| 833 | Equipment type &1 is not a valid truck type. |
| 834 | Equipment type &2 is not a valid trailer type. |
| 835 | Equipment type &2 is not a valid locomotive type. |
| 836 | Equipment type &2 is not a valid railcar type. |
| 837 | Trailer resource &1 used; entered trailer type not considered |
| 838 | Locomotive resource &1 used; entered locomotive type not considered |
| 839 | Railcar resource &1 used; entered railcar type not considered |