/SCWM/DYNBIN - Messages: Flexible bin
The following messages are stored in message class /SCWM/DYNBIN: Messages: Flexible bin.
It is part of development package /SCWM/CORE in software component SCM-EWM-WOP. This development package consists of objects that can be grouped under "Core Functions of WME".
It is part of development package /SCWM/CORE in software component SCM-EWM-WOP. This development package consists of objects that can be grouped under "Core Functions of WME".
Message Nr ▲ | Message Text |
---|---|
000 | Internal error: &1 |
009 | No flexible bin area found |
010 | No matching flexible bin area found for &1/&2 |
011 | More than one matching flexible bin area found for &1/&2 |
030 | No matching pattern found for &1 |
031 | Pattern &1 failed: Check &2 for flexible bin &3 |
032 | Pattern &1: Please check pattern for flexible bin &3 |
033 | &1 - (&4) for flexible bin &2 are wrong. Check pattern &3 |
034 | Pattern check &1 failed for flexible bin &2 |
040 | Flexible bin &1 overlaps flexible bin &2 by &3% |
041 | Flexible bin &1 overlaps blocked area &2 (&3) by &4% |
042 | Storage bin/flexible bin &1 already exists |
043 | Storage bin &1/&2 is not a flexible bin (storage behavior <> 3) |
044 | Flexible bin &1 lies &2% outside of flexible storage bin area &3 |
045 | Value of field &1 must be smaller than of field &2 |
046 | &1 and &2 or &3 and &4 must be different |
047 | Invalid character &1 used for flexible bin &2 |
048 | No valid flexible bin area and pattern found for storage bin &1 |
050 | Customer specific pattern &1 not returned with all required values |
051 | BAdI &1 for customer specific pattern not implemented |
052 | BAdI &1 for customer specific pattern returns CHECK FAILED |
053 | Customer specific area &1 not returned with all required values |
070 | You are not allowed to create flexible bins in transaction /SCWM/LS01 |
071 | You cannot use storage type &1 for flexible bin creation in /SCWM/LS01 |
072 | You cannot use a flexible strg. type for strg. bin creation WH &1 Sq &2 |
100 | Pattern has a total length of &1 (maximum 18) |
101 | Error accessing function module: &1 parameter: &2 &3 &4 |
125 | Length of field &1 exceeds pattern &2 |
126 | Content of field &1 &2 does not correspond with pattern &3 |
127 | Value of field &1 &2 is bigger than of field &3 - &4 |
128 | For field &1 &2 enter UoM &3 in IMG "Def. Warehouse Number Control" |
129 | &1 is not a valid unit of weight |
130 | &1 is not a valid unit of volume |
131 | Length of flex. bin area ID &1 matches pattern &2 prefix length &3 |
132 | There are blocked cells for flexible bin area &1 and warehouse &2 |
133 | There are flexible bins for flexible bin area &1 and warehouse &2 |
134 | Flexible bin area &1 for warehouse &2 is being edited, therefore blocked |
135 | Flexible bin area &1 not allowed - already in use for ST w. behavior <> 3 |
136 | Blocked cell(s) &1 &2 outside flex. bin area range &3 to &4 |
137 | Length of &1 flex.bin area &2 doesn't match length of&3 prefix pattern &4 |
138 | Flex. bin area &1 should only contain [0..9] and [A..Z] characters |
139 | Inconsistent blocked cell &1 - Saving not possible |
140 | Inconsistent flexible bin area &1 - Saving not possible |
141 | No flexible bin area data set for flexible bin area &1 and warehouse &2 |
142 | Value of field &1 &2 is equal or bigger than of field &3 - &4 |
150 | Error generating a GUID |
151 | Error while calling function module &1 |
160 | Enter a warehouse number |
161 | No storage type entered. Set the flag or enter a storage type |
162 | Flexible bin &1 was not deleted. Open PI document must be closed first |
163 | Starting flexible bin deletion in simulation mode |
164 | Flexible bin &1 empty and deleted |
165 | Flexible bin &1 was not deleted. Open warehouse task must be closed first |
166 | Flexible bin &1 was not deleted. An error occured |
167 | Flexible bin &1 found and empty |
180 | Flexible bin not allowed for prefix &1 and storage type &2. |
181 | Prefix not correct for custom-defined flexible bin areas |
182 | Data not correctly maintained |
183 | Cell capacity must be between 1 and 10 |
184 | Blocked cells not allowed for custom-defined flexible bin patterns |
185 | Customer pattern &1 not implemented |
186 | Pattern does not match PPPP#XXXXXX#YYYYYY |
187 | Wrong pattern ID |
188 | Prefix in wrong format: 4 digits required, given: &1 |
189 | x-coordinates in wrong format: 6 digits required, given: &1 |
190 | x-start in wrong format: &1 |
191 | x-end in wrong format: &1 |
192 | y-coordinates in wrong format: 6 digits required. given: &1 |
193 | y-start in wrong format: &1 |
194 | y-end in wrong format: &1 |