/SCWM/QINSP - Quality Inspection in WM
The following messages are stored in message class /SCWM/QINSP: Quality Inspection in WM.
It is part of development package /SCWM/QINSP in software component SCM-EWM-QM. This development package consists of objects that can be grouped under "Quality Inspection in WM".
It is part of development package /SCWM/QINSP in software component SCM-EWM-QM. This development package consists of objects that can be grouped under "Quality Inspection in WM".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ********* Customizing ******************************************* |
| 001 | Inspection object type &1 is not available |
| 002 | Inspection rule group &1 does not exist in warehouse &2 |
| 003 | Quantity interval does not exist for warehouse &1 and quantity &2 &3 |
| 004 | Value interval &2 &3 does not exist for whse &1 and quality group &4 |
| 005 | Scheduling for insp. doc. creation does not exist for whse &1 action &2 |
| 006 | No inspection object versions were activated |
| 007 | Could not determine active inspection object types |
| 008 | Could not determine inspection object types for warehouse number &1 |
| 009 | Version &1 of inspection object type &2 not yet activated |
| 010 | Could not create objects |
| 011 | Search according to pattern and/or area is not yet supported |
| 012 | Could not determine follow-up action - Decision not possible |
| 013 | No defect groups were maintained for warehouse &1 |
| 014 | No inspection groups were maintained |
| 015 | QIE objects could not be created |
| 016 | Specify complete sequence of inspection object type property |
| 017 | Inspection object type version already exists and is being restored |
| 018 | Deletion only possible for rule arguments |
| 019 | Quality group &1 does not exist |
| 020 | No authorization in warehouse number &2 for activity '&1' for insp. rule |
| 021 | Handling unit inspection is not active (Customizing activation missing) |
| 022 | Inspection doc. &1 cannot be cancelled - There are open warehouse tasks |
| 023 | Handling unit insp. documents cannot be canceled / deleted |
| 024 | Defect &1 is not allowed for this object type in warehouse &2 |
| 025 | Defect group &1 not maintained in warehouse &2 |
| 026 | Inspection rule is not in change mode. Select 'Change'. |
| 027 | Quality group &1 does not correspond to quality group &2 of product &3 |
| 028 | Quantity interval is not valid without a product. Enter product |
| 029 | Inspection rule already exists with these properties |
| 030 | No authorization in whse number &2 for activity '&1' for quality level |
| 031 | Inspection document for counting was determined |
| 032 | Counting as part of quality inspection is not relevant |
| 033 | Problems occurred when determining the inspection relevance |
| 034 | Inspection procedure &1 for inspection object type &2 not valid |
| 035 | Error during display |
| 036 | Quality level already exists with these properties |
| 037 | Inspection document for Q-inspection was determined |
| 038 | Q-inspection not relevant |
| 039 | Enter unit of inspection duration |
| 040 | Dynamic modification criterium &1 requires input '&2' |
| 041 | Exclusive search is not yet supported |
| 042 | Search for these properties is not yet supported |
| 043 | Multiple active versions for inspection object &1 exist |
| 044 | Could not determine follow-up ations in warehouse &1 |
| 045 | Automatic inspection decision only for delivery header insp. documents |
| 046 | Follow-up action &2 in warehouse number &1 not maintained |
| 047 | Insp. doc. &1 contains partially-posted del. itms. Not possible to cancel |
| 048 | Follow-up action already executed for element. Not possible to cancel |
| 049 | Inspection document not yet released |
| 050 | Final putaway only possible after quality inspection - No WT created |
| 051 | Property &1 not supported for selected inspection object type |
| 052 | Mandatory propert. whs number,version and insp. proc. must not be deleted |
| 053 | Inspection rules exist! Changing properties leads to inconsistencies |
| 054 | Sample cannot be canceled as open WTs exist |
| 055 | Unable to determine a handling unit |
| 056 | Unable to determine a delivery item |
| 057 | Inspection doc. &1 includes GR posted delivery items. Unable to cancel |
| 058 | No valid version of selected inspection object type &1 exists |
| 059 | Changes to q-system/inst. infl. insp. rules for insp.obj. &2 for whse &1 |
| 060 | Cannot determine logical system for stock transport order |
| 061 | Service to create a purchasing document has been executed |
| 062 | Purchase orders were created |
| 063 | Target HU must be in same storage type. Repacking not possible |
| 064 | HU contains stocks with open product inspection |
| 065 | Warehouse number was incorrectly initialized |
| 066 | Insp. obj. type &1 vers. &2: Max. no. of insp. docs (&3) exceeded |
| 067 | Entering a whse process type is only useful for destructive samples |
| 068 | Entering sampling arguments is only useful for sampling procedures |
| 069 | Inspection object type &1, version &2: No suitable index exists |
| 070 | External validity date exceeded by &1 days |
| 071 | Internal validity date exceeded by &1 days |
| 072 | Select one inspection object type |
| 073 | Version &2 for inspection object type &1 was generated successfully |
| 074 | Inspection object type &1, version &2 does not exist |
| 075 | Item type &1 does not exist |
| 076 | Document type &1 does not exist |
| 077 | Active version for inspection object type 5 could not be determined |
| 078 | No stock could be determined or stock is already being checked |
| 079 | Element was not generated - technical error |
| 080 | Ext. storage process step &1 not permitted for Inspection Obj. Type & &2. |
| 081 | No decision codes were assigned to code group &1. |
| 082 | Target of sample (whse no. &1, work center &2) does not exist |
| 083 | Default follow-up actions for Group &1 were generated. |
| 084 | Not possible to create inspection document(s) |
| 085 | Follow-up action &1 is not allowed for blocked stock returns |
| 086 | Inspection not possible - GR has not been posted completely for quantity |
| 087 | External follow-up action not allowed due to missing ERP function |
| 088 | Stock transport order not possible |
| 089 | Deletion of char. version and warehouse number is confirmed using Cancel |
| 090 | No destination data could be determined for the quality inspection |
| 091 | No destination data could be determined for counting |
| 092 | Quality inspection: sample is not relevant for movement |
| 093 | Stock for cancelled element - inconsistency in stock |
| 094 | Step &1 storage type &2 cannot determine destination data for QM |
| 095 | Unable to determine RFC destination for QM connection; check Customizing |
| 096 | First deactivate the "old" version of inspection object type &1 |
| 097 | Partner for stock transport order not maintained |
| 098 | Partner &1 for stock transport order does not exist |
| 099 | Check is not complete; sending a result not permitted |
| 100 | Item type &1 has not been assigned to inspection object type &2 |
| 101 | The remaining Qty of a Quality Inspection with Samples is not relevant |
| 102 | Follow-up action &1 is not allowed for stock transport order |
| 103 | Warehouse task &1 refers to inspection doc. &2; not possible to cancel |
| 104 | Follow-up action &2 in warehouse &1 can be used from external Syst. only |
| 105 | Inspection of ARM return items does not allow to enter QTY differences |
| 106 | Inspection document not created |
| 107 | Error; save failed |
| 108 | Partial decisions saved successfully |
| 109 | Process (Inspection Creation / GR) is terminated due to Quality Reasons |
| 110 | Inspection Item &1 was already processed |
| 111 | Inspection Document &1 was already processed |
| 112 | System &1, Installation &2: No corresponding SAP-EWM system involved |
| 113 | EWM product ID &1: No corresponding material in EWM system &2 |
| 114 | EWM partner ID &1: No corresponding vendor in EWM system &2 |
| 115 | Exception Code &1 does not exist |
| 116 | Inspection type &1 does not exist in ERP system &2 |
| 117 | Entitled &1, EWM warehouse &2: No plant assigned in ERP system &3 |
| 118 | Option "Optimized Access" will be ignored without QIE SP10 |
| 119 | Exception code needed for the entered quantity difference |
| 120 | Check stock &1 &2 &3 &4: the fol. messages were issued during processing: |
| 121 | Stock &1 &2 &3 &4 has been processed successfully |
| 122 | Stock &1 &2 &3 &4 : only a partial quantity could be posted |
| 123 | Stock &1 &2 &3 &4 could not be posted to quality inspection |
| 124 | Stock &1 &2 &3 &4: Blocked stock can't be inspected |
| 125 | Mass creation of inspection documents IOT5 |
| 126 | No inspection rule could be determined for insp. doc. creation (&1) |
| 127 | Warehouse Number is initial |
| 128 | Can't lock stock &1 &2 &3 &4 so stock is ignored |
| 129 | Creation of inspection doc. failed for stock &1 &2 &3 &4. No stock change |
| 130 | No authorization to create inspection doc. for warehouse &1 and IOT &2 |
| 131 | No inspection rule could be found for stock &1 &2 &3 &4. No Stock Change. |
| 132 | Stock &1 &2 &3 &4: Error when releasing inspection document |
| 133 | An error occured during saving the changes. |
| 134 | Transaction failed. No mass creation has been performed. |
| 135 | No stocks found which could be inspected, no mass creation performed. |
| 136 | An error occured when reading the selected stock. |
| 137 | Check stock &1 &2 &3 &4: the following message has been issued. |
| 138 | Error in call of FM /SCWM/STOCK_CHANGE. transaction failed. |
| 139 | Stock &1 &2 &3 &4: Error when reducing lot size of inspection document |
| 140 | Fatal Error when creationg inspection documents. Transaction failed. |
| 141 | QIR: Key value ERP material is missing |
| 142 | QIR: Key value ERP vendor is missing |
| 143 | QIR: Key value ERP plant is missing |
| 144 | QIR: Key value ERP storage location is missing |
| 145 | Start: Transfer Q-Info record (QIR) data from ERP &1 to inspection rule |
| 146 | End: Transfer Q-Info record (QIR) data from ERP &1 to inspection rule |
| 147 | Q-Info record of plant &1, vendor &2, product &3 with error |
| 148 | InspRule IOT4 version &1, LGNUM &2, Vendor &3, Product &4: Creation error |
| 149 | No EWM business key found for logsys &1 |
| 150 | ERP plant &1, storage location &2 could not be mapped in EWM |
| 151 | Inspection Object Type &1 - Current version &2 invalid |
| 152 | I-Rule IOT4 version &1, LGNUM &2, Vendor &3, Product &4: Authority error |
| 153 | I-Rule IOT4 version &1, LGNUM &2, Vendor &3, Product &4: Locked |
| 154 | I-Rule IOT4 version &1, LGNUM &2, Vendor &3, Product &4: Deletion Error |
| 155 | QIR: Creating or updating inspection rules with QIR data |
| 156 | QIR: Deleting or initializing inspection rules with QIR data |
| 157 | I-Rule IOT4 version &1, LGNUM &2, Vendor &3, Product &4: Already deleted |
| 158 | General transfer error since business system &1 has not been found |
| 159 | Number of created inspection rules with QIR data: &1 |
| 160 | Number of deleted inspection rules with QIR data: &1 |
| 161 | Number of updated inspection rules with QIR data: &1 |
| 162 | Number of initialized inspection rules with QIR data: &1 |
| 163 | Number of transferred QIR records from ERP system: &1 |
| 164 | Number of inspection rules with errors: &1 |
| 165 | Number of locked inspection rules: &1 |
| 166 | Insp. Rule created/updated from QIR(ECC). Del. in EWM is not supported. |
| 167 | Presampling in production requires the inspection summary option "1" |
| 168 | Q-Info record: Queue &1 stopped due to ERP-EWM mapping error |
| 169 | Property INB_PROC of inspection object type 4 is missing |
| 170 | Error by reading customizing settings of inspection object type 4 |
| 171 | Acceptance sampling in procurement is active; 2 inspection rules |
| 172 | Acceptance sampling in procurement is inactive; 1 inspection rule |
| 173 | Quality inspection &1 created |
| 174 | Handling unit &1 created for repacking |
| 175 | Cancel the open product WT or decide the entire stock item quantity |
| 176 | Batch change not allowed; set update mode (Cust. EWM) as asynchr. process |
| 177 | Bin &1 is skipped, because of open WT exists for the bin. |
| 178 | |
| 179 | You can't reverse the goods receipt because of existing sample stock. |
| 180 | Selection contains stocks already in QM. These stocks have been ignored. |
| 181 | Not all selected stock can be processed, process stopped |
| 184 | (WPT &1) Never set posting change in storage bin (create warehouse task) |
| 185 | (WPT &1) Follow-up action needs a movement to a final bin |
| 186 | Follow-up action needs a movement to a final bin, WPT missing |
| 187 | (WPT &1) Action needs a movement to a final bin, dest. bin missing |
| 190 | Selection may process a large volume of data. Do you want to continue? |
| 200 | HU &1 could not be locked |
| 201 | Follow-up action could not be executed |
| 202 | Issue occurs when saving partial decision (check application log) |
| 203 | Error during follow-up action; See application log. |
| 204 | Functionality not supported on SAP GUI for HTML |
| 209 | Handling unit process step will be completed after saving |
| 210 | Mfg.Order &1: Mapping incomplete, plant &2, material &3 |
| 211 | Mfg.Order &1: Key value ERP material is missing |
| 212 | Mfg.Order &1: Key value ERP plant is missing |
| 213 | Mfg.Order &1: Key value ERP storage location is missing |
| 214 | Name of Business System (ERP) is missing |
| 215 | IOT4 setup is missing |
| 216 | Mfg.Order &1: EWM process is started: Cancel insp. document &2 failed |
| 217 | Mfg.Order &1: Start transfer data from ERP &2 for EWM inspection planning |
| 218 | Mfg.Order &1: Cancelling inspection document due to deletion or closing |
| 219 | Mfg.Order &1: Start Create/Update insp. doc. due to release or change |
| 220 | Mfg.Order &1: Inspection document &2 found |
| 221 | Mfg.Order &1: Inspection document &2 is cancelled |
| 222 | Mfg.Order &1: Inspection document &2 is updated |
| 223 | Mfg.Order &1: batch change after release not allow, insp.doc &2 not upd. |
| 224 | Mfg.Order &1: Inspection document &2 is created |
| 225 | Transfer of EWM messages to external log &1 not possible |
| 226 | Prod: &1/Batch: &2: no Inspection rule found (IOT &3) |
| 227 | Mfg.Order &1: Lot Size for Inspection document &2 changed to &3 &4 |
| 228 | Mfg.Order &1: Batch for Inspection document &2 is changed to &3 |
| 229 | Mfg.Order &1: Assigned Sales Order for Insp. document &2 is changed to &3 |
| 230 | Mfg.Order &1: Assign. Sales Order Itm for Insp. doc. &2 is changed to &3 |
| 231 | Mfg.Order &1: Assign. Project for Inspection Document &2 is changed to &3 |
| 232 | Prod: &1/Batch: &2: Inspection rule deactivated (IOT&3 insp. process) |
| 233 | Manuf. order &1: Presampling process not active at IOT level (whse &2) |
| 234 | Product &1/Batch &2: Insp. process deactivated by QIR (IOT &3 process) |
| 235 | Insp. type &1 not relevant for insp. rule creation (no entry in Cust.) |
| 236 | Insp. type &1 is relevant for inspection rule creation (IOT &2 Proc. &3) |
| 237 | Insp. rule already exists for material &1 (plant &2) |
| 238 | Insp. rule for matl &1/plant &2 is being deleted (insp. type inactive) |
| 239 | Insp. rule for material &1 (plant &2) is being created |
| 240 | Inspection process is mandatory for inbound inspections |
| 241 | Insp. rule for material &1 (plant &2) is being deleted |
| 242 | Insp. rule for material &1 (plant &2) does not exist |
| 243 | Inspection rule for material &1 (plant &2) is being changed |
| 244 | Error during property mapping |
| 245 | Ensure there are no inspection rules with a deleted inspection type |
| 250 | Could not read attributes for inspection document &1 |
| 251 | Inspection document &1: Decision code or follow-up action missing |
| 253 | Can't create warehouse tasks until external sample is calculated |
| 254 | Quantity of serial numbers must match the quantity in the sample size |
| 255 | No available stock found so sample size can't be increased |
| 300 | Summary not possible (insp. doc. &1 locked): new insp. doc. created |
| 301 | Stock already decided. Select products for the decision once again. |
| 302 | Document assignment not supported when ERP QM integration is active |
| 303 | At least Inpsection Lot or Inspection ID should be filled. |
| 304 | Enter Warehouse number on the "Stock and Bin" category level |
| 305 | QI document exists with INSPID &1. QI-reference is not removed from stock |
| 306 | Inspection document(s) is(are) not referenced in any stock |
| 307 | No inspection ID left for stock selection. |
| 308 | Stock contains inspection document reference. |
| 309 | QI-document &1 decision is in process. QI-doc is skipped |
| 310 | Inspection Document is processed in pending queue &1 |
| 311 | Check inspection ID &1 |
| 312 | QI-Doc. reference was removed from stock (&1,&2) |
| 313 | &1 records were updated in tables /SCWM/QUAN and /SCWM/AQUA |
| 314 | Error(s) happend during remove of INSPID. Not all records were updated. |
| 315 | Process step &1 for HU &2 must be set to completed |