PLMK - Inspection plan characteristics

Inspection plan characteristics information is stored in SAP table PLMK.
It is part of development package QP in software component QM-PT-IP. This development package consists of objects that can be grouped under "QM inspection plan characteristics".

Fields for table PLMK

Field Name	Description	Is Key	Data Element	Data Type	Length	Check Table
MANDT	Client	X	MANDT	CLNT	6
PLNTY	Task List Type	X	PLNTY	CHAR	2
PLNNR	Key for Task List Group	X	PLNNR	CHAR	16
PLNKN	Number of the Task List Node	X	PLNKN	NUMC	16
KZEINSTELL	Characteristic Type	X	QKZEINSTMK	CHAR	2
MERKNR	Inspection Characteristic Number	X	QMERKNRP	NUMC	8
GUELTIGAB	Valid-From Date		DATUV	DATS	16
SERNV	Technical status from		TECHV	CHAR	24
LOEKZ	Deletion Indicator		LKENZ	CHAR	2
PARKZ	Indicator: inactive changes		PARKZ	CHAR	2
AENDERGNR	Change Number		AENNR	CHAR	24
ERSTELLER	User who created record		ANNAM	CHAR	24
ERSTELLDAT	System Date on Which Data Record Was Created		QDATUMERST	DATS	16
AENDERER	Name of User Who Last Changed Data Record		QAENDERER	CHAR	24
AENDERDAT	System Date on Which Data Record Was Changed		QDATUMAEND	DATS	16
STEUERKZ	Cntrl Indicator String for Insp. Char./Master Insp. Char.		QMKCONTROL	CHAR	60
QMTB_WERKS	Plant for Inspection Method		Q_METH_PLANT	CHAR	8	T001W
PMETHODE	Inspection Method		QPMETHODE	CHAR	16	QMTB
PMTVERSION	Version Number of Inspection Method		QVERSNRPM	CHAR	12
QPMK_REF	Reference to Master Insp. Characteristic in Task List		QKZ_REF	CHAR	2
QPMK_ZAEHL	Plant for the Master Inspection Characteristic		QZAEHLER	CHAR	8
VERWMERKM	Master Inspection Characteristic		QMERKNR	CHAR	16	QPMK
MKVERSION	Version Number of Master Inspection Characteristic		QVERSNRMK	CHAR	12
MKVERSDAT	Key Date for Version Selection		QVERSDAT	DATS	16
MERKGEW	Weighting of Characteristic		QMERKGEW	CHAR	4	TQ17A
PROBENR	Partial Sample No. for Inspection Charac. in Task List		QPROBEPL	NUMC	6
PRUEFQUALI	Inspector Qualification		QPRQUALIF	CHAR	10	TQ11
TOLERANZSL	Tolerance Key		QTOLERANZ	CHAR	8	TQ29
KURZTEXT	Short Text for Inspection Characteristic		QTXT_CHA	CHAR	80
LTEXTKZ	Inspection Characteristic Long Text Exists		QLTEXTKZ	CHAR	2
LTEXTSPR	Language Key		SPRAS	LANG	2
LTEXTEKZ	Sample-Drawing Text Exists		QKZPRZIEH	CHAR	2
LTXTENTSPR	Language Key		SPRAS	LANG	2
STELLEN	Number of Places to the Right of a Decimal Point (Accuracy)		QSTELLEN	INT1	1
MASSEINHSW	Unit of Measurement in Which Quantitative Data Is Stored		QMASSEH	UNIT	6	T006
.INCLUDE				CHA_QUANTITAT	0
SOLLWERT	Target Value for a Quantitative Characteristic		QSOLLWERTE	FLTP	8
SOLLWNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERANZOB	Upper Specification Limit		QTOLOB	FLTP	8
TOLOBNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERANZUN	Lower Specification Limit		QTOLUN	FLTP	8
TOLUNNI	Value Not Initial if Set		QNINITIAL	CHAR	2
KLASANZAHL	Number of Value Classes for Inspection Results		QKLASSZAHL	INT1	1
KLASBREITE	Class Width		QKLASSBR	FLTP	8
KLASBRNI	Value Not Initial if Set		QNINITIAL	CHAR	2
KLASMITTE	Class Midpoint		QKLASSMIT	FLTP	8
KLASMINI	Value Not Initial if Set		QNINITIAL	CHAR	2
GRENZEOB1	First Upper Specification Limit		QGRENZOB1	FLTP	8
GRENZOB1NI	Value Not Initial if Set		QNINITIAL	CHAR	2
GRENZEUN1	First Lower Specification Limit		QGRENZUN1	FLTP	8
GRENZUN1NI	Value Not Initial if Set		QNINITIAL	CHAR	2
GRENZEOB2	Second Upper Specification Limit		QGRENZOB2	FLTP	8
GRENZOB2NI	Value Not Initial if Set		QNINITIAL	CHAR	2
GRENZEUN2	Second Lower Specification Limit		QGRENZUN2	FLTP	8
GRENZUN2NI	Value Not Initial if Set		QNINITIAL	CHAR	2
PLAUSIOBEN	Upper Plausibility Limit		QPLAUSIOB	FLTP	8
PLAUSIOBNI	Value Not Initial if Set		QNINITIAL	CHAR	2
PLAUSIUNTE	Lower Plausibility Limit		QPLAUSIUN	FLTP	8
PLAUSIUNNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERWEIOB	Change to Upper Specification Limit		QTOLWOB	FLTP	8
TOLWOBNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERWEIUN	Change to Lower Specification Limit		QTOLWUN	FLTP	8
TOLWUNNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERWAB	Date from Which the Tolerance Change Is Valid		QTOLWAB	DATS	16
TOLERWBIS	Date Until Which the Tolerance Change Is Valid		QTOLWBIS	DATS	16
STICHPRVER	Sampling Procedure in Inspection Characteristic		QSTICHVERF	CHAR	16
FAKPLANME	Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure		QUMREN	FLTP	8
FAKPROBME	Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure		QUMRENPME	FLTP	8
PROBEMGEH	Sample Unit of Measure		QPROBME	UNIT	6	T006
PRUEFEINH	Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.)		QPROBEFAK	DEC	3
DYNKRIT	String for Dynamic Modification Criteria (Database Relevant)		QDYNSTRING	CHAR	20
FORMELSL	Check and Calculate Formula in QM		QFORMELSL	CHAR	2
FORMEL1	Formula Field		QFORMEL	CHAR	120
FORMEL2	Formula Field		QFORMEL	CHAR	120
CODEGR9U	Defect Code Group for Rejection at Lower Tolerance		QCODEGRPU	CHAR	16
CODE9U	Defect Code for Rejection at Lower Specification Limit		QCODEU	CHAR	8
CODEVR9U	Version Number		QVERSNR	CHAR	12
CODEGR9O	Defect Code Group for Rejection at Upper Tolerance		QCODEGRPO	CHAR	16
CODE9O	Defect Code for Rejection at Upper Specification Limit		QCODEO	CHAR	8
CODEVR9O	Version Number		QVERSNR	CHAR	12
KATAB1	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART1	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE1	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK1	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS1	Version Number		QVERSNR	CHAR	12
AUSWDAT1	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB2	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART2	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE2	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK2	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS2	Version Number		QVERSNR	CHAR	12
AUSWDAT2	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB3	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART3	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE3	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK3	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS3	Version Number		QVERSNR	CHAR	12
AUSWDAT3	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB4	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART4	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE4	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK4	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS4	Version Number		QVERSNR	CHAR	12
AUSWDAT4	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB5	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART5	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE5	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK5	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS5	Version Number		QVERSNR	CHAR	12
AUSWDAT5	Key Date for Version Selection		QVERSDAT	DATS	16
DUMMY10	Text Line for Additional Information		QTXT10	CHAR	20
DUMMY20	Text Line for Additional Information		QTXT20	CHAR	40
DUMMY40	Text Line for Additional Information		QTXT40	CHAR	80
CHARACT_ID1	Characteristic Description for Quality Data Exchange		QCHARACT_ID1	CHAR	80
QERGDATH	Planned Results Data Origin		QERGDATHPL	CHAR	4	TQ73
EEANTVERF	Fraction Calculation		QEANTVERF	CHAR	4	TQ72
QDYNREGEL	Dynamic Modification Rule		QDYNREGEL	CHAR	6	QDDR
DYNMERKREF	Characteristic (in Plan) whose Q-Level Will Be Copied		QMERKDYN	NUMC	8
PZLFH	Assigned Test Equipment		QPZLFH	NUMC	16
CODEGRQUAL	Defect Code Group for General Rejection		QCODEGRPQL	CHAR	16
CODEQUAL	Defect Code for Rejection: General		QCODEQL	CHAR	8
SPCKRIT	SPC Criterion		QSPCKRIT	CHAR	6	QPSP
.INCLUDE				CI_PLMK	0
INPPROC	Parameters for Input Processing in QM Results Recording		QINPPROC	CHAR	6	TQ71
RES_PLAN	Response Plan		QP_RESPLAN	CHAR	6	TQPC_RESPLAN
CTRMETH	Control Method		QP_CTRMETH	CHAR	6	TQPC_CTRMETH
CHAORIG	Inspection Characteristic Origin		QP_CHAORIG	CHAR	6	TQPC_CHAORIG
CHAORIG_GUID	Reference to Characteristic That Was Adopted		QP_CHAORIG_GUID	RAW	16
NO_INSPECTION	Do Not Copy Inspection Characteristic to Inspection Lot		QP_NO_INSPECTION	CHAR	2
CHAR_RELEVANCE	Relevance of Characteristic for Inspection		QP_CHAR_RELEVANCE	CHAR	2
QP_CHAORIG_ID	Original Identification for Characteristic		QMIP_CHAORIG_ID	CHAR	80
CHARGROUP	Characteristic Group		QCHARGROUP	CHAR	20
CHARGROUP_CREF	Source Characteristic of Characteristic Group Division		QCHARGROUP_CREF	NUMC	8
DIVISIONINT	Internal Division ID		QDIVISIONINT	NUMC	8
VALID_TO_ON_DB	Valid-to date		DATUB	DATS	16
VERSN	Routing Version		PLNVERSN	CHAR	8
VERSN_SOURCE	Source Routing Version		PLNVERSN_SOURCE_VERSN	CHAR	8
VERSN_SOURCE_PLNKN	Task List Version: Number of source list node		PLNVERSN_SOURCE_PLNKN	NUMC	16
VERSN_SOURCE_MERKNR	Task List Version: Souce Inspection Characteristic Number		PLNVERSN_SOURCE_MERKNR	NUMC	8
.INCLUDE	EXT			PLMK_INCL_EEW_PS	0
DUMMY_PLMK_INCL_EEW_PS	Dummy function in length 1		DUMMY	CHAR	2