QAMV - Characteristic specifications for inspection processing

Characteristic specifications for inspection processing information is stored in SAP table QAMV.
It is part of development package QE in software component QM-IM-RR. This development package consists of objects that can be grouped under "QM results recording".

Fields for table QAMV

Field Name	Description	Is Key	Data Element	Data Type	Length	Check Table
MANDANT	Client	X	MANDT	CLNT	6	T000
PRUEFLOS	Inspection Lot Number	X	QPLOS	NUMC	24	QALS
VORGLFNR	Current Node Number from Order Counter	X	QLFNKN	NUMC	16
MERKNR	Inspection Characteristic Number	X	QMERKNRP	NUMC	8
ERSTELLER	Name of User Who Created the Data Record		QERSTELLER	CHAR	24
ERSTELLDAT	System Date on Which Data Record Was Created		QDATUMERST	DATS	16
AENDERER	Name of User Who Last Changed Data Record		QAENDERER	CHAR	24
AENDERDAT	System Date on Which Data Record Was Changed		QDATUMAEND	DATS	16
PHYSPROBE	Number of the Partial Sample		QPHYSPROBE	NUMC	12
SATZSTATUS	Specification Record Status		QSTATUS	CHAR	2	TQ76
STEUERKZ	Cntrl Indicator String for Insp. Char./Master Insp. Char.		QMKCONTROL	CHAR	60
TSTICHPRKZ	Partial Samples Possible		QTSTICHPRO	CHAR	2
NOINPUTKZ	Results Are Calculated Internally		QNOINPUT	CHAR	2
NIPLANMKKZ	Unplanned Characteristic		QNIPLANMK	CHAR	2
CHAR_RELEVANCE	Relevance of Characteristic for Inspection		QP_CHAR_RELEVANCE	CHAR	2
AKTPPKT	Use of Unplanned Characteristics (Inspection Pt. Processing)		QAKTPPKT	CHAR	2
PPKTUNGEMK	Unplanned Characteristic Was Created with this Sample No.		QPKTUNGEMK	NUMC	12	QASV
QMTB_WERKS	Plant		WERKS_D	CHAR	8	T001W
PMETHODE	Inspection Method		QPMETHODE	CHAR	16	QMTB
PMTVERSION	Version Number of Inspection Method		QVERSNRPM	CHAR	12
ATINN	Internal characteristic		ATINN	NUMC	20
ABW_CODES	Deviating Valuation of Codes		QABW_CODES	CHAR	2
QPMK_REF	Type of Master Insp. Characteristic Ref. Results Recording		QKZ_REF_EE	CHAR	2
QPMK_WERKS	Plant for the Master Inspection Characteristic		QZAEHLER	CHAR	8
VERWMERKM	Master Inspection Characteristic		QMERKNR	CHAR	16	QPMK
MKVERSION	Version Number of Master Inspection Characteristic		QVERSNRMK	CHAR	12
MERKGEW	Weighting of Characteristic		QMERKGEW	CHAR	4	TQ17A
KURZTEXT	Short Text for the Inspection Characteristic		QMKKURZTXT	CHAR	80
LTEXTKZ	Inspection Characteristic Long Text Exists		QLTEXTKZ	CHAR	2
LTEXTSPR	Language Key		SPRAS	LANG	2	T002
LTEXTEKZ	Sample-Drawing Text Exists		QKZPRZIEH	CHAR	2
LTXTENTSPR	Language Key		SPRAS	LANG	2	T002
PRUEFQUALI	Inspector Qualification		QPRQUALIF	CHAR	10	TQ11
FORMEL1	Formula Field		QFORMEL	CHAR	120
FORMEL2	Formula Field		QFORMEL	CHAR	120
DUMMY10	Text Line for Additional Information		QTXT10	CHAR	20
DUMMY20	Text Line for Additional Information		QTXT20	CHAR	40
DUMMY40	Text Line for Additional Information		QTXT40	CHAR	80
CODEGR9U	Defect Code Group for Rejection at Lower Tolerance		QCODEGRPU	CHAR	16
CODE9U	Defect Code for Rejection at Lower Specification Limit		QCODEU	CHAR	8
CODEVR9U	Version Number		QVERSNR	CHAR	12
CODEGR9O	Defect Code Group for Rejection at Upper Tolerance		QCODEGRPO	CHAR	16
CODE9O	Defect Code for Rejection at Upper Specification Limit		QCODEO	CHAR	8
CODEVR9O	Version Number		QVERSNR	CHAR	12
KATAB1	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART1	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE1	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK1	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS1	Version Number		QVERSNR	CHAR	12
AUSWDAT1	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB2	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART2	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE2	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK2	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS2	Version Number		QVERSNR	CHAR	12
AUSWDAT2	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB3	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART3	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE3	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK3	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS3	Version Number		QVERSNR	CHAR	12
AUSWDAT3	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB4	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART4	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE4	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK4	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS4	Version Number		QVERSNR	CHAR	12
AUSWDAT4	Key Date for Version Selection		QVERSDAT	DATS	16
KATAB5	Catalog Entry Is a Selected Set		QKTTAB	CHAR	2
KATALGART5	Catalog Type of Assigned Code Group or Selected Set		QKATAUSW	CHAR	2	TQ15
AUSWMENGE5	Assigned Code Group or Selected Set		QCGRAUSW	CHAR	16
AUSWMGWRK5	Plant of the Assigned Selected Set		QWERKAUSW	CHAR	8	T001W
AUSWVERS5	Version Number		QVERSNR	CHAR	12
AUSWDAT5	Key Date for Version Selection		QVERSDAT	DATS	16
STELLEN	Number of Places to the Right of a Decimal Point (Accuracy)		QSTELLEN	INT1	1
MASSEINHSW	Unit of Measurement in Which Quantitative Data Is Stored		QMASSEH	UNIT	6	T006
SOLLWERT	Target Value for a Quantitative Characteristic		QSOLLWERTE	FLTP	8
SOLLWNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERANZOB	Upper Specification Limit		QTOLOB	FLTP	8
TOLOBNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERANZUN	Lower Specification Limit		QTOLUN	FLTP	8
TOLUNNI	Value Not Initial if Set		QNINITIAL	CHAR	2
TOLERWKZ	Tolerance Change Is Active		QTOLERWKZ	CHAR	2
GRENZEOB1	First Upper Specification Limit		QGRENZOB1	FLTP	8
GRENZOB1NI	Value Not Initial if Set		QNINITIAL	CHAR	2
GRENZEUN1	First Lower Specification Limit		QGRENZUN1	FLTP	8
GRENZUN1NI	Value Not Initial if Set		QNINITIAL	CHAR	2
GRENZEOB2	Second Upper Specification Limit		QGRENZOB2	FLTP	8
GRENZOB2NI	Value Not Initial if Set		QNINITIAL	CHAR	2
GRENZEUN2	Second Lower Specification Limit		QGRENZUN2	FLTP	8
GRENZUN2NI	Value Not Initial if Set		QNINITIAL	CHAR	2
PLAUSIOBEN	Upper Plausibility Limit		QPLAUSIOB	FLTP	8
PLAUSIOBNI	Value Not Initial if Set		QNINITIAL	CHAR	2
PLAUSIUNTE	Lower Plausibility Limit		QPLAUSIUN	FLTP	8
PLAUSIUNNI	Value Not Initial if Set		QNINITIAL	CHAR	2
KLASANZAHL	Number of Value Classes for Inspection Results		QKLASSZAHL	INT1	1
KLASBREITE	Class Width		QKLASSBR	FLTP	8
KLASBRNI	Value Not Initial if Set		QNINITIAL	CHAR	2
KLASMITTE	Class Midpoint		QKLASSMIT	FLTP	8
KLASMINI	Value Not Initial if Set		QNINITIAL	CHAR	2
PRZIEHVERF	Sample-Drawing Procedure		QPRZIEHVER	CHAR	16	QPRVP
VERSION	Version No. of the Sample-Drawing Procedure		QVERSNPRZV	CHAR	12
POSNRPRZV	Item Number in Sample-Drawing Procedure		QZAEHLPRZV	NUMC	8
LOSGEBEH	Lot Container		QGEBEH	UNIT	6	T006
PROBNRPL	Highest Partial Sample No. Valid for Instruction		QPROBNRBIS	NUMC	6
STICHPRVER	Sampling Procedure in Inspection Characteristic		QSTICHVERF	CHAR	16	QDSV
FAKPLANME	Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure		QUMREN	FLTP	8
FAKPROBME	Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure		QUMRENPME	FLTP	8
ANTVERF	Fraction Calculation		QEANTVERF	CHAR	4	TQ72
BEWREGEL	Valuation Rule		QBEWERT	CHAR	4	QDFM
PROBMGFAK	Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.)		QPROBEFAK	DEC	3
PROBEMGEH	Sample Unit of Measure		QPROBME	UNIT	6	T006
SOLLSTPUMF	Sample Size that Has to Be Inspected for a Characteristic		QGESUMF	INT4	4
PRUEFUMF	Quantity to Be Inspected		QPRUEFUMF	QUAN	7
MENGENEINH	Base Unit of Measure for Sample Unit		QPROBEMGEH	UNIT	6	T006
HPZ	100% Inspection		QHPZ	CHAR	2
SOLLSTPANZ	Number of Planned Partial Samples		QSOSTPANZ	INT2	2
ANTEILKZ	Take Share Estimate into Account		QANTEILKZ	CHAR	2
RUECKMELNR	Confirmation Number for Inspection Characteristic		QRUECKNR	NUMC	16
KZEINSTELL	Characteristic Type		QKZEINSTMK	CHAR	2
QDYNREGEL	Dynamic Modification Rule		QDYNREGEL	CHAR	6	QDDR
KZDYNAUT	Time of Dynamic Modification in Inspection Lot		QDYNTIME	CHAR	2
DYNKRIT	String for Dynamic Modification Criteria (Database Relevant)		QDYNSTRING	CHAR	20
DYNMERKREF	Characteristic (in Plan) whose Q-Level Will Be Copied		QMERKDYN	NUMC	8
KZDYNR	Dynamic Modification Rule Available		QKZDYNR	CHAR	2
FORMELSL	Check and Calculate Formula in QM		QFORMELSL	CHAR	2
PZLFH	Assigned Test Equipment		QPZLFH	NUMC	16
CODEGRQUAL	Defect Code Group for General Rejection		QCODEGRPQL	CHAR	16
CODEQUAL	Defect Code for Rejection: General		QCODEQL	CHAR	8
KZRAST	Sampling Procedure for Inspection Points		QKZRAST	CHAR	2
.INCLUDE				QAPPHIST	0
RASTER	Inspection Frequency (Only for Inspection with Insp. Points)		QRASTER	NUMC	6
PPANZPRUE	Number of Insp. Point Inspections Without Characteristic		QPPANZPRUE	INT4	4
SPCKRIT	SPC Criterion		QSPCKRIT	CHAR	6	QPSP
CHARACT_ID1	Characteristic Description for Quality Data Exchange		QCHARACT_ID1	CHAR	80
QERGDATH	Planned Results Data Origin		QERGDATHPL	CHAR	4	TQ73
INPPROC	Parameters for Input Processing in QM Results Recording		QINPPROC	CHAR	6
CHAORIG	Inspection Characteristic Origin		QP_CHAORIG	CHAR	6
QP_CHAORIG_ID	Original Identification for Characteristic		QMIP_CHAORIG_ID	CHAR	80
CHARGROUP	Characteristic Group		QCHARGROUP	CHAR	20
CHARGROUP_CREF	Source Characteristic of Characteristic Group Division		QCHARGROUP_CREF	NUMC	8
DIVISIONINT	Internal Division ID		QDIVISIONINT	NUMC	8
OA_ID	Identifies an Operation Activity		MPE_OA_ID	INT8	8
OA_VERSION_NO	Number of an Operation Actiivity Version		MPE_OA_VERSION_NO	INT4	4
.INCLUDE	EXT			QAMV_INCL_EEW_PS	0
DUMMY_QAMV_INCL_EEW_PS	Dummy function in length 1		DUMMY	CHAR	2