3F - Verg�tungsmanagement
The following messages are stored in message class 3F: Verg�tungsmanagement.
It is part of development package PCMP in software component PA-CM. This development package consists of objects that can be grouped under "Compensation management".
It is part of development package PCMP in software component PA-CM. This development package consists of objects that can be grouped under "Compensation management".
Message Nr ▲ | Message Text |
|---|---|
| 000 | *** 000 - 019 Reserved for planned compensation and pay grades |
| 001 | Enter either an absolute value or a percentage for the reference salary |
| 002 | Same subtype already exists |
| 003 | Entry & & does not exist (check your entries) |
| 004 | Enter object IDs with a maximum of eight characters |
| 005 | Job & was not found |
| 006 | & is smaller than &. Only enter larger values |
| 007 | You must enter both a duration and a unit of time |
| 008 | Enter delimitation rule |
| 009 | Object &1 &2 was not found in the period from &3 to &4 |
| 010 | There is no entry in the pay scale structure for the data specified |
| 011 | There is no entry in the salary structure for the data specified |
| 012 | Relevant currency and unit of time could not be found |
| 013 | Relevant currency or unit of time could not be defined. |
| 014 | Organizational structure not definable in period &1 to &2 |
| 015 | Amount to ... is smaller than amount from ... . |
| 016 | Use the view cluster maintenance |
| 017 | Validity period lies outside the pay grade period |
| 018 | Record & & & &: Maintain unit of time |
| 019 | Application: HR-PD Client: & Infotype Planned Compensation (1005) |
| 020 | *** 021 - 059 Reserved for Compensation Administration |
| 021 | No data found for the chosen selection criteria |
| 022 | No employee that is assigned to a position was chosen |
| 023 | The distributed total amount exceeds the budget available |
| 024 | No previous record for current selection criteria |
| 025 | A subsequent record for the current selection does not exist |
| 026 | Choose an employee |
| 027 | Choose a compensation adjustment type |
| 028 | A percentage was not entered. Processing was cancelled |
| 029 | Salary lies outside the range (& - &) for this grade level |
| 030 | Sort according to position is not possible |
| 031 | Data has been saved |
| 032 | Budget &1 for adjustment type &2 has been exceeded |
| 033 | Organizational unit & does not exist |
| 034 | Sort according to new annual salary not possible |
| 035 | No budgets exceeded |
| 036 | Process & does not exist |
| 037 | Plan version '&' was set from Compensation Management |
| 038 | & is not allowed for &. No maintenance allowed |
| 039 | You cannot maintain variable compensation types |
| 040 | Specify a currency |
| 041 | Either enter an absolute amount or a percentage for the average bonus |
| 042 | Subtype & for infotype & does not exist (check your entries) |
| 043 | Organizational unit & does not exist for all of the plan year & |
| 044 | Organizational unit & does not exist in planning period & |
| 045 | & was changed by &% for all employees |
| 046 | & was modified to comply with guideline & |
| 047 | Budget for & of & was set to initial |
| 048 | Org. unit cannot be selected as there is no compensation manager |
| 049 | Budget for & was exceeded. Data was not saved. |
| 050 | Compensation component & is not permissable |
| 051 | Specify a compensation component for the adjustment type |
| 052 | Enter a numeric value for the salary level |
| 053 | Wage type & does not exist |
| 054 | Specify a compensation category for the compensation component |
| 055 | & personnel number(s) locked by another user |
| 056 | Personnel number locked by another user and therefore cannot be processed |
| 057 | No employees found for selected organizational unit |
| 058 | Column configuration could not be saved |
| 059 | Column configuration reset |
| 060 | *** 060 - 079 Reserved for planned compensation and salary structure |
| 061 | Planned compensation cannot be determined |
| 062 | Planned compensation not unique |
| 063 | The currency could not be converted |
| 064 | The unit of time could not be converted |
| 065 | Planned compensation type cannot be changed in the display modus |
| 066 | The time unit does not correspond to a valid value for this pay scale |
| 067 | Record & & & &: Time unit was set to a pay scale value |
| 068 | Inconsistent validity periods exist |
| 069 | Cannot find an organizational unit with a compensation manager |
| 070 | Processing not possible (missing authorization) |
| 071 | Lower limit of the salary range cannot be greater than the upper limit |
| 072 | You cannot enter an organizational unit for the selection 'all jobs' |
| 080 | *** 080 - 099 reserved for compensation infotypes |
| 081 | Number of shares exercised cannot exceed number of shares issued |
| 082 | Employee's country grouping and compensation area differ |
| 083 | Wage type model changed on &1 |
| 084 | You can only maintain this infotype in Compensation Administration |
| 085 | Deletion leads to inconsistencies in distributed shares |
| 086 | Could not save the data |
| 087 | Could not save the data for adjustment type &1 |
| 088 | The data for adjustment type &1 has been saved |
| 089 | The work contract &1 does not exist |
| 100 | *** 100 - 119 Reserved for compensation tables-read errors |
| 102 | Compensation adjustment type & does not exist (check entry) |
| 103 | Adjustment type & for area & does not exist (check entries) |
| 104 | Compensation area & does not exist |
| 105 | Compensation adjustment reason & does not exist |
| 106 | Guidelines for wage type & in compensation area & do not exist |
| 107 | Guidelines & for compensation area & do not exist |
| 108 | There is no eligibility rule for compensation adjustment reason & |
| 109 | Eligibility rule & for eligibility group & does not exist |
| 110 | Compensation adjustment type & is not shares |
| 111 | No compensation adjustment reasons exist at the moment |
| 112 | Compensation adjustment type & does not exist for adjustment reason & |
| 113 | Planning period &1 does not exist. Enter an existing planning period |
| 114 | No guidelines exist |
| 115 | No rounding rules exist |
| 116 | No budget information available |
| 117 | Currency &1 does not exist. Enter an existing currency |
| 118 | Please choose an infotype |
| 119 | No wage type model found for compensation area &1, adjustment type &2, &3 |
| 120 | *** 120 - 129 reserved for compensation administration |
| 121 | Personnel number &1 locked by user &2; editing not possible |
| 122 | Personnel number & could not be unlocked |
| 123 | Error while saving adjustment data (check the error list) |
| 124 | &1 personnel number(s) and &2 budget(s) locked by another user |
| 125 | Select more than one employee for mass maintenance |
| 126 | The combination planning period/processor view returned no results |
| 127 | There are no adjustment types for this error in this planning period |
| 128 | There is no entry for eligibility rule &1. Employee is not eligible |
| 129 | Guideline &1 could not be used for wage type &2 |
| 130 | *** 130 - 149 reserved for compensation administration (budgets) |
| 131 | Budget &1 could not be locked and can, therefore, not be used |
| 132 | Budget &1 could not be unlocked |
| 133 | Error which saving budget data |
| 134 | Error while saving budget data (check the error list) |
| 135 | & budget(s) locked by another user |
| 136 | Budget locked by another user. You cannot change the amount |
| 137 | Budget &1 has been exceeded |
| 138 | Budget for adjustment type & was exceeded (see error list) |
| 150 | *** 150 - 159 Reserved for master data update |
| 151 | Error determining the payroll time unit on & |
| 152 | Information on employee's compensation adjustment on & not found |
| 153 | Information on employee's basis pay on & not found |
| 154 | Information on employee's org. assignment on & not found |
| 155 | Information on employee's working time on & not found |
| 156 | Characteristics of wage type &1 on &2 not known |
| 157 | Error performing indirect wage type valuation on & |
| 158 | Enter both a day as well as a month |
| 159 | Enter date |
| 160 | *** 160 - 169 reserved for infotype 1051 (Survey Results) |
| 161 | Job indicator &1 not valid on &2 |
| 162 | Enter a job ID |
| 163 | Average bonus (percent) could not be calculated |
| 164 | Average bonus could not be calculated |
| 200 | *** 200 - 299 Reserved for Compensation Management |
| 201 | The adjustment type(s) has / have been submitted |
| 202 | & not possible as not all employees could be locked |
| 203 | The adjustment type(s) has / have been rejected |
| 204 | No compensation adjustments in status 'planned' available |
| 205 | No compensation adjustments in status 'submitted' available |
| 206 | The adjustment type(s) has / have been approved |
| 207 | The adjustment type(s) has / have been activated |
| 208 | There are no adjustment types waiting to be activated |
| 209 | Employee not eligible for compensation adjustments |
| 210 | There are no compensation adjustments with the status 'approved' |
| 211 | No compensation adjustments found with status active |
| 212 | No compensation adjustments in status 'planned' available |
| 213 | No compensation adjustments in status 'rejected' available |
| 214 | Search criteria for selection ID can not be displayed |
| 215 | You cannot edit adjustment type &1 (missing Customizing) |
| 219 | The validity of the adjustment does not match the employment period |
| 220 | The employee's capacity utilization level ("Basic Pay" infotype) is 0 |
| 221 | A new base salary cannot be negative |
| 222 | Category is not allowed for compensation component |
| 223 | Error converting time unit from &1 to &2 on &3 |
| 224 | Error converting currency from &1 to &2 on &3 |
| 225 | Indirect valuation of wage type & cannot be changed |
| 226 | Category is not allowed for variable compensation adjustment type |
| 227 | Error inserting new wage type |
| 228 | There is no weighting for the appraisal criterion & from & to & |
| 229 | EE group & EE subgroup &: Grouping for appraisal does not exist |
| 230 | Personnel subgroup grouping for appraisals does not exist |
| 231 | Country grouping in the period from & to & not found |
| 232 | No entry in table T582A for infotype & |
| 233 | No organizational assignment found in the period & to & |
| 234 | Error converting unit of time from & to & |
| 235 | First position the cursor on the valid entry |
| 236 | No personnel number matching criteria in planning period & found |
| 237 | Enter a compensation adjustment reason |
| 238 | Enter either a search string or an object ID |
| 239 | Enter the start and/or end date of the planning period |
| 240 | Appraisals for employee &1 between &2 and &3 not found |
| 241 | No currency has been specified for budget type group & on & |
| 242 | No adjustment type &1 found for adjustment reason &2 in planning period |
| 243 | Error while saving data (check the error list) |
| 244 | Error while submitting (check the error list) |
| 245 | Error while rejecting (check the error list) |
| 246 | Error while approving (check the error list) |
| 247 | Error while activating (check the error list) |
| 248 | Data was already saved |
| 249 | No relationship of & to a budget between & and & found |
| 250 | Error defining budget relationships of & between & and & |
| 251 | Choose wage type |
| 252 | Employee does not have a salary structure acc. basic pay record on & |
| 253 | Percentage for wage type &1 lies outside permitted limits of &2 to &3 % |
| 254 | Percentage for wage type &1 falls short of lower limit of &2 % |
| 255 | Percentage for wage type &1 exceeds upper limit of &3 % |
| 256 | Amount for wage type &1 lies outside permitted limits of &2 to &3 &4 |
| 257 | Amount for wage type &1 falls short of lower limit of &2 &4 |
| 258 | Amount for wage type &1 exceeds upper limit of &3 &4 |
| 259 | Number lies outside permitted limits of &2 to &3 |
| 260 | Number falls short of lower limit of &2 |
| 261 | Number exceeds upper limit of &3 |
| 262 | Errors occurred (check the error list) |
| 263 | A budget type has not been assigned to the adjustment type & |
| 264 | No budget found for adjustment type &1 in the period &2 to &3 |
| 265 | Enter a valid processor view |
| 266 | No calculation base found for adjustment(s) of adjustment type &1 |
| 267 | The adjustments were adapted according to the guidelines |
| 268 | Percentage increase was carried out |
| 269 | The effective date for adjustment type &1 must lie between &2 and &3 |
| 270 | The amounts for adjustment type & were rounded acc. to the rounding rules |
| 271 | The rounding rules did not alter the amounts for adjustment type & |
| 272 | At least on of the wage types for adjustment type & could not be rounded |
| 273 | No rounding rules found for the wage types belonging to adjustment type & |
| 274 | No compensation adjustments found for the adjustment type & |
| 275 | On &1 a record for the same adjustment type became effective for &2 |
| 276 | Enter a valid compensation plan period |
| 277 | The percentage increase did not cause any changes |
| 278 | Action not possible (no planned compensation adjustments found) |
| 279 | Appraisal model & is not used in a matrix dimension |
| 280 | Appraisal model & is not used in a matrix |
| 281 | Appraisal model & is not used in a guideline |
| 282 | Appraisal model & is not used in a compensation wage type |
| 283 | Appraisal model & is not used in an adjustment |
| 284 | Appraisal model & is not used in an adjustment reason |
| 285 | Active plan version &1 does not correspond to comp. plan version &2 |
| 286 | It is not possible to change the amount/percentage for wage type &1 |
| 287 | &1 is locked by another user; action is not possible |
| 288 | Budget &1 is locked; action not possible for &2 on &3 |
| 289 | Warnings occurred (check the error list) |
| 290 | Information created (check the error list) |
| 291 | Deleting compensation adjustments can create budget inconsistencies |
| 292 | No suitable application found |
| 293 | Error while deleting compensation adjustment (see error list) |
| 294 | Compensation adjustment was deleted |
| 295 | The adjustment was deleted, and a new 'planned' adjustment created |
| 296 | Adjustment was deleted, employees not permitted for new adjustment |
| 297 | Budget type &2, assigned to compensation type &1, does not exist |
| 298 | No valid planning period could be determined |
| 299 | No adjustment reason/adjustment type could be determined |
| 300 | *** 300 - 319 Reserved for user exits |
| 301 | User exit: No compensation area assigned |
| 302 | Error in user exit for compensation management guidelines |
| 303 | Error in user exit for compensation management effective date |
| 304 | Error in user exit for compensation management eligibility |
| 305 | Error in user exit for calculation variants for guidelines |
| 306 | Error in user exit for calculation base in Compensation Management |
| 307 | Error in user exit for activating |
| 320 | *** 320 - 340 reserved for RHSOLO00 |
| 321 | Account assignment feature defined for object unit &1 is not unique |
| 322 | Combination personnel area &1 and personnel subarea &2 does not exist |
| 323 | No entry found for currency &1 and exchange rate &2 |
| 324 | Time unit &1 does not exist |
| 325 | (&3) An error occurred during currency conversion |
| 326 | (&3) An error occurred during time conversion |
| 327 | (&3) You cannot assign a planned compensation via the job |
| 350 | *** 350-399 reserved for pay scale reclassification and increases |
| 351 | Not enough space available for new wage types |
| 352 | Amount field for wage type & cannot be overwritten (no direct valuation) |
| 353 | Fixed wage type & (T539A) in line w. amt field that cannot be overwritten |
| 354 | The calculated reclassification date & is not permissable |
| 355 | The currency for the new basic pay record could not be calculated |
| 356 | Indirectly valuated WTypes not allowed with foreign currency in IT0008 |
| 357 | Error while converting currency in new basic pay record |
| 358 | IT rec. 0008 (&2 - &3): Reassignment to wage level date &1 not permitted |
| 359 | IT record 0008 (&1): End level according to table T510_PSRCL reached |
| 400 | ****Reserved for Guidelines |
| 401 | Deletion not possible |
| 402 | Matrix ID already exists |
| 403 | Specify a unit |
| 404 | Start date is later than end date |
| 405 | No lines chosen |
| 406 | Upper limit is less than lower limit |
| 407 | The same dimension can only be used once in a matrix |
| 408 | Dimension & does not exist (check your entries) |
| 409 | Specify dimension 1 |
| 410 | Specify dimension 2 |
| 411 | There is no matrix data |
| 412 | A compensation area was not specified |
| 413 | Error updating matrix data |
| 414 | Error updating matrix text |
| 415 | Error updating matrix segments |
| 416 | Dimension & does not have any segments |
| 417 | Error updating matrix values |
| 418 | Error deleting matrix values |
| 419 | Error deleting matrix dimension |
| 420 | Error deleting texts for matrix dimensions |
| 421 | Error delimiting existing matrix values |
| 422 | Entry with identical key already exists |
| 423 | You can only copy matrices |
| 424 | Pers.no.&: There is no entry in the segment table for calculated specif. |
| 425 | Pers.no.&: Error calculating specifications for diimension & |
| 426 | There is no guideline value for & for the segment combination & - & - & |
| 427 | There is no Basic Pay record in the period from & to & |
| 428 | Error reading pay grade levels and/or pay grades for basic pay on & |
| 429 | Error calculating annual salary for personnel number & |
| 430 | Incorrect calculation rule for calculating length of service |
| 431 | Error calculating length of service for personnel number & |
| 432 | There is neither a technical DoB nor a DoB from infotype 0002 for & |
| 433 | Correct the date |
| 434 | No appraisals for appraisal model &1 found on &2 |
| 435 | No appraisal results for model &1 found in &2 |
| 436 | No maintenance authorization. You can only display |
| 437 | Data is locked by user & (function not possible) |
| 438 | Choose a matrix |
| 439 | No authorization for table & |
| 440 | Error deleting matrix & |
| 441 | Error deleting texts for matrix & |
| 442 | You are not allowed to transport from this client |
| 443 | Error when creating change request/task |
| 444 | Error including matrix & in the change request |
| 445 | There is no F4 help available for this dimension |
| 446 | You have not maintained a function module for method & |
| 447 | Use the cursor to choose a matrix dimension |
| 448 | Matrix values were saved |
| 449 | Matrix values have already been saved |
| 450 | Application of guidelines did not create any changes |
| 451 | No guidelines for adjustment type &1 found for the employee |
| 452 | No entry values selected. Matrix value maintenance not possible |
| 453 | No authorization to transport |
| 470 | *** 470-499 reserved for conversion reports |
| 471 | Table T71E0, key &1: Enter matrix |
| 472 | Contradictory entries defined |
| 473 | No data found in table T71CA for entry &2 in &1 |
| 474 | Check existing entries for & in T71CA |
| 500 | *** 500-549 reserved for Job Pricing |
| 501 | You are not authorized to maintain grades |
| 502 | The salary structure is currently locked |
| 503 | No jobs were selected |
| 504 | Salary structure was changed |
| 505 | Choose at least one amount type |
| 506 | Specify a rounding type |
| 507 | Specify amount |
| 508 | Specify a percentage |
| 509 | Error outputting list |
| 510 | Error in data selection |
| 511 | Data could not be saved |
| 512 | Specify degree of exactness |
| 513 | Enter a valid organizational unit |
| 550 | *** 550-599 reserved for eligibility |
| 551 | Pay grade rule & not found for salary structure & |
| 552 | Pay scale rule & not found for pay scale structure & |
| 553 | Job rule & not found |
| 554 | Salary rule & not found |
| 555 | Employee performance rule & not found |
| 556 | Pay grade area for salary structure & could not be defined |
| 600 | *** 600-619 reserved for salary survey |
| 601 | The XML document has no root nodes |
| 602 | Tag &1 required in the XML interface does not exist |
| 603 | Tag &1 specified in the XML interface occurs too often |
| 604 | XML tag &1 must contain something but is empty |
| 605 | No benchmark jobs could be selected |
| 606 | The object name of the benchmark job could not be read |
| 607 | There are no links to survey providers available. |
| 608 | Error log could not be generated for XML interface. |
| 609 | Error have occurred in the XML interface. |
| 610 | No valid currency was entered in the XML interface |
| 611 | Error reading object type of job. |
| 612 | There are no survey providers in the system. |
| 613 | Assign a survey type to the survey providers. |
| 614 | Please check the survey type which has been assigned. |
| 615 | In tag &1 the permitted length has been exceeded |
| 616 | Only enter a bonus or a fixed bonus and a variable bonus |
| 617 | The survey results could not be changed. |
| 618 | Please select a benchmark job |
| 619 | There is no long text for the link entered. |
| 620 | No basic salary could be established for employee &1. |
| 621 | No annual salary could be established for employee &1. |
| 622 | A web address for link &1 was not found. |
| 625 | *** 625 to 799 reserved for budgeting |
| 690 | A negative overall budget for budget unit &1 is not allowed |
| 691 | The variant &1 does not exist for program &2 |
| 692 | The data source &1 does not exist for the budget type group &2 |
| 693 | Budget unit &1 &2 was transferred |
| 694 | You cannot change status as budget(s) locked by another user |
| 695 | This function is not allowed for persons |
| 696 | You cannot change the status because budgets have already been claimed |
| 697 | Status change not possible, as budget struc. has already been extended |
| 698 | There are no budget units without a financing relationship |
| 699 | No corresponding budgets found that were released in period & |
| 700 | There are no errors in the organizational structure |
| 701 | A budget structure with the root unit & & was successfully created |
| 702 | Budget status & does not exist for budget type group & |
| 703 | Organizational unit & & does not exist |
| 704 | Budget structure selected has not been released yet |
| 705 | The validity could not be extended |
| 706 | The budget structure selected could not be locked |
| 707 | Validity of the budget structure or parts of it is already extended |
| 708 | The validity of the budget structure selected was successfully extended |
| 709 | There is a gap between budget period &1 and period &2 |
| 710 | One of the budget periods specified does not exist |
| 711 | The budget that has just been created could not be displayed |
| 712 | You are not authorized to display/change the new budget |
| 713 | The budget units selected were successfully deleted/delimited |
| 714 | The budgets could not be deleted (dependent budgets exist) |
| 715 | There is already a relationship for the financed unit &1 &2 |
| 716 | The financed unit & & is not valid in budget period & |
| 717 | This budget type is not disposable |
| 718 | Set either the monetary or currency budget indicator for the budget type |
| 719 | The budget unit is not allowed for budget type group &1 |
| 720 | No budget type indicator stored in the customizing settings |
| 721 | The name of the budget unit could not be changed |
| 722 | An error occurred when changing the budget values |
| 723 | The relationship with object & & was successfully deleted in period & |
| 724 | The financed unit & & was successfully assigned |
| 725 | The budget unit & & was successfully deleted/delimited |
| 726 | The budget unit & & was successfully assigned |
| 727 | The budget types are incompatible |
| 728 | The budget structure no longer exists in budget period & |
| 729 | The object data could not be read |
| 730 | The relationship with the budget unit & & already exists |
| 731 | The customizing table entries for budget unit & & were changed. |
| 732 | This function can only be used for financed units |
| 733 | Enter a budget period |
| 734 | Plan version & was set |
| 735 | An overflow has occurred (budget value is too big) |
| 736 | One of the currencies you are using does not exist |
| 737 | An error was triggered in the customer exit module |
| 738 | This function can only be used for budget units |
| 739 | The currency data required to change the budget values is missing |
| 740 | You cannot not enter quantities for monetary budgets |
| 741 | You cannot enter currency amounts for quantity budget types |
| 742 | Due to budget type &1, this budget cannot be disposed |
| 743 | Budget has the status "planned" |
| 744 | Budget falls short of required amount and exceeds available amount |
| 745 | An error occurred when saving the budget structure |
| 746 | Budget structure was successfully copied |
| 747 | Object & & does not exist in budget period & |
| 748 | An error occurred when creating the budget units |
| 749 | An error occurred when creating the relationship(s) |
| 750 | Could not find active plan version |
| 751 | You cannot use this function for the root budget unit |
| 752 | Budget unit & & does not exist |
| 753 | The action could not be executed |
| 754 | The status could not be changed |
| 755 | The assignment could not be carried out |
| 756 | Could not find plan version & |
| 757 | Could not find budget type group & |
| 758 | Enter a plan version |
| 759 | Enter a budget type |
| 760 | Budget period &1 could not be found for budget type group &2 |
| 761 | Enter either the object's abbreviation or the object's name |
| 762 | Enter either a search string or an object ID |
| 763 | Budget unit & & is not compatible with budget type group & |
| 764 | Budget unit & & has the budget type & and not & |
| 765 | Enter an object ID that is a maximum of eight characters |
| 766 | The corresponding object could not be found in budget period & |
| 767 | An error occurred calling up F4 help |
| 768 | The budget unit data could not be checked |
| 769 | No budget currency stored in the customizing settings |
| 770 | Budget type group &1 and/or budget type &2 not allowed |
| 771 | Start and/or end date not allowed |
| 772 | The budget unit could not be created |
| 773 | There is an error in the budget structure |
| 774 | There is an error in the evaluation path |
| 775 | Could not find any budget data |
| 776 | There is no name for budget type &1 of budget type group &2 |
| 777 | An error occurred when formatting the budget structure data |
| 778 | An error occurred when displaying the budget structure |
| 779 | No entry selected |
| 780 | Could not find the root budget unit |
| 781 | Copying could not be executed |
| 782 | First select the sub-tree that you want to move |
| 783 | Prior to reassigning, position your cursor on the target budget |
| 784 | The budget structure cannot be displayed |
| 785 | Budget unit & & was successfully created |
| 786 | Selecting is not allowed for this function |
| 787 | Error found (inconsistent budgets exist) |
| 788 | No errors (selected budget and all subordinate budgets are consistent) |
| 789 | Budget has been released (you cannot edit a budget that has this status) |
| 790 | Multiple selection is not possible for this function |
| 791 | You cannot use this function for the current budget status |
| 792 | You can only use this function for complete budget structures |
| 793 | Available budget was exceeded |
| 794 | Budget falls short of required amount/quantity |
| 795 | Total budget cannot be negative |
| 796 | Subtree was reassigned successfully |
| 797 | Budget unit & & is already being used |
| 798 | Budget & & cannot be deleted (dependent budgets exist) |
| 799 | You are not authorized to execute this function |
| 800 | Plan scenario & & & & does not exist |
| 801 | Scenario group & & & & does not exist |
| 802 | Plan scenario &1 &2 &3 &4 has already been released |
| 803 | Currency & has not been maintained in table TCURC |
| 804 | You are not authorized to execute this activity |
| 805 | Exchange rate type & has not been maintained in table TCURV |
| 806 | Text for plan scenario &1 has been changed to a new entry |
| 807 | No authorization for scenario group &1 &2 &3 &4 |
| 808 | Object/entry &1 cannot be deleted |
| 809 | Calc. inactive: values for scenario gr. &1 &2 &3 &4 are not up-to-date |
| 810 | Calcultion inactive: View &1 cannot be changed |
| 811 | Plan already released: Calculation must remain active |
| 812 | Scenario group &1 &2 &3 &4 already saved |
| 813 | The view 'Cost Objects' was changed to 'Individual Objects' |
| 814 | No valid entry has been chosen |
| 815 | Could not start graphics |
| 816 | Cost item &1 does not exist in the period of time selected |
| 817 | Cost object &1 &2 &3 already exists |
| 818 | Function '&1' was cancelled |
| 819 | No data exists in the period chosen |
| 820 | The time unit &1 has not been maintained in table T546T or T777L |
| 821 | No &1 chosen |
| 822 | No scenario group(s) found |
| 823 | View cannot be chosen as there are no cost objects |
| 824 | No data available |
| 825 | Cost items were changed successfully |
| 826 | Specify a valid cost object |
| 827 | Object &1 &2 '&3' only available in the reference plan |
| 828 | Calculation for scenario &1 &2 &3 &4 was started in the background |
| 829 | Error starting the background processing for scenario &1 &2 &3 &4 |
| 830 | Wage element &1 does not exist in the period from &2 to &3 |
| 831 | Cost ojbect &1 &2 '&3' was copied from the reference plan |
| 832 | Cost object &1 &2 '&3' was transferred from the reference plan |
| 833 | Cost object &1 &2 '&3' already exists in the current plan |
| 834 | Object type &1 is not supported in the standard system |
| 835 | Repeat save so that the system can recalculate the scenarios |
| 836 | No controlling area/financial year selected |
| 837 | frror assigning controlling area &1 to plan scenario |
| 838 | Data transfer to accounting was started in the background |
| 839 | Controlling area &1 does not exist |
| 840 | The CO system could not be determined in the ALE customizing |
| 841 | Controlling area &1: CO periods could not be determined |
| 842 | There are no CO plan sources defined in HR customizing |
| 843 | Plan scenario &1 &2 &3 &4 is not released |
| 844 | The CO system has release &1 |
| 845 | The plan scenario &1 &2 &3 &4 does not have any data to transfer |
| 846 | Cost assignment to periods could not be carried out |
| 847 | Data for the financial year &1 was transferred successfully |
| 848 | Data for financial year &1 was cancelled successfully |
| 849 | Test run was successful |
| 850 | The wage element &4 that was used no longer exists for cost object &3 |
| 851 | An error occurred in the ALV interface |
| 852 | Customer exit for employee &3 (&1) is returning an error |
| 853 | Customer exit for employee &3 (&1) has inconsistent data |
| 854 | No cost data has been maintained for basic pay for cost object &3 (&1) |
| 855 | No cost data from payroll exists for cost object &3 (&1) |
| 856 | No cost data for projected pay exists for cost object &3 (&1) |
| 857 | Either select one line or no lines |
| 858 | Select the line that you want to process |
| 859 | Data transfer for controlling area &1 has already been executed |
| 860 | Scenario group &1: No account assignment object planned |
| 861 | Scenario group &1: Cost element &2 of cost item &3 not defined |
| 862 | Organizational unit &1 &2 are used in several scenario groups |
| 863 | Controlling area &1: Financial year could not be determined |
| 864 | Plan scenario &1 &2 &3 &4 inconsistent - has not been released |
| 865 | Plan scenario &1 &2 &3 &4 was released for Controlling |
| 866 | Plan scenario &1 &2 &3 &4 is consistent and can be released |
| 867 | Plan scenario &1 &2 &3 &4 is inconsistent |
| 868 | There are no postable account assignment objects in IT0027 |
| 869 | User &1 is already editing the scenario group |
| 870 | User &1 is already editing the plan scenario |
| 871 | Scenario groups &1 &2 &3 &4 were deleted |
| 872 | Scenario groups &1 &2 &3 &4 could not be deleted |
| 873 | &1 is necessary for Personnel Cost Planning |
| 874 | You are not authorized to maintain Customizing |
| 875 | It is currently not possible to lock object & |
| 876 | Update error: data not saved |
| 877 | It is not possible to unlock object &1 at the moment |
| 878 | Automatic transport connection is not active -> no transport |
| 879 | Required positions for organizational unit &3 (&1) could not be read |
| 880 | Error log entry could not be created for object (&1) &2. |
| 881 | The ALE filter objects of method &2 for object &1 contain errors |
| 882 | Error in ALE recipient determination for method &2 of object &1 |
| 883 | There are multiple ALE recipient systems for method &2 of object &1 |
| 884 | The RFC destination for the method &2 of object &1 is not maintained |
| 885 | The valid data record is hidden by the screen variant |
| 888 | & & & & |