CNV_00001 - Message class for CWB settings maintenance programs
The following messages are stored in message class CNV_00001: Message class for CWB settings maintenance programs.
It is part of development package CNV_BASIS in software component CA-DT-CNV. This development package consists of objects that can be grouped under "Conversion: Basis functions".
It is part of development package CNV_BASIS in software component CA-DT-CNV. This development package consists of objects that can be grouped under "Conversion: Basis functions".
Message Nr ▲ | Message Text |
|---|---|
| 000 | Messages 001-099 - reserved |
| 001 | & & & & |
| 002 | Failed to create logger instance |
| 003 | "No temporary duplicates" flag set for table &1. |
| 004 | Table &1, field &2: check of the flag "No temporary duplicates" failed |
| 005 | Program &1 is already running |
| 060 | Changes discarded. |
| 100 | Messages 101-199 - tables and fields settings |
| 101 | Duplicate handling type not specified, although key field is converted |
| 102 | Duplicate handling not needed because no key field is converted |
| 103 | Suming all CURR and QUAN fields chosen, although table has no such fields |
| 104 | Routine for custom priority duplicate handling not defined |
| 105 | &3 &2 for &4 not found in supplied includes for table &1 |
| 106 | No fields to be converted |
| 107 | No fields chosen for aggregation |
| 108 | Conversion routine not defined for field &2 of table &1 |
| 109 | Custom aggregate routine not defined for field &2 of table &1 |
| 110 | See the message(s) for the erroneous field(s) |
| 111 | Include &1 was not found in the includes for table &2 |
| 120 | Table &1 is not included in package &2. |
| 121 | Configuration of table &1 is not allowed due to priority dupl. handling. |
| 122 | Table &1 is included in package &2. |
| 125 | Multiple priority routines defined for table &1; see long text. |
| 140 | This activity can only be performed for a selected table in Ext. Monitor |
| 150 | No new conversion-relevant fields found for package &1 |
| 151 | Search results for table &1 |
| 152 | Conversion-relevant field &2 found in table &1 |
| 153 | Conversion routine &3 assigned to field &2 of table &1 |
| 154 | No conversion routine could be assigned to field &2 of table &1 |
| 155 | Field &4 used as parameter &3 of routine for field &2 of table &1 |
| 156 | Empty tables: |
| 157 | Empty fields: |
| 158 | Assigned conversion routines: |
| 160 | Results of settings check for table &1 |
| 161 | Method &1 has more than one exporting parameter |
| 162 | To check the data the changes need to be saved |
| 163 | Entry &1 required in table CNVTABLES |
| 164 | &1 records were transfered to table &2 |
| 165 | Parameter/field &1 is type compatible with parameter/field &2 |
| 166 | Parameter/field &1 and field &2 have a different number of characters |
| 167 | Parameter &1 used multiple times |
| 168 | Program error |
| 169 | Method parameter &1 is assigned to target table field &2 |
| 170 | Field 'Source Table' is empty |
| 171 | Field 'Source Field' is empty |
| 172 | Field &1 does not exist in table &2 |
| 173 | Fill in all required fields |
| 174 | Indentical entry for source and target table |
| 175 | Class &1 does not exist |
| 176 | Method &2 does not exist in class &1 |
| 177 | Class is missing |
| 178 | Class &1 does not contains any static method |
| 179 | Parameter &1 does not exist in method &2 of class &3 |
| 180 | Select only one line |
| 181 | Without a method only one line is expected |
| 182 | Without a method the 'Parameter Name' needs to be initial |
| 183 | Parameter &1 not assigned |
| 184 | Method is missing |
| 185 | Source table &1 target table &2 |
| 186 | Target Parameter &1 method &2 |
| 187 | Method parameter &1 is not assigned to a source table field |
| 188 | Method parameter &1 is assigned to source table field &2 |
| 189 | Enter a method name or delete the class name for target parameter &1 |
| 190 | Enter a class name or delete the method name for target parameter &1 |
| 191 | You need to specify a source field for target field &1 |
| 192 | You can assign only one source field to the target field &1 |
| 193 | Target Parameter &1 |
| 194 | Source Parameter &1 |
| 195 | Parameters used multiple times |
| 196 | Parameter/field &1 can not be mapped to parameter/field &2 |
| 197 | Method &1 has no exporting parameter |
| 198 | Parameter Mapping |
| 199 | Parameter mapping DDIC |
| 200 | Critical error in field mapping |
| 201 | Priority routine defined for table &1 although priority scenario not used |
| 202 | Table &1 already excluded |
| 203 | &1 has neither type C, P nor T (probably structure). |
| 204 | Table &1 does not exist in the execution system. |
| 205 | Table &1 is not consistently defined in the ABAP Dictionary. |
| 206 | Table &1 was found in the ABAP Dict. but it doesn't exist in the database |
| 207 | For table &1 "Sum" chosen as duplicate handling. No fields to sum up. |
| 208 | Duplicate handling was set to 'Ignore duplicate entries' for table &1 |
| 209 | "Priority" flag is set for more than one field of table &1. |
| 210 | Irrelevant "Priority" flag set for one of the fields of table &1. |
| 211 | Priority routine defined for table &1 although priority handling not used |
| 212 | For table &1 both "Copy" flag and "No temporary duplicates" flag set. |
| 213 | "No temporary duplicates" flag deleted for table &1. |
| 214 | Field &2 of table &1 does not exist. |
| 215 | Conversion routine &3 for field &2 of table &1 is invalid. |
| 216 | Conversion routine for field &2 of table &1 was not defined. |
| 217 | Type of conversion routine not specified for field &2 of table &1. |
| 218 | The program name specified for field &2 of table &1 is invalid. |
| 219 | Field &2 of table &1 marked with "Priority" flag but excluded from conv. |
| 220 | Incorrect number of param. of routine &3 defined for field &2 of table &1 |
| 221 | Field &3 chosen to be parameter value of routine &2 (&1) does not exist. |
| 222 | In table &1 all fields are excluded; table ignored |
| 223 | In table &1 all fields are excluded or read-only; table ignored. |
| 224 | Table &1 excluded from conversion. |
| 225 | Field &2 of table &1 excluded from conversion. |
| 226 | Parameters of conversion routine for field &2 of table &1 are obsolete. |
| 227 | For table &1 duplicate handling method should be set to 'Ignoring dupl.' |
| 228 | Conversion routine &1 (&2-&3) was not found in the table includes. |
| 229 | Source package not defined for field &1 of table &2. |
| 230 | Package &1 cannot be used as source package for field &3 of table &2. |
| 231 | Package &1 defined as source for field &3 of table &2 doesn't exist. |
| 232 | In table &1 all fields are marked as read-only; table ignored. |
| 233 | Table &1 was included in conversion. |
| 234 | Table &1 should be included in conversion. |
| 235 | Table &1 found in CNV_EMP_CHK_EXCL; content check will not be performed. |
| 236 | Table &1 is a cluster table; content check will not be performed. |
| 237 | Table &1 is empty |
| 238 | Further checks will not be performed. |
| 239 | Table &1 takes part in conversion. |
| 240 | Table &1 cannot be used as dependent for table &2. |
| 241 | The description cannot be empty. |
| 244 | Priority flag is not allowed (field &1 of table &2) |
| 245 | Aggregation type specified for non-aggregated field &1 of table &2 |
| 246 | More than one priority routine defined for table &1 |
| 247 | Priority routine &2 of table &1 undefined |
| 248 | Illegal type '&3' of priority routine &2 for table &1 |
| 250 | Check for table &1 not yet performed |
| 251 | Warning(s) in settings for table &1 |
| 252 | Error(s) in settings for table &1 |
| 253 | Source table &1 is different to target table &2 |
| 254 | Source table &1 equals target table &2. Self mapping is not supported |
| 255 | Table &1 field &2 is not filled by the field mapping of table &3 |
| 256 | All fields of table &1 are filled by the field mapping of table &2 |
| 257 | Target field &1 is mapped by multiple field mappings of source table &1 |
| 258 | No target field is mapped by multiple field mappings of source table &1 |
| 259 | Duplicate processing type for table &1 is maintained |
| 260 | Target table &1 converted before source table &2 |
| 261 | Target table &1 converted after source table &2 |
| 262 | Target table &1 might be converted in parallel to source table &2 |
| 263 | Source table &1 is mapped to multiple target tables. |
| 264 | All source tables are mapped to exactly one target table |
| 265 | Table &1 field &2 is not transfered by the field mapping of table &3 |
| 266 | Table &1 field assignment |
| 267 | CNVORDER record created for source table &1 und target table &2 |
| 268 | Table &1 must be converted before table &2 is converted |
| 301 | value of &1 changed from '&2' to '&3'. |
| 302 | &4: value of &1 changed from '&2' to '&3'. |
| 303 | Object was deleted. |
| 304 | &4: object deleted. |
| 305 | New object was added. |
| 306 | &4: object added. |
| 307 | Changes made to table &1 settings were saved. |
| 308 | Settings for table &1 are technically correct. |
| 309 | Status of table &1 was not checked. |
| 310 | Status of table &1 is &2. Following problems were reported: |
| 311 | Status of settings for table &1 is &2. See next messages for details. |
| 312 | Field &1 cannot be aggregated (either key field or wrong data type) |
| 313 | Settings for some tables were not yet maintained. |
| 314 | There are no new tables that need to be configured |
| 315 | Table does not exist or is not relevant for conversion |
| 316 | Changes were discarded. |
| 317 | Settings for this table are already on the list. |
| 318 | You cannot delete the default entry |
| 320 | Data saved |
| 321 | No saved tables found |
| 322 | Package: &1 Select tables for reload |
| 330 | No data found with the specified log ID. |
| 340 | Follwing conversion runtime settings are used: |
| 341 | Default settings |
| 342 | Settings for table &1 |
| 343 | Number of work processes running in parallel: &1 |
| 344 | Size of a cluster block: &1 bytes |
| 345 | Database commit every &1 bytes |
| 346 | Number of parallel update jobs for a table: &1 |
| 347 | Max. number of running tasks for a table: &1 |
| 348 | Parallel update jobs if there are more than &1 cluster blocks |
| 349 | Delete data from cluster after conversion: &1 |
| 350 | Table CNV_00001_FDOMS is obsolete; see long text |
| 351 | Maintain table CNV_00001_PDOMS for priority and aggregate routines only |
| 501 | Download unsuccessful |
| 502 | File &1 successfully downloaded. |
| 503 | Upload unsuccessful |
| 504 | Table &1 was not found |
| 505 | Saving in database unsuccessful |
| 506 | Data was successfully saved in the database |
| 507 | System error occured |
| 508 | Object &1 locked by user &2. Only display possible. |
| 509 | &1 is a standard table. Adding standard table to conversion is forbidden. |
| 510 | Table &1 is already inlucded in the package &2. |
| 511 | Table &1 is not included in the package &2. |
| 512 | Report or include &1 not found in repository |
| 513 | Parameter values are only allowed for user defined parameters |
| 514 | User defined parameter &1 has no value assigned |
| 515 | Check transport request error |
| 516 | Inserting objects into transport request failed. |
| 517 | Failed to save table status. |
| 518 | &1 is a standard table. Settings maintenance not allowed. See long text. |
| 519 | Table &1 was not added manually; set the 'Exclude' flag instead. |
| 520 | Table &1 is read-only. |
| 521 | Field &1 was not added manually; set the 'Exclude' flag instead. |
| 522 | Some data has been changed. First save the data, then download tables. |
| 523 | No data to download. |
| 524 | &1 bytes saved. |
| 525 | Download failed |
| 526 | Package &1 or phase &2 not active. Only display possible. |
| 527 | Selection restriction is not allowed with drop/insert technique. |
| 528 | Data locked by another user. |
| 529 | Structure &1 not found in DDIC |
| 530 | Function module &1 does not exist. |
| 531 | Program &1 does not exist. |
| 532 | Select at least one line |
| 533 | System error. Postprocessing function module & not found. |
| 534 | Data contained in the file is not suitable for this package. |
| 535 | Mapping data was loaded from 000 client |
| 536 | System error: no preprocessing function module found. Contact SAP support |
| 537 | Configuration data (id=&) uploaded successfully |
| 538 | Failed to save data in the database |
| 540 | Problems with RFC connection |
| 541 | Phase of package &1 could not be changed to &2 |
| 542 | No data to restore table &1 could be found. |
| 543 | Too many generated recovery programs for table &1 |
| 544 | Error(s) during creation of recovery programs. See conversion monitor. |
| 545 | Warning(s) during creation of recovery programs. See conversion monitor. |
| 546 | Recovery not supported due to selection partitioning. |
| 547 | Recovery job for table &1 will be started. See long text. |
| 548 | There are running jobs for table &1; Recovery not possible |
| 550 | Failed to initialize GUI controls |
| 551 | Failed to dynamically create an internal table |
| 552 | Incorrect active package or phase. Only display possible. |
| 560 | Added the selected data to table set |
| 561 | No data selected |
| 570 | No table selected; action cancelled. |
| 580 | The system needs to prepare some data; choose Ok to continue |
| 601 | Choose a valid routine. |
| 602 | No suitable conversion routine was found for field &2 of table &1 |
| 603 | No suitable priority routine was found for table &1; choose manually |
| 604 | No technically suitable conversion routine found; see long text |
| 605 | No technically suitable conversion routine found; see long text |
| 606 | No technically suitable aggregate routine found; see long text |
| 607 | No technically suitable aggregate routine found |
| 608 | No technically suitable priority routine found; see long text |
| 609 | No technically suitable priority routine found; see long text |
| 610 | Too many parameters for the routine &1 passed; see long text |
| 611 | Selected value is not technically suitable for the parameter |
| 620 | Select table to remove from backup |
| 621 | Selected tables removed from backup |
| 622 | Table & added to backup |
| 623 | Error removing table from backup |
| 624 | Error adding table to backup |
| 625 | &1 is of type &2. Objects of this type are not supported |
| 626 | Table & is already added to backup |
| 627 | &1 is of type &2. Objects of this type are supported |
| 630 | This activity is not relevant for carve-out packages. |
| 701 | Selection partitioning analysis should run in before program creation |
| 702 | Generated programs already exist; see long text |
| 703 | Package &1 is not active |
| 704 | Selection of indices should be done after the programs are generated |
| 751 | Field &2 of table &1 is not included in conversion |
| 752 | There are no customer fields in table &1 |
| 753 | Table &1 is not a SAP table. Use process tree activity to configure it |
| 754 | Customer key fields in std. SAP tables cannot be converted; contact SAP |
| 755 | Customer field &2 of table &1 included into the conversion (routine &3) |
| 756 | Customer field &2 of table &1 excluded from the conversion |