CNV_IUUC_REPLICATION - IUUC replication messages (HANA)
The following messages are stored in message class CNV_IUUC_REPLICATION: IUUC replication messages (HANA).
It is part of development package CNV_IUUC_REPLICATION in software component CA-LT. This development package consists of objects that can be grouped under "IUUC: Replication tools".
It is part of development package CNV_IUUC_REPLICATION in software component CA-LT. This development package consists of objects that can be grouped under "IUUC: Replication tools".
Message Nr ▲ | Message Text |
|---|---|
| 000 | MT_ID: &. Could not retrieve synonym for table & |
| 001 | Could not & db-table &. sy-subrc = & |
| 002 | Missing mass transfer mapping to schema for content |
| 003 | Error during execution of SQL statement (&1) |
| 004 | Replication of table &1 could not be stopped |
| 005 | Lock on data load could not be released for table &1 |
| 006 | Error while deleting logging tables |
| 007 | Connection unknown for mass transfer with ID &1 |
| 008 | RFC comm error &2 (rfc &1) Table &3 in MT-ID &4 |
| 009 | Program error &2 (rfc &1) Table &3 in MT-ID &4 |
| 010 | DDIC Structure &1 not available |
| 011 | You first need to delete all triggers - triggers still active for MT &1 |
| 012 | First delete all logging tables for mass transfer &1 |
| 013 | Clear Schema from Tables |
| 014 | No Authority |
| 015 | Error while killing replication jobs |
| 016 | Could not delete sender triggers or logging tables |
| 017 | Check wrong for DDIC Structure &1 |
| 018 | Create table &1 |
| 019 | Create synonym for table &1: Failed to register in IUUC_TAB_ID |
| 020 | Wrong system type, either use S(Sender) or R(Receiver) |
| 021 | Could not create configuration guid! |
| 022 | No configuration guid created yet! |
| 023 | & error on replication configuration relevant table |
| 024 | MT_ID does not exist! |
| 025 | Create Statement for mass transfer with ID &1 failed. &2 |
| 026 | Wrong replication type. |
| 027 | Password can not be empty |
| 028 | Error while connecting to remote system |
| 029 | No connection of this type for given system |
| 030 | System not supported yet. |
| 031 | RFC-connection error |
| 032 | Jobname & not supported, no stop possible. |
| 033 | Error while stopping the job: & |
| 034 | Error while deleting triggers |
| 035 | Error while deleting logging tables |
| 036 | Error during execution of &1 SQL statement |
| 037 | Error during opening SQL connection &1 |
| 038 | An Exception occurred |
| 039 | Open connection for mass transfer with ID &1 failed. &2 |
| 040 | Close connection for mass transfer with ID &1 failed. &2 |
| 041 | Schema unknown for mass transfer with ID &1 |
| 042 | Query execution for mass transfer with ID &1 failed. &2 |
| 043 | For MT ID &1, access plan creation for Migration Object &2 failed |
| 044 | For MT ID &1, access plan calculation for Migration Object &2 failed |
| 045 | For MT ID &1, Migration Objects missing |
| 046 | Get connection for configuration &1 failed |
| 047 | Create statement for Configuration &1 Connection &2 Schema &3 failed |
| 048 | Close connection for Configuration &1 Connection &2 Schema &3 failed &4 |
| 049 | Open connection for Configuration &1 Connection &2 Schema &3 failed &4 |
| 050 | Config guid does not exist |
| 051 | Exec query for Configuration &1 Connection &2 Schema &3 failed &4 |
| 052 | Get user for Configuration &1 Connection &2 Schema &3 failed &4 |
| 053 | Set role for Configuration &1 Connection &2 Schema &3 failed &4 |
| 054 | Set grant for Configuration &1 Connection &2 Schema &3 failed &4 |
| 055 | It is not possible to schedule more initial load jobs than jobs total! |
| 056 | Error during selection of Replication Application |
| 057 | Trigger missing for table &1 (mass transfer ID &2); replication suspended |
| 058 | No load or replication permitted for table & |
| 059 | No tables of mass transfer &1 are part of migration object &2 |
| 060 | No assignment of logical tables for table &1 in mass transfer &2 |
| 061 | No assignment of a key field structure for table &1 |
| 062 | No assignment of a key field structure for table &1 RELID &2 |
| 063 | All Replication Jobs stopped for configuration &1 at &2 &3 |
| 064 | Replication Jobs started for configuration &1 at &2 &3 |
| 065 | Replication Configuration is unknown |
| 066 | Data Provisioning request failed |
| 067 | Unable to RESET: Table &1 is under processing |
| 068 | Table &1 is invalid. Choose any table name from input help |
| 069 | Change can't be activated in target system for table &1 |
| 070 | Table & successfully reset |
| 071 | Table & could not be reset |
| 072 | Trigger change not possible for MaxDB and SYBASE (Pool table) |
| 073 | Table &1 is already RESET |
| 074 | No active configuration. Master Job stopped. |
| 075 | Configuration guid & does not exist |
| 076 | Reading table definition &1 from replication sender system failed |
| 077 | Table fields differ in replication and load sender system (table &1) |
| 078 | Table class &1 of table &2 is not supported for data provisioning |
| 079 | &1 does not exist in the source system |
| 080 | Trigger redefinition failed for table &1 |
| 081 | Triggers successfully redefined for table &1 |
| 082 | Wrong position number: &1 |
| 083 | Archive object processing not possible - refer to note 1652039 |
| 084 | Error during closing SQL connection &1 |
| 085 | Error while handling substitution names in ODQ scenario (MTID &1) |
| 086 | Logging table ident &1 for table &2 out of bounds |
| 087 | Illegal replication interval: Interval value must be greater than zero |
| 088 | Illegal replication interval: Unit must be either days, hour, or minutes |
| 089 | Mass transfer ID &1 does not exist |
| 090 | Suspending of table &1 not possible. Migration Object not available. |
| 091 | Replication for &1 already started |
| 092 | Delta Recording for &1 not yet active |
| 093 | Authorization for access to INDX declustering data missing in source syst |
| 094 | RFC Destination &1 unknown |
| 095 | Authority error (RFC destination &1) |
| 096 | Action not possible; initial load is already in process for &1 |
| 097 | Action not possible; replication process already scheduled for &1 |
| 098 | Cannot replicate table; it is replicated in 4 other configurations |
| 099 | Logging tables truncated for mass transfer &1 |
| 100 | Adapt old replication configurations to new configuration concept |
| 101 | Configuration for schema &1 already exist in the new model |
| 102 | Error occured during convertion of schema &1 |
| 103 | Unable to create new user roles for schema &1 |
| 104 | Unable to create replication control tables for schema &1 |
| 105 | Error occured while moving DD02L/T replication object for schema &1 |
| 106 | Error during build of local RS_ORDER table for schema &1 |
| 107 | Replication for table &1 restarted automatically due to complex change |
| 108 | Mark at least one Predefined Object to be created |
| 109 | Predefined Load Object exist already for table &1 |
| 110 | Predefined Replication Object exist already for table &1 |
| 111 | Database transactions still in process (table &1); please wait |
| 112 | User &1 has confirmed that they want to run report IUUC_REPL_RESET_OBJECT |
| 113 | User &1 has declined to run report IUUC_REPL_RESET_OBJECT |
| 114 | Settings exist for table &1 |
| 115 | Settings do not exist for table &1 |
| 116 | Settings for table &1 deleted |
| 117 | User-specific replication settings: |
| 118 | System-generated replication settings: |
| 119 | Jobs for table &1 cancelled |
| 120 | Cannot cancel jobs for table &1 |
| 121 | Source system not available; user &1 confirmed they want to proceed |
| 122 | Remote system not available;user &1 confirmed they do not want to proceed |
| 123 | Trigger for table &1 deleted |
| 124 | Synonym for source system table &1 deleted |
| 125 | Key field &1 included in the blacklist for table &2 |
| 126 | Migration object exists |
| 127 | Logging table &1 deleted |
| 128 | Error retrieving information about the target system |
| 129 | Migration object and runtime object deleted |
| 130 | Report IUUC_REPL_RESET_OBJECT finished successfully |
| 131 | Conversion object deleted |
| 132 | Database synonym for target system deleted |
| 133 | Error deleting database synonym for target system |
| 134 | Local table for receiver structure deleted |
| 135 | Error deleting local table for receiver structure |
| 136 | Target system database view deleted |
| 137 | Error deleting target system database view |
| 138 | No operations are permitted for table &1; see long text |
| 139 | Change of source system table &1 requires conversion of target table |
| 140 | Function no longer supported - use transaction LTRC instead |
| 141 | Action not possible due to current state of &1 |
| 142 | Stopping table &1 will result in inconsistencies |
| 143 | Table &1 is used by the following views: |
| 144 | Error occurred when calling function module DMC_SIN_REMOTE_GET_REDIRECTS |
| 145 | Cannot find the following tables in the source system: |
| 146 | The following tables associated with view &1 will also be replicated: |
| 147 | First start recording for the following tables: |
| 148 | The following tables must be stopped: |
| 149 | Suspending table &1 will affect the following view(s): |
| 150 | Logging table &1 for cluster &2 successfully created |
| 151 | Logging table &1 for table &2 of pool &3 successfully created |
| 152 | Logging table &1 for table &2 successfully created |
| 153 | Trigger for table &1 of cluster &2 successfully created |
| 154 | Trigger for table &1 of pool &2 successfully created |
| 155 | Trigger for table &1 successfully created |
| 156 | Action &1 for table &2 is not allowed; Order not executed |
| 157 | Use Data Provisioning feature for action; table is associated with a view |
| 158 | The following tables associated with view &1 will also be recorded: |
| 159 | Table &1 is associated with view &2 |
| 160 | Other tables assigned to view &1 must be added manually |
| 161 | Table &1 belongs to the CDS View &2 and will be added automatically |
| 162 | Table &1 is unknown in the source |
| 163 | Table &1 successfully added |
| 164 | Table &1 represented as CDS View &2. Automatic processing turned off. |
| 165 | No predefined objects assigned to table &1 |
| 166 | The predefined object assigned to table &1 does not exist |
| 167 | Template migration object &1 does not exist for table &2 |
| 168 | This system is already used as a source in another configuration. |
| 169 | Cannot stop Load/Replication. The source system is being updated. |
| 170 | Please analyze the log and repeat actions for the following tables: |
| 171 | Table replication using compatibility views selected. See long text. |
| 172 | The configuration cannot process the compatibility view &2 of table &1 |
| 173 | This configuration cannot be used to replicate CDS view &1 |
| 174 | CDS view &1 added successfully |
| 175 | Action not possible; an update is running in the source system |
| 176 | Restrictions exist for reload procedure; see long text |
| 177 | Cannot activate reload procedure; see long text. |
| 178 | Table &1 is redirected to compatibility view &2 |
| 179 | Cannot reset status flags for object &1 (type &2) in source system (&3) |
| 180 | Invalid counter length during ident generation |
| 200 | Error reading customizing tables from database. |
| 201 | Customizing configuration for schema &1 saved. |
| 202 | Duplicate table name &1. |
| 203 | Duplicate key for tabname &1 in &2. Customizing configuration not saved. |
| 204 | No include name specified. |
| 205 | Entry for &1 already exists. |
| 206 | Remote schema maintenance not supported by host &1. |
| 207 | Maintaining tables in host &1. |
| 208 | Maintaining local tables. |
| 209 | No authorization to maintain tables on &1. |
| 210 | Delete Migration objects and RTO for Mass Transfer &1 |
| 211 | Delete Migration object &1 and RTO for Mass Transfer &2 |
| 212 | Save Changes? |
| 213 | Save Changes |
| 214 | IUUC_REPL_CONTENT: Refresh settings |
| 215 | Save Changes on Exit |
| 216 | Editing of entries disabled. |
| 217 | No authority to write table &1. |
| 218 | No authority to write table &1 on host &2. |
| 219 | Insert failed for &1. |
| 220 | Insert failed for &1 on host &2. |
| 221 | Saving &1 failed. |
| 222 | No authority to read table &1. |
| 223 | No authority to read table &1 on host &2. |
| 224 | Failed to read table &1. |
| 225 | Failed to read table &1 on host &2. |
| 226 | Change Table Name |
| 227 | Assign settings for table &1 to table &2? |
| 228 | Rename |
| 229 | Copy |
| 230 | Could not retrieve table structure. |
| 231 | Replication Error |
| 232 | Replication Executed |
| 233 | Replication Scheduled |
| 234 | In Replication |
| 235 | Error While Suspending |
| 236 | Replication Suspended |
| 237 | Suspend Scheduled |
| 238 | Suspending Replication |
| 239 | Error during Initial Load |
| 240 | Initial Load Executed |
| 241 | Initial Load Scheduled |
| 242 | Initial Load Running |
| 243 | Object is not a Template! |
| 244 | Open Template with Schema Settings |
| 245 | Reload settings and discard unsaved changes? |
| 246 | Could not change table name &1 to &2. Table name &2 already exists. |
| 247 | Error when alter table &1 after source structure changed (&2) |
| 248 | Generation of statement for & failed |
| 249 | Statement for &1 can not be splitted |
| 250 | &1 has repeated fields |
| 251 | Sender system is not upgraded, creation of views not possible. |
| 252 | Creation of view &1 failed (&2). |
| 253 | Deletion of view &1 failed (&2). |
| 254 | Creation of table &1 failed. |
| 255 | Deletion of table &1 failed (&2). |
| 256 | Creation of synonym &1 to table &2 failed (&3). |
| 257 | Deletion of synonym &1 to table &2 failed (&3). |
| 258 | Creation of index on table &1 failed (&2). |
| 259 | Creation of comments for table &1 failed (&2). |
| 260 | Wrong connection type for the target system |
| 261 | MT_ID: &1. Initial load uses the differing sender destination &2. |
| 262 | MT_ID: &1. Initial load uses the differing sender DB connection &2. |
| 263 | &1 Tables scheduled with action &2 |
| 264 | Scheduling failed for action &1 |
| 265 | ODQ: No Request ID found for MT_ID &1, table &2. |
| 266 | ODQ: Couldn't access the properties of the configuration &1. |
| 267 | Error &1 for table &2 in &3 (cleaning entries) |
| 268 | Error by read of IUUC_REPL_CONFIG for table &1 schema &2 |
| 269 | Create user schema error: &1 |
| 270 | Error with After Init.-Load-BADI for Application &1. |
| 271 | Table &1 cannot be processed as table is not in Load / Replication mode |
| 272 | Parallel Replication: &1 &2 |
| 273 | Primary key of table &2 changed (Mass Transfer &3); Field &1 modified |
| 274 | Primary key of table &2 changed (Mass Transfer &3); Field &1 deleted |
| 275 | Register Configuration failed for Mass Transfer &1 and Schema &2 |
| 276 | Check create role &1 in Schema &2 failed |
| 277 | Check roles sequential procedures failed for user &1 and Schema &2 |
| 278 | Create of sequential procedures failed in Schema &1 |
| 279 | Grant privilege failed in configuration target for SLT Schema &1 |
| 280 | Grant of privileges failed in replication target for Schema &1 |
| 281 | Create control tables failed for table &1 in Schema &2 |
| 282 | Orders selection failed in Schema &1 |
| 283 | Check to update of RS_ORDER table (additional columns) failed Schema &1 |
| 284 | Delete orders failed in Schema &1 |
| 285 | Insert in status table failed for table &1 in Mass Transfer &2 |
| 286 | Deregistration in HANA target failed for Schema &1 (SID: &2, HOST: &3) |
| 287 | Create coments on table &1 in Schema &2 failed |
| 288 | &1 went wrong for Mass Transfer &2 and Table &3 |
| 289 | &1 wrong year for Mass Transfer &2 and Table &3 |
| 290 | &1 value unknown for Mass Transfer &2 and Table &3 |
| 291 | &1 wrong date for Mass Transfer &2 and Table &3 |
| 292 | Error when creating keys for the table &1 |
| 293 | Error ocurred for Queue Alias &1. It might already be available |
| 294 | Specify a table name |
| 295 | You can only resume tables that have the status 'Suspended' |
| 296 | User in SAP HANA system does not have the system privilege "CATALOG READ" |
| 300 | No tables match the given selection conditions |
| 301 | No authorization to retrieve logging table statistics |
| 302 | Functionality is not supported for non-SAP sender systems |
| 303 | You have only authorizations to display configuration data |
| 304 | Deletion of connection parameters to the initial load system failed |
| 305 | Connection parameters to the initial load system deleted |
| 306 | Provide a valid RFC destination |
| 307 | Provide a valid DB connection name |
| 308 | Provide a valid DB schema name (DB user name) |
| 309 | Changing the source destination for the initial load failed |
| 310 | Source destination for the initial load changed successfully |
| 311 | Data is read from all clients during initial load |
| 312 | Error while rescheduling Tab &1 for replication |
| 313 | MT_ID &1: Table &2 is not in replication mode and cannot be adjusted |
| 314 | MT_ID &1: Suspending the replication of table &2 failed |
| 315 | MT_ID &1: Adjusting table &2 in the receiver failed |
| 316 | MT_ID &1: Adjusting the tables failed. See the appl. log for details |
| 317 | MT_ID &1: resuming the replication of table &2 failed |
| 318 | MT_ID &1: Adjusting the tables finished. See the appl. log for details |
| 319 | MT_ID &1: Adjusting target tables started |
| 320 | Error while retrieving RFC-parameters for rfc destination &1 |
| 321 | No Authority to retrieve RFC system info for rfc destination &1 |
| 322 | Error deleting DDIC table &1 |
| 323 | Configuration &1 created |
| 324 | All logging tables will be processed |
| 325 | Only logging tables that contain records will be processed |
| 326 | Change log failed for Mass Transfer &1 |
| 327 | SLT: Error in replication MT_ID &1, table &2. |
| 328 | Error while establishing RFC connection to the source system |
| 329 | Error while establishing RFC connection to the target system |
| 330 | Error while establishing DB connection; check your DB connection settings |
| 331 | Error occurred when opening DB connection |
| 332 | Enter the RFC destination |
| 333 | Choose the target scenario |
| 334 | Enter the initial load jobs |
| 335 | Instance number cannot be non-numeric |
| 336 | No data have been found for the specified mass transfer |
| 337 | Logical Port number cannot be non-numeric |
| 338 | Load of table &1 cannot be suspended as table has been completely loaded |
| 339 | &1 |
| 340 | Failed to load configuration with MT ID &1 |
| 341 | Could not determine table category for table &1 |
| 342 | SLT system must connect to target system by using a database connection |
| 343 | No inconsistencies identified; proxy table and target table for table &1 |
| 344 | Table &1 is not part of configuration &2 |
| 345 | &1 &2 &3 &4 |
| 346 | SQL exception; see long text |
| 347 | Target table not completely adjusted; see application log |
| 348 | Target table adjusted successfully |
| 349 | Inconsistencies still exist between proxy table and target table |
| 350 | This expert function cannot be used for this target system database |
| 351 | The following inconsistencies exist for table &1: |
| 352 | End of inconsistencies for table &1 |
| 353 | Field &1 added successfully |
| 354 | Cannot add field &1 to table |
| 355 | Field &1 deleted successfully |
| 356 | Cannot delete field &1 from table |
| 357 | Field &1 adjusted successfully |
| 358 | Cannot adjust field &1 in table |
| 359 | Mass Transfer &1 does not exist |
| 360 | Authority check error |
| 361 | You are not authorized to execute this expert function |
| 362 | Error occurred when getting proxy table name for table &1 |
| 363 | Cannot find synonym &1 in the database |
| 364 | Expert Function 'Resolve Inconsistencies' has checked table &1 |
| 365 | Field &1 should be added to target table &2 |
| 366 | Field &1 should be deleted from target table &2 |
| 367 | Field &1 has changes between proxy table and target table &2 |
| 368 | The following inconsistencies still exist for table &1: |
| 369 | DB connection &1 doesn't exist |
| 370 | Not authorized to execute this action for mass transfer ID &1 |
| 371 | Expert function only relevant for ABAP-based SAP source systems on HDB |
| 372 | No source system tables are redirected to any views; no action required |
| 373 | Table &1 has been redirected to view &2 |
| 374 | Table &1 has been redirected to view &2 (CDS view &3) |
| 375 | Some source system tables have been redirected to views; action required |
| 376 | Cannot execute expert function; errors occurred |
| 377 | Structure of table incorrect; use a logging table with correct structure |
| 378 | Table &1 does not exist! |
| 379 | User &1 is not authorized to run cleanup job for mass transfer ID &2 |
| 380 | Error occurred when opening DB connection |
| 381 | The database only accepts encrypted connections |
| 382 | Cannot display trigger code; table &1 is not part of mass transfer ID &2 |
| 383 | No actions possible for this table. |
| 384 | Temporary table cannot be loaded/replicated; action for table &1 canceled |
| 385 | Some TCFSC tables have been skipped, please see next popup for details |
| 386 | You do not belong to group &1; action canceled |
| 387 | Failed to update: MT_ID &1 Field Name &2; see long text |
| 388 | Type mapping updated successfully |
| 389 | Error while accessing listener class (see log for details) |
| 390 | There is already a listener registered for configuration &1 |
| 391 | Error raised by replication listener (see log for details) |
| 392 | Ignore the index creation for all key fields |
| 393 | Error reading configuration data; see next error message for details |
| 394 | Error while deleting configuration; see next error message for details |
| 395 | Error reading connection data; Connection Name &1 unknown |
| 396 | Error while creating configuration &1 |
| 397 | Error creating configuration &1; Target System Connection &2 already used |
| 398 | Too many logs to be searched, specify table name or refine time frame |
| 399 | No logs are found for mass transfer &1 |
| 400 | Error occured while checking the existance for schema &1 |
| 401 | Schema &1 already exists in system &2 |
| 402 | Option &1 not allowed for parameter &2 |
| 403 | Enter a valid table name |
| 404 | ABAP type &1 is not supported by the database |
| 405 | User &1 and roles in target system could not be deleted |
| 406 | Cannot delete table &1 in target system |
| 407 | Failed to update database connection password |
| 408 | Updating the password for databace connection of type &1 not supported |
| 409 | Warning: Limitation exist! |
| 410 | Predefined objects cannot be used for mass transfer ID &1 |
| 411 | Fallback BAdI class for OLO: empty implementation |
| 412 | Configuration is inactive |
| 413 | Cannot load or replicate table &1 (key field issue); see long text |
| 414 | Replication Master Controller Job cannot be started |
| 415 | Illegal HDB Port: Either port or logical system should be specified |
| 416 | Configuration guid &1 is not found |
| 417 | Port number cannot be non-numeric |
| 418 | Repair of proxy table &1 has failed |
| 419 | Cannot replicate data from field &1 (table &2); see long text |
| 420 | Functionality is only supported in S/4 HANA systems |
| 421 | Cannot display table information; table name exceeds 30 characters |
| 422 | Replication from legacy database to SAP Vora is not supported |
| 423 | Error while deleting configuration; System is in upgrade phase |
| 424 | Proxy definition is incomplete. Specify proxy host and port. |
| 425 | No authorization to activate configuration with mass transfer &1 |
| 426 | Configuration with mass transfer &1 could not be activated |
| 427 | SYS_REPL schema does not exist |
| 428 | Action not possible; another user is currently using this option |
| 429 | Cannot replicate table (&1); table has a compatibility view |
| 430 | Trigger missing for view &1 (mass transfer ID &2); replication suspended |
| 431 | &1 already exists in configuration. Stop &1 before starting a new action |
| 432 | &1 must first be stopped before action can be applied |
| 433 | Cannot replicate table &1; sharing type (DD09L) must be empty or �L� |
| 434 | Cannot create status record for object &1 in /1LT/OBJECTS; contact SAP |
| 435 | Cannot delete status record for object &1 in /1LT/OBJECTS; contact SAP |
| 436 | Cannot update status record for object &1 in /1LT/OBJECTS; contact SAP |
| 437 | Cannot update status records in table /1LT/OBJECTS; contact SAP |
| 438 | Different actions have been selected for object &1; see long text |
| 439 | Object &1 has objects with actions that will result in inconsistencies |
| 440 | No subordinate objects found for object &1 |
| 441 | ABAP type &1 is not available on the basis release of the system |
| 442 | Logging table and sequence object for table &1 deleted |
| 443 | Specify at least one table or CDS View |
| 444 | Subscription for object &1 failed |
| 445 | Cannot adjust buffer table (object &1); restart initial load/replication |
| 446 | Cannot delete buffer table for object &1 |
| 447 | Cannot create buffer table for object &1; contact SAP for support |
| 448 | Cannot disable buffer table priority mode for object &1; contact SAP |
| 449 | Cannot set reading type for object &1; check performance options |
| 450 | The source table and target table do not have the same number of fields |
| 451 | It is not possible to resolve the inconsistencies for this configuration |
| 452 | Cannot adjust proxy tables and target tables created for CDS view &1 |
| 453 | Key field &1 changed (source table &2); see long text |
| 500 | User &2 is not authorized to use RFC connection &1 |
| 501 | Cannot connect to source system; communication error (RFC connection &1) |
| 502 | Object &1 does not exist in source system |
| 503 | Mass transfer ID &1 already uses this recording mechanism |
| 504 | Cannot switch recording mechanism; the configuration contains objects |
| 505 | This recording mechanism cannot be used for this configuration |
| 506 | This recording mechanism cannot be used for this configuration |
| 507 | Cannot change recording mechanism; config. uses DB connection to source |
| 508 | The source system does not support this recording mechanism |
| 509 | Recording mechanism changed successfully for mass transfer ID &1 |
| 510 | Enter a 6 character Queue alias |
| 511 | Error while loading the configuration: &1 |