CY - Capacity Requirements Planning
The following messages are stored in message class CY: Capacity Requirements Planning.
It is part of development package CY in software component PP-CRP-ALY. This development package consists of objects that can be grouped under "R/3 Application development: Capacity Planning".
It is part of development package CY in software component PP-CRP-ALY. This development package consists of objects that can be grouped under "R/3 Application development: Capacity Planning".
Message Nr ▲ | Message Text |
|---|---|
| 000 | ---------------------------------------------------------------* |
| 001 | Standard errors * |
| 002 | *--------------------------------------------------------------* |
| 003 | Error when converting a factory calendar day into a date |
| 004 | Error when converting a date into a factory calendar day |
| 006 | Incorrect date format |
| 009 | Error when assigning a number to the capacity requirements |
| 010 | Number & for capacity requirements & lies in the critical area |
| 011 | Assign highest number & for capacity requirement & |
| 015 | Error when inserting in table &1: Of &2 records &3 records were posted |
| 016 | Error during update in table &1: Of &2 records &3 records were posted |
| 017 | Error when determining the posting period |
| 018 | Error when determining the calendar week |
| 019 | Error when determining the first day in a calendar week |
| 020 | Error in date format for start date of evaluations |
| 021 | Error in date format for finish date of evaluations |
| 022 | Error in date format for dispatching of backlog |
| 023 | Error when calculating the evaluation period |
| 024 | Error when calculating the data base reading period |
| 025 | Error when calculating the evaluation period |
| 026 | Name of evaluation already exists |
| 027 | The name & is reserved for system purposes |
| 028 | Please select an evaluation |
| 029 | There are no evaluations |
| 030 | Data cannot be written to data base |
| 031 | The background job cannot be generated |
| 032 | The background job cannot be started |
| 033 | Error when reading data base |
| 034 | Administrative data cannot be read |
| 035 | Error writing to the database |
| 036 | Error when writing administrative data to data base |
| 050 | You cannot use the operator BT |
| 051 | The operator & does not exist |
| 053 | The upper limit of the range is lower than the lower limit |
| 055 | The entry & does not have a correct date format |
| 056 | The date & does not exist |
| 090 | The planning table is already active. Recursive calling up is not allowed |
| 097 | Available capacity |
| 098 | Operation & & was changed |
| 099 | ---------------------------------------------------------------* |
| 100 | * Errors in capacity planning * |
| 101 | ---------------------------------------------------------------* |
| 102 | The system could not read any data from the data base |
| 103 | Various units are added together |
| 104 | Please select only one version for the period display |
| 105 | Please select a version for the period display |
| 106 | Please enter a start and a finish date for the time interval |
| 107 | Selection criteria are missing |
| 108 | You must choose at least one order category |
| 109 | Only the scheduling level "detailed" is valid at present for work orders |
| 110 | There is no setup and no teardown at work center & |
| 111 | The object has no capacity requirements |
| 112 | The objects can not be displayed together |
| 113 | Please enter a valid distribution key |
| 114 | The std. profile & was not found when the transaction was started |
| 115 | Please assign a valid overall profile to the parameter & |
| 116 | You cannot use the period type "factory calendar day" |
| 117 | You cannot use the period type "posting period" |
| 118 | You cannot enter factory calendar days or posting periods |
| 119 | Please enter a start date that is before the finish date |
| 120 | Please select at least one work center |
| 121 | Please enter the posting period using the format "YYYYPPP" |
| 122 | There are no work centers that match the entered selection criteria |
| 123 | Please enter a unique sort sequence |
| 124 | The graphic can be generated for a maximum of 32 work centers/capacities |
| 125 | Please select a time unit for the display of the capacity |
| 126 | Please select at least one period |
| 127 | Please select a work center |
| 128 | Please select only one work center |
| 129 | Only capacity requirements from & to & can be displayed |
| 130 | Please select at least one set of dates (earliest, latest) |
| 131 | Please enter a unique sort sequence |
| 132 | Please position the cursor on the part of the screen containing data |
| 133 | You should enter a unit for the standard value. |
| 134 | Select at least one line |
| 135 | The object & can not be determined unambiguously |
| 136 | There is no special dispatching function available for you. |
| 137 | No objects have been selected. Function not possible |
| 138 | In the evaluation period no labor has been assigned to the capacity |
| 139 | Order & has no requirements in the eval. period, so there is no display |
| 140 | No capacity requirements were found in the evaluation period |
| 141 | The orders entered do not exist |
| 142 | Please specify a continuous sequence for sorting |
| 143 | Please specify selection criteria first |
| 144 | There are no capacity requirements for the current selection and settings |
| 145 | No capacity requirements have been found for the selected periods |
| 146 | Please enter the name of a hierarchy and the corresponding plant |
| 147 | The graphic can be generated for a maximum of 32 orders |
| 148 | The graphic can be generated for a maximum of 32 periods |
| 149 | The selected value has no capacity requirements |
| 150 | Please maintain set & in combination & first |
| 151 | Since there is no data, the file will not be created on your PC |
| 152 | Please select only one version of the capacity detail list |
| 153 | Please select only one type of graphic |
| 154 | An error occured when file & on your PC was opened |
| 155 | An error occurred when data was written to file & on your PC |
| 156 | An error occurred when data was transferred to file & on your PC |
| 157 | File & has been created on your PC |
| 158 | The data transfer is only possible to a PC |
| 159 | The work centers entered have no capacities |
| 160 | & & does not exist |
| 161 | The work centers entered do not exist or have no capacity |
| 162 | The entered PC file name is not correct |
| 163 | The entered PC file name for the standard overview is not correct |
| 164 | The entered PC file name for the detailed cap. list is not correct |
| 165 | The entered PC file name for the variable overview is not correct |
| 166 | The entered PC path name is not correct |
| 167 | & & does not exist in plant & |
| 168 | Please enter criteria for the work center selection first |
| 169 | The flow control of the transaction cannot be initialized |
| 170 | Error when determining the period for a date |
| 171 | No distribution key has been maintained for capacity category & |
| 172 | Please select one selection profile |
| 173 | Please select one option profile |
| 174 | Please select one overall profile |
| 175 | Please select only one graphics profile |
| 176 | Please select one list profile |
| 177 | Please select one combination |
| 178 | Please select one version of the variable overview |
| 179 | When the DB table & was read, the max. no. of & records was reached |
| 180 | The hierarchy & does not exist in plant & |
| 181 | Plant & does not exist |
| 182 | No scheduling was carried out for the production quantities entered |
| 183 | Specify a plant for the hierarchy & |
| 184 | There are no operations for the selected work center |
| 185 | Version & of the detailed list does not exist |
| 186 | The set for the initial screen does not exist |
| 187 | The set for the selection of the capacity categories does not exist |
| 188 | The set for the selection of the work centers does not exist |
| 189 | The set for the selection of the orders does not exist |
| 190 | Set & does not exist. Please press PF1 for more information. |
| 191 | There are no orders for the selected work centers and options |
| 192 | There is no pool for the selected work centers and options |
| 193 | There is no backlog for the selected work centers and options |
| 194 | There is no overload for the selected work centers and options |
| 195 | There are no requirements for the selected orders and options |
| 196 | Set & not found |
| 197 | You cannot refer to the column which you are presently defining |
| 198 | The column name does not exist |
| 199 | Definition of column & indirectly contains column & |
| 200 | Minimum load mayt not exceed maximum load |
| 201 | Table entries delivered by SAP may not be deleted |
| 202 | Period types F, G, H are not currently supported in capacity planning |
| 203 | Select another period type |
| 204 | Select a PP planning calendar |
| 205 | The planning calendar & was not found in plant & |
| 206 | The order does not fulfill the selection criteria so there is no display |
| 207 | The number of data records to be displayed is greater than 1024 |
| 208 | Factor & of & does not lie in the permitted value interval |
| 209 | Maintenance tasks cannot be changed on the planning table |
| 210 | Production orders cannot be changed |
| 211 | Overall profile &1: Control profile must contain presentation form &2 |
| 212 | The requirement percentages must be either equal or ascending |
| 213 | There must be at least one stored entry |
| 214 | No distribution has been defined for the function & |
| 217 | Specify the operator |
| 218 | Please enter an integral number |
| 219 | Please only enter one combination of sets per column name |
| 220 | You cannot maintain an operator for value category & |
| 221 | Value category 1B can only be used if there is already a value categ. 1A |
| 222 | Only when you enter the first value categ. 1A can you maint. an operator |
| 223 | For columns with the value cat. 4, only this entry can be defined |
| 224 | Please maintain the operator for the first entry of value category 1A |
| 225 | Please enter unique column assigments |
| 226 | Entries delivered by SAP cannot be changed |
| 227 | If you do not want to define the column, please also delete the name |
| 228 | If you do not want to define the version, please also delete the name |
| 229 | Please maintain value category and value first |
| 230 | Please enter the name of a hierarchy |
| 231 | Column & does not exist |
| 232 | Value cat. & does not exist |
| 233 | Variant & does not exist |
| 234 | The column heading is longer than the width of the column (will be split) |
| 235 | Planned orders do not have a status |
| 236 | The sequence of the columns must begin with 1 and not have any gaps |
| 237 | The maximum of & operations has been read |
| 238 | The maximum of & orders has been read |
| 239 | The maximum of & work centers has been read |
| 240 | The maximum number of & capacities has been read |
| 241 | The maximum number of & capacity requirements has been read |
| 242 | The maximum number of & planned orders has been read |
| 243 | You cannot enter a date in factory calendar days |
| 244 | You cannot enter a date in posting periods |
| 245 | The date does not correspond to the date type set |
| 246 | Maximum number of columns/versions has been reached. Enter new version. |
| 247 | You cannot enter completion confirmations. Only display possible |
| 248 | Planned orders cannot be confirmed. |
| 249 | Function not possible for planned orders |
| 250 | This function cannot be used with maintenance orders |
| 251 | This function cannot be used with networks |
| 252 | Conversion "&" to "&" not possible! (Center: "&", Cap. Category: "&") |
| 253 | Selected function cannot be carried out - cursor is not on relevant data |
| 254 | Table TCY09 converted successfully |
| 255 | Either select orders or planned orders |
| 256 | The planned orders entered do not exist |
| 257 | Planned order & has no rqmts. in the eval. period, so there is no display |
| 258 | Leveling functions cannot be executed for simulative planned orders |
| 259 | You should either select work centers or people |
| 260 | No orders are assigned to the WBS element, so no processing occurs |
| 261 | Either enter a material or a routing |
| 262 | Fully define a routing |
| 263 | Enter either a material, a routing or a sales order |
| 280 | No actual capacity requirements were found in the evaluation period |
| 294 | Internal error when updating the planning table: Refer to the long text |
| 295 | Function not possible for planned orders |
| 296 | Function not possible for SOP orders |
| 297 | The profile entered for the capacity availability check is not suitable |
| 298 | No reqmts/caps exists or not relevant to finite scheduling |
| 299 | The status selection profile & does not exist. (see long text) |
| 300 | First of all enter selection criteria |
| 301 | The selection criteria relate to more than one object type |
| 302 | The object set from selection profile contains no selection criteria |
| 303 | Object set and filter set contain the same selection criteria |
| 304 | There are no filter criteria available |
| 305 | The object set contains more than eight selection criteria with variables |
| 306 | The filter ser contains more than eight selection criteria with variables |
| 307 | Error when reading profile |
| 308 | The selection criteria do not relate to any available object type |
| 309 | Scheduling error or Term. data not complete. See protocol |
| 310 | The set & is not available (please see long text) |
| 311 | Presentation type and layout type do not belong together |
| 312 | The object set and filter set must be different. |
| 313 | Error in calculating period |
| 314 | Error in calculating date for dispatching backlog |
| 315 | The date for dispatching the backlog is outside the d.base reading period |
| 316 | The evaluation period is not within the database reading period |
| 317 | The entries for "factory calendar" and "posting periods are not valid |
| 318 | Enter a reduction level |
| 319 | Changes to the standard SAP profiles are not allowed |
| 320 | Splitting and allocation of phases is not permitted |
| 321 | Dispatching not permitted |
| 322 | Dispatching not possible |
| 323 | No authorization for dispatching |
| 324 | & &/&: Order can not be locked |
| 325 | & &/&: Error in setting status "dispatched" |
| 326 | Resetting the status "dispatched " not permitted |
| 327 | Resetting the status "dispatched" not possible |
| 328 | No authorization to reset status |
| 329 | Error in resetting the status "dispatched" |
| 330 | The evaluation profile & could not be read |
| 331 | The control profile & could not be read |
| 332 | The overall profile & could not be read |
| 333 | The period profile & could not be read |
| 334 | The selection profile & could not be read |
| 335 | The strategy profile & could not be read |
| 336 | The time profile & could not be read |
| 337 | You must enter a valid scheduling level |
| 338 | The operation & in order & has already been dispatched |
| 339 | Start date in the past |
| 340 | & &/&: Start date before actual finish date |
| 341 | & &/&: The operation has already been dispatched |
| 342 | Network &/&: The start date has a fixed branch info indicator |
| 343 | Network &/&: The start date is before the constraint date |
| 344 | Network &/&: The start date is after the constraint date |
| 345 | Network &/&: The finish date has a fixed branch info indicator |
| 346 | Network &/&: The finish date is before the constraint date |
| 347 | Network &/&: The finish date is after the constraint date |
| 348 | The work center & in plant & is locked |
| 349 | The work center & in plant & has a deletion flag |
| 350 | Order &/&: No start date given |
| 351 | The planning period does not lie within the database reading period |
| 352 | The planning period does not lie within the evaluation period |
| 353 | Listviewer or MS Windows are not correctly installed |
| 354 | List successfully exported into the listviewer |
| 355 | Target file for the list could not be opened |
| 356 | List could not be written in the file |
| 357 | The quantity of data selected is too large for the listviewer |
| 358 | There are still entries for flow control & |
| 359 | You should enter a CUA status for the change mode |
| 360 | The planning table profile & could not be read |
| 361 | The profile for the planning table (tabular form) could not be read |
| 362 | You should enter a CUA status for the display mode |
| 363 | No groups have been defined for the layout & |
| 364 | You should check whether you need a period profile |
| 365 | Enter a profile for the planning table (tabular form) |
| 366 | Enter a profile for the planning table |
| 367 | There is no scheduling log |
| 368 | Order &/operation &: Split & was deleted |
| 369 | The profile & has not yet been read |
| 370 | The list profile & could not be read |
| 371 | You should enter a list profile |
| 372 | Do not select splits that are to be deleted |
| 373 | The report can not be executed |
| 374 | Capacity category does not exist or cannot be selected |
| 375 | Initial view for capacity category & not found |
| 376 | Person not found |
| 377 | Enter a grouping and sort criteria |
| 378 | You should define the split completely |
| 379 | Planned order & / operation &: Requirements can not be split |
| 380 | No authorization for changes to order & |
| 381 | Order & could not be locked |
| 382 | You can only assign requirements from labor capacities to people |
| 383 | You should only assign rqmts. from non-labor caps to indiv. caps. |
| 384 | No objective given for the allocation |
| 385 | & is not an individual capacity |
| 386 | The object selected is not a split |
| 387 | The split has not been dispatched and can therefore not be deallocated |
| 388 | Status "Dispatched" can not be reversed |
| 389 | The GUI menu given for the change mode is not consistent |
| 390 | The GUI menu given for the display mode is not consistent |
| 391 | You have no authorization to make changes |
| 392 | No sort is maintained in layout & chart & |
| 393 | No grouping is maintained in layout & chart & |
| 394 | Planned order changed |
| 395 | Planned order logically deleted |
| 396 | Planned order not found |
| 397 | Planned order locked |
| 398 | Error when locking planned order |
| 399 | You should first enter a presentation type |
| 400 | Direct assignment of remaining split record not allowed |
| 401 | Capacity requirements can not be displayed |
| 402 | Operation is already dispatched |
| 403 | Split has not been assigned |
| 404 | The remaining split cannot be deleted |
| 405 | Operation was deallocated because of changes relevant to scheduling |
| 406 | The remaining split record cannot be dispatched |
| 407 | The split has already been dispatched |
| 408 | The status "dispatched" cannot be set |
| 409 | You cannot dispatch to the work center entered |
| 410 | The quantity of all the splits is greater than the operation quantity |
| 411 | The work of all the splits is greater than the work in the operation |
| 412 | The individual capacity does not belong to the capacity |
| 413 | The person belongs neither to the capacity not to the work center |
| 414 | You should select only one entry as the heading |
| 415 | The key is not a sort key |
| 416 | To transfer people, splits must be selected |
| 417 | A sort key must be entered for the group 0 |
| 418 | You should enter a sort layout key |
| 419 | You should either enter a group 0 or groups not equal to 0 |
| 420 | Phases cannot be dispatched or deallocated |
| 421 | The capacity requirements are already split |
| 422 | Person not valid at given point in time |
| 423 | Error when scheduling split & |
| 424 | The overall profile & is faulty |
| 425 | Overall profile & already exists in client &. Overwrite? |
| 426 | The name of the overall profile must start with Z. |
| 440 | Planned order & has no valid production versions |
| 441 | Invalid production version for planned order & |
| 442 | No planned orders with valid production versions exist |
| 443 | Planned order & was rescheduled using the next production version |
| 444 | Planned order & could not be rescheduled for the next line |
| 445 | Planned order &: Rescheduling with production version was rejected |
| 446 | Change production version on error was not executed |
| 450 | Planned order &1 operation &2 were deleted on rescheduling |
| 451 | Changes cannot be made to planned orders for planned independent reqmts |
| 452 | Changes cannot be made to directly produced planned orders |
| 497 | ***++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*** |
| 498 | *** PERIOD PLANNING TABLE MESSAGES |
| 499 | ***++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*** |
| 500 | Place the cursor on valid line or valid field |
| 501 | View & could not be blocked, please try later |
| 502 | Format key & already processed: Lock not possible |
| 503 | Layout key "&" was saved -> F1 |
| 504 | Format key & could not be saved |
| 505 | No group indicated as heading group in layout & chart & |
| 506 | Please choose a period for display of individual elements |
| 507 | Work center is not loaded in the planning table. Resched. not possible |
| 508 | Place the cursor on a requirements line or work center |
| 509 | No requirements elements have been selected |
| 510 | No period may be selected for dispatch- and deallocation functions |
| 511 | Planning results were saved |
| 512 | Planning period was exceeded |
| 513 | Please select requirements elements for distribution display |
| 514 | Planning period was exceeded |
| 515 | Place the cursor on a period or select a period |
| 516 | Structures of the layout key & could not be saved |
| 517 | Search string "&" not found |
| 518 | There are & messages. You should look at the log |
| 519 | Select a resource |
| 520 | No work centers or orders were found |
| 521 | Overall profile "&" was not found |
| 522 | Evaluation profile "&" was not found |
| 523 | Time profile "&" was not found |
| 524 | Period profile "&" was not found |
| 525 | Control profile "&" was not found |
| 526 | Planning table (tabular form) profile "&" was not found |
| 527 | Planning table profile "&" was not found |
| 528 | Strategy profile "&" was not found |
| 529 | Layout-ID has not been maintained in the planning table (tabular form) |
| 530 | Layout ID has not been maintained in the planning table |
| 531 | Display "&" in the control profile is unknown |
| 532 | Layout ID "&" has not been found |
| 533 | Maintain grouping for layout & |
| 534 | No structures defined in the layout key "&" |
| 535 | Program error: READ_WITH_INDEX for structure & index & not found |
| 536 | Display fields for layout key were not found : "&" |
| 537 | You must enter the layout- key and category as reference basis |
| 538 | The layout key "&" category "&" has already been defined |
| 539 | Layout key "&" was saved |
| 540 | No requirements in evaluation period were found |
| 541 | Fields not selected were sorted according to structure |
| 542 | Fields not selected were sorted according to key word |
| 543 | Layout key "&" was not found |
| 544 | Layout key "&" category "&" has not yet been maintained in language "&" |
| 545 | More than 999 resources were selected |
| 546 | Message log does not contain any messages |
| 547 | You should select only one resource for manual dispatching |
| 548 | The first period has already been reached |
| 549 | The last period has already been reached |
| 550 | Search string & was found |
| 551 | Planning results were not saved |
| 552 | Maintain layout key for layout & |
| 553 | View "&" can not be displayed |
| 554 | Enter the type of layout key |
| 555 | Sort key "&" not found |
| 558 | Only select one resource when dispatching or rescheduling |
| 559 | In graphical object type &1 object representation &2 is not maintained |
| 561 | PGM ERR: TCY31_H_TAB buffering "&" "&" "&" "&" not found |
| 563 | No sort found for layout ID "&" |
| 565 | Layout & chart & sort & group & not found |
| 566 | Layout & in profile & not fully maintained |
| 567 | Enter item number for sort key item |
| 568 | A negative available capacity has arisen |
| 569 | A negative capacity requirements have arisen |
| 570 | Sort fields for layout key & were not found |
| 571 | Layout key and field selection were deleted: & |
| 572 | Transport system does not allow any change: & & & & |
| 573 | Maximum number of selectable fields is &. |
| 574 | Select only one line |
| 575 | The function is only supported for "planning direction forwards". |
| 576 | The function is only supported with "Insert operation". |
| 596 | PGM ERR: & & & & |
| 597 | Structure & not supported |
| 598 | Requirements with no load in evaluation period not displayed |
| 599 | & & & & |
| 600 | No independent data exists. |
| 610 | > Function: & |
| 611 | Requirements group/-combination &/& & in chart/line & |
| 612 | & requirements groups generated, deleted or changed. |
| 613 | Individual group requirements & for group/combination &/& & |
| 614 | & individual group requirments, deleted or changed. |
| 615 | < function: & |
| 616 | Chart sorted |
| 617 | Select a chart |
| 640 | Profile for planning table was initialized |
| 641 | Profile for planning table & & was already converted or is new |
| 642 | Graphical object type selection & & not found. |
| 643 | Heading for table section in chart & not maintained |
| 644 | Graphical object type selection & not found |
| 645 | GANTT chart: Menu function & not known |
| 646 | Capacity requirements group/-combination &/&: function & triggered |
| 647 | Capacity requirements &: Function & triggered |
| 648 | GANTT chart: Function <Alive> triggered |
| 649 | GANTT chart: menu function & triggered |
| 650 | GANTT chart: function <Continue> triggered |
| 651 | Drop graphical object: start & &, finish & & |
| 652 | Drop graphical object: target chart/-line &/&, function & |
| 653 | Drag and drop graphical object: from & to & invalid |
| 654 | Drop graphical object: chart/line &/& invalid |
| 655 | GANTT chart: function <Cancel> triggered |
| 656 | GANTT chart: function <Exit> triggered |
| 657 | GANTT chart: function <Back> triggered |
| 658 | GANTT chart: function & not possible |
| 659 | Line representation selection: no representation selected |
| 660 | Line representation selection: & status & not valid |
| 661 | Table line & & invalid |
| 662 | Representation selection: no representation selected |
| 663 | Representation selection: & & status & does not exist |
| 664 | Representation selection & & not found |
| 665 | Object representation & has no graphical element types |
| 666 | Represenetation selection & incomplete |
| 667 | Profile planning table: &, no representation profile maintained |
| 668 | Chart & not known |
| 669 | Group/combination &/& not known |
| 670 | Graphical object selection: no object type selected |
| 671 | Graphical object type selection: status & does not exist |
| 672 | A data segment & & does not exist |
| 673 | Graphical object type & has not fields |
| 674 | Graphical object type selection & is incomplete |
| 675 | Graphical object type & not found |
| 676 | Object representation selection: status & sequence & cannot be checked. |
| 677 | Line representation selection: status & sequence & cannot be checked. |
| 678 | Graph.obj.type selection: status & sequence & cannot be checked. |
| 679 | Graphic object type: & index & is not valid. |
| 680 | & for requirements grouping & & not found. |
| 681 | & for capacity requirements & & & not found. |
| 682 | Chart profile & not found |
| 683 | Object representation profile for object selection & not found |
| 684 | Define CUA-status in control profile. |
| 685 | Chart &: No columns in table section. |
| 686 | "Drag & drop" profile & not found. |
| 687 | Requirements grouping empty. |
| 688 | Internal error: Change indicator not defined. |
| 689 | Communication error occurred in the planning table. |
| 690 | Window ID is invalid. |
| 691 | Graphics profile & & & no found |
| 692 | Time axis profile & not found |
| 693 | Unit of measure & not found |
| 694 | No components exist |
| 695 | Component & with rqmts date & and rqmts quantity & not available |
| 696 | Dispatching sequence for strategy profile & not maintained |
| 697 | Assignment of requirements grouping & to a chart is not possible |
| 698 | & & & & |
| 699 | & & & & |
| 700 | Sub-operations can not be dispatched |
| 701 | Order & operation & is not relevant for scheduling |
| 702 | Scheduling error -> Scheduling log |
| 703 | Order & operation & begins after start of a successor |
| 704 | Order & operation & finishes before end of a predecessor |
| 705 | Order & operation &: "Today" scheduling since time is in the past |
| 706 | No capacities have been defined for work center & |
| 707 | Order & operation & is not dispatched |
| 708 | Error on conversion of units & to seconds |
| 709 | Error on conversion of internal units of time: & & |
| 710 | Capacity header record & for work center & not found |
| 711 | Order & operation &: No capacity record found |
| 712 | Order & operation &: Max. interop. time to predecessor & exceeded |
| 713 | Order & operation &: Max. interop. time to successor & exceeded |
| 714 | Order & operation/phase & has the status "confirmed" |
| 715 | Order & operation/phase & has status "partially confirmed" |
| 716 | Capacity requirements record for capacity category & not found |
| 717 | Commitment record not found on capacity ID & |
| 718 | Order & phase & was dispatched |
| 719 | Order & operation &: Overlap conflict with predecessor & |
| 720 | Order & operation &: Overlap conflict with successor & |
| 721 | Order & operation & lies outside operation float |
| 722 | Order & operation & lies outside float before prod. + operation float |
| 723 | Order & operation & lies outside float after production |
| 724 | Order & operation & begins in the past |
| 725 | & does not belong to resource network structure & in plant & |
| 726 | & has no connection with predecessor & in res. netw. struct. & in plant & |
| 727 | & has no connection with successor & in res. netw. struct. & in plant & |
| 728 | Order & operation &: Minimum overlap with predecessor & not achieved |
| 729 | Order & operation &: Minimum overlap with successor & not achieved |
| 730 | Order & operation & and element were deallocated |
| 731 | Order & operation & suboperation & not relevant for scheduling |
| 732 | Order & operation & was dispatched to work center & |
| 733 | Order & operation & suboperation & was dispatched to work center & |
| 734 | Dispatching dates: & & - & & |
| 735 | Order & operation & starts before basic start date of order |
| 736 | Order & operation & finishes after basic finish date of order |
| 737 | Operation was changed. |
| 738 | Dispatched operation was changed. You should take long text into account. |
| 739 | Order & operation & has the status "confirmed" |
| 740 | Order & operation & has the status "partially confirmed" |
| 741 | Work center & for the operation was entered manually |
| 742 | Work center & for sub-operation & was entered manually |
| 743 | Order & phase &: No capacity requirements record found |
| 744 | Order & operation &: No remaining av. cap. available in planning period |
| 745 | Order & operation & suboperation &: No rem. available capacity available |
| 746 | Order & operation &: Work center was changed manually |
| 747 | Operation & sub-operation &: Work center was changed manually |
| 748 | Order & operation &: Start date limit exceeded |
| 749 | Order & operation &: Finish date limit exceeded |
| 750 | Order & operation &: Rescheduling not permitted because of status |
| 751 | Order & operation/phase & second. resource &: No rem. avail. cap. avail. |
| 752 | Split & person/individual capacity &: Scheduling error |
| 753 | Order &: Scheduling not possible |
| 754 | Order & operation &: Dispatching not permitted because of status |
| 755 | Order & operation &: Deallocation not permitted because of status |
| 756 | Order & operation & have already been dispatched |
| 757 | Order & operation &: Dispatching/rescheduling was not carried out |
| 758 | Availability check for order & could not be carried out. |
| 759 | Order & has missing materials |
| 760 | No setup time optimization - you have selected dispatched operations |
| 761 | All materials required for order & are available. |
| 762 | Order & operation & shifted due to operation sequence |
| 763 | Order & operation &: Planning step was undone (UNDO) |
| 764 | Order & operation &: Work center & is not allowed (Resource selection) |
| 765 | All rescheduling was undone (UNDO) |
| 766 | Order & Operation &: Displayed dates of operation cannot be changed |
| 767 | Order & operation/phase &: Errors when scheduling subobjects |
| 768 | Setup transitions are forbidden for all operations already dispatched |
| 769 | Dispatch at best time for setup: select one operation only |
| 770 | Setup optimiz.: syst.cannot find solution without forbidd. setup transit. |
| 800 | * entries for CY01_S_MESSAGE_SET * |
| 801 | You should look in the scheduling log and the planning log |
| 802 | You should look in the planning log |
| 803 | You should look in the scheduling log |
| 804 | Error when dispatching. You should look in the log. |
| 805 | Dispatching carried out successfully |
| 806 | Function not possible since no objects were selected |
| 807 | Function not possible since no relevant objects were selected |
| 808 | Current planning saved |
| 809 | There is no scheduling log |
| 810 | Function not possible |
| 811 | Function for the selected objects not possible |
| 812 | No planning log exists |
| 813 | No inspection characteristics |
| 814 | No inspection plan found |
| 815 | No time events |
| 816 | Partial lot does not exist |
| 817 | Work center not unambiguous |
| 818 | This function is not intended for maintenance orders |
| 819 | This function is not intended for networks |
| 820 | Assignment of requirements grouping & to a line is not possible |
| 821 | Selected date &1 is before the start of the time axis &2 |
| 822 | Chosen date &1 is near the end of the time axis &2 |
| 823 | No capacity available at selected work center |
| 824 | Saving not possible. Last saving operation still running. |
| 825 | No data exists to be saved. |
| 826 | Data was saved. |
| 827 | Function cannot be executed on the planning tables |
| 829 | No saving log exists |
| 830 | Data was saved. Look at the saving log. |
| 831 | Dispatching sequence: Structure &1 is not currently supported |
| 850 | *-----------------------------------------------------------------------* |
| 851 | *-- Fixed planning areas |
| 852 | *-----------------------------------------------------------------------* |
| 853 | Time interval not correct. |
| 854 | Start of period before start of planning period. |
| 855 | Fixing area after end of planning period |
| 856 | Interval entered already exists |
| 857 | Entry saved |
| 858 | No current profile found for the planning period |
| 859 | There is no planning profile |
| 860 | Layout keys have different number of fields |
| 861 | No fields have been maintained for the sort key |
| 862 | No sort keys defined for grouping |
| 863 | No sort key found for sort |
| 864 | Requirements group not found in requirements grouping |
| 865 | No status assignements defined in selection profile |
| 866 | The boolean expression for selection profile is corrupted |
| 867 | No field was assigned to this index |
| 868 | Index refers to a non-data field |
| 869 | Selection profile does not exist |
| 870 | Distribution key does not exist |
| 871 | Sort key does not exist |
| 872 | Graphical element not found |
| 873 | Form category not found |
| 874 | Color category not found |
| 875 | Object representation in graphical object type not found |
| 876 | No fields found for layout key |
| 877 | Sort not found |
| 878 | Color definition does not exist |
| 879 | Form group not found |
| 880 | No form categories found for form group |
| 881 | Form definition not found |
| 882 | Grouping not found |
| 883 | Set does not exist |
| 884 | Requirements grouping does not exist |
| 885 | Object representation selection not found |
| 886 | Representation profile not found |
| 887 | Selected capacity contains no requirements |
| 888 | No dispatched operations for selected capacity |
| 889 | Operations in fixed planning areas cannot be rescheduled |
| 890 | Operations in fixed time periods cannot be deallocated |
| 891 | Operation moved because of a fixed time period |
| 892 | Planning direction was changed. |
| 893 | Not all groups for requirements grouping are used |
| 894 | Inconsistent basic load structure for the capacities |
| 895 | Maximum number of splits (254) reached |
| 896 | The selected person is not qualified |
| 897 | The capacity requirements cannot be displayed in the unit & |